Mathematical and numerical methods for inverse problems using fundamental solutions techniques

Fundação para a Ciência e a Tecnologia - SFRH/BD/27914/2006

Thermo-hydro-mechanical analysis of CO2 injection into deep aquifers

One of the biggest challenges for humanity is global warming and consequently, climate changes. Even though there has been increasing public awareness and investments from numerous countries concerning renewable energies, fossil fuels are and will continue to be in the near future, the main source of energy. Carbon capture and storage (CCS) is believed to be a serious measure to mitigate CO2 concentration. CCS briefly consists of capturing CO2 from the atmosphere or stationary emission sources and transporting and storing it via mineral carbonation, in oceans or geological media. The latter is referred to as carbon capture and geological storage (CCGS) and is considered to be the most promising of all solutions. Generally it consists of a storage (e.g. depleted oil reservoirs and deep saline aquifers) and sealing (commonly termed caprock in the oil industry) formations. The present study concerns the injection of CO2 into deep aquifers and regardless injection conditions, temperature gradients between carbon dioxide and the storage formation are likely to occur. Should the CO2 temperature be lower than the storage formation, a contractive behaviour of the reservoir and caprock is expected. The latter can result in the opening of new paths or re-opening of fractures, favouring leakage and compromising the CCGS project. During CO2 injection, coupled thermo-hydro-mechanical phenomena occur, which due to their complexity, hamper the assessment of each relative influence. For this purpose, several analyses were carried out in order to evaluate their influences but focusing on the thermal contractive behaviour. It was finally concluded that depending on mechanical and thermal properties of the pair aquifer-seal, the sealing caprock can undergo significant decreases in effective stress.

Analysis, testing and development of safe cleaning methods of rusted stone material

Three different treatments were applied on several specimens of dolomitic and calcitic marble, properly stained with rust to mimic real situations (the stone specimens were exposed to the natural environment for about six months in contact with rusted iron). Thirty six marble specimens, eighteen calcitic and eighteen dolomitic, were characterized before and after treatment and monitored throughout the cleaning tests. The specimens were characterized by SEM-EDS (Scanning Electron Microscopy coupled with Energy Dispersion System), XRD (XRay Diffraction), XRF (X-Ray Fluorescence), FTIR (Fourier Transform Infrared Spectroscopy) and color measurements. It was also made a microscopic and macroscopic analysis of the stone surface along with the tests of short and long term capillary absorption. A series of test trials were conducted in order to understand which concentrations and contact times best suits to this purpose, to confirm what had been written to date in the literature. We sought to develop new methods of treatment application, skipping the usual methods of applying chemical treatments on stone substrates, with the use of cellulose poultice, resorting to the agar, a gel already used in many other areas, being something new in this area, which possesses great applicability in the field of conservation of stone materials. After the application of the best methodology for cleaning, specimens were characterized again in order to understand which treatment was more effective and less harmful, both for the operator and the stone material. Very briefly conclusions were that for a very intense and deep penetration into the stone, a solution of 3.5% of SDT buffered with ammonium carbonate to pH around 7 applied with agar support would be indicated. For rust stains in its initial state, the use of Ammonium citrate at a concentration of 5% buffered with ammonium to pH 7 could be applied more than once until satisfactory results appear.

Mechanical characterization of aortas using 2D ultrasound elastography

Rupture of aortic aneurysms (AA) is a major cause of death in the Western world. Currently, clinical decision upon surgical intervention is based on the diameter of the aneurysm. However, this method is not fully adequate. Noninvasive assessment of the elastic properties of the arterial wall can be a better predictor for AA growth and rupture risk. The purpose of this study is to estimate mechanical properties of the aortic wall using in vitro inflation testing and 2D ultrasound (US) elastography, and investigate the performance of the proposed methodology for physiological conditions. Two different inflation experiments were performed on twelve porcine aortas: 1) a static experiment for a large pressure range (0 – 140 mmHg); 2) a dynamic experiment closely mimicking the in vivo hemodynamics at physiological pressures (70 – 130 mmHg). 2D raw radiofrequency (RF) US datasets were acquired for one longitudinal and two cross-sectional imaging planes, for both experiments. The RF-data were manually segmented and a 2D vessel wall displacement tracking algorithm was applied to obtain the aortic diameter–time behavior. The shear modulus G was estimated assuming a Neo-Hookean material model. In addition, an incremental study based on the static data was performed to: 1) investigate the changes in G for increasing mean arterial pressure (MAP), for a certain pressure difference (30, 40, 50 and 60 mmHg); 2) compare the results with those from the dynamic experiment, for the same pressure range. The resulting shear modulus G was 94 ± 16 kPa for the static experiment, which is in agreement with literature. A linear dependency on MAP was found for G, yet the effect of the pressure difference was negligible. The dynamic data revealed a G of 250 ± 20 kPa. For the same pressure range, the incremental shear modulus (Ginc) was 240 ± 39 kPa, which is in agreement with the former. In general, for all experiments, no significant differences in the values of G were found between different image planes. This study shows that 2D US elastography of aortas during inflation testing is feasible under controlled and physiological circumstances. In future studies, the in vivo, dynamic experiment should be repeated for a range of MAPs and pathological vessels should be examined. Furthermore, the use of more complex material models needs to be considered to describe the non-linear behavior of the vascular tissue.

Influence of the molecular weight in mechanical properties and degradation kinetics of chitosan inverted colloidal crystals

Tissue engineering arises from the need to regenerate organs and tissues, requiring the development of scaffolds, which can provide an optimum environment for tissue growth. In this work, chitosan with different molecular weights was used to develop biodegradable 3D inverted colloidal crystals (ICC) structures for bone regeneration, exhibiting uniform pore size and interconnected network. Moreover, in vitro tests were conducted by studying the influence of the molecular weight in the degradation kinetics and mechanical properties. The production of ICC included four major stages: fabrication of microspheres; assembly into a cohesive structure, polymeric solution infiltration and microsphere removal. Chitosan’s degree of deacetylation was determined by infrared spectroscopy and molecular weight was obtained via capillary viscometry. In order to understand the effect of the molecular weight in ICC structures, the mass loss and mechanical properties were analyzed after degradation with lysozyme. Structure morphology observation before and after degradation was performed by scanning electron microscopy. Cellular adhesion and proliferation tests were carried out to evaluate ICC in vitro response. Overall, medium molecular weight ICC revealed the best balance in terms of mechanical properties, degradation rate, morphology and biological behaviour.

Gas tungsten arc welding of NiTi shape memory alloy

Shape memory alloys are characterized by the ability of recovering their initial shape after being deformed and by superelasticity. Since the discovery of these alloys, a new field of interest emerged not only for the scientific community but also to many industries. However, these alloys present poor machinability which constitute a constrain in the design of complex components for new applications. Thus, the demand for joining techniques able to join these alloys without compromising their properties became of great importance to enlarge the complexity of existing applications. Literature shows that these alloys are joined mainly using laser welding. In the present study, similar NiTi butt joints, were produced using TIG welding. The welds were performed in 1.5 mm thick plates across the rolling direction. A special fixture and gas assist device was designed and manufactured. Also a robot arm was adapted to accommodate the welding torch to assure the repeatability of the welding parameters. Welds were successfully achieved without macroscopic defects, such as pores and distortions. Very superficial oxidation was seen on the top surface due to insufficient shielding gas flow on the weld face. The welded joints were mechanically tested and structurally characterized. Testing methods were used to evaluate macro and microstructure, as well as the phase transformation temperatures, the mechanical single and cyclic behaviour and the shape recovery ability. Differential Scanning Calorimetry (DSC), Scanning Electron Microscopy (SEM), Energy Dispersive Spectroscopy (EDS), microhardness measurements were techniques also used to evaluate the welded joints. A depletion in Ni in the fusion zone was seen, as well as a shift in Ms temperature. For strain values of 4% the accumulated irrecoverable strain was of about 30% and increased with the strain imposed during cycling. Nevertheless, a complete recovery of initial shape was observed when testing the shape memory effect on a dedicated device that introduces a deformation of 6.7%. That is, the welding procedure does not remove the ability of the specimens to recover their initial shape.

Barriers preventing the successful integration of mental health services into Primary Health Care in Nigeria : a mixed methods approach

RESUMO: A Nigéria tem uma população estimada em cerca de 170 milhões de pessoas. O número de profissionais de saúde mental é muito diminuto, contando apenas com 150 psiquiatras o que perfaz aproximadamente um rácio de psiquiatra: população de mais de 1:1 milhão de pessoas. O Plano Nacional de Saúde Mental de 1991 reconheceu esta insuficiência e recomendou a integração dos serviços de saúde mental nos cuidados de saúde primários (CSP). Depois de mais de duas décadas, essa política não foi ainda implementada. Este estudo teve como objetivos mapear a estrutura organizacional dos serviços de saúde mental da Nigéria, e explorar os desafios e barreiras que impedem a integração bem-sucedida dos serviços de saúde mental nos cuidados de saúde primários, isto segundo a perspectiva dos profissionais dos cuidados de saúde primários. Com este objetivo, desenvolveu-se um estudo exploratório sequencial e utilizou-se um modelo misto para a recolha de dados. A aplicação em simultâneo de abordagens qualitativas e quantitativas permitiram compreender os problemas relacionados com a integração dos serviços de saúde mental nos CSP na Nigéria. No estudo qualitativo inicial, foram realizadas entrevistas com listagens abertas a 30 profissionais dos CSP, seguidas de dois grupos focais com profissionais dos CSP de duas zonas governamentais do estado de Oyo de forma a obter uma visão global das perspectivas destes profissionais locais sobre os desafios e barreiras que impedem uma integração bem-sucedida dos serviços de saúde mental nos CSP. Subsequentemente, foram realizadas entrevistas com quatro pessoas-chave, especificamente coordenadores e especialistas em saúde mental. Os resultados do estudo qualitativo foram utilizados para desenvolver um questionário para análise quantitativa das opiniões de uma amostra maior e mais representativa dos profissionais dos CSP do Estado de Oyo, bem como de duas zonas governamentais locais do Estado de Osun. As barreiras mais comummente identificadas a partir deste estudo incluem o estigma e os preconceitos sobre a doença mental, a formação inadequada dos profissionais dos CPS sobre saúde mental, a perceção pela equipa dos CSP de baixa prioridade de ação do Governo, o medo da agressão e violência pela equipa dos CSP, bem como a falta de disponibilidade de fármacos. As recomendações para superar estes desafios incluem a melhoria sustentada dos esforços da advocacia à saúde mental que vise uma maior valorização e apoio governamental, a formação e treino organizados dos profissionais dos cuidados primários, a criação de redes de referência e de apoio com instituições terciárias adjacentes, e o engajamento da comunidade para melhorar o acesso aos serviços e à reabilitação, pelas pessoas com doença mental. Estes resultados fornecem indicações úteis sobre a perceção das barreiras para a integração bem sucedida dos serviços de saúde mental nos CSP, enquanto se recomenda uma abordagem holística e abrangente. Esta informação pode orientar as futuras tentativas de implementação da integração dos serviços de saúde mental nos cuidados primários na Nigéria.------------ABSTRACT: Nigeria has an estimated population of about 170 million people but the number of mental health professionals is very small, with about 150 psychiatrists. This roughly translates to a psychiatrist:population ratio of more than 1:1 million people. The National Mental Health Policy of 1991 recognized this deficiency and recommended the integration of mental health into primary health care (PHC) delivery system. After more than two decades, this policy has yet to be implemented. This study aimed to map out the organizational structure of the mental health systems in Nigeria, and to explore the challenges and barriers preventing the successful integration of mental health into primary health care, from the perspective of the primary health care workers. A mixed methods exploratory sequential study design was employed, which entails the use of sequential timing in the combined methods of data collection. A combination of qualitative and uantitative approaches in sequence, were utilized to understand the problems of mental health services integration into PHC in Nigeria. The initial qualitative phase utilized free listing interviews with 30 PHC workers, followed by two focus group discussions with primary care workers from two Local Government Areas (LGA) of Oyo State to gain useful insight into the local perspectives of PHC workers about the challenges and barriers preventing successful integration of mental health care services into PHC. Subsequently, 4 key informant interviews with PHC co-ordinators and mental health experts were carried out. The findings from the qualitative study were utilized to develop a quantitative study questionnaire to understand the opinions of a larger and more representative sample of PHC staff in two more LGAs of Oyo State, as well as 2 LGAs from Osun State. The common barriers identified from this study include stigma and misconceptions about mental illness, inadequate training of PHC staff about mental health, low government priority, fear of aggression and violence by the PHC staff, as well as non-availability of medications. Recommendations for overcoming these challenges include improved and sustained efforts at mental health advocacy to gain governmental attention and support, organized training and retraining for primary care staff, establishment of referral and supportive networks with neighbouring tertiary facilities and community engagement to improve service utilization and rehabilitation of mentally ill persons. These findings provide useful insight into the barriers to the successful integration of mental health into PHC, while recommending a holistic and comprehensive approach. This information can guide future attempts to implement the integration of mental health into primary care in Nigeria.

How do current term structure model behave beyond the last liquid point?: A comparison of the DNS and Smith-Wilson methods

A Work Project, presented as part of the requirements for the Award of a Master’s Double Degree in Finance from Maastricht University and NOVA – School of Business and Economics

Património Cultural Imaterial: MEMORIAMEDIA e-Museu - métodos, técnicas e práticas / Intagible Cultural Heritage: MEMORIAMEDIA e-Museum - methods, techniques and practices

O projeto MEMORIAMEDIA tem como objetivos o estudo, a inventariação e divulgação de manifestações do património cultural imaterial: expressões orais; práticas performativas; celebrações; o saber-fazer de artes e ofícios e as práticas e conhecimentos relacionados com a natureza e o universo. O MEMORIAMEDIA iniciou em 2006, em pleno debate nacional e internacional das questões do património cultural imaterial. Este livro cruza essas discussões teóricas, metodológicas e técnicas com a caracterização do MEMORIAMEDIA. Os resultados do projeto, organizados num inventário nacional, estão publicados no site www.memoriamedia.net, onde se encontram disponíveis para consulta e partilha. Filomena Sousa é investigadora de pós-doutoramento em antropologia (FCSH/UNL) e doutorada em sociologia (ISCTE-IUL). Membro integrado no Instituto de Estudos de Literatura e Tradição - patrimónios, artes e culturas (IELT) da FCSH/UNL e consultora da Memória Imaterial CRL – organização não-governamental autora e gestora do projeto MEMORIAMEDIA. Desenvolve investigação no âmbito das políticas e instrumentos de identificação, documentação e salvaguarda do património cultural imaterial e realizou vários documentários sobre expressões culturais.

Electrohysterogram signal component cataloging with spectral and time-frequency methods

The Electrohysterogram (EHG) is a new instrument for pregnancy monitoring. It measures the uterine muscle electrical signal, which is closely related with uterine contractions. The EHG is described as a viable alternative and a more precise instrument than the currently most widely used method for the description of uterine contractions: the external tocogram. The EHG has also been indicated as a promising tool in the assessment of preterm delivery risk. This work intends to contribute towards the EHG characterization through the inventory of its components which are: • Contractions; • Labor contractions; • Alvarez waves; • Fetal movements; • Long Duration Low Frequency Waves; The instruments used for cataloging were: Spectral Analysis, parametric and non-parametric, energy estimators, time-frequency methods and the tocogram annotated by expert physicians. The EHG and respective tocograms were obtained from the Icelandic 16-electrode Electrohysterogram Database. 288 components were classified. There is not a component database of this type available for consultation. The spectral analysis module and power estimation was added to Uterine Explorer, an EHG analysis software developed in FCT-UNL. The importance of this component database is related to the need to improve the understanding of the EHG which is a relatively complex signal, as well as contributing towards the detection of preterm birth. Preterm birth accounts for 10% of all births and is one of the most relevant obstetric conditions. Despite the technological and scientific advances in perinatal medicine, in developed countries, prematurity is the major cause of neonatal death. Although various risk factors such as previous preterm births, infection, uterine malformations, multiple gestation and short uterine cervix in second trimester, have been associated with this condition, its etiology remains unknown [1][2][3].

Production of polyhydroxyalkanoates from oil-containing substrates

Different oil-containing substrates, namely, used cooking oil (UCO), fatty acids-byproduct from biodiesel production (FAB) and olive oil deodorizer distillate (OODD) were tested as inexpensive carbon sources for the production of polyhydroxyalkanoates (PHA) using twelve bacterial strains, in batch experiments. The OODD and FAB were exploited for the first time as alternative substrates for PHA production. Among the tested bacterial strains, Cupriavidus necator and Pseudomonas resinovorans exhibited the most promising results, producing poly-3-hydroxybutyrate, P(3HB), form UCO and OODD and mcl-PHA mainly composed of 3-hydroxyoctanoate (3HO) and 3-hydroxydecanoate (3HD) monomers from OODD, respectively. Afterwards, these bacterial strains were cultivated in bioreactor. C. necator were cultivated in bioreactor using UCO as carbon source. Different feeding strategies were tested for the bioreactor cultivation of C. necator, namely, batch, exponential feeding and DO-stat mode. The highest overall PHA productivity (12.6±0.78 g L-1 day-1) was obtained using DO-stat mode. Apparently, the different feeding regimes had no impact on polymer thermal properties. However, differences in polymer‟s molecular mass distribution were observed. C. necator was also tested in batch and fed-batch modes using a different type of oil-containing substrate, extracted from spent coffee grounds (SCG) by super critical carbon dioxide (sc-CO2). Under fed-batch mode (DO-stat), the overall PHA productivity were 4.7 g L-1 day-1 with a storage yield of 0.77 g g-1. Results showed that SCG can be a bioresource for production of PHA with interesting properties. Furthermore, P. resinovorans was cultivated using OODD as substrate in bioreactor under fed-batch mode (pulse feeding regime). The polymer was highly amorphous, as shown by its low crystallinity of 6±0.2%, with low melting and glass transition temperatures of 36±1.2 and -16±0.8 ºC, respectively. Due to its sticky behavior at room temperature, adhesiveness and mechanical properties were also studied. Its shear bond strength for wood (67±9.4 kPa) and glass (65±7.3 kPa) suggests it may be used for the development of biobased glues. Bioreactor operation and monitoring with oil-containing substrates is very challenging, since this substrate is water immiscible. Thus, near-infrared spectroscopy (NIR) was implemented for online monitoring of the C. necator cultivation with UCO, using a transflectance probe. Partial least squares (PLS) regression was applied to relate NIR spectra with biomass, UCO and PHA concentrations in the broth. The NIR predictions were compared with values obtained by offline reference methods. Prediction errors to these parameters were 1.18 g L-1, 2.37 g L-1 and 1.58 g L-1 for biomass, UCO and PHA, respectively, which indicates the suitability of the NIR spectroscopy method for online monitoring and as a method to assist bioreactor control. UCO and OODD are low cost substrates with potential to be used in PHA batch and fed-batch production. The use of NIR in this bioprocess also opened an opportunity for optimization and control of PHA production process.

Damage propagation in composite Materials meso-mechanical models

Composite materials have a complex behavior, which is difficult to predict under different types of loads. In the course of this dissertation a methodology was developed to predict failure and damage propagation of composite material specimens. This methodology uses finite element numerical models created with Ansys and Matlab softwares. The methodology is able to perform an incremental-iterative analysis, which increases, gradually, the load applied to the specimen. Several structural failure phenomena are considered, such as fiber and/or matrix failure, delamination or shear plasticity. Failure criteria based on element stresses were implemented and a procedure to reduce the stiffness of the failed elements was prepared. The material used in this dissertation consist of a spread tow carbon fabric with a 0°/90° arrangement and the main numerical model analyzed is a 26-plies specimen under compression loads. Numerical results were compared with the results of specimens tested experimentally, whose mechanical properties are unknown, knowing only the geometry of the specimen. The material properties of the numerical model were adjusted in the course of this dissertation, in order to find the lowest difference between the numerical and experimental results with an error lower than 5% (it was performed the numerical model identification based on the experimental results).

Distúrbios osteomioarticulares : lombalgia e escoliose : prevalência e fatores associados : um estudo analítico e transversal em adolescentes da região do Algarve

RESUMO - Introdução: Os distúrbios osteomioarticulares envolvem diversas condições donde se destacam a lombalgia e a escoliose, a primeira considerando o fato que a sua prevalência tem vindo a aumentar em adolescentes consistindo num problema crescente de saúde pública que envolve custos indiretos e a escoliose pela ausência de estudos nacionais. Diversos fatores físicos, genéticos, mecânicos, comportamentais e ambientais podem estar envolvidos na patogénese das lombalgias e escolioses. O ambiente escolar, incluindo as posturas adotadas pelos alunos e o transporte das mochilas escolares, e alguns hábitos de estilos de vida constituem fatores que podem contribuir para o desenvolvimento destes distúrbios osteomioarticulares. Este estudo também aborda o estado ponderal, nomeadamente o excesso de peso e a obesidade, pois este é referido frequentemente como um potencial fator de risco destes distúrbios osteomioarticulares (apesar de ainda apresentar controvérsia na literatura), além de ser, por si só, atualmente considerado como um dos mais graves problemas de saúde pública a nível mundial. Objetivos do estudo: (1) determinar a prevalência pontual, anual e ao longo da vida de lombalgia, assim como a prevalência de escoliose em adolescentes da região do Algarve; (2) identificar os fatores associados ao desenvolvimento destes distúrbios osteomioarticulares; (3) determinar a prevalência de excesso de peso e de obesidade e explorar a sua eventual associação com a prevalência de lombalgia e escoliose em adolescentes; (4) comparar os resultados obtidos nos diferentes métodos antropométricos (Índice de massa corporal - IMC, medição das pregas cutâneas e circunferência abdominal) e verificar a sua concordância. Material e métodos: O desenho deste estudo foi de natureza observacional, analítico e transversal. O estudo foi aprovado pela Comissão de Ética da Administração Regional de Saúde do Algarve, pela Direção Regional de Educação do Algarve, pela Direção-Geral de Inovação e de Desenvolvimento Curricular, Ministério da Educação e Ciência, e pelas Direções dos Agrupamentos de Escolas que participaram do projeto. A amostra incluiu 966 adolescentes da região do Algarve, sul de Portugal, com idades compreendidas entre os 10 e 16 anos (12,24±1,53 anos), sendo 437 (45,2%) do sexo masculino e 529 (54,8%) do feminino. O método de amostragem foi aleatório estratificado, com base nos concelhos da região do Algarve, assumindo que poderia existir heterogeneidades geográficas. Os instrumentos de medida foram aplicados num único momento (2011/2012) e incluíram o Questionário de Lombalgia e Hábitos Posturais para caracterizar a presença de lombalgia e os hábitos posturais adotados pelos alunos em casa e na escola, o escoliómetro para avaliar a presença de escoliose, a balança, o estadiómetro (sendo posteriormente calculado o IMC), o adipómetro e a fita métrica. A análise dos dados incluiu técnicas de estatística descritiva, gráficas e analíticas aplicadas à todas as variáveis em estudo. Para determinar a associação entre as variáveis do estudo foi utilizada a estatística inferencial, nomeadamente o teste de independência do Qui-quadrado. Para analisar as correlações entre as medidas obtidas com os métodos antropométricos (na sua forma quantitativa), foi utilizado o coeficiente de Spearman. A influência das diversas variáveis na presença de lombalgia foi aferida através de regressões logísticas binárias, sendo os resultados apresentados como odds ratios brutos e ajustados e respetivos intervalos de confiança. Resultados: O presente estudo revelou uma elevada prevalência de lombalgia (anual: 47,2%; pontual: 15,7%; ao longo da vida: 62,1%). As raparigas apresentaram 2,05 de probabilidade de apresentar lombalgia comparativamente aos rapazes (IC 95%: 1,58-2,65; p<0,001), assim como os alunos com idades mais avançadas (13-16 anos) comparativamente aos mais novos (10-12 anos) que tiveram 1,54 de chances (IC 95%: 1,19-1,99; p=0,001). Os alunos que indicaram adotar uma postura de sentado com a coluna vertebral posicionada incorretamente apresentaram 2,49 de probabilidade de revelar lombalgia (IC 95%: 1,91-3,24; p<0,001), os alunos que afirmaram se posicionar de forma inadequada para assistir televisão ou jogar videojogos tiveram a probabilidade de 2,01 (IC 95%: 1,55- 2,61; p<0,001) e aqueles que adotaram a postura de pé incorretamente tiveram 3,39 de chance de apresentar lombalgia (IC 95%: 2,19-5,23; p<0,001). A escoliose esteve presente em 41 (4,2%) alunos. As raparigas apresentaram a maior prevalência (4,5% versus 3,9%) do que os rapazes e o mesmo foi observado nas raparigas que apresentaram a menarca tardia (8,6% versus 3,3%) e os que foram classificados como magros (7,1%), não sendo no entanto estas diferenças estatisticamente significativas. Relativamente à prevalência de excesso de peso e obesidade, os valores variaram de 31,6%, 61,4% e 41,1% de acordo com a medição do IMC, pregas cutâneas e circunferência abdominal, respetivamente. Os valores obtidos com a avaliação dos três métodos antropométricos apresentaram um elevado alto grau de correlação entre o IMC e as pregas cutâneas (p<0,001; r=0,712), entre o IMC e circunferência abdominal (p<0,001; r=0,884) e entre a circunferência abdominal e as pregas cutâneas (p<0,001; r=0,701). Conclusões: O presente estudo revelou valores de prevalência de lombalgia semelhante a estudos anteriores sendo que os alunos com idade mais avançada, ou do sexo feminino ou aqueles que adotavam a postura sentada e de pé de forma inadequada ou os que transportavam indevidamente a mochila escolar apresentaram a maior prevalência. Quanto à presença de escoliose, observou-se uma baixa prevalência não sendo verificada nenhuma associação significativa com os fatores analisados. Relativamente ao estado ponderal, verificou-se uma elevada prevalência de excesso de peso e obesidade, com a utilização dos três métodos antropométricos: IMC, medição das pregas cutâneas e circunferência abdominal, tendo sido verificado um elevado grau de correlação entre estes três métodos antropométricos. Este estudo contribuiu para determinar a magnitude destes distúrbios osteomiarticulares nesta população específica, assim como seus possíveis fatores associados. De acordo os resultados obtidos no presente estudo, torna-se necessário ações de intervenção nas escolas, envolvendo não somente os alunos, mas toda a comunidade escolar, com o objetivo de prevenção destes distúrbios osteomioarticulares através da promoção de hábitos de vida saudável.

Mapping the Pasture Steppe in Bayankhongor, Mongolia: comparison of classification methods, using Landsat-8 and geophysical data

Grasslands in semi-arid regions, like Mongolian steppes, are facing desertification and degradation processes, due to climate change. Mongolia’s main economic activity consists on an extensive livestock production and, therefore, it is a concerning matter for the decision makers. Remote sensing and Geographic Information Systems provide the tools for advanced ecosystem management and have been widely used for monitoring and management of pasture resources. This study investigates which is the higher thematic detail that is possible to achieve through remote sensing, to map the steppe vegetation, using medium resolution earth observation imagery in three districts (soums) of Mongolia: Dzag, Buutsagaan and Khureemaral. After considering different thematic levels of detail for classifying the steppe vegetation, the existent pasture types within the steppe were chosen to be mapped. In order to investigate which combination of data sets yields the best results and which classification algorithm is more suitable for incorporating these data sets, a comparison between different classification methods were tested for the study area. Sixteen classifications were performed using different combinations of estimators, Landsat-8 (spectral bands and Landsat-8 NDVI-derived) and geophysical data (elevation, mean annual precipitation and mean annual temperature) using two classification algorithms, maximum likelihood and decision tree. Results showed that the best performing model was the one that incorporated Landsat-8 bands with mean annual precipitation and mean annual temperature (Model 13), using the decision tree. For maximum likelihood, the model that incorporated Landsat-8 bands with mean annual precipitation (Model 5) and the one that incorporated Landsat-8 bands with mean annual precipitation and mean annual temperature (Model 13), achieved the higher accuracies for this algorithm. The decision tree models consistently outperformed the maximum likelihood ones.