NHL 3.5 mortars with scrap tire rubber

The use of wastes and industrial by-products as building materials is an important issue in order to decrease costs with waste management and the embodied energy of building products. Scrap tire rubber has been studied as aggregate for cementitious materials. Natural hydraulic limes are natural binders with particular characteristics of both air and hydraulic binders. Their specifications became stricter with the last version of EN 459-1:2010. In this study scrap tire rubber was used as additional aggregate of mortars, based on NHL3.5 and natural sand. Different particle size fractions and proportions of scrap tire rubber were used: a mix obtained almost directly from industry (only after sieving for preparation of particle sizes similar to mortar aggregate) and separated fine, medium and coarse fractions; 0%, 18%, 36% and 54% weight of binder, corresponding to 2.5%, 5% and 7.5% weight of sand. The influence of the rubbers´ additions on the mortars´ fresh state, mechanical and physical performance is presented, namely by flow table consistency, water retention, fresh bulk density, dynamic elasticity modulus, flexural and compressive strength, open porosity and bulk density, capillary absorption, drying and thermal conductivity. The use of the rubber mix coming from the waste tire industry seems advantageous and may open possibilities for use as raw material by the mortars industry.

Optimal choice between even- and uneven-aged forestry: the case of non-industrial private forest owners

An infinite-horizon discrete time model with multiple size-class structures using a transition matrix is built to assess optimal harvesting schedules in the context of Non-Industrial Private Forest (NIPF) owners. Three model specifications accounting for forest income, financial return on an asset and amenity valuations are considered. Numerical simulations suggest uneven-aged forest management where a rational forest owner adapts her or his forest policy by influencing the regeneration of trees or adjusting consumption dynamics depending on subjective time preference and market return rate dynamics on the financial asset. Moreover she or he does not value significantly non-market benefits captured by amenity valuations relatively to forest income.

Do the psychological impacts of war cause poverty?: Evidence from Mozambique

This paper evaluates the extent to which war-related psychological distress causes poverty. The endogeneous nature of mental distress is addressed by using exposure to the civil war in Mozambique as an instrument. It is found that exposure to war has a significant and positive long-lasting impact on mental distress. Furthermore, the causal impact of war-related psychological distress on income and wealth is shown to be significant, negative, and nonnegligible. One standard deviation increase in mental distress decreases income by half a standard deviation. These findings are robust to alternative specifications, including the use of an alternative database on the incidence of PTSD in Mozambique.

Brazilian equity risk premium analysis: A macroeconomic approach

Double Degree Masters in Economics Program from Insper and NOVA School of Business and Economics

A harmonização fiscal europeia

With this dissertation we aim to analyze the most relevant aspects of the excise duties harmonized regime, considering Community origins, but having also in attention all legal specifications of its implementation in Portugal. The legal regime of excise duties is presented as an ambitious theme, considering the challenge of different branches of law that influence this subject, such as Tax, Economic and Community laws, the inescapable influence of customs procedures, or regarding environmental objectives. In the European context, the harmonization of excise duties was seen as a condition for the implementation of the internal market, contributing to undo secular tax barriers between Member States and, since so, ensure fair competition and free movement of services and goods. Along with VAT, the excise duties harmonization process could represent a potential European tax system, essential for a full and integrated single market. In this context, it is essential to pay special attention to specific characteristics of excise duties regime, such as ‘duty suspension arrangement’ applicable during the production phase, storage and movement in certain conditions. The growing importance of excise duties, as for revenue or extra-fiscal purposes, recommends new academic studies on this subject, seeking new opportunities and challenges.

Credit default swap (CDS) prediction model & trading strategy

This project focuses on the study of different explanatory models for the behavior of CDS security, such as Fixed-Effect Model, GLS Random-Effect Model, Pooled OLS and Quantile Regression Model. After determining the best fitness model, trading strategies with long and short positions in CDS have been developed. Due to some specifications of CDS, I conclude that the quantile regression is the most efficient model to estimate the data. The P&L and Sharpe Ratio of the strategy are analyzed using a backtesting analogy, where I conclude that, mainly for non-financial companies, the model allows traders to take advantage of and profit from arbitrages.

Structural transformation in the product space: Patterns and implications

Product fundamentals are essential in explaining heterogeneity in the product space. The scope for adapting and transferring capabilities into the production of different goods determines the speed and intensity of the structural transformation process and entails dissimilar development opportunities for nations. Future specialization patterns become then partly determined by the current network of products’ relatedness. Building on previous literature, this paper explicitly compares methodological concepts of product connectivity to conclude in favor of the density measure we propose combined with the Revealed Relatedness Index (RRI) approach presented by Freitas and Salvado (2011). Overall, RRI specifications displayed more consistent behavior when different time horizons are equated.

Compaction quality control on site of earthworks - A comparative study

The capacity to use geologic materials (soil and rock) that are available in the surrounding environment is inherent to the human civilization and has contributed to the evolution of societies throughout the course of history. The use of these materials in the construction of structures such as houses, roads, railways or dams, stirred the improvement of socioeconomic and environmental conditions. Several reports of structural problems on embankments can be found throughout history. A considerable number of those registers can be linked to inadequate compaction, demonstrating the importance of guaranteeing a suitable quality of soil compaction. Various methodologies and specifications of compaction quality control on site of earthworks, based on the fill moisture content and dry unit weight, were developed during the 20th century. Two widely known methodologies are the conventional and nuclear techniques. The conventional methods are based on the use of the field sand cone test (or similar) and sampling of material for laboratory-based testing to evaluate the fill dry unit weight and water content. The nuclear techniques measure both parameters in the field using a nuclear density gauge. A topic under discussion in the geotechnical community, namely in Portugal, is the comparison between the accuracy of the nuclear gauge and sand cone test results for assessing the compaction and density ratio of earth fills, particularly for dams. The main purpose of this dissertation is to compare both of them. The data used were acquired during the compaction quality control operations at the Coutada/Tamujais dam trial embankment and core construction. This is a 25 m high earth dam located in Vila Velha de Rodão, Portugal. To analyse the spatial distribution of the compaction parameters (water content and compaction ratio), a 3D model was also developed. The main results achieved are discussed and finally some considerations are put forward on the suitability of both techniques to ensure fill compaction quality and on additional research to complement the conclusions obtained.

Introducing mapping standards in the quality assessment of buildings extracted from very high resolution satellite imagery

Many municipal activities require updated large-scale maps that include both topographic and thematic information. For this purpose, the efficient use of very high spatial resolution (VHR) satellite imagery suggests the development of approaches that enable a timely discrimination, counting and delineation of urban elements according to legal technical specifications and quality standards. Therefore, the nature of this data source and expanding range of applications calls for objective methods and quantitative metrics to assess the quality of the extracted information which go beyond traditional thematic accuracy alone. The present work concerns the development and testing of a new approach for using technical mapping standards in the quality assessment of buildings automatically extracted from VHR satellite imagery. Feature extraction software was employed to map buildings present in a pansharpened QuickBird image of Lisbon. Quality assessment was exhaustive and involved comparisons of extracted features against a reference data set, introducing cartographic constraints from scales 1:1000, 1:5000, and 1:10,000. The spatial data quality elements subject to evaluation were: thematic (attribute) accuracy, completeness, and geometric quality assessed based on planimetric deviation from the reference map. Tests were developed and metrics analyzed considering thresholds and standards for the large mapping scales most frequently used by municipalities. Results show that values for completeness varied with mapping scales and were only slightly superior for scale 1:10,000. Concerning the geometric quality, a large percentage of extracted features met the strict topographic standards of planimetric deviation for scale 1:10,000, while no buildings were compliant with the specification for scale 1:1000.

Natural hydraulic lime (nhl3.5) mortars with scrap tire rubber

The use of wastes and industrial by-products as building materials is an important issue in order to decrease costs with waste management and the embodied energy of building products. In this study scrap tire rubber was used as additional aggregate of mortars based on natural hydraulic lime NHL 3.5 and natural sand. Different particle size fractions and proportions of scrap tire rubber were used: a mix obtained directly from industry and separated fine, medium and coarse fractions; 0 %, 18 %, 36 % and 54 % of the weight of binder, corresponding to 2.5 %, 5 % and 7.5 % of the weight of sand. As mortars based on NHL specifications became stricter with the current version of EN 459–1:2015, the influence of the rubber’s additions on the mortars’ fresh state, mechanical and physical performance is presented in this work: flow table consistency, water retention, dynamic elasticity modulus, flexural and compressive strength, open porosity and bulk density, capillary absorption, drying and thermal conductivity are studied. The use of the rubber mix coming from the waste tire industry seems advantageous and may open possibilities for use as raw material by the mortars industry.

A harmonização fiscal europeia

With this dissertation we aim to analyze the most relevant aspects of the excise duties harmonized regime, considering Community origins, but having also in attention all legal specifications of its implementation in Portugal. The legal regime of excise duties is presented as an ambitious theme, considering the challenge of different branches of law that influence this subject, such as Tax, Economic and Community laws, the inescapable influence of customs procedures, or regarding environmental objectives. In the European context, the harmonization of excise duties was seen as a condition for the implementation of the internal market, contributing to undo secular tax barriers between Member States and, since so, ensure fair competition and free movement of services and goods. Along with VAT, the excise duties harmonization process could represent a potential European tax system, essential for a full and integrated single market. In this context, it is essential to pay special attention to specific characteristics of excise duties regime, such as ‘duty suspension arrangement’ applicable during the production phase, storage and movement in certain conditions. The growing importance of excise duties, as for revenue or extra-fiscal purposes, recommends new academic studies on this subject, seeking new opportunities and challenges.