Saúde Mental em meio prisional : avaliação de necessidades de cuidados em reclusos com perturbação mental

RESUMO: A população prisional é constituída por indivíduos geralmente sujeitos a alguma forma de exclusão social e que apresentam problemas de saúde física e mental mais frequentes do que na população em geral. A prevalência mais elevada de perturbações mentais e de suicídio nos reclusos, em relação à população civil, é consensual e está demonstrada em numerosos estudos internacionais. O abuso/dependência de substâncias, a depressão, as psicoses e a perturbação anti-social de personalidade são as perturbações mais comuns na população prisional. As perturbações mentais são importantes factores de risco de suicídio, de vitimização, de reincidência e de reentrada no sistema prisional. Assim sendo, o grupo de reclusos com perturbação mental constitui um grupo de risco relevante. A avaliação de necessidades de cuidados foi iniciada no Reino Unido como um método para o planeamento, medição dos resultados e financiamento dos cuidados de saúde. Para esta avaliação foram desenvolvidos instrumentos que avaliam as necessidades em diversos domínios (clínicos e sociais) para aplicação aos utentes, cuidadores e profissionais. Até aos anos noventa, a avaliação de necessidades no contexto prisional incidia especialmente nas necessidades de segurança dos serviços, segundo a perspectiva dos profissionais. Contudo, a partir do relatório Reed (1992), sobre a situação dos reclusos com perturbação mental, verificou-se uma abordagem mais abrangente, que incluía a avaliação das necessidades de cuidados dos reclusos. Embora as necessidades dos reclusos com perturbação mental pareçam ser similares às dos doentes psiquiátricos em geral, existem diferenças em determinados domínios como a comorbilidade do eixo II, o abuso de substâncias e o risco de violência. Por este motivo, as necessidades de cuidados de saúde mental dos reclusos são elevadas e frequentemente não se encontram satisfeitas. De forma a incluir estas especificidades foi desenvolvida a versão forense do Camberwell Assessment of Need (CAN), designada por CAN - Forensic Version (CANFOR). Actualmente existe um consenso generalizado entre as instituições internacionais do dever de proporcionar aos reclusos cuidados de saúde, de prevenção e de tratamento, equivalentes aos cuidados disponíveis para a população civil - o princípio da equivalência de cuidados. A presente investigação pretendeu caracterizar e avaliar as necessidades de cuidados dos reclusos acompanhados nos serviços de psiquiatria prisionais na área da Grande Lisboa (internamento no Serviço de Psiquiatria do Hospital Prisional de S. João de Deus (HPSJD) e consultas nos Estabelecimentos Prisionais (EP) de Caxias e de Tires). De modo a estabelecer uma comparação com sujeitos civis foi seleccionada uma amostra de conveniência de pacientes acompanhados num departamento de psiquiatria da mesma região, segundo um emparelhamento por sexo, escalão etário, e por diagnóstico, num período de 3 meses. Realizou-se um estudo de tipo observacional, transversal e comparativo. Aplicaram-se os seguintes instrumentos de avaliação: questionário específico, Brief Psychiatric Rating Scale 4.0, Mini International Neuropsychiatric Interview 5.0.0, Global Assessment Functioning, CAN-R e CANFOR-R. No período do estudo (12 meses) foram assistidos 149 reclusos, dos quais, 35 (23,5%) não cumpriram os critérios de inclusão. A amostra final de reclusos (PRs) (n=114) foi constituída por 79 homens (69,3%) e 35 mulheres (30,7%), dos quais 77 eram condenados (67,5%) e 37 (32,5%) encontravam-se detidos preventivamente. A amostra final de participantes civis (PCs) foi constituída por 121 indivíduos, dos quais 76 eram homens (62,8%) e 45 eram mulheres (37,2%).A amostra final de participantes civis (PCs) foi constituída por 121 indivíduos, dos quais 76 eram homens (62,8%) e 45 eram mulheres (37,2%). Relativamente aos PRs, o diagnóstico mais frequente foi a Perturbação Anti-social da Personalidade (57,9%), seguida pela Depressão Major (56,1%). A maioria (53,5%) apresentava três ou mais categorias diagnósticas. Aproximadamente um terço dos PRs (30%) pontuou o nível elevado de risco de suicídio. A probabilidade deste risco aumentava, significativamente, nos portadores de Depressão Major, de um maior nível de psicopatologia e de uma condenação actual. Perto de metade dos PRs (47,4%) possuía duas ou mais condenações prévias e mais de metade estavam envolvidos em crimes contra pessoas (53,5%). A probabilidade de condenações múltiplas foi significativamente superior nos portadores de Perturbação Antisocial da Personalidade e nos reclusos com maior número de necessidades totais. Entre os PRs dos dois sexos, as principais diferenças significativas residiram na maior frequência de consumo de substâncias e no maior número de necessidades de cuidados nãosatisfeitas nos homens versus mulheres. A comparação entre os PRs, antes da detenção, e os PCs mostrou que os primeiros possuíam menor escolaridade, menos medicação psiquiátrica, mas mais emprego e mais consumos de substâncias ilícitas. A Perturbação Anti-social da Personalidade (OR=26,4; IC95%: 10,7-64,9), a Perturbação Pós-stress Traumático (OR=15,0; IC95%: 3,5-65,4), a Dependência/Abuso de Substâncias (OR=8,5; IC95%: 4,2-17,6) a Depressão Major (OR=2,6; IC95%: 1,5-4,4) e o Risco de Suicídio Elevado (OR=2,6; IC95%: 1,4-5,0) foram significativamente mais frequentes nos PRs versus PCs. Relativamente à avaliação de necessidades de cuidados, os PRs mostraram maior número de necessidades não-satisfeitas e maior necessidade de ajuda profissional, em relação aos PCs. Embora diversas necessidades não-satisfeitas possam resultar da condição de recluso, outras, em domínios da saúde física, da segurança do próprio e dos consumos tóxicos, poderão indicar que os PRs recebem um nível de cuidados inferior ao necessário, em comparação com os PCs. Os PRs apresentaram patologia mental, predominantemente não-psicótica e elevado risco de suicídio/auto-agressão, associado a depressão, necessidades de cuidados e uma pena de prisão. Possuíam, numa frequência elevada, características, consistentemente, associadas à reincidência criminal (personalidade anti-social, consumos tóxicos, condenações anteriores), pelo que se justifica um especial acompanhamento deste grupo, no período pré e pós-libertação. A comparação de necessidades de cuidados no contexto civil e prisional indica um maior nível de necessidades e um menor nível de cuidados recebidos pelos PRs, em relação aos PCs. O princípio da equivalência de cuidados poderá estar comprometido nos indivíduos reclusos com perturbação mental. A utilização do CANFOR foi fácil e poderá contribuir para um melhor planeamento, oferta e avaliação de resultados ao nível individual. Os PRs e PCs revelaram características clínicas e de necessidades muito diferentes entre si, pelo que, os reclusos com perturbação mental deverão ser assistidos em serviços de saúde mental preparados para abordar as suas especificidades.---------------ABSTRACT: The prison population is generally made up of individuals who are usually subject to some sort of social exclusion and who show physical and mental problems more frequently than the general population. Various international studies have found higher rates of mental disturbances and suicide within the prison population. The most common mental disturbances found are substance abuse or dependency, depression, psychosis, and anti-social personality disturbance. Such mental disturbances are important factors in suicide, victimization, delinquency recurrence, and the risk of reentry into prison. As a result, prison inmates with mental disturbances are a relevant at risk group. Assessment of needs of care first started in the United Kingdom as a method of care planning, results measuring and finance health care. The method involved the development of certain measuring instruments to be used by patients, caregivers and professionals in order to evaluate needs in various domains (clinical and social). Until the nineties, the assessment of needs of care in a prison context focused mainly on the service’s security needs. However, after the Reed (1992) report on mentally disturbed inmates, a much wider approach was considered, which included evaluation of the inmate’s needs of care. However similar mentally disturbed prison inmates’ needs may appear to those of other psychiatric patients, there are some differences in particular domains, namely, co-morbidity of Axis II, substance abuse and the risk of violence. For this reason, inmates’ mental health care needs are high and very often not met. In order to include these specificities, a forensic version of the Camberwell assessment of need (CAN,) designated CAN – Forensic version (CANFOR) was developed. There is now generalized consensus among international institutions of the duty under the equivalent health care principle to provide inmates with preventative health care and treatment, that are equivalent to the care available to the civil population. This investigation aims to characterize and assess the health care provision of prison inmates admitted to Lisbon’s Psychiatric Prison ward - the Psychiatric Ward of São João de Deus Hospital (HPSJD) - and inmates in the Caxias and Tires Prison Establishments (EP) undertaking outpatient treatment. In order to establish a comparison between prison and civilian patients, a convenience sample was selected from civilian patients being treated in a psychiatric ward in the same geographical area. This sample was paired by gender, age group and diagnosis during a three month period. The study was observational, transversal and comparative. The following measuring instruments were used: a purpose-built questionnaire, Brief Psychiatric Rating Scale 4.0, Mini International Neuropsychiatric Interview 5.0.0, Global Assessment Functioning Scale, CAN-R and CANFOR-R. During the research period (12 months), 149 inmates received care, of whom 35 (23.5%) did not comply with the prerequisite criteria of this study. The final sample of inmates (PRs) (n=114) comprised 79 men (69.3%) and 35 (30.7%) women, of whom 77 (67.5%) were convicted prisoners and 37 (32.5%) were in preventive custody. The final sample for Civilian Participants (PCs) was made up of 121 individuals, of whom 76 (62.8%) were men and 45 (37.2%) were women. The most common diagnosis among the PRs was Anti-Social Personality Disorder (57.9%), followed by Major Depression (56.1%). More than half of the subjects in the sample (53.5%) showed three or more diagnostic categories. Approximately one third (30%) of the PRs showed a high level of suicide risk. The probability of this risk was significantly higher among Major Depression patients, those showing a higher level of psychopathology and those with a current conviction. Almost half of the PRs (47.4%) had been given two or more prior convictions and more than half (53.5%) were involved in crimes against people. The probability of multiple convictions was significantly higher among inmates with Anti-Social Personality Disorder and in those with more total needs. With regard to gender, the main significant difference among the PRs was that men were found to have a higher frequency of substance use and a greater number of unsatisfied caring needs than women. Comparison between the PRs prior to detention and PCs revealed that the former held lower educational qualifications and received less psychiatric medication, but had higher levels of employment and showed greater consumption of illicit substances. In addition Anti-Social Personality Disorder (OR=26.4; IC 95%: 10.7-64.9), Post-Stress Traumatic Disturbance (OR=15.0; IC 95%: 3.5-65.4), Substance Dependency/Abuse (OR=8.5; IC 95%: 4.2-17.6), Major Depression (OR=2.6; IC 95%: 1.5-4.4), and High Suicide Risk (OR=2.6; IC 95%: 1.4-5.0) were significantly more frequent amongst PRs than PCs. The results for needs assessment revealed that the PRs showed higher levels of unmet needs and a greater need for professional help in comparison with the PCs. Although various unmet needs may result from the inmate’s condition, other needs - in particular those regarding physical health, personal security and toxic substance use - suggest that the care given to PRs may be inadequate in comparison with that given to PCs. This implies that the principle of equivalent health care for PRs with mental illnesses may not be upheld. Furthermore, the mental morbidity results of the PRs indicated that they suffer predominantly from non-psychotic and high suicide/self inflicted aggression risk associated with depression, caring needs and a prison sentence. They also often showed characteristics that are consistently associated with criminal recidivism (Anti-social Personality, use of toxic substances, prior convictions). This result justifies that there should be special follow-up for this group in the pre- and after release period. The use of CANFOR proved to be simple and the application delay was acceptable. No difficulties were encountered in the understanding of its categories by its users. As a result, itcould contribute towards better planning, supply and assessment of results at an individual level. Given that the PRs and PCs revealed different clinical and needs characteristics, it is recommended that inmates with mental disturbances should be assisted in mental health services that are adequately prepared to address their specificities.

Design and development of a microfluidic platform for use with colorimetric gold nanoprobe assays

Due to the importance and wide applications of the DNA analysis, there is a need to make genetic analysis more available and more affordable. As such, the aim of this PhD thesis is to optimize a colorimetric DNA biosensor based on gold nanoprobes developed in CEMOP by reducing its price and the needed volume of solution without compromising the device sensitivity and reliability, towards the point of care use. Firstly, the price of the biosensor was decreased by replacing the silicon photodetector by a low cost, solution processed TiO2 photodetector. To further reduce the photodetector price, a novel fabrication method was developed: a cost-effective inkjet printing technology that enabled to increase TiO2 surface area. Secondly, the DNA biosensor was optimized by means of microfluidics that offer advantages of miniaturization, much lower sample/reagents consumption, enhanced system performance and functionality by integrating different components. In the developed microfluidic platform, the optical path length was extended by detecting along the channel and the light was transmitted by optical fibres enabling to guide the light very close to the analysed solution. Microfluidic chip of high aspect ratio (~13), smooth and nearly vertical sidewalls was fabricated in PDMS using a SU-8 mould for patterning. The platform coupled to the gold nanoprobe assay enabled detection of Mycobacterium tuberculosis using 3 8l on DNA solution, i.e. 20 times less than in the previous state-of-the-art. Subsequently, the bio-microfluidic platform was optimized in terms of cost, electrical signal processing and sensitivity to colour variation, yielding 160% improvement of colorimetric AuNPs analysis. Planar microlenses were incorporated to converge light into the sample and then to the output fibre core increasing 6 times the signal-to-losses ratio. The optimized platform enabled detection of single nucleotide polymorphism related with obesity risk (FTO) using target DNA concentration below the limit of detection of the conventionally used microplate reader (i.e. 15 ng/μl) with 10 times lower solution volume (3 μl). The combination of the unique optical properties of gold nanoprobes with microfluidic platform resulted in sensitive and accurate sensor for single nucleotide polymorphism detection operating using small volumes of solutions and without the need for substrate functionalization or sophisticated instrumentation. Simultaneously, to enable on chip reagents mixing, a PDMS micromixer was developed and optimized for the highest efficiency, low pressure drop and short mixing length. The optimized device shows 80% of mixing efficiency at Re = 0.1 in 2.5 mm long mixer with the pressure drop of 6 Pa, satisfying requirements for the application in the microfluidic platform for DNA analysis.

Dynamic stiffness of the piled foundation of a onshore wind turbine

One of today's biggest concerns is the increase of energetic needs, especially in the developed countries. Among various clean energies, wind energy is one of the technologies that assume greater importance on the sustainable development of humanity. Despite wind turbines had been developed and studied over the years, there are phenomena that haven't been yet fully understood. This work studies the soil-structure interaction that occurs on a wind turbine's foundation composed by a group of piles that is under dynamic loads caused by wind. This problem assumes special importance when the foundation is implemented on locations where safety criteria are very demanding, like the case of a foundation mounted on a dike. To the phenomenon of interaction between two piles and the soil between them it's given the name of pile-soil-pile interaction. It is known that such behavior is frequency dependent, and therefore, on this work evaluation of relevant frequencies for the intended analysis is held. During the development of this thesis, two methods were selected in order to assess pile-soil-pile interaction, being one of analytical nature and the other of numerical origin. The analytical solution was recently developed and its called Generalized pile-soil-pile theory, while for the numerical method the commercial nite element software PLAXIS 3D was used. A study of applicability of the numerical method is also done comparing the given solution by the nite element methods with a rigorous solution widely accepted by the majority of the authors.

Almirante: Evaluating the board game: Board game, startup, discounted cash flow, venture capital method, real options

This thesis evaluates a start-up company (Jogos Almirante Lda) whose single asset is a board game named Almirante. It aims to conclude whether it makes sense to create a company or just earn copyrights. The thesis analyzes the board game’s market, as part of the general toy’s market, from which some data exists: European countries as well as the USA. In this work it is analyzed the several ways to finance a start-up company and then present an overview of the valuation of the Jogos Almirante based on three different methods: Discounted Cash Flow, Venture Capital Method and Real Options.

Aptamers binding to Bradykinin

Bradykinin is a peptide of the kinin group, involved in a number of receptor-mediated physiological actions, including inflammation and vasodilation, as well as neuromodulation, neuroprotection and promotion of neurogenesis. Bradykinin is the main ligand of the B2 receptor- the main kinin receptor- which is involved in the cardiac and renal protective effects of kinins in diseases. Antibodies have been considered for a long time as promising therapeutic agents in various fields, especially cancer-related ones. Aptamers, on the other hand, have proven to be an excellent alterative, since they have similar properties to those of monoclonal antibodies, such a high-specificity of recognition and high-affinity binding. Plus, they are developed using in vitro selection procedures and can be reproduced by enzymatic reactions. SELEX is a powerful tool for the development of both DNA and RNA aptamers. The main goal of this project was to design a method to select aptamers against bradykinin using capillary electrophoresis alongside the SELEX technique. The selection was done by comparing the aptamers’ (ssDNA-target complex) electrophoretic mobility with that of the ssDNA and the target, which allowed us to define an appropriate collection window that took into consideration the analytes’ detection time, thus enabling the collection of the desired oligonucleotides. After two selection rounds, the collected pool was sequenced, the affinity was measured and the aptamers’ secondary structure was predicted. We concluded that with only two selection cycles, the original DNA library’s bulk affinity grew around 0.4%. The structural characterization of the aptamers, performed with the aid of the Mfold software, revealed that there are many repetitive motifs amongst them, indicating that the selection process was successful. We have obtained 16 sequences of candidate aptamers as bradykinin ligands of similar sequences and secondary structures whose biological activity should be analyzed after synthesis; mainly in regard to their role as bradykinin inhibitors.

Detection of purkinje images for automatic positioning of fixation target and interferometric measurements of anterior eye chamber

In cataract surgery, the eye’s natural lens is removed because it has gone opaque and doesn’t allow clear vision any longer. To maintain the eye’s optical power, a new artificial lens must be inserted. Called Intraocular Lens (IOL), it needs to be modelled in order to have the correct refractive power to substitute the natural lens. Calculating the refractive power of this substitution lens requires precise anterior eye chamber measurements. An interferometry equipment, the AC Master from Zeiss Meditec, AG, was in use for half a year to perform these measurements. A Low Coherence Interferometry (LCI) measurement beam is aligned with the eye’s optical axis, for precise measurements of anterior eye chamber distances. The eye follows a fixation target in order to make the visual axis align with the optical axis. Performance problems occurred, however, at this step. Therefore, there was a necessity to develop a new procedure that ensures better alignment between the eye’s visual and optical axes, allowing a more user friendly and versatile procedure, and eventually automatizing the whole process. With this instrument, the alignment between the eye’s optical and visual axes is detected when Purkinje reflections I and III are overlapped, as the eye follows a fixation target. In this project, image analysis is used to detect these Purkinje reflections’ positions, eventually automatically detecting when they overlap. Automatic detection of the third Purkinje reflection of an eye following a fixation target is possible with some restrictions. Each pair of detected third Purkinje reflections is used in automatically calculating an acceptable starting position for the fixation target, required for precise measurements of anterior eye chamber distances.

Molecular targeting of proteins by homocysteine: implications in familial and clinical hypercholesterolemia

Cardiovascular diseases (CVDs) are one of the leading causes of death and disability worldwide and one of its underlying causes is hypercholesterolemia. Hypercholesterolemia can have genetic (familial hypercholesterolemia, FH) and non-genetic causes (clinical hypercholesterolemia, CH), the first much more severe, with occurrence of premature atherosclerosis. While the pathophysiological role of homocysteine (Hcy) on CVD is still controversial, molecular targeting of protein by S and N-homocysteinylation offers a new paradigm to be considered in the vascular pathogenesis of hypercholesterolemia. On this regard, the present study aims to give new insights on protein targeting by Hcy in both CH and FH conditions. A total of 187 subjects were included: 65 normolipidemic and 122 hypercholesterolemic. Total (tHcy) and free (fHcy) fractions were quantified in serum samples after validation of an HPLCFD method, to assess S-homocysteinylation. Also, the lactonase (LACase) activity of paraoxonase-1 (PON1) was quantified by a colorimetric assay, as a surrogate of N-homocysteinylation. tHcy does not differ among groups. Nevertheless, fHcy declines in the hypercholesterolemic groups, with more evidence to the FH population. Consequently, there seems to be an increase of Shomocysteinylation, regardless of lipid lowering therapy (LLT). Also, despite of LLT use, LACase activity is lower in FH, thus the risk for protein N-homocysteinylation seems to be higher. Moreover, the decrease in LACase/ApoA1 and LACase/HDL ratios in FH, shows that HDL is dysfunctional in this population, despite its normal concentration values. Data supports that the pathophysiological role of Hcy on hypercholesterolemia may reside in its ability to post-translationally modify proteins. This role is particularly evident in FH condition. In the future, it will be interesting to identify which target proteins are modified and thus involved in vascular pathology progression.

Gold nanoprobes for assessing expression of critical genes in the infection pathway of MRSA

Staphylococcus aureus is an important opportunistic pathogen that can cause a wide variety of diseases from mild to life-threatening conditions. S. aureus can colonize many parts of the human body but the anterior nares are the primary ecological niche. Its clinical importance is due to its ability to resist almost all classes of antibiotics available together with its large number of virulence factores. MRSA (Methicillin-Resistant S. aureus) strains are particularly important in the hospital settings, being the major cause of nosocomial infections worldwide. MRSA resistance to β-lactam antibiotics involves the acquisition of the exogenous mecA gene, part of the SCCmec cassette. Fast and reliable diagnostic techniques are needed to reduce the mortality and morbidity associated with MRSA infections, through the early identification of MRSA strains. The current identification techniques are time-consuming as they usually involves culturing steps, taking up to five days to determine the antibiotic resistance profile. Several amplification-based techniques have been developed to accelerate the diagnosis. The aim of this project was to develop an even faster methodology that bypasses the DNA amplification step. Gold-nanoprobes were developed and used to detect the presence of mecA gene in S. aureus genome, associated with resistance traits, for colorimetric assays based on non-crosslinking method. Our results showed that the mecA and mecA_V2 gold-nanoprobes were sensitive enough to discriminate the presence of mecA gene in PCR products and genomic DNA (gDNA) samples for target concentrations of 10 ng/μL and 20 ng/μL, respectively. As our main objective was to avoid the amplification step, we concluded that the best strategy for the early identification of MRSA infection relies on colorimetric assays based on non-crosslinking method with gDNA samples that can be extracted directly from blood samples.

Al-doped ZnO ceramic sputtering targets based on nanocrystalline powders produced by emulsion detonation synthesis – deposition and application as a transparent conductive oxide material

Transparent conducting oxides (TCOs) have been largely used in the optoelectronic industry due to their singular combination of low electrical resistivity and high optical transmittance. They are usually deposited by magnetron sputtering systems being applied in several devices, specifically thin film solar cells (TFSCs). Sputtering targets are crucial components of the sputtering process, with many of the sputtered films properties dependent on the targets characteristics. The present thesis focuses on the development of high quality conductive Al-doped ZnO (AZO) ceramic sputtering targets based on nanostructured powders produced by emulsion detonation synthesis method (EDSM), and their application as a TCO. In this sense, the influence of several processing parameters was investigated from the targets raw-materials synthesis to the application of sputtered films in optoelectronic devices. The optimized manufactured AZO targets present a final density above 99 % with controlled grain size, an homogeneous microstructure with a well dispersed ZnAl2O4 spinel phase, and electrical resistivities of ~4 × 10-4 Ωcm independently on the Al-doping level among 0.5 and 2.0 wt. % Al2O3. Sintering conditions proved to have a great influence on the properties of the targets and their performance as a sputtering target. It was demonstrated that both deposition process and final properties of the films are related with the targets characteristics, which in turn depends on the initial powder properties. In parallel, the influence of several deposition parameters in the film´s properties sputtered from these targets was investigated. The sputtered AZO TCOs showed electrical properties at room temperature that are superior to simple oxides and comparable to a reference TCO – indium tin oxide (ITO), namely low electrical resistivity of 5.45 × 10-4 Ωcm, high carrier mobility (29.4 cm2V-1s-1), and high charge carrier concentration (3.97 × 1020 cm-3), and also average transmittance in the visible region > 80 %. These superior properties allowed their successful application in different optoelectronic devices.

Sol-gel entrapped biosystems: enzyme(s) and whole cells

In this work two different procedures to utilize the sol-gel technology were applied to immobilize/encapsulate enzymes and living cells. CO2 has reached levels in the atmosphere that make it a pollutant. New methods to utilize this gas to obtain products of added value can be very important, both from an environmentally point of view and from an economic standpoint. The first goal of this work was to study the first reaction of a sequential, three-step, enzymatic process that carries out the conversion of CO2 to methanol. Of the three oxidoreductases involved, our focus was on formate dehydrogenase (FateDH) that converts CO2 to formate. This reaction requires the presence of the cofactor β-nicotinamide adenine dinucleotide in reduced form (NADH). The cofactor is expensive and unstable. Our experiments were directed towards generating NADH from its oxidized form (NAD+), using glutamate dehydrogenase (GDH). The formation of NADH from NAD+ in aqueous medium was studied with both free and sol-gel entrapped GDH. This reaction was then followed by the conversion of CO2 to formate, catalysed by free or sol-gel entrapped FateDH. The quantification of NADH/NAD+ was made using UV/Vis spectroscopy. Our results showed that it was possible to couple the GDH-catalyzed generation of the cofactor NADH with the FateDH-catalyzed conversion of CO2, as confirmed by the detection of formate in the medium, using High Performance Liquid Chromatography (HPLC). The immobilization of living cells can be advantageous from the standpoint of ease of recovery, reutilization and physical separation from the medium. Also dead cells may not always exhibit enzymatic activities found with living cells. In this work cell encapsulation was performed using Escherichia coli bacteria. To reduce toxicity for living organisms, the sol-gel method was different than for enzymes, and involved the use of aqueous-based precursors. Initial encapsulation experiments and viability tests were carried out with E. coli K12. Our results showed that sol-gel entrapment of the cells was achieved, and that cell viability could be increased with additives, namely betaine that led to greater viability improvement and was selected for further studies. For an approach to “in-cell” Nuclear Magnetic Resonance (NMR) experiments, the expression of the protein ctCBM11 was performed in E. coli BL21. It was possible to obtain an NMR signal from the entrapped cells, a considerable proportion of which remained alive after the NMR experiments. However, it was not possible to obtain a distinctive NMR signal from the target protein to distinguish it from the other proteins in the cell.

Modeling and optimization of extracellular polysaccharides production by Enterobacter A47

Polysaccharides are gaining increasing attention as potential environmental friendly and sustainable building blocks in many fields of the (bio)chemical industry. The microbial production of polysaccharides is envisioned as a promising path, since higher biomass growth rates are possible and therefore higher productivities may be achieved compared to vegetable or animal polysaccharides sources. This Ph.D. thesis focuses on the modeling and optimization of a particular microbial polysaccharide, namely the production of extracellular polysaccharides (EPS) by the bacterial strain Enterobacter A47. Enterobacter A47 was found to be a metabolically versatile organism in terms of its adaptability to complex media, notably capable of achieving high growth rates in media containing glycerol byproduct from the biodiesel industry. However, the industrial implementation of this production process is still hampered due to a largely unoptimized process. Kinetic rates from the bioreactor operation are heavily dependent on operational parameters such as temperature, pH, stirring and aeration rate. The increase of culture broth viscosity is a common feature of this culture and has a major impact on the overall performance. This fact complicates the mathematical modeling of the process, limiting the possibility to understand, control and optimize productivity. In order to tackle this difficulty, data-driven mathematical methodologies such as Artificial Neural Networks can be employed to incorporate additional process data to complement the known mathematical description of the fermentation kinetics. In this Ph.D. thesis, we have adopted such an hybrid modeling framework that enabled the incorporation of temperature, pH and viscosity effects on the fermentation kinetics in order to improve the dynamical modeling and optimization of the process. A model-based optimization method was implemented that enabled to design bioreactor optimal control strategies in the sense of EPS productivity maximization. It is also critical to understand EPS synthesis at the level of the bacterial metabolism, since the production of EPS is a tightly regulated process. Methods of pathway analysis provide a means to unravel the fundamental pathways and their controls in bioprocesses. In the present Ph.D. thesis, a novel methodology called Principal Elementary Mode Analysis (PEMA) was developed and implemented that enabled to identify which cellular fluxes are activated under different conditions of temperature and pH. It is shown that differences in these two parameters affect the chemical composition of EPS, hence they are critical for the regulation of the product synthesis. In future studies, the knowledge provided by PEMA could foster the development of metabolically meaningful control strategies that target the EPS sugar content and oder product quality parameters.

Lag-user method: Using laggards to leverage user innovation

Laggards are the last users to adopt a product. Prior literature on user-led innovation ignores laggards’ impact on innovation. In this paper, we develop the Lag-User Method, through which laggards can generate new ideas. Through six studies with 62 teams in three countries, we apply the method to different technologies and services and present our findings to executives to get managerial insights. Findings reveal that laggards who generate new ideas (lag-users) have different perceptions of user-friendly products and different unfulfilled needs. They prefer simple products. We propose that by involving lag-users in NPD, firms can improve the effectiveness of NPD.

Therapeutics bioconjugates: evaluation of iminoboronates as payload delivery system for cancer

The advent of bioconjugation impacted deeply the world of sciences and technology. New biomolecules were found, biological processes were understood, and novel methodologies were formed due to the fast expansion of this area. The possibility of creating new effective therapies for diseases like cancer is one of big applications of this now big area of study. Off target toxicity was always the problem of potent small molecules with high activity towards specific tumour targets. However, chemotherapy is now selective due to powerful linkers that connect targeting molecules with affinity to interesting biological receptors and cytotoxic drugs. This linkers must have very specific properties, such as high stability in plasma, no toxicity, no interference with ligand affinity nor drug potency, and at the same time, be able to lyse once inside the target molecule to release the therapeutic warhead. Bipolar environments between tumour intracellular and extracellular medias are usually exploited by this linkers in order to complete this goal. The work done in this thesis explores a new model for that same task, specific cancer drug delivery. Iminoboronates were studied due to its remarkable selective stability towards a wide pH range and endogenous molecules. A fluorescence probe was design to validate this model by creating an Off/On system and determine the payload release location in situ. A process was optimized to synthetize the probe 8-(1-aminoethyl)-7-hydroxy-coumarin (1) through a reductive amination reaction in a microwave reactor with 61 % yield. A method to conjugate this probe to ABBA was also optimized, obtaining the iminoboronate in good yields in mild conditions. The iminoboronate model was studied regarding its stability in several simulated biological environments and each half-life time was determined, showing the conjugate is stable most of the cases except in tumour intracellular systems. The construction of folate-ABBA-coumarin bioconjugate have been made to complete this evaluation. The ability to be uptaken by a cancer cell through endocytosis process and the conjugation delivery of coumarin fluorescence payload are two features to hope for in this construct.

Recommendations for Nova School of Business and Economics to target yhe Colombian market

The growing connotation Internationalization has worldwide, alongside the economic, political and socio-environmental changes, is empowering a progressively global education economy. Therefore, this Work Project aims to help Nova SBE to understand the decision making process of the Colombian tertiary education students, as this market constitutes an enriching opportunity to meet both business and educative objectives. In order to do so, a qualitative research was conducted to comprehend the rationale behind Colombian students to study abroad. The study points out that the reputation of a HE institution and the Portuguese culture are the key attributes to pursue a degree in Portugal.