Adjusting to external imbalances within the EMU, the case of Portugal

From 1995 to 2010 Portugal has accumulated a negative international asset position of 110 percent of GDP. In a developed and aging economy the number is astonishing and any argument to consider it sustainable must rely on extremely favorable forecasts on growth. Portuguese policy options are reduced in number: no autonomous monetary policy, no currency to devaluate, and limited discretion in changing fiscal deficits and government debt. To start the necessary deleveraging a remaining possible policy is a budget-neutral change of the tax structure that increases private saving and net exports. An increase in the VAT and a decrease in the employer’s social security contribution tax can achieve the desired outcome in the short run if they are complemented with wage moderation. To obtain a substantial improvement in competitiveness and a large decrease in consumption, the changes in the tax rates have to be large. While a precise quantitative assessment is difficult, the initial increase in the effective VAT rate needed to allow the social security tax to decrease by 16 percentage points (pp) is approximately 10 pp. Such a large increase in the effective VAT rate could be obtained by raising most of the reduced VAT rates to the new general VAT rate of 23 percent. The empirical analysis shows that over time the suggested tax swap could generate surpluses and improve the trade balance. A temporary version of the suggested tax-swap has the attractiveness to achieve a sharper increase in the private saving rate maintaining the short run gains in competitiveness. Finally, the temporary version of the fiscal devaluation could be the basis for an automatic stabilizer to external imbalances within a monetary union.Portugal has been running large current account deficits every year since 1995. These deficits have accumulated to an astonishing 110 percent of GDP negative external asset position. The sustainability of such a large external position is questionable and must rely on fantastic productivity growth expectations. The recent global financial crisis appears to have anticipated the international investors reality check on those future expectations with the result of a large increase in the cost of external financing. Today the rebalancing of the current account through an increase in national savings and an improvement in competitiveness must be at the top of the Portuguese authorities “to do” list as the cost of a pull out from international investors is of the order of 10% of GDP. The external rebalancing is difficult as the degrees of freedom of the Portuguese authorities are limited in number: they have no autonomous monetary policy, no currency to devaluate, and little discretion in fiscal policy as deficit limits and debt targets are set by the Stability Growth Pact and the postcrisis consensus on medium-term fiscal consolidation. One possibility that remains is to change the fiscal policy mix for a given budget deficit. The purpose of this paper is to explore the effects of a “fiscal devaluation”1 obtained through a tax swap between employers’ social security contributions and taxes on consumption2. The paper begins by illustrating Portugal’s current account evolution during the euro period. The second section section lays out a model to offer a qualitative assessment of the dynamic outcomes of the the tax swap. I show that the suggested tax swap can in theory achieve the desired outcomes in terms of competitiveness and consumption if complemented with moderation (stickiness) in wages. I also study the effects of a temporary version of the tax swap and show that it achieves a sharper improvement in the current account that accelerate the rebalancing. The third section moves to the empirical analysis and estimates the likely effects of the tax swap for the Portuguese economy. The fourth section concludes.

Individual and aggregate money demands

I construct a model in which money and bond holdings are consistent with individual decisions and aggregate variables such as production and interest rates. The agents are infinitely-lived, have constant-elasticity preferences, and receive a fraction of their income in money. Each agent solves a Baumol-Tobin money management problem. Markets are segmented because financial frictions make agents trade bonds for money at different times. Trading frequency, consumption, government decisions and prices are mutually consistent. An increase in inflation, for example, implies higher trading frequency, more bonds sold to account for seigniorage, and lower real balances.

Transparency in project bond ratings: Assessment of rating methodologies and development of a proven rating simulator

A Work Project, presented as part of the requirements for the Award of a Masters Degree in Finance from the NOVA – School of Business and Economics

Oi merger with Portugal Telecom: A strategic partnership

A Work Project, presented as part of the requirements for the Award of a Masters Degree in Finance from the NOVA – School of Business and Economics

Improving contact center cost efficiency and customer experience in a retail company

A Work Project, presented as part of the requirements for the Award of a Masters Degree in Management from the NOVA – School of Business and Economics

Machine learning Gaussian short rate

Dissertação para obtenção do Grau de Doutor em Estatística e Gestão do Risco

Rebalancing frequency and the welfare cost of inflation

Cash-in-advance models usually require agents to reallocate money and bonds in fixed periods, every month or quarter, for example. I show that fixed periods underestimate the welfare cost of inflation. I use a model in which agents choose how often they exchange bonds for money. In the benchmark specification, the welfare cost of ten percent instead of zero inflation increases from 0.1 percent of income with fixed periods to one percent with optimal periods. The results are robust to different preferences, to different compositions of income in bonds or money, and to the introduction of capital and labor.

Potential for ORC application in the Portuguese manufacturing industry

Dissertação para obtenção do Grau de Mestre em Engenharia do Ambiente, perfil Gestão e Sistemas Ambientais

Context-based identification of energy consumption in industrial plants

Nowadays, reducing energy consumption is one of the highest priorities and biggest challenges faced worldwide and in particular in the industrial sector. Given the increasing trend of consumption and the current economical crisis, identifying cost reductions on the most energy-intensive sectors has become one of the main concerns among companies and researchers. Particularly in industrial environments, energy consumption is affected by several factors, namely production factors(e.g. equipments), human (e.g. operators experience), environmental (e.g. temperature), among others, which influence the way of how energy is used across the plant. Therefore, several approaches for identifying consumption causes have been suggested and discussed. However, the existing methods only provide guidelines for energy consumption and have shown difficulties in explaining certain energy consumption patterns due to the lack of structure to incorporate context influence, hence are not able to track down the causes of consumption to a process level, where optimization measures can actually take place. This dissertation proposes a new approach to tackle this issue, by on-line estimation of context-based energy consumption models, which are able to map operating context to consumption patterns. Context identification is performed by regression tree algorithms. Energy consumption estimation is achieved by means of a multi-model architecture using multiple RLS algorithms, locally estimated for each operating context. Lastly, the proposed approach is applied to a real cement plant grinding circuit. Experimental results prove the viability of the overall system, regarding both automatic context identification and energy consumption estimation.

A DSL for querying building data streams of energy, eeather and occupation data

The superfluous consumption of energy is faced by the modern society as a Socio-Economical and Environmental problem of the present days. This situation is worsening given that it is becoming clear that the tendency is to increase energy price every year. It is also noticeable that people, not necessarily proficient in technology, are not able to know where savings can be achieved, due to the absence of accessible awareness mechanisms. One of the home user concerns is to balance the need of reducing energy consumption, while producing the same activity with all the comfort and work efficiency. The common techniques to reduce the consumption are to use a less wasteful equipment, altering the equipment program to a more economical one or disconnecting appliances that are not necessary at the moment. However, there is no direct feedback from this performed actions, which leads to the situation where the user is not aware of the influence that these techniques have in the electrical bill. With the intension to give some control over the home consumption, Energy Management Systems (EMS) were developed. These systems allow the access to the consumption information and help understanding the energy waste. However, some studies have proven that these systems have a clear mismatch between the information that is presented and the one the user finds useful for his daily life, leading to demotivation of use. In order to create a solution more oriented towards the user’s demands, a specially tailored language (DSL) was implemented. This solution allows the user to acquire the information he considers useful, through the construction of questions about his energy consumption. The development of this language, following the Model Driven Development (MDD) approach, took into consideration the ideas of facility managers and home users in the phases of design and validation. These opinions were gathered through meetings with experts and a survey, which was conducted to the purpose of collecting statistics about what home users want to know.

Characterization of molecular damage induced by UV photons and carbon ions on biomimetic heterostructures

The study of the effect of radiation on living tissues is a rather complex task to address mainly because they are made of a set of complex functional biological structures and interfaces. Particularly if one is looking for where damage is taking place in a first stage and what are the underlying reaction mechanisms. In this work a new approach is addressed to study the effect of radiation by making use of well identified molecular hetero-structures samples which mimic the biological environment. These were obtained by assembling onto a solid support deoxyribonucleic acid (DNA) and phospholipids together with a soft water-containing polyelectrolyte precursor in layered structures and by producing lipid layers at liquid/air interface with DNA as subphase. The effects of both ultraviolet (UV) radiation and carbon ions beams were systematically investigated in these heterostructures, namely damage on DNA by means vacuum ultraviolet (VUV), infrared (IR), X-Ray Photoelectron (XPS) and impedance spectroscopy. Experimental results revealed that UV affects furanose, PO2-, thymines, cytosines and adenines groups. The XPS spectrometry carried out on the samples allowed validate the VUV and IR results and to conclude that ionized phosphate groups, surrounded by the sodium counterions, congregate hydration water molecules which play a role of UV protection. The ac electrical conductivity measurements revealed that the DNA electrical conduction is arising from DNA chain electron hopping between base-pairs and phosphate groups, with the hopping distance equal to the distance between DNA base-pairs and is strongly dependent on UV radiation exposure, due loss of phosphate groups. Characterization of DNA samples exposed to a 4 keV C3+ ions beam revealed also carbon-oxygen bonds break, phosphate groups damage and formation of new species. Results from radiation induced damage carried out on biomimetic heterostructures having different compositions revealed that damage is dependent on sample composition, with respect to functional targeted groups and extent of damage. Conversely, LbL films of 1,2-dipalmitoyl-sn-Glycero-3-[Phospho-rac-(1-glycerol)] (Sodium Salt) (DPPG) liposomes, alternated with poly(allylamine hydrochloride) (PAH) revealed to be unaffected, even by prolonged UV irradiation exposure, in the absence of water molecules. However, DPPG molecules were damaged by the UV radiation in presence of water with cleavage of C-O, C=O and –PO2- bonds. Finally, the study of DNA interaction with the ionic lipids at liquid/air interfaces revealed that electrical charge of the lipid influences the interaction of phospholipid with DNA. In the presence of DNA in the subphase, the effects from UV irrladiation were seen to be smaller, which means that ionic products from biomolecules degradation stabilize the intact DPPG molecules. This mechanism may explain why UV irradiation does not cause immediate cell collapse, thus providing time for the cellular machinery to repair elements damaged by UV.

Definição de um modelo de incentivo de profissionais de saúde em contexto de integração vertical e financiamento capitativo de cuidados de saúde

RESUMO - Contexto Os indivíduos, tal como as instituições, não são imunes a incentivos. No entanto, enquanto os modelos de incentivos das instituições têm sido alvo de diferentes evoluções, o mesmo não se verificou ao nível dos profissionais. Esta situação não se figura compatível com a complexidade de gestão de recursos humanos, devendo ser obviada para potenciar o alinhamento entre os interesses institucionais e os dos próprios profissionais. Objectivos Estudar a atribuição de incentivos a profissionais de saúde no contexto de organizações com integração vertical de cuidados. Metodologia A metodologia adoptada compreendeu três fases. Numa primeira procedeu-se à revisão sistemática de literatura relativa à: (1) construção de modelos de incentivo a profissionais em diferentes sistemas de saúde e tipo de prestadores; e (2) identificação de medidas de custo-efectividade comprovada. Tendo por base esta evidência, a par de documentação oficial ao nível do modelo de financiamento das ULS, procedeu-se, numa segunda fase, à construção de um modelo de incentivo base com recurso à ferramenta Microsoft Excel. Por último, numa terceira etapa, procedeu-se à adaptação do modelo base construído na etapa transacta tendo por base informação obtida mediante a realização de um estudo retrospectivo in loco na ULS do Baixo Alentejo (ULSBA). Em adição, procedeu-se à estimativa do impacto na perspectiva da ULS e dos profissionais para o cenário base e diversas análises de sensibilidade. Resultados No que respeita à estrutura, o modelo base de incentivos a profissionais apresenta 44 indicadores, distribuídos por cinco dimensões de análise, sendo que 28 indicadores (63,6%) são de processo e 14 (31,8%) de resultado. Relativamente às dimensões em análise, verifica-se uma predominância de indicadores ao nível da dimensão eficiência e qualidade assistencial, totalizando 35 (i.e. 79,5% dos 44 indicadores). No que respeita ao destinatário, 14 indicadores (31,8%) apresentam uma visão holística da ULS, 17 (38,6%) encontram-se adstritos unicamente aos cuidados primários e os remanescentes 13 (29,5%) aos cuidados hospitalares. Cerca de 85% dos actuais incentivos da ULSBA decorre da unidade de pagamento salarial secundada pelo pagamento de suplementos (12%). Não obstante, o estudo retrospectivo da ULSBA confirmou o cenário expectável de ausência de um modelo de incentivo homogéneos e transversal à ULS, transparecendo importantes assimetrias entre diferentes unidades prestadoras e/ou profissionais de saúde. De forma relevante importa apontar a insuficiência de incentivos capitacionais (ao contrário do que sucede com o modelo de incentivo da própria ULSBA) ou adstritos a índices de desempenho. Tendo em consideração o modelo de incentivo concebido e adaptado à realidade da ULSBA, a par do plano de implementação, estima-se que o modelo de incentivos gere: (1) poupanças na perspectiva da ULS (entre 2,5% a 3,5% do orçamento global da ULSBA); e (2) um incremento de remuneração ao nível dos profissionais (entre 5% a 15% do salario base). O supracitado – aparentemente contraditório - decorre da aposta em medidas de custo-efectividade contrastada e um alinhamento entre o modelo proposto e o vigente para o próprio financiamento da unidade, apostando numa clara estratégia de ganhos mútuos. As análises de sensibilidade realizadas permitem conferir a solidez e robustez do modelo a significativas variações em parâmetros chave.

Rebalancing frequency and the welfare cost of inflation

Cash-in-advance models usually require agents to reallocate money and bonds in fixed periods. Every month or quarter, for example. I show that fixed periods underestimate the welfare cost of inflation. I use a model in which agents choose how often they exchange bonds for money. In the benchmark specification, the welfare cost of 10 percent instead of 0 inflation increases from 0.1 percent of income with fixed periods to 1 percent with optimal periods. The results are robust to different references, to different compositions of income in bonds or money, and to the introduction of capital and labor.

Beyond the carry trade: Optimal currency portfolios

Author's Pre-print

How to improve Sonae's processes of suppliers of services' management?

Sonae is one of the greatest retailers in Portugal. As the business got bigger, it centralized operations. Direcção de Serviços Administrativos processes all invoices sent by suppliers. However, there are many which deliver errors and are not processed automatically. As a result, there are lost invoices and suppliers who are not paid, while the company’s accountability becomes less transparent. Such is due to a lack of proactive attitude towards suppliers as well as to a lack of incentives for employees to perform well. Great savings may be achieved with little effort, if the right things are measured so that the right tools may be applied.