Electrodialytic remediation of two types of air pollution control residues and their applicability in construction materials

Dissertação para obtenção do Grau de Mestre em Engenharia do Ambiente Perfil de Engenharia de Sistemas Ambientais

Internationalization strategies and methods of construction firms – a comparative study between Hong Kong - Chinese and Portuguese – European approaches

Dissertação para obtenção do Grau Mestre em Engenharia Civil – Perfil de Construção

Follow the red road of triheme cytochromes in Geobacter sulfurreducens

The bacterium Geobacter sulfurreducens (Gs) is capable of oxidizing a large variety of compounds relaying electrons out of the cytoplasm and across the membrane in a process designated as extracellular electron transfer. The Gs genome was fully sequenced and a family composed by five periplasmic triheme cytochromes c7 (designated PpcA-E) was identified. These cytochromes play an important role in the reduction of extracellular acceptors. They contain approximately 70 amino acids, three heme groups with bis-histidinyl axial coordination, and share between 57 and 77% sequence identity. The triheme cytochrome PpcA is highly abundant in Gs and is most likely the reservoir of electrons destined for outer surface. In addition to its role in electron transfer pathways this protein can perform e-/H+ energy transduction, a process that is disrupted when the strictly conserved aromatic residue phenylalanine 15 is replaced by a leucine (PpcAF15L). This Thesis focuses on the expression, purification and characterization of these proteins using Nuclear Magnetic Resonance and ultraviolet-visible spectroscopy. The orientations of the heme axial histidine ring planes and the orientation of the heme magnetic axis were determined for each Gs triheme cytochrome. The comparison of the orientations obtained in solution with the crystal structures available showed significant differences. The results obtained provide the paramagnetic constraints to include in the future refinement of the solution structure in the oxidized state. In this work was also determined the solution structure and the pH-dependent conformational changes of the PpcAF15L allowing infer the structural origin for e-/H+ energy transduction mechanism as shown by PpcA. Finally, the backbone and side chain NH signals of PpcA were used to map interactions between this protein and the putative redox partner 9,10-anthraquinone-2,6-disulfonate (AQDS). In this work a molecular interaction was identified for the first time between PpcA and AQDS, constituting the first step toward the rationalization of the Gs respiratory chain.

Hygrothermal behaviour of earthen plasters for sustainable housing construction

A ready-mixed and several laboratory formulated mortars were produced and tested in fresh state and after hardening, simulating a masonry plaster for indoor application. All the mortars used a clayish earth from the same region and different compositions of aggregates, eventually including fibres and a phase change material. All the formulated mortars were composed by 1:3 volumetric proportions of earth and aggregate. Tests were developed for consistency, fresh bulk density, thermal conductivity, capillary absorption and drying, water vapour permeability and sorption-desorption. The use of PCM changed drastically the workability of the mortars and increased their capillary absorption. The use of fibres and variations on particle size distribution of the mixtures of sand that were used had no significant influence on tested properties. But particularly the good workability of these mortars and the high capacity of sorption and desorption was highlighted. With this capacity plasters made with these mortars are able to adsorb water vapour from indoor atmosphere when high levels of relative humidity exist and release water vapour when the indoor atmosphere became too dry. This fact makes them able to contribute passively for a healthier indoor environment. The technical, ecological and environmental advantages of the application of plasters with this type of mortars are emphasized, with the aim of contributing for an increased use for new or existent housing.

Construction of Lean and Green indexes to measure companies’ performance

The demand for costs and time reductions in companies’ processes, in order to increase efficiency, leads companies to seek innovative management paradigms to support their needs for growth and continuous improvement. The Lean paradigm has great relevance in companies’ need for waste reduction, particularly in manufacturing companies. On the other hand the demand of companies for waste reduction has gained a new dimension not only at the material level, but also at the environmental level with the introduction of the Green paradigm. As such, manufacturing companies have been adopting practices that reduce the impact of their activities on the environment. Although nowadays many manufacturing companies already implement waste reduction practices related to Lean and Green paradigms, many of them are unable to understand specifically if their efforts are enough for the application of these practices to be successful or even if their actual performance in implementing Lean or Green practices reflects the self-assessment that they have of themselves. Thus, besides the study of the development of Lean and Green paradigms in recent years, the present dissertation has the important objective of the construction of two indexes (the Lean Index and the Green Index) enabling the measurement of the performance of Portuguese manufacturing companies relating the implementation of Lean and Green practices. The data used to create the Lean and Green indexes where obtained from the implementation of the European Manufacturing Survey 2012 in Portugal. The survey questions related to the implementation of Lean and Green practices are used as variables in the development of the model for the two indexes. For the construction of representative expressions of Lean Index and Green Index it was applied the Factorial Analysis for assigning the variables weights and aggregation.

Application of geographic information system and modelling in health impact assessment for urban road mobility in Vietnam

Transport is an essential sector in modern societies. It connects economic sectors and industries. Next to its contribution to economic development and social interconnection, it also causes adverse impacts on the environment and results in health hazards. Transport is a major source of ground air pollution, especially in urban areas, and therefore contributing to the health problems, such as cardiovascular and respiratory diseases, cancer, and physical injuries. This thesis presents the results of a health risk assessment that quantifies the mortality and the diseases associated with particulate matter pollution resulting from urban road transport in Hai Phong City, Vietnam. The focus is on the integration of modelling and GIS approaches in the exposure analysis to increase the accuracy of the assessment and to produce timely and consistent assessment results. The modelling was done to estimate traffic conditions and concentrations of particulate matters based on geo-references data. A simplified health risk assessment was also done for Ha Noi based on monitoring data that allows a comparison of the results between the two cases. The results of the case studies show that health risk assessment based on modelling data can provide a much more detail results and allows assessing health impacts of different mobility development options at micro level. The use of modeling and GIS as a common platform for the integration of different assessments (environmental, health, socio-economic, etc.) provides various strengths, especially in capitalising on the available data stored in different units and forms and allows handling large amount of data. The use of models and GIS in a health risk assessment, from a decision making point of view, can reduce the processing/waiting time while providing a view at different scales: from micro scale (sections of a city) to a macro scale. It also helps visualising the links between air quality and health outcomes which is useful discussing different development options. However, a number of improvements can be made to further advance the integration. An improved integration programme of the data will facilitate the application of integrated models in policy-making. Data on mobility survey, environmental monitoring and measuring must be standardised and legalised. Various traffic models, together with emission and dispersion models, should be tested and more attention should be given to their uncertainty and sensitivity

Starburst accelerator and incubator construction & energy: How to monitor the activities of an incubator and give strategic advice to startups

This work project takes the format of a problem-solving approach suggested by “Impulse Partners”, a French consulting firm. It recommends a way to measure the success of ten startups in the incubators “Starburst” and “Incubator Construction & Energy” and give them strategic guidance. A Balanced Scorecard is elaborated to help incubated startups building up and implementing their strategy. The Scorecard suggests possible initiatives for the startups that are ideally realized with the help of the consulting firm that is steering the incubator. Special attention is drawn to what the startups need to succeed, which typically concerns financing, networking and managing skills.

What hides behind the fixed-term contracts wage gap?

In Portugal, about 20% of full-time workers are employed under a fixed-term contract. Using a rich longitudinal matched employer-employee dataset for Portugal, with more than 20 million observations and covering the 2002-2012 period, we confirm the common idea that fixed-term contracts are not desirable when compared to permanent ones, by estimating a conditional wage gap of -1.7 log points. Then, we evaluate the sources of that wage penalty by combining a three way high-dimensional fixed effects model with the decomposition of Gelbach (2014), in which the three dimensions considered are the worker’s unobserved ability, the firm’s compensation wage policy and the job title effect. It is shown that the average worker with a fixed-term contract is less productive than his/her permanent counterparts, explaining -3.92 log points of the FTC wage penalty. Additionally, the sorting of workers into lower-paid job titles is also responsible for -0.59 log points of the wage gap. Surprisingly, we found that the allocation of workers among firms mitigates the existing wage penalty (in 4.23 log points), as fixed-term workers are concentrated into firms with a more generous compensation policy. Finally, following Figueiredo et al. (2014), we further control for the worker-firm match characteristics and reach the conclusion that fixed-term employment relationships have an overrepresentation of low quality worker-firm matches, explaining 0.65 log points of the FTC wage penalty.

Construction sector: Need for strategic reorientation

The construction sector in Portugal declined sharply over the past 10 years. The current crisis can wiped out the entire industry. Can the industry survive? What lessons can we learn? What can be done to revive the sector? These are questions this study intends to answer. By analyzing the best practices of the industry and of the largest construction companies in Portugal, as well as the difficulties and constrains that they all faced, I found that retrenchment (operational costs and selling assets) are the main measures companies resort to, and that strategic reorientation is essential to turnaround. I found that internationalization is a key driver on strategic reorientation and diversification and concentration are complementary strategies that can enforce and strengthen the main one.

Mota-Engil Construction

Equity research report

Visual politics of the estado novo realized on the Alameda Dom Afonso Henriques in Lisbon – the construction of ideal citizenship?

The stylistic categorization of the Estado Novo has been intensely discussed by Portuguese art historians. The square Alameda Dom Afonso Henriques in Lisbon (Alameda) can be seen as paradigmatic for the architecture of power of the Estado Novo. The Alameda forms a gardened valley between two hills. There you find two prominent and highly propagandist buildings: The Instituto Superior Técnico (IST) and the Fonte Luminosa are dedicated to modern sciences and respectively to the harmonious contribution of nature to the city. The iconography of the Alameda as well as its incorporation into the propagandist use of urban planning in the 1930s and 1940s exemplify the visual politics during Salazarism. Urban planning programs intended to create cities that would preserve the character of a traditional catholic society and at the same time answer to the need to modernize the country and evoke the image of a progressive state. Thus, public buildings and urban squares such as the Alameda contributed to design a corporate image and to the ‘spirit’ of the regime.

Sonae MC: The road model of Kaizen

Sonae MC is considered the first success case of Kaizen in the retail industry. Before becoming a true role model for so many companies, there was a long road to walk. However, it may still be hard to understand the steps taken on the way. How could a training program develop into an integral continuous improvement system, and how did it affect the company – its people, culture, operations and strategy? How was it possible to get everyone on board? How could it be sustained until today, when Kaizen usually fails in the West? What were the critical factors for success?

On project finance and the first road concession in Portugal

In broad sense, Project Financing1 as a mean of financing large scale infrastructural projects worldwide has had a steady growth in popularity for the last 20 years. This growth has been relatively unscathed from most economic cycles. However in the wake of the 2007 systemic Financial Crisis, Project Financing was also in trouble. The liquidity freeze and credit crunch that ensued affected all parties involved. Traditional Lenders, of this type of financial instrument, locked-in long-term contractual obligations, were severely hit with scarcity of funding compounded by rapidly increasing cost of funding. All the while, Banks were “rescued” by the concerted actions of Central Banks and other Multi-Lateral Agencies around the world but at the same time “stressed” by upcoming regulatory effort (Basel Committee). This impact resulted in specific changes to this type of long-term financing. Changes such as Commercial Banks’ increased risk aversion; pricing increase and maturities decrease of credit facilities; enforcement of Market Disruption Event clauses; partial responsibility for project risk by Multilateral Agencies; and adoption of utility-like availability payments in other industrial sectors such as transportation and even social infrastructure. To the extent possible, this report is then divided in three parts. First, it begins with a more instructional part, touching academic literature (theory) and giving the Banks perspective (practice), but mostly as an overview of Project Finance for awareness’ sake. The renowned Harvard Business School professor – Benjamin Esty, states2 that Project Finance is a “relatively unexplored territory for both empirical and theoretical research” which means that academic research efforts are lagging the practice of Project Finance. Second, the report presents a practical case regarding the first Road Concession in Portugal in 1998 ending with the lessons learned 10 years after Financial Close. Lastly, the report concludes with the analysis of the current trends and changes to the industry post Financial Crisis of the late 2000’s. To achieve this I’ll reference relevant papers, books on the subject, online articles and my own experience in the Project Finance Department at a major Portuguese Investment Bank. Regarding the latter, with the signing of a confidentiality agreement, I’m duly omitting sensitive and proprietary bank information.

Contingent contracts

International businesses bring with them additional negotiation complexities and extra risks, thus calling for negotiation integrative solutions and additional legal protection. The recent economic crisis forced, companies, including SMEs, to look for international markets and face these additional complexities and issues. In the search for a practical and simplified solution, to serve less sophisticated companies, this paper brings insights from the negotiation literature to a specific legal issue. Specifically, I investigate the negotiation and use of contingent agreements as a tool for facilitating the negotiation process and managing risk in international deals. Looking into an international sale of goods from Portugal to Brazil, this paper proposes the structuring of two contingent contracts related to two category of products in order to demonstrate the potential benefits of some of its relevant features, specifically the creation of incentives and identification and allocation of future risks. In general, the structuring of contingent agreements is likely to provide positive results in mitigating the issues of lack of trust and dealing with the additional risks derived from international deals, therefore facilitating and improving the overall quality of the deal.