Rastreio combinado do 1º trimestre e doenças autoimunes : Impacto das variaveis pré-analíticas na avaliação do risco

RESUMO: Contexto: As anomalias congénitas, com particular destaque para as neuploidias , afectam aproximadamente 2% dos recém-nascidos, constituindo causas frequentes de morbilidade e mortalidade. Actualmente, a avaliação do grau de risco para as aneuploidias mais prevalentes (T21, T13, T18) é efectuada através do “Rastreio Combinado do 1º Trimestre”, devendo as grávidas com risco acrescido ser sujeitas a exames invasivos (ex.biópsia das vilosidades coriónicas,amniocentese). Quanto mais qualidade existir num rastreio, menos falsos positivos existirão e menor o número de exames diagnósticos invasivos desnecessários. As doenças autoimunes são doenças inflamatórias crónicas em cuja fisiopatologia se encontram distúrbios da imunidade humoral e celular, dependentes de factores genéticos, hormonais,psicológicos e ambientais. Atingem mais o sexo feminino e durante a idade fértil,podendo influenciar o outcome da gravidez e a saúde neonatal causando significativa morbilidade e mortalidade. O lúpus eritematoso sistémico para além de potencialmente afectado pelas alterações imunoendócrinas fisiológicas da gravidez, associa-se frequentemente a problemas de fertilidade. Recentemente, foi sugerido que as anormalidades ocorridas durante a invasão precoce do sinciciotrofoblasto, resultando em deficiente diferenciação, deficiente maturação e diminuição na produção de hCG, poderão ser o mecanismo fisiopatológico primário para as perdas fetais no primeiro trimestre, nos doentes com SLE. A ocorrência de níveis elevados de hCG total e ß-hCG livre no rastreio para despiste de síndrome de Down do segundo e do primeiro trimestre foi assinalada em grávidas portadoras de lúpus, mas a escassez de estudos comprovativos e a pequena dimensão das amostras estudadas constituiu uma limitação significativa na fidedignidade dos resultados obtidos. Objectivos: O estudo teve como objectivos i. estabelecer valores normativos Portugueses e de distribuição para as MoM’s dos parâmetros séricos do primeiro trimestre, por semana de gestação:(PAPP-A e ß-hCG livre), ii. avaliar a influência que as doenças autoimunes têm sobre as MoM’s individuais dos parâmetros bioquímicos PAPP-A e/ou ß-hCG livre, utilizados no rastreio pré-natal combinado do 1º trimestre, e iii. saber se as doenças autoimunes podem condicionar um aumento da taxa de resultados falsos positivos, com consequente aumento do número de amniocenteses. Metodologia: Estudo longitudinal prospectivo, consistindo num rastreio pré-natal combinado de 1º trimestre para pesquisa de aneuploidias, em duas amostras provenientes do Reino Unido (n= 45,854) e de Portugal (n=3122). Foram avaliados parâmetros socio-demográficos, ecográficos, laboratoriais, e calculados os indicadores de desempenho do rastreio combinado. A execução analítica dos testes bioquímicos séricos (PAPP-A e ß-hCG livre) foi realizada no autoanalisador Brahms Kryptor e no autoanalizador 6000 Delfia Xpress. Compararam-se os grupos autoimune e não autoimune das amostras. Resultados: Relativamente às características populacionais, o grupo auto imune tinha valores significativamente superiores nas variáveis idade materna e idade gestacional. Comparando os grupos com e sem doença autoimune, constatou-se a existência de uma elevação das MoM’s da ß-hCG livre nas grávidas com doença autoimune, nomeadamente nos casos de lúpus eritematoso sistémico. Conclusões: os resultado obtidos reforçam a indicação do rastreio combinado do 1º trimestre certificado pela FMF nas grávidas com doenças autoimunes, nomeadamente para as doentes com LES; no entanto, devem ser calculados e introduzidos factores de correcção no algoritmo de risco, de modo a evitar a subida no número de resultados falso-positivos, e consequentemente a sobre- utilização de métodos invasivos.------------ ABSTRACT: Context: Congenital anomalies, with particular reference to aneuploidias, affect approximately 2% of newborns, and are frequent causes of morbidity and mortality. Currently, the risk evaluation for the most prevalent aneuploidias (T21, T13, T18) is carried out through the “combined first trimester screening”, and pregnant women with increased risk are subjected to invasive tests (e.g. villus biopsy done, amniocentesis). The more quality exists in a screening, less false positives exists and fewer unnecessary invasive diagnostic exams. Autoimmune diseases are chronic inflammatory diseases in whose pathophysiology are immune humoral and cellular disorders, dependent on genetic factors, hormonal, psychological and environmental factors. The disease is more prevalent among females, during the child-bearing age, and may influence the outcome of pregnancy and neonatal health causing significant morbidity and mortality. Lupus Erythematosus in addition to potentially affected by immunoendocrine physiological changes of pregnancy, is often associated with fertility problems. Recently, it has been suggested that the abnormalities that occurred during the early invasion of the syncytiotrophoblast, resulting in insufficient differentiation, deficient maturation and decrease in production of hCG may be the primary pathophysiological mechanism for fetal losses in the first quarter, in patients with SLE. The occurrence of elevated levels of total hCG and free ß-hCG in screening for Down’s syndrome of the second and first trimester was reported in pregnant women with lupus, but the paucity of supporting studies and the small size of the samples studied constituted a significant limitation on the trustworthiness of the results obtained. Objectives: this study aims to i. establish normative values for the serum parameters MoM’s (PAPP-A and free β-hCG) and it’s distribution, in the first trimester, by week of pregnancy; ii. assess the influence that the autoimmune diseases have on the MoM’s of individual biochemical PAPP-A and/or β-hCG, used in antenatal screening combined for the first trimester, and iii. whether the autoimmune diseases may make an increased rate of false positives, with consequent increase in the number of amniocenteses.Methodology: Prospective longitudinal study, consisting of a combined first trimester antenatal screening for aneuploidies lookup in two samples from the United Kingdom (n=45.854) and Portugal (n= 3.122). Socio-demographic, echographic and laboratory parameters were evaluated, and combined screening performance indicators were calculated. The analytical run of serum biochemical tests (PAPP-A and ß-hCG) was held at the Brahms Kryptor and in Delfia Xpress 6000. Comparisons between autoimmune group and non-autoimmune group were made. Results: Relating to population characteristics, the autoimmune group had significantly diferente values in the variables maternal age and gestational age. Comparing the groups with and without autoimmune disease, it was noted that there is an elevation of the MoM’s of free ß-hCG levels in pregnant women with autoimmune disease, particularly in cases of systemic lupus erythematosus. Conclusions: The results obtained reinforce the indication of FMF certified combined screening in pregnant women with autoimmune diseases, notably to the patients with SLE; However, correction factors should be calculated and entered in the risk algorithm, in order to avoid the rise in the number of false positive results, and consequently the over-use of invasive methods.

Correction of the anisotropy in resistivity: application to pore pressure prediction

Dissertação para obtenção do Grau de Mestre em Engenharia Geológica (Georrecursos)

Influence of the molecular weight in mechanical properties and degradation kinetics of chitosan inverted colloidal crystals

Tissue engineering arises from the need to regenerate organs and tissues, requiring the development of scaffolds, which can provide an optimum environment for tissue growth. In this work, chitosan with different molecular weights was used to develop biodegradable 3D inverted colloidal crystals (ICC) structures for bone regeneration, exhibiting uniform pore size and interconnected network. Moreover, in vitro tests were conducted by studying the influence of the molecular weight in the degradation kinetics and mechanical properties. The production of ICC included four major stages: fabrication of microspheres; assembly into a cohesive structure, polymeric solution infiltration and microsphere removal. Chitosan’s degree of deacetylation was determined by infrared spectroscopy and molecular weight was obtained via capillary viscometry. In order to understand the effect of the molecular weight in ICC structures, the mass loss and mechanical properties were analyzed after degradation with lysozyme. Structure morphology observation before and after degradation was performed by scanning electron microscopy. Cellular adhesion and proliferation tests were carried out to evaluate ICC in vitro response. Overall, medium molecular weight ICC revealed the best balance in terms of mechanical properties, degradation rate, morphology and biological behaviour.

Characterization tests for insulation boards made from corn cob and natural glues

In recent years there has been a growing interest in developing news solutions for more ecologic and efficient construction, including natural, renewable and local materials, thus contributing in the search for more efficient, economic and environmentally friendly construction. Several authors have assessed the possibility of using various agricultural sub products or wastes, as part of the effort of the scientific community to find alternative and more ecologic construction materials. Corn cob is an agricultural waste from a very important worldwide crop. Natural glues are made from natural materials, non-mineral, that can be used as such or after some modifications to achieve the behaviour and performance required. Two examples of these natural glues are casein and wheat flour-based glues that were used in the present study. Boards with different compositions were manufactured, having as variables the type of glue, the dimension of the corn cob particles and the features of the pressing process. The tests boards were characterized with physical and mechanical tests, such as thermal conductivity (λ) with a ISOMET 2104 and 60 mm diameter contact probe, density (ρ) based on EN 1602:2013, surface hardness (SH) with a PCE Shore A durometer, surface resistance (SR) with a PROCEQ PT pendular sclerometer, bending behaviour (σ) based on EN 12089:2013, compression behaviour (σ10) based on EN 826:2013 and resilience (R) based on EN 1094-1:2008, with a Zwick Rowell bending equipment with 2 kN and 50 kN load cells (Fig. 1), dynamic modulus of elasticity (Ed) with a Zeus Resonance Meter equipment (Fig. 5) based on NP EN 14146:2006 and water vapour permeability (δ) based on EN 12086:2013. The various boards produced were characterized according to the tests and the ones with the best results were C8_c8 (casein glue, grain size 2,38-4,76 mm, cold pressing for 8 hours), C8_c4 (casein glue, grain size 2,38-4,76 mm, cold pressing for 4 hours), F8_h0.5 (wheat flour glue, grain size 2,38-4,76 mm, hot pressing for 0,5 hours), FEV8_h0.5 (wheat flour, egg white and vinegar glue, grain size 2,38-4,76 mm, hot pressing for 0,5 hours) and FEVH68_c4 (wheat flour, egg white, vinegar and 6 g of sodium hydroxide glue, grain size 2,38-4,76 mm, cold pressing for 4 hours). Taking into account the various boards produced and respective test results the type of glue and the pressure and pressing time are very important factors which strongly influence the final product. The results obtained confirmed the initial hypotheses that these boards have potential as a thermal and, eventually, acoustic insulation material, to use as coating or intermediate layer on walls, floors or false ceilings. This type of board has a high mechanical resistance when compared with traditional insulating materials.The integrity of these boards seems to be maintained even in higher humidity environments. However, due to biological susceptibility and sensitivity to water, they would be more adequate for application in dry interior conditions.

Brucelose na Província do Namibe, Angola, 2012 : prevalências humana (profissionais da pecuária) e animal, factores de risco, conhecimento e práticas

RESUMO - Enquadramento: A Brucelose é uma antropozoonose prevalente no Mundo e é uma das mais negligenciadas. A sua transmissão ao ser humano é directa e indirecta, e acontece por via de contacto com animal infectado, o consumo de leite e seus derivados não pasteurizados e a não observância de uso de equipamentos de protecção individual e colectiva, entre outros factores. O conhecimento da prevalência e incidência da brucelose animal e humana no Namibe, uma província de Angola, é muito escasso sendo poucos os estudos que evidenciam esta doença no seio dos profissionais da pecuária expostos: trabalhadores de matadouros, veterinários e criadores de gado. É assim pertinente, com base em estudos científicos específicos, caracterizar esta situação. Objectivos: Caracterizar os ambientes dos profissionais (matadouro, talhos e salas municipais de abate e explorações); estimar a seroprevalência da brucelose humana em profissionais da pecuária (trabalhadores de matadouros e criadores de gado bovino) na província do Namibe, Angola em 2012; determinar a associação da presença da brucelose humana com variáveis sócio-demográficas, de conhecimento, de práticas e de características das explorações; determinar a prevalência da Brucelose em animais e em explorações; caracterizar os factores associados à presença da Brucelose em explorações bovinas; caracterizar o conhecimento e práticas sobre a Brucelose dos profissionais da pecuária e analisar a relação entre as prevalências nas explorações (infectadas versus não infectadas) e nos criadores (infectados versus não infectados). Métodos e materiais: estudos observacional e transversal seroepidemiológico em 131 trabalhadores de talhos, salas de abate e matadouro e 192 criadores amostrados aleatoriamente em toda província do Namibe. Os dados foram obtidos através da colheita de sangue e da aplicação de um questionário. Os testes laboratoriais utilizados foram o Rosa de Bengala (RBT) e a Aglutinação Lenta em Tubos (SAT). O estudo de conhecimento foi principalmente centrado na pergunta “Já ouviu falar de Brucelose” e nas questões relativas ao nível de conhecimento e práticas (indicadores baseados nas percentagens de respostas correctas ou práticas adequadas) dos factores de risco da Brucelose. Também foram investigados 1344 animais (em 192 explorações) com recurso ao método de diagnóstico laboratorial RBT para análise de soro sanguíneo e, complementarmente, foi aplicado um questionário aos respectivos criadores. Em termos de análise estatística, para além da abordagem descritiva, foram utilizados os testes de Independência do Quiquadrado, Fisher, Teste não paramétrico de Mann-Whitney, Teste de correlação de Spearman. Adicionalmente, com base em modelos de regressão logística, foram determinados odds ratio e os respectivos intervalos de confiança utilizando um nível de significância de 5%. Resultados: os ambientes dos profissionais (matadouro, talhos e salas municipais de abate e explorações) não reuniram as condições higio-sanitárias definidas internacionalmente como adequadas. Nos profissionais a infecção geral ponderada da Brucelose foi de 15.56% (IC95% : 13.61-17.50), sendo 5.34% em trabalhadores e 16.66% (IC95% : 11.39-21.93) em criadores. A significância estatística foi observada entre a seroprevalência humana e a categoria (trabalhador e criador) (p< 0.001) e o nível de instrução (p= 0.032), início de actividade (p= 0.079) e local de serviço (p= 0.055). Num contexto multivariado o factor positivamente associado à brucelose em profissionais foi a categoria profissional (OR = 3.54, IC95%: 1.57-8.30, relativo aos criadores em relação a trabalhadores). As taxas gerais aparentes de prevalência em animais e explorações foram respectivamente de 14.96% (IC 95%, 12.97-17.19) e de 40.10% (IC 95%, 32.75-47.93). Encontrou-se uma correlação positiva moderada entre o número de animais infectados por exploração com a média do número de abortos na exploração = 0.531, p< 0.001). Em média os profissionais tiveram um conhecimento global muito insuficiente (16.1%), tendo os trabalhadores apresentado valores mais elevados que os criadores (20.2% e 13.8%), diferença não estatisticamente significativa (p= 0.170). As perguntas “o leite in natura é fervido antes do consumo humano?”, “contacto com materiais fetais animais?”, “contacto com aerossóis no local de trabalho?” e “já fez alguma vez o teste de Brucelose humana?” (relacionadas com práticas) e as perguntas “já ouviu falar da Brucelose?”, “Brucelose é doença zoonótica/só animal/só humana? e “como a Brucelose se transmite aos humanos?” apresentaram níveis médios de práticas adequadas e conhecimentos correctos inferiores a 20%. Nas explorações infectadas, 39% dos criadores foram positivos (infectados) e nas não infectadas apenas 1.7%. O risco de um criador ser infectado estando numa exploração infectada foi significativamente mais elevado (OR= 36, IC95%: 8.28-157.04). Conclusões: os ambientes dos profissionais (matadouros, salas municipais de abate e talhos e explorações) propiciam o risco à brucelose. O estudo permite aferir que a Brucelose humana em profissionais da pecuária e a Brucelose animal são prevalentes na província do Namibe. Os níveis de seroprevalência detectados são elevados comparandoos com outros encontrados em algumas localidades africanas que possuem condições similares às do Namibe. Perto de duas em cada cinco (40.10%) explorações estão infectadas por esta doença. O número de abortos (média) está claramente relacionado com as explorações infectadas. O conhecimento geral dos profissionais da pecuária sobre a Brucelose é muito insuficiente, tendo os trabalhadores mostrado um maior conhecimento em relação aos criadores, mas ambos com níveis alarmantes. Os criadores infectados estão relacionados com as explorações infectadas. Há necessidade de controlar a doença e de informar e educar os profissionais sobre a brucelose, sendo fundamental que os serviços provinciais de veterinária reforcem acções de divulgação e de fiscalização.

What makes people stay in or leave shrinking cities? An empirical study from Portugal

The relative attractiveness of cities as places to live determines population movements in or out of them. Understanding the appealing features of a city is fundamental to local governments, particularly for cities facing population decline. Pull and push attributes of cities can include economic aspects, the availability of amenities and psychological constructs, initiating a discussion around which factors are more relevant in explaining migration. However, a pull–push approach has been underexplored in studies of shrinking cities. In the present study, we contribute to the discussion by identifying pull and push factors in Portuguese shrinking cities. Data were collected using a face-to-face questionnaire survey of 701 residents in four shrinking cities: Oporto, Barreiro, Peso da Régua and Moura. Factor analysis and automatic linear modelling were used to analyse the data. Our results support previous findings that the economic activity of a city is the most relevant feature for retaining residents. However, other characteristics specific to each city, especially those related to heritage and natural beauty, are also shown to influence a city’s attractiveness as a place to live. The cause of population shrinkage is also found to influence residents’ assessments of the pull and push attributes of each city. Furthermore, the results show the relevance of social ties and of place attachment to inhabitants’ intention to continue living in their city of residence.

Image processing for displacement measurements

Since the invention of photography humans have been using images to capture, store and analyse the act that they are interested in. With the developments in this field, assisted by better computers, it is possible to use image processing technology as an accurate method of analysis and measurement. Image processing's principal qualities are flexibility, adaptability and the ability to easily and quickly process a large amount of information. Successful examples of applications can be seen in several areas of human life, such as biomedical, industry, surveillance, military and mapping. This is so true that there are several Nobel prizes related to imaging. The accurate measurement of deformations, displacements, strain fields and surface defects are challenging in many material tests in Civil Engineering because traditionally these measurements require complex and expensive equipment, plus time consuming calibration. Image processing can be an inexpensive and effective tool for load displacement measurements. Using an adequate image acquisition system and taking advantage of the computation power of modern computers it is possible to accurately measure very small displacements with high precision. On the market there are already several commercial software packages. However they are commercialized at high cost. In this work block-matching algorithms will be used in order to compare the results from image processing with the data obtained with physical transducers during laboratory load tests. In order to test the proposed solutions several load tests were carried out in partnership with researchers from the Civil Engineering Department at Universidade Nova de Lisboa (UNL).

Modeling and forecasting value-at-risk for the Portuguese stock market

The aim of this work project is to find a model that is able to accurately forecast the daily Value-at-Risk for PSI-20 Index, independently of the market conditions, in order to expand empirical literature for the Portuguese stock market. Hence, two subsamples, representing more and less volatile periods, were modeled through unconditional and conditional volatility models (because it is what drives returns). All models were evaluated through Kupiec’s and Christoffersen’s tests, by comparing forecasts with actual results. Using an out-of-sample of 204 observations, it was found that a GARCH(1,1) is an accurate model for our purposes.

Flood resilient housing recovery models: a theoretical case study in Maldives

Natural disasters are events that cause general and widespread destruction of the built environment and are becoming increasingly recurrent. They are a product of vulnerability and community exposure to natural hazards, generating a multitude of social, economic and cultural issues of which the loss of housing and the subsequent need for shelter is one of its major consequences. Nowadays, numerous factors contribute to increased vulnerability and exposure to natural disasters such as climate change with its impacts felt across the globe and which is currently seen as a worldwide threat to the built environment. The abandonment of disaster-affected areas can also push populations to regions where natural hazards are felt more severely. Although several actors in the post-disaster scenario provide for shelter needs and recovery programs, housing is often inadequate and unable to resist the effects of future natural hazards. Resilient housing is commonly not addressed due to the urgency in sheltering affected populations. However, by neglecting risks of exposure in construction, houses become vulnerable and are likely to be damaged or destroyed in future natural hazard events. That being said it becomes fundamental to include resilience criteria, when it comes to housing, which in turn will allow new houses to better withstand the passage of time and natural disasters, in the safest way possible. This master thesis is intended to provide guiding principles to take towards housing recovery after natural disasters, particularly in the form of flood resilient construction, considering floods are responsible for the largest number of natural disasters. To this purpose, the main structures that house affected populations were identified and analyzed in depth. After assessing the risks and damages that flood events can cause in housing, a methodology was proposed for flood resilient housing models, in which there were identified key criteria that housing should meet. The same methodology is based in the US Federal Emergency Management Agency requirements and recommendations in accordance to specific flood zones. Finally, a case study in Maldives – one of the most vulnerable countries to sea level rise resulting from climate change – has been analyzed in light of housing recovery in a post-disaster induced scenario. This analysis was carried out by using the proposed methodology with the intent of assessing the resilience of the newly built housing to floods in the aftermath of the 2004 Indian Ocean Tsunami.

Strengthening to seismic action of reinforced columns with rectangular cross-section

The first part of this research work regards the assessment of the mathematical modelling of reinforced concrete columns confined with carbon fibre (CFRP) sheets under axial loading. The purpose was to evaluate existing analytical models, contribute to possible improvements and choose the best model(s) to be part of a new model for the prediction of the behaviour of confined columns under bending and compression. For circular columns, a wide group of authors have proposed several models specific for FRP-confined concrete. The analysis of some of the existing models was carried out by comparing these with several tested columns. Although several models predict fairly the peak load only few can properly estimate the load-strain and dilation behaviour of the columns. Square columns confined with CFRP show a more complex interpretation of their behaviour. Accordingly, the analysis of two experimental programs was carried out to propose new modelling equations for the whole behaviour of columns. The modelling results show that the analytical curves are in general agreement with the presented experimental curves for a wide range of dimensions. An analysis similar to the one done for circular columns was this turn carried out for square columns. Few models can fairly estimate the whole behaviour of the columns and with less accuracy at all levels when compared with circular columns. The second part of this study includes seven experimental tests carried out on reinforced concrete rectangular columns with rounded corners, different damage condition and with confinement and longitudinal strengthening systems. It was concluded that the use of CFRP confinement is viable and of effective performance enhancement alone and combined with other techniques, maintaining a good ductile behaviour for established threshold displacements. As regards the use of external longitudinal strengthening combined with CFRP confinement, this system is effective for the performance enhancement and viable in terms of execution. The load capacity was increased significantly, preserving also in this case a good ductile behaviour for threshold displacements. As to the numerical nonlinear modelling of the tested columns, the results show a variation of the peak load of 1% to 10% compared with tests results. The good results are partly due to the inclusion of the concrete constitutive model by Mander et al. modified by Faustino, Chastre & Paula taking into account the confinement effect. Despite the reasonable approximation to tests results, the modelling results showed higher unloading, which leads to an overestimate dissipated energy and residualdisplacement.

Overstock and stock-out in Volkswagen Autoeuropa

The following work is a case study of overstock and stock-out problems at Volkswagen Autoeuropa (VWAE). It introduces the supply chain of Autoeuropa and specializes then on failures connected to inventory problems. Having a successful supply chain is important in a world where products become more and more similar as it can give to companies an edge over their competitors. The case shows three practices that VWAE uses to prevent and to overcome stock problems. Information was gathered by doing interviews with different managers, by analyzing the company’s key processes and by literature research related to the topics of supply chain management and flexibility in the supply chain. Three practices were further investigated: the use of alternative parts, support of the supplier and a rating system of suppliers. In the question section of this work the importance of flexibility and Supplier Relationship Management (SRM) when connected to supply chain management are explained. The described different practices are numerically analyzed and it is concluded that each practice brings both cost savings and the possibility of achieving target numbers to the company, showing the company’s flexibility to react to supply chain disturbances. Because of confidentiality reasons, persons in the case are fictionalized and numbers are wherever possible equalized to 100 in order to display true proportions.

Basel III new capital requirements, impacts and bank behavior

For some years, researchers could not find a clear effect of capital adequacy on the risk profile of banks, as shareholders could increase the riskiness of the assets (qualitative effect), crowding-out the effect of reduced leverage (volume effect). Some shareholders might have the will to increase the riskiness of the assets, but they may lack the power to do so. Considering only ”powerful” shareholders, definitive conclusions were drawn but with constant ownership profile. In this paper I investigate whether there is a significant change in the type of shareholders in response to regulatory capital shocks and, if so, will the banking system be in the hands of more “desired” shareholders. I find that ownership profile responds to a regulatory shock, changing the risk appetite of the ruling power at the bank. I find more banks and the government in the ownership of undercapitalised banks and much less institutional shareholders and free float. I claim that these new shareholders may not the desired ones, given the objective of the regulatory change, as they are associated with a preference for more leverage. One possible explanation for this crowding-out effect is that regulators are trying to contain idiosyncratic risk (more linked to the riskiness of the assets) with a rule that contains systematic risk (capital adequacy). This has a distorting effect on ownership. Another insight can be drawn from the tests: supervisors should be aware of significant ownership movements that cause the crowding-out.

Optimisation and design of post-tensioning anchorage corner blisters in concrete box girder bidges

The design of anchorage blisters of internal continuity post-tensioning tendons of bridges built by the cantilever method, presents some peculiarities, not only because they are intermediate anchorages but also because these anchorages are located in blisters, so the prestressing force has to be transferred from the blister the bottom slab and web of the girder. The high density of steel reinforcement in anchorage blisters is the most common reason for problems with concrete cast in situ, resulting in zones with low concrete compacity, leading to concrete crushing failures under the anchor plates. A solution may involve improving the concrete compression and tensile strength. To meet these requirements a high-performance fibre reinforced self-compacting mix- ture (HPFRC) was used in anchorage corner blisters of post-tensioning tendons, reducing the concrete cross-section and decreasing the reinforcement needed. To assess the ultimate capacity and the adequate serviceability of the local anchorage zone after reducing the minimum concrete cross-section and the confining reinforcement, specified by the anchorage device supplier for the particular tendon, load transfer tests were performed. To investigate the behaviour of anchorage blisters regarding the transmission of stresses to the web and the bottom slab of the girder, and the feasibility of using high performance concrete only in the blister, two half scale models of the inferior corner of a box girder existing bridge were studied: a reference specimen of ordinary reinforced concrete and a HPFRC blister specimen. The design of the reinforcement was based in the tensile forces obtained on strut-and-tie models. An experimental program was carried out to assess the models used in design and to study the feasibility of using high performance concrete only in the blister, either with casting in situ, or with precast solutions. A non-linear finite element analysis of the tested specimens was also performed and the results compared.

Characterization of earth-based mortars for rammed earth repair

All over the world, many earth buildings are deteriorating due to lack of maintenance and repair. Repairs on rammed earth walls are mainly done with mortars, by rendering application; however, often the repair is inadequate, resorting to the use of incompatible materials, including cement-based mortars. It has been observed that such interventions, in walls that until that day only had presented natural ageing issues, created new problems, much more dangerous for the building than the previous ones, causing serious deficiencies in this type of construction. One of the problems is that the detachment of the new cement-based mortar rendering only occurs after some time but, until that occurrence, degradations develop in the wall itself. When the render detaches, instead of needing only a new render, the surface has to be repaired in depth, with a repair mortar. Consequently, it has been stablished that the renders, and particularly repair mortars, should have physical, mechanical and chemical properties similar to those of the rammed earth walls. This article intends to contribute to a better knowledge of earth-based mortars used to repair the surface of rammed earth walls. The studied mortars are based on four types of earth: three of them were collected from non-deteriorated parts of walls of unstabilized rammed earth buildings located in Alentejo region, south of Portugal; the fourth is a commercial earth, consisting mainly of clay. Other components were also used, particularly: sand to control shrinkage; binders stabilizers such as dry hydrated air-lime, natural hydraulic lime, Portland cement and natural cement; as well as natural vegetal fibers (hemp fibers). The experimental analysis of the mortars in the fresh state consisted in determining the consistency by flow table and the bulk density. In the hardened state, the tests made it possible to evaluate the following properties: linear and volumetric shrinkage; capillary water absorption; drying capacity; dynamic modulus of elasticity; flexural and compressive strength.

Analysis and treatment of a nineteenth century portrait, study of Artsorb® and a proposal for a microclimate frame

The present work is divided in two parts: Part 1 is focused on the analysis and treatment of a 19th century portrait of Domingos Affonso, which belongs to the Ecomuseu Municipal do Seixal; and Part 2, which is entitled “The Microclimate Frame Project” is focused on the study of Artsorb® and on the planning of a microclimate frame for the painting. In Part 1, a study of the painting’s materials was performed using complementary analytical techniques and the painting’s condition was carefully evaluated. The painting exhibited signs of mould growth, and a more detailed investigation was made of this topic to understand if the fungal community was active and if it represented a real danger to the painting. A treatment was proposed, appropriate to the painting’s condition. A description of the treatment carried out, comprising the treatment options, is also present in this section. Within the study of the microclimate frame, in Part 2, the study of the potential corrosiveness of Artsorb® was a central subject. Artsorb® sheets are one of the most widely used materials for buffering relative humidity fluctuations in microclimate frames and its reported excellent performance is enhanced by its availability in lightweight sheets that can be easily placed inside microclimate frames. However, concerns have arisen regarding the presence of the corrosive salt lithium chloride in the composition of this buffer. Consequently, the present work also aimed to understand the potential risks of using Artsorb® and the possibility of avoiding exposure of lithium chloride to the artworks through the use of Tyvek®. Results from the preliminary tests seem to indicate that Artsorb® releases lithium chloride into air. This study also showed that a Tyvek® cover over Artsorb® reduces but does not eliminate evidence of chlorine contamination, and it significantly reduces the effectiveness of the buffering material. Considering that Artsorb® appears to be unsuitable due to the release of the corrosive salt, that Tyvek® was not efficient as a barrier for lithium chloride or as a permeable material to enable the proper functioning of Artsorb®, the buffering material proposed for the use in the microclimate frames is silica gel without indicator. Based on the choice of buffering material, as a result of this study, a microclimate frame is proposed.