Psychological contract in non-governmental organizations

A Work Project, presented as part of the requirements for the Award of a Masters Degree in Management from the NOVA – School of Business and Economics

Porous structures for the purification of biopharmaceuticals

This work aimed at the development of a (bio)polymeric monolithic support for biopharmaceuticals purification and/or capture. For that, it was assured that functional groups on its surface were ready to be involved in a plethora of chemical reactions for incorporation of the desired and most suitable ligand. Using cryogelation as preparation method a screening on multiple combinations of materials was performed in order to create a potentially efficient support with the minimal footprint, i.e. a monolithic support with reasonable mechanical properties, highly permeable, biocompatible, ready to use, with gravitational performance and minimal unspecific interactions towards the target molecules, but also biodegradable and produced from renewable materials. For the pre-selection all monoliths were characterized physico-chemically and morphologically; one agarose-based and two chitosan-based monoliths were then subjected to further characterizations before and after their modification with magnetic nanoparticles. These three specimens were finally tested towards adenovirus and the recovery reached 84% for the chitosan-GMA plain monolith prepared at -80°C. Monoliths based on chitosan and PVA were prepared in the presence and absence of magnetic particles, and tested for the isolation of GFP directly from crude cellular extracts. The affinity ligand A4C7 previously selected for GFP purification was synthesized on the monolith. The results indicated that the solid-phase synthesis of the ligand directly onto the monolith might require optimization and that the large pores of the monoliths are unsuitable for the purification of small proteins, such as GFP.

Assessing the efficacy of the Mental Health Gap Action Programme (mhGAP) training for non-specialized health workers in Ethiopia

RESUMO: A OMS lançou em 2008, o Programa de Acção do Gap em Saúde Mental (mhGAP) para suprir a falta de cuidados, especialmente em países de rendimento baixo e médio, para as pessoas que sofrem de perturbações mentais, neurológicas e de uso de substâncias (MNS). Um componente crucial do mhGAP é representado pelo esforço no sentido da integração da saúde mental nos cuidados de saúde primários. Na Etiópia, o mhGAP foi monitorizado durante 3 anos, graças a um projeto de demonstração implementado em clínicas selecionadas em quatro regiões do país. A fase de demonstração de mhGAP na Etiópia traduziu-se principalmente na formação de profissionais de saúde não especializados, fornecendo-lhes orientação e supervisão apoiada para a utilização de medicamentos psicotrópicos essenciais e na coordenação com o Ministério Etíope Federal da Saúde, Hospital Amanuel de Saúde Mental e as Secretarias Regionais de Saúde ( RHBs ). O presente trabalho investigou a eficácia do pacote de formação mhGAP através de uma análise das pontuações dos participantes no pré- e pós-testes. A análise estatística mostrou - com uma exceção - que a melhoria dos formandos é estatisticamente significativa, o que sugere que os conhecimentos dos participantes é melhorada na fase de pós-teste. A eficácia do pacote de formação mhGAP para profissionais de saúde não especializados é uma evidência promissora de que os mesmos podem ser treinados com sucesso para realizar um pacote básico de intervenções para a prestação de cuidados e tratamento para pessoas com perturbações mentais, neurológicas e de uso de substâncias. Este trabalho destaca, também, várias limitações não apenas inerentes ao próprio projecto de investigação tais como o número limitado de respostas que foram analisadas e a falta de dados de uma das quatro regiões onde mhGAP foi testado na Etiópia. As principais limitações decorrem de facto da abordagem global limitar as intervenções de saúde mental ao programa de formação e supervisão dos trabalhadores de cuidados de saúde primários . Este processo só será bem sucedido se, juntamente com outras intervenções - que vão desde o desenvolvimento de currículos para o desenvolvimento de uma legislação de saúde mental -, fôr incluído numa estratégia mais abrangente para a reforma da saúde mental e desafiar o status quo.-----------ABSTRACT:In 2008, WHO launched the Mental Health Gap Action Programme (mhGAP) to address the lack of care, especially in low- and middle- income countries, for people living with mental, neurological and substance use (MNS) disorders. A crucial component of mhGAP is represented by the endeavor towards integration of mental health into primary health care. In Ethiopia, mhGAP has been piloted for 3 years thanks to a demonstration project implemented in selected clinics in 4 regions of the country. The demonstration phase of mhGAP in Ethiopia has mainly translated into training of non-specialized health workers, providing them with mentorship and supportive supervision, availing essential psychotropic medications and coordinating with the Ethiopian Federal Ministry of Health, Amanuel Mental Health Hospital and the Regional Health Bureaus (RHBs). The present paper investigated the efficacy of the mhGAP training package through an analysis of the participants’ scores at pre-test and post-test. The statistical analysis showed - with one exception - that the improvement of trainees is statistically significant, therefore suggesting that the knowledge of participants is improved in the post-test phase. The efficacy of the mhGAP training package on non-specialized health workers is promising evidence that non-specialized health-care providers can be successfully trained to deliver a basic package of interventions for providing care and treatment for people with mental, neurological and substance use disorders. However, this paper also highlights several limitations, which are not only inherent to the research itself, such as the limited number of scores that was analyzed, or the lack of data from one of the four regions where mhGAP has been piloted in Ethiopia; major limitations occur in fact in the overall approach of confining mental health interventions to training and supervising primary health care workers. This process will only be successful if coupled with other interventions – ranging from curricula development to development of a mental health legislation - and if it is included in a more comprehensive strategy to reform mental health and challenge the status quo.

Spectroscopic characterization of natural dyes by their non-invasive identification on pre-Columbian codices: the Maya yellow

Mesoamerican cultures had a strong tradition of written and pictorial manuscripts, called the codices. In studies already performed it was found the use of Maya Blue, made from a mixture of indigo and a clay called palygorskite, forming an incredibly stable material where the dye is trapped inside the nanotubes of the clay, after heating. However, a bigger challenge lies in the study of the yellows used, for these civilizations might have used this clay-dye mixture to produce their yellow colorants. As a first step, it was possible to provide identification, by non-invasive methods, of two colorants (a flavonoid and a carotenoid). While the flavonoid absorbed between 368-379 nm, the carotenoid would absorb around 455 nm. A temperature study also conducted allowed to set 140ºC as the desirable temperature to heat the samples without degrading them. FT-IR, conventional Raman and SERS allowed us to understand the existence of a reaction between the dyes and the clays (palygorskite and kaolinite), however it is difficult to understand it in a molecular point of view. As a second step, five species of Mexican dyes were selected on the basis of historical sources. The Maya yellow samples were produced adapting the recipe proposed by Reyes-Valerio, supporting the yellow dyes extracted from the dried plants on the clays, with addition of water, and then heated at 140ºC. It was found that the addition of water in palygorskite would increase the pH, hence deprotonating the molecules having a clear negative effect in the color. A second recipe was developed, without the addition of water; however, it was found that the use of water based binders would still alter the color of the samples with palygorskite. In this case, kaolinite without heating yield better results as a Maya yellow hybrid. It was found that the Maya chemistry might not have been the same for all the colors. The Mesoamericans might have found that different dyes could work better to their desires if matched with different clays. It was noticeable that for a clear distinction between flavonoids and carotenoids the reflectance and emission studies suffice, but when clay is added, Raman techniques will perform better. For this reason, conventional Raman and SERS were employed in order to create a database for the Mesoamerican dyestuffs for a future identification.

Evaporation from porous building materials and its cooling potential

Evaporative cooling is a traditional strategy to improve summer comfort, which has gained renewed relevance in the context of the transition to a greener economy. Here, the potential for evaporative cooling of two common porous building materials, natural stone and ceramic brick, was evaluated. The work has relevance also to the protection of built heritage becauseevaporation underlies the problems of dampness and salt crystallization, which are so harmful and frequent in this heritage. It was observed that the drying rate of the materials is, in some cases, higher than the evaporation rate of a free water surface. Surface area measurements by a three-dimensional optical technique suggested, as probable cause of this behavior, that surface irregularity gives rise to a large effective surface of evaporation in the material. Surface temperature measurements by infrared were performed afterward during evaporation experiments outside during a hot summer day in Lisbon. Their results indicate that ordinary building materials can be very efficient evaporative media and, thus, may help in achieving higher energy efficiency while maintaining a simultaneous constructive or architectural function.

Hydroxyapatite porous structures for bone tissue engineering

Esta dissertação teve como objetivo o desenvolvimento de espumas porosas de hidroxiapatite (HA) baseadas em réplicas invertidas de cristais coloidais (ICC) para substituição óssea. Um ICC é uma estrutura tridimensional de elevada porosidade que apresenta uma rede interconectada de poros com elevada uniformidade de tamanhos. Este tipo de arquitetura possibilita uma proliferação celular homogénea e superiores propriedades mecânicas quando comparada com espumas de geometria não uniforme. O cristal coloidal (CC) - o molde da espuma - foi criado por empacotamento de microesferas de poliestireno (270 μm) produzidas por microfluídica e posterior tratamento térmico. O molde foi impregnado com um gel de hidroxiapatite produzido via sol-gel utilizando pentóxido de fósforo e nitrato de cálcio tetrahidratado como percursores de fósforo e cálcio, respectivamente. A espuma cerâmica foi obtida num único passo depois de um tratamento térmico a 1100oC que permitiu a solidificação do gel e a remoção do CC. A análise por espetroscopia de infravermelho por transformada de Fourier (FTIR) e difração de raios-X (XRD) revelou uma hidroxiapatite carbonatada tipo A com presença de fosfatos tricálcicos. As propriedades mecânicas foram avaliadas por testes de compressão. A biocompatibilidade in vitro foi demonstrada através de testes de adesão e proliferação celular de osteoblastos.

Toxicity of carcinogenic and non-carcinogenic Polycyclic Aromatic Hydrocarbons and their mixtures to aquatic organisms under ecologically-relevant scenarios

Polycyclic aromatic hydrocarbons (PAHs) are ubiquitous priority pollutants that tend to be trapped in aquatic sediments due to their high hydrophobicity. Nonetheless, the differential toxicological effects and mechanisms between the various classes of PAHs and their mixtures, as they invariably occur in the environment, are scarcely known, especially under ecologically-relevant scenarios. This thesis aimed at establishing a bridge between the study of mechanistic pathways and environmental monitoring of carcinogenic and non-carcinogenic PAHs, by introducing ecological-relevance in the research with model PAHs. A first bioassay conducted in situ with the mussel Mytilus edulis demonstrated that, dredging operations in harbours increase PAH bioavailability, eliciting genotoxicity, and showed that established environmental guidelines underestimate risk. Subsequent ex situ bioassays were performed with the carcinogenic benzo[b]fluoranthene (B[b]F) and non-carcinogenic phenantrene (Phe), selected following preceding results, and revealed that low-moderate concentrations of these PAHs in spiked sediments induce genotoxic effects to the clam Ruditapes decussatus, therefore contradicting the general notion that bivalves are less sensitive to PAHs than vertebrates due to inefficient bioactivation. Also, it was demonstrated that passive samplers permit inferring on PAH bioavailability but not on bioaccumulation or toxic effects. On the other hand, sea basses (Dicentrarchus labrax), yielded a complex pattern of effects and responses, relatively to genotoxicity, oxidative stress and production of specific metabolites, especially when exposed to mixtures of the PAHs which led to additive, if not synergistic, effects. It was shown that Phe may elicit significant genotoxicity especially in presence of B[b]F, even though the low, albeit realistic, exposure concentrations diluted dose- and time-independent relationships. The present work demonstrated that environmental quality guidelines underestimate the effects of PAHs in realistic scenarios and showed that the significant genotoxic and histopathological effects caused by mixed PAHs may not be reflected by oxidative stress- or CYP-related biomarkers. Besides important findings on the metabolism of PAH mixtures, the work calls for the need to re-evaluate the criteria for assessing risk and for the disclosure of more efficient indicators of toxicological hazard.

Politicization of non-political events

Spatial analysis and social network analysis typically take into consideration social processes in specific contexts of geographical or network space. The research in political science increasingly strives to model heterogeneity and spatial dependence. To better understand and geographically model the relationship between “non-political” events, streaming data from social networks, and political climate was the primary objective of the current study. Geographic information systems (GIS) are useful tools in the organization and analysis of streaming data from social networks. In this study, geographical and statistical analysis were combined in order to define the temporal and spatial nature of the data eminating from the popular social network Twitter during the 2014 FIFA World Cup. The study spans the entire globe because Twitter’s geotagging function, the fundamental data that makes this study possible, is not limited to a geographic area. By examining the public reactions to an inherenlty non-political event, this study serves to illuminate broader questions about social behavior and spatial dependence. From a practical perspective, the analyses demonstrate how the discussion of political topics fluсtuate according to football matches. Tableau and Rapidminer, in addition to a set basic statistical methods, were applied to find patterns in the social behavior in space and time in different geographic regions. It was found some insight into the relationship between an ostensibly non-political event – the World Cup - and public opinion transmitted by social media. The methodology could serve as a prototype for future studies and guide policy makers in governmental and non-governmental organizations in gauging the public opinion in certain geographic locations.

(Non) - Demand driven servitization: strategic implications for suppliers from incorporating their customers up front

Double Degree. A Work Project, presented as part of the requirements for the Award of a Master’s Degree in Management from NOVA – School of Business and Economics and a Masters Degree in International Business, Strategy and Innovation from Maastricht University

Donations of non-financial resources: The motivation and consequences of measuring and accounting for it

This thesis focus on the measurement and accounting of contributions received by nonprofit organizations, as they are a significant component of revenues nowadays. A survey was developed and forward to 38 different NPOs, with the goal of understanding their motivations and what advantages and disadvantages they believe would result if they start to measure and account for all kinds of contributions. They presented many advantages from this practice; however, some are not doing it due to the difficulties in valuing contributions with no market value which would require a higher workload, waste of resources and time to be taken from other important activities.

Optimal choice between even- and uneven-aged forestry: the case of non-industrial private forest owners

An infinite-horizon discrete time model with multiple size-class structures using a transition matrix is built to assess optimal harvesting schedules in the context of Non-Industrial Private Forest (NIPF) owners. Three model specifications accounting for forest income, financial return on an asset and amenity valuations are considered. Numerical simulations suggest uneven-aged forest management where a rational forest owner adapts her or his forest policy by influencing the regeneration of trees or adjusting consumption dynamics depending on subjective time preference and market return rate dynamics on the financial asset. Moreover she or he does not value significantly non-market benefits captured by amenity valuations relatively to forest income.

Área 'non aedificandi' em domínio privado. História breve do interstício entre prédios em Portugal

Partindo dos dispositivos jurídicos em vigor (Código Civil e Regulamento Geral das Edificações Urbanas) e recuando até às antigas influências jurídicas (romanas e islâmicas), neste artigo procura-se perceber como os interstícios entre prédios em Portugal foram estabelecidos ao longo do tempo pela ordem jurídica. São contextualizadas e analisadas as antigas normas da almotaçaria e as normas contemporâneas, procurando perceber inovações e persistências. Por fim, realça-se a importância deste conhecimento para o estudo da forma urbana portuguesa.

Evolution of Teeth and Quadrate in Non-avian Theropoda (Dinosauria: Saurischia), with the Description of Torvosaurus Remains from Portugal

Theropods form a highly successful and morphologically diversified group of dinosaurs that gave rise to birds. They include most, if not all, carnivorous dinosaurs, yet many theropod clades were secondarily adapted to piscivory, omnivory and herbivory, and theropods show a large array of skull and dentition morphologies. This work aims to investigate aspects of the evolution of theropod dinosaurs by analyzing in detail both the anatomy and ontogeny of teeth and quadrates in non-avian theropods, and by studying embryonic and adult material of a new species of theropod. A standardized list of terms and notations for each anatomical entity of the tooth, quadrate, and maxilla is here proposed with the goal of facilitating descriptions of these important cranial and dental elements. The distribution of thirty dental characters among 113 theropod taxa is investigated, and a list of diagnostic dental characters is proposed. As an example, four isolated theropod teeth from the Lourinhã Formation (Kimmeridgian‒Tithonian) of Portugal are described and identified based on a cladistic analysis performed on a data matrix of 141 dentition-based characters coded in 60 taxa. Two shed teeth are referred to an abelisaurid, providing the first record of Abelisauridae in the Jurassic of Laurasia and the one of the oldest records of this clade in the world, suggesting a possible radiation of Abelisauridae in Europe well before the Upper Cretaceous. The consensus tree resulting from this phylogenetic analysis, the most extensive on theropod teeth, indicates that theropod teeth provide reliable data for identification at approximately family level, and this method will help identifying theropod teeth with more confidence. A detailed description of the dentition of Megalosauridae is also provided, and a discriminant analysis performed on a dataset of numerical data collected on the teeth of 62 theropod taxa reveals that megalosaurid teeth are hardly distinguishable from other theropod clades with ziphodont dentition. This study highlights the importance of detailing anatomical descriptions and providing additional morphometric data on teeth with the purpose of helping to identify isolated theropod teeth. In order to evaluate the phylogenetic potential and investigate the evolutionary transformations of the quadrate, a phylogenetic morphometric analysis as well as a cladistic analysis using 98 discrete quadrate related characters were conducted. The quadrate morphology by its own provides a wealth of data with strong phylogenetic signal, and the phylogenetic morphometric analysis reveals two main morphotypes of the mandibular articulation of the quadrate linked to function. As an example, six isolated quadrates from the Kem Kem beds (Cenomanian) of Morocco are determined to be from juvenile and adult individuals of Spinosaurinae based on phylogenetic, morphometric, and phylogenetic morphometric analyses. Morphofunctional analysis of the spinosaurid mandibular articulation has shown that the posterior parts of the two mandibular rami displaced laterally when the jaw was depressed due to a mediolaterally oriented intercondylar sulcus of the quadrate. Such lateral movement of the mandibular ramus was possible due to a movable mandibular symphysis in spinosaurids, allowing the pharynx to be widened. A new species of theropod from the Lourinhã Formation of Portugal, Torvosaurus gurneyi, is erected based on a right maxilla and an incomplete caudal centrum. This taxon supports the mechanism of vicariance that occurred in the Iberian Meseta during the Late Jurassic when the proto-Atlantic was already well formed. A theropod clutch containing several crushed eggs and embryonic material is also assigned to this new species of Torvosaurus. Investigation on the maxilla ontogeny in basal tetanurans reveals that crown denticles, elongation of the anterior ramus, and fusion of interdental plates appear at a posthatchling stage. On the other hand, maxillary pneumaticity is already present at an embryonic stage in non-avian theropods.

Why and how projects in organizations differ? The example of Portuguese profit and non-profit organizations

This research has as a goal to give an overview of what Project Management is in Portugal. The purpose is not to focus on a small picture, but to understand the broad concept and perception of Project Management in Portugal in two very important sectors: Profit- and Non-Profit Sector. Both Profit- and Non-Profit project managers have been interviewed, giving an insight of how different projects are in both sectors and why. This paper will be especially helpful comparing the Project Management maturity of Portugal to other countries regarding these two different point of views.

Non-gyrator type active inductors

Modern CMOS radio frequency (RF) Receivers have enabled efficient and increasing applications. The main requirement is to have system in a single chip, in order to minimize area and cost. For the purpose it is required the development of inductorless circuits for the key blocks of an RF receiver. Examples of this key blocks are RC oscillators, RF band pass filters, and Low Noise Amplifiers. The present dissertation presents an inductorless wideband MOSFET-only RF Non-Gyrator Type of Active Inductors with low area, low cost, and very low power, capable of covering the whole WMTS, and ISM, band and intended for biomedical applications. The proposed circuit is based on a floating capacitor connected between two controlled current sources. The first current source, which is controlled by the circuit input voltage, has two objectives: supply current to the capacitor (