Web-assisted tobacco intervention in Portuguese : intentions to make behavioural changes and behavioural changes

ABSTRACT - The problem of how to support “intentions to make behavioural changes” (IBC) and “behaviour changes” (BC) in smoking cessation when there is a scarcity of resources is a pressing issue in public health terms. The present research focuses on the use of information and communications technologies and their role in smoking cessation. It is developed in Portugal after the ratification of WHO Framework Convention on Tobacco Control (on 8 November 2005). The prevalence of smokers over fifteen years of age within the population stood at 20.9% (30.9% for men and 11.8% for women). While the strategy of helping people to quit smoking has been emphasised at National Health Service (NHS) level, the uptake of cessation assistance has exceeded the capacity of the service. This induced the search of new theoretical and practical venues to offer alternative options to people willing to stop smoking. Among these, the National Health Plan (NHP) of Portugal (2004-2010), identifies the use of information technologies in smoking cessation. eHealth and the importance of health literacy as a means of empowering people to make behavioural changes is recurrently considered an option worth investigating. The overall objective of this research is to understand, in the Portuguese context, the use of the Internet to help people to stop smoking. Research questions consider factors that may contribute to “intentions to make behavioural changes” (IBC) and “behavioural changes” (BC) while using a Web-Assisted Tobacco Intervention Probe (WATIP). Also consideration is given to the trade-off on the use of the Web as a tool for smoking cessation: can it reach a vast number of people for a small cost (efficiency) demonstrating to work in the domain of smoking cessation (efficacy)”? In addition to the introduction, there is a second chapter in which the use of tobacco is discussed as a public health menace. The health gains achieved by stopping smoking and the means of quitting are also examined, as is the use of the Internet in smoking cessation. Then, several research issues are introduced. These include background theory and the theoretical framework for the Sense of Coherence. The research model is also discussed. A presentation of the methods, materials and of the Web-Assisted Tobacco Intervention Probe (WATIP) follows. In chapter four the results of the use of the Web-Assisted Tobacco Intervention Probe (WATIP) are presented. This study is divided into two sections. The first describes results related to quality control in relation to the Web-Assisted Tobacco Intervention Probe (WATIP) and gives an overview of its users. Of these, 3,150 answered initial eligibility questions. In the end, 1,463 met all eligibility requirements, completed intake, decided on a day to quit smoking (Dday) and declared their “intentions to make behavioural changes” (IBC) while a second targeted group of 650 did not decide on a Dday. With two quit attempts made before joining the platform, most of the participants had experienced past failures while wanting to stop. The smoking rate averaged 21 cigarettes per day. With a mean age of 35, of the participants 55% were males. Among several other considerations, gender and the Sense of Coherence (SOC) influenced the success of participants in their IBC and endeavour to set quit dates. The results of comparing males and females showed that, for current smokers, establishing a Dday was related to gender differences, not favouring males (OR=0.76, p<0.005). Belonging to higher Socio-economic strata (SES) was associated with the intention to consider IBC (when compared to lower SES condition) (OR=1.57, p<0.001) and higher number of school years (OR=0.70, p<0.005) favoured the decision to smoking cessation. Those who demonstrated higher confidence in their likelihood of success in stopping in the shortest time had a higher rate of setting a Dday (OR=0.51, p<0.001). There were differences between groups in IBC reflecting the high and low levels of the SOC score (OR=1.43, p=0.006), as those who considered setting a Dday had higher levels of SOC. After adjusting for all variables, stages of readiness to change and SOC were kept in the model. This is the first Arm of this research where the focus is a discussion of the system’s implications for the participants’ “intentions to make behavioural changes” (IBC). Moreover, a second section of this study (second Arm) offers input collected from 77 in-depth interviews with the Web-Assisted Tobacco Intervention Probe (WATIP) users. Here, “Behaviour Change” (BC) and the usability of the platform are explored a year after IBC was declared. A percentage of 32.9% of self-reported, 12-month quitters in continuous abstinence from smoking from Dday to the 12-month follow- up point of the use of the Web-Assisted Tobacco Intervention Probe (WATIP) has been assessed. Comparing the Sense of Coherence (SOC) scores of participants by their respective means, according to the two groups, there was a significant difference in these scores of non smokers (BC) (M=144,66, SD=22,52) and Sense of Coherence (SOC) of smokers (noBC) (M=131,51, SD=21,43) p=0.014. This WATIP strategy and its contents benefit from the strengthening of the smoker’s sense of coherence (SOC), so that the person’s progress towards a life without tobacco may be experienced as comprehensible, manageable and meaningful. In this sample the sense of coherence (SOC) effect is moderate although it is associated with the day to quit smoking (Dday). Some of the limitations of this research have to do with self-selection bias, sample size (power) and self-reporting (no biochemical validation). The enrolment of participants was therefore not representative of the smoking population. It is not possible to verify the Web-Assisted Tobacco Intervention Probe (WATIP) evaluation of external validity; consequently, the results obtained cannot be applied generalized. No participation bias is provided. Another limitation of this study is the associated limitations of interviews. Interviewees’ perception that fabricating answers could benefit them more than telling the simple truth in response to questions is a risk that is not evaluated (with no external validation like measuring participants’ carbon monoxide levels). What emerges in this analysis is the relevance of the process that leads to the establishment of the quit day (Dday) to stop using tobacco. In addition, technological issues, when tailoring is the focus, are key elements for scrutiny. The high number of dropouts of users of the web platform mandates future research that should concentrate on the matters of the user-centred design of portals. The focus on gains in health through patient-centred care needs more research, so that technology usability be considered within the context of best practices in smoking cessation.

Geospatial technologies for public participation: better decisions for smarter cities?

Dissertation submitted in partial fulfillment of the requirements for the Degree of Master of Science in Geospatial Technologies.

Web Processing Services for Forestry and Environmental Applications

Dissertation submitted in partial fulfillment of the requirements for the Degree of Master of Science in Geospatial Technologies.

Design, implementation, and performance of a distributed and scalable sensor system for critical distance measurements in the CMS detector at LHC

The “CMS Safety Closing Sensors System” (SCSS, or CSS for brevity) is a remote monitoring system design to control safety clearance and tight mechanical movements of parts of the CMS detector, especially during CMS assembly phases. We present the different systems that makes SCSS: its sensor technologies, the readout system, the data acquisition and control software. We also report on calibration and installation details, which determine the resolution and limits of the system. We present as well our experience from the operation of the system and the analysis of the data collected since 2008. Special emphasis is given to study positioning reproducibility during detector assembly and understanding how the magnetic fields influence the detector structure.

Questionário de satisfação do utente e do profissional : impacto num laboratório de análises clínicas

RESUMO: Temos assistido a uma evolução impressionante nos laboratórios de análises clínicas, os quais precisam de prestar um serviço de excelência a custos cada vez mais competitivos. Nos laboratórios os sistemas de gestão da qualidade têm uma importância significativa nesta evolução, fundamentalmente pela procura da melhoria continua, que ocorre não só ao nível de processos e técnicas, mas também na qualificação dos diferentes intervenientes. Um dos problemas fundamentais da gestão e um laboratório é a eliminação de desperdícios e erros criando benefícios, conceito base na filosofia LeanThinking isto é “pensamento magro”, pelo que é essencial conseguir monitorizar funções críticas sistematicamente. Esta monitorização, num laboratório cada vez mais focalizado no utente, pode ser efetuada através de sistemas e tecnologias de informação, sendo possível contabilizar número de utentes, horas de maior afluência, tempo médio de permanência na sala de espera, tempo médio para entrega de análises, resultados entregues fora da data prevista, entre outros dados de apoio à decisão. Devem igualmente ser analisadas as reclamações, bem como a satisfação dos utentes quer através do feedback que é transmitido aos funcionários, quer através de questionários de satisfação. Usou-se principalmente dois modelos: um proposto pelo Índice Europeu de Satisfação do Consumidor (ECSI) e o outro de Estrutura Comum de Avaliação (CAF). Introduziram-se igualmente dois questionários: um apresentado em formato digital num posto de colheitas, através de um quiosque eletrónico, e um outro na página da internet do laboratório, ambos como alternativa ao questionário em papel já existente, tendo-se analisado os dados, e retirado as devidas conclusões. Propôs-se e desenvolveu-se um questionário para colaboradores cuja intenção foi a de fornecer dados úteis de apoio à decisão, face à importância dos funcionários na interação com os clientes e na garantia da qualidade ao longo de todo o processo. Avaliaram-se globalmente os resultados sem que tenha sido possível apresentá-los por política interna da empresa, bem como se comentou de forma empírica alguns benefícios deste questionário. Os principais objetivos deste trabalho foram, implementar questionários de satisfação eletrónicos e analisar os resultados obtidos, comparando-os com o estudo ECSI, de forma a acentuar a importância da análise em simultâneo de dois fatores: a motivação profissional e a satisfação do cliente, com o intuito de melhorar os sistemas de apoio à decisão. ------------------------ ABSTRACT: We have witnessed an impressive development in clinical analysis laboratories, which have to provide excellent service at increasingly competitive costs, quality management systems have a significant importance in this evolution, mainly by demanding continuous improvement, which does not occur only in terms of processes and techniques, but also in the qualification of the various stakeholders. One key problem of managing a laboratory is the elimination of waste and errors, creating benefits, concept based on Lean Thinking philosophy, therefore it is essential be able to monitor critical tasks systematically. This monitoring, in an increasingly focused on the user laboratory can be accomplished through information systems and technologies, through which it is possible to account the number of clients, peak times, average length of waiting room stay, average time for delivery analysis, delivered results out of the expected date, among other data that contribute to support decisions, however it is also decisive to analyzed complaint sand satisfaction of users through employees feedback but mainly through satisfaction questionnaires that provides accurate results. We use mainly two models one proposed by the European Index of Consumer Satisfaction (ECSI), directed to the client, and the Common Assessment Framework (CAF), used both in the client as the employees surveys. Introduced two questionnaires in a digital format, one in the central laboratory collect center, through an electronic kiosk and another on the laboratory web page, both as an alternative to survey paper currently used, we analyzed the results, and withdrew the conclusions. It was proposed and developed a questionnaire for employees whose intention would be to provide useful data to decision support, given the importance of employees in customer interaction and quality assurance throughout the whole clinical process, it was evaluated in a general way because it was not possible to show the results, however commented an empirical way some benefits of this questionnaire. The main goals of this study were to implement electronic questionnaires and analyze the results, comparing them with the ECSI, in order to emphasize the importance of analyzing simultaneously professional motivation with customer satisfaction, in order to improve decision support systems.

Methodology for WSN communication technologies automated field tests

Wireless Sensor Networks(WSN) are networks of devices used to sense and act that applies wireless radios to communicate. To achieve a successful implementation of a wireless device it is necessary to take in consideration the existence of a wide variety of radios available, a large number of communication parameters (payload, duty cycle, etc.) and environmental conditions that may affect the device’s behaviour. However, to evaluate a specific radio towards a unique application it might be necessary to conduct trial experiments, with such a vast amount of devices, communication parameters and environmental conditions to take into consideration the number of trial cases generated can be surprisingly high. Thus, making trial experiments to achieve manual validation of wireless communication technologies becomes unsuitable due to the existence of a high number of trial cases on the field. To overcome this technological issue an automated test methodology was introduced, presenting the possibility to acquire data regarding the device’s behaviour when testing several technologies and parameters that care for a specific analysis. Therefore, this method advances the validation and analysis process of the wireless radios and allows the validation to be done without the need of specific and in depth knowledge about wireless devices.