Produção de espumas 3D porosas por auto-organização de nanofibras de policaprolactona

Dissertação para obtenção do Grau de Mestre em Engenharia Biomédica

Evaluation of chemotherapeutic potential of natural extracts using 3D models of colon cancer

Dissertation to obtain master degree in Biotechnology

The Evolution of Population Distribution on the Iberian Peninsula: A Transnational Approach (1877–2001)

Surpassing the national perspective usually adopted, the authors confirmed the existence of a pattern of population distribution common to the whole Iberian Peninsula in the long run. This pattern is clearly associated with geographical factors. These variables seem to have more weight in explaining changes between 1877/78 and 1940 than in the period from 1940 to 2001. The observation of the cross-border region has shown that proximity to the frontier has not generated any distinct pattern of population density on either side of the boundary line. The spatial coherence of the observed phenomena throughout the Peninsula and of its evolution, independent of the border between states, reinforces the importance of geographic factors in their explanation. At the same time, this verification opens up new issues related to the effect of national political and economic policies.

Débito de dose e qualidade da imagem em fluoroscopia

Dissertação para obtenção do Grau de Mestre em Engenharia Biomédica

Modelação 3D de teores de depósitos minerais condicionados por tipos de mineralização. O caso de estudo do depósito mineral do Zambujal, Minas de Neves-Corvo

Dissertação para obtenção do Grau de Mestre em Engenharia Geológica (Georrecursos)

Design of future distribution grids

Dissertação para obtenção do Grau de Mestre em Engenharia Electrotécnica e de Computadores

Simulações Monte Carlo da redução da dose no cristalino e na tiroide em exames de tomografia computorizada utilizando proteções de bismuto

A presente dissertação foi desenvolvida com colaboração do Campus Tecnológico e Nuclear e do Hospital de São José

Estruturas 3D porosas com gradiente de funcionalidade produzidas por Freeze-casting

Dissertação para obtenção do Grau de Mestre em Engenharia de Materiais

Optimization of breast tomosynthesis image reconstruction using parallel computing

Breast cancer is the most common cancer among women, being a major public health problem. Worldwide, X-ray mammography is the current gold-standard for medical imaging of breast cancer. However, it has associated some well-known limitations. The false-negative rates, up to 66% in symptomatic women, and the false-positive rates, up to 60%, are a continued source of concern and debate. These drawbacks prompt the development of other imaging techniques for breast cancer detection, in which Digital Breast Tomosynthesis (DBT) is included. DBT is a 3D radiographic technique that reduces the obscuring effect of tissue overlap and appears to address both issues of false-negative and false-positive rates. The 3D images in DBT are only achieved through image reconstruction methods. These methods play an important role in a clinical setting since there is a need to implement a reconstruction process that is both accurate and fast. This dissertation deals with the optimization of iterative algorithms, with parallel computing through an implementation on Graphics Processing Units (GPUs) to make the 3D reconstruction faster using Compute Unified Device Architecture (CUDA). Iterative algorithms have shown to produce the highest quality DBT images, but since they are computationally intensive, their clinical use is currently rejected. These algorithms have the potential to reduce patient dose in DBT scans. A method of integrating CUDA in Interactive Data Language (IDL) is proposed in order to accelerate the DBT image reconstructions. This method has never been attempted before for DBT. In this work the system matrix calculation, the most computationally expensive part of iterative algorithms, is accelerated. A speedup of 1.6 is achieved proving the fact that GPUs can accelerate the IDL implementation.

Amorphous silicon e 3D sensors applied to object detection

Nowadays, existing 3D scanning cameras and microscopes in the market use digital or discrete sensors, such as CCDs or CMOS for object detection applications. However, these combined systems are not fast enough for some application scenarios since they require large data processing resources and can be cumbersome. Thereby, there is a clear interest in exploring the possibilities and performances of analogue sensors such as arrays of position sensitive detectors with the final goal of integrating them in 3D scanning cameras or microscopes for object detection purposes. The work performed in this thesis deals with the implementation of prototype systems in order to explore the application of object detection using amorphous silicon position sensors of 32 and 128 lines which were produced in the clean room at CENIMAT-CEMOP. During the first phase of this work, the fabrication and the study of the static and dynamic specifications of the sensors as well as their conditioning in relation to the existing scientific and technological knowledge became a starting point. Subsequently, relevant data acquisition and suitable signal processing electronics were assembled. Various prototypes were developed for the 32 and 128 array PSD sensors. Appropriate optical solutions were integrated to work together with the constructed prototypes, allowing the required experiments to be carried out and allowing the achievement of the results presented in this thesis. All control, data acquisition and 3D rendering platform software was implemented for the existing systems. All these components were combined together to form several integrated systems for the 32 and 128 line PSD 3D sensors. The performance of the 32 PSD array sensor and system was evaluated for machine vision applications such as for example 3D object rendering as well as for microscopy applications such as for example micro object movement detection. Trials were also performed involving the 128 array PSD sensor systems. Sensor channel non-linearities of approximately 4 to 7% were obtained. Overall results obtained show the possibility of using a linear array of 32/128 1D line sensors based on the amorphous silicon technology to render 3D profiles of objects. The system and setup presented allows 3D rendering at high speeds and at high frame rates. The minimum detail or gap that can be detected by the sensor system is approximately 350 μm when using this current setup. It is also possible to render an object in 3D within a scanning angle range of 15º to 85º and identify its real height as a function of the scanning angle and the image displacement distance on the sensor. Simple and not so simple objects, such as a rubber and a plastic fork, can be rendered in 3D properly and accurately also at high resolution, using this sensor and system platform. The nip structure sensor system can detect primary and even derived colors of objects by a proper adjustment of the integration time of the system and by combining white, red, green and blue (RGB) light sources. A mean colorimetric error of 25.7 was obtained. It is also possible to detect the movement of micrometer objects using the 32 PSD sensor system. This kind of setup offers the possibility to detect if a micro object is moving, what are its dimensions and what is its position in two dimensions, even at high speeds. Results show a non-linearity of about 3% and a spatial resolution of < 2µm.

Predicting the impacts of climate change on the distribution and conservation of endemic forest land snails of Madeira Island

Climate change is emerging as one of the major threats to natural communities of the world’s ecosystems; and biodiversity hotspots, such as Madeira Island, might face a challenging future in the conservation of endangered land snails’ species. With this thesis, progresses have been made in order to properly understand the impact of climate on these vulnerable taxa; and species distribution models coupled with GIS and climate change scenarios have become crucial to understand the relations between species distribution and environmental conditions, identifying threats and determining biodiversity vulnerability. With the use of MaxEnt, important changes in the species suitable areas were obtained. Laurel forest species, highly dependent on precipitation and relative humidity, may face major losses on their future suitable areas, leading to the possible extinction of several endangered species, such as Leiostyla heterodon. Despite the complexity of the biological systems, the intrinsic uncertainty of species distribution models and the lack of information about land snails’ functional traits, this analysis contributed to a pioneer study on the impacts of climate change on endemic species of Madeira Island. The future inclusion of predictions of the effect of climate change on species distribution as part of IUCN assessments could contribute to species prioritizing, promoting specific management actions and maximizing conservation investment.

Disclosing the caffeine dose to be administered that restores insulin sensitivity in prediabetes animal

The results discussed in this thesis originated the following communications in International and National congresses: Sacramento JF, Coelho JC, Melo BF, Guarino MP and Conde SV. (2014) Assessment of caffeine dose and time of administration required for resetting insulin sensitivity in high sucrose diet in rats. 50th Meeting of EASD (European Association for the study of Diabetes), 14-19 September, Vienna, Austria Coelho JC, Melo BF, Sacramento JF, Guarino MP and Conde SV (2014). Establishing the caffeine dose that chronically restores insulin sensitivity in animal model of prediabetes. Fundação Astrazeneca Innovate Competition, iMed conference 6.0®, 10-12 October, Lisboa, Portugal Also, during the last year I was involved in other ongoing projects that originated the following communications: Coelho JC, Melo BF, Sacramento JF, Ribeiro MJ, Guarino MP and Conde SV (2014). Are the effects of carotid sinus nerve resection on insulin sensitivity mediated by an increase in Glut4 expression in skeletal muscle?. XLIV Reunião Anual da Sociedade Portuguesa de Farmacologia, XXXII Reunião de Farmacologia Clínica e XIII Reunião de Toxicologia, 5-7 February, Coimbra, Portugal Sacramento JF, Rodrigues T, Coelho JC, Matafome P, Ribeiro MJ, Seiça RM, Guarino MP, Conde SV (2014). Elucidating the mechanism by which carotid sinus nerve resection restores insulin sensitivity in pre-diabetes animal models. International Society for Arterial Chemoreception (ISAC) XIX University of Leeds, 29th June - 3rd July, Leeds, United Kingdom

Writing/erasing 3D micro and nano wrinkles in flexible elastomers for volatile organic compounds sensor

Micro/nano wrinkled patterns on cross-linked urethane/urea polymeric flexible free standing films with two soft segments, polypropylene oxide and polybutadiene, can be induced by UV-irradiation. The ability to write/erase these 3D structures, in a controlled manner, is the main focus of this work. The imprinting of the wrinkled structures was accomplished by swelling in an appropriate solvent followed by drying the membranes after the cross-linking process and UV irradiation. The surface tailoring of the elastomeric membranes was imaged by optical microscopy, scanning electronic microscopy and by atomic force microscopy. To erase the wrinkled structures the elastomers were swollen. The swelling as well as the sol/gel fraction and the UV radiation were tuned in order to control the wrinkles characteristics. It was found that the wrinkles wavelength, in the order of microns (1±0,25μm), was stamped by the UV radiation intensity and exposure time while the wrinkles' amplitude, in the order of nanometers (150-450 nm), was highly dependent on the swelling and sol/gel fraction. A prototype for volatile organic compounds detection was developed taking advantage of the unique 3D micro/nano wrinkles features.

How to optimize Lipton’s business model in order to stimulate tea consumption in Portugal and increase Lipton Leaf tea market share?: The importance of distribution and sales channels management in a B2B2C market

Field Lab Entrepreneurial Innovative Ventures

Desperdício de medicamentos em ambiente hospitalar : identificação dos pontos críticos no circuito, impacto no consumo de recursos e estratégias de controlo

RESUMO - Numa época de constrangimento orçamental, os hospitais do SNS vêm-se na obrigação de melhorar a eficiência de utilização dos recursos disponíveis, por forma a contribuir para o seu equilíbrio financeiro. Cabe a cada prestador analisar a sua posição, avaliar as suas oportunidades e adoptar estratégias que a curto, médio ou longo prazo se traduzam numa efetiva melhoria na eficiência. A análise e o controlo do desperdício associado à prestação de cuidados de saúde apresentam-se, globalmente, como uma dessas oportunidades. Neste trabalho são exploradas oportunidades de redução de desperdício em medicamentos, numa perspectiva meramente operacional, a nível das funções desempenhadas pelos Serviços Farmacêuticos (SF). No hospital em estudo acompanhou-se as diferentes linhas de produção dos SF, nomeadamente as tarefas envolvidas no processo de Distribuição Individual Diária em Dose Unitária, na distribuição de medicamentos para o Serviço de Urgências (SU) e na preparação de citotóxicos e imunomoduladores para o Hospital de Dia de Oncologia. Durante o ano de 2013, os SF devolveram aos fornecedores 0,07% e abateram 0,05% da despesa em medicamentos. A análise dos erros de medicação registados reflete o tipo de distribuição adotado para a maioria dos serviços de internamento do hospital. As melhorias encontradas a este nível passam pelo reforço de recursos humanos a desempenhar as tarefas de dispensa de medicamentos mas também pela implementação de uma cultura de registo de erros e acidentes, baseada no sistema de informação, para que se consiga quantificar o desperdício associado e agir com vista à optimização do circuito. A relação entre o método de distribuição adotado para o SU e a utilização do medicamento neste serviço foi apenas investigada para os medicamentos de registo individual de administração. Foi determinado um índice de eficiência de utilização de 67,7%, entre o dispensado e o administrado. Às discrepâncias encontradas está associado um custo de 32 229,6 € para o ano de 2013. Constatou-se também que, a nível do consumo de citotóxicos e imunomoduladores houve, durante o mês de abril de 2013, um índice de desperdício médio de 14,7%, entre o prescrito e o consumido, que se traduziu num custo do desperdício mensal de 13 070,9 €. Com base no desperdício mensal estimou-se que o desperdício anual associado à manipulação de citotóxicos e imunomoduladores deverá corresponder a 5,5% da despesa anual do serviço com estes medicamentos. Não obstante as limitações encontradas durantes o trabalho, e parte do desperdício apurado ser inevitável, demonstrou-se que o desperdício em medicamentos pode traduzir-se numa fatia não negligenciável mas controlável da despesa do hospital em estudo. No seguimento do seu conhecimento, a sua contenção pode ter um impacto na redução de despesa a curto-médio prazo, sem a necessidade de racionamento da utilização de medicamentos e sem alterar os padrões de qualidade assistencial exigidos pela tutela e pelos doentes. Por último, são apresentadas recomendações para a redução do desperdício em medicamentos, adequadas a cada uma das dimensões analisadas.