Une succession de référence pour le Toarcien Moyen et Supérieur: les "Margas calcárias de São Gião" dans les environs de Cantanhede (sous-bassin nord lusitanien, Portugal)*

The geological sections studied at the São Gião sector (Cantanhede region) have allowed the establishment of a clear succession of ammonite associations during the Middle and Upper Toarcian (“Margas calcárias de São Gião” and “Calcários margosos de Póvoa da Lomba” Formations). The fossil collections were gathered over the last 40 years and, in spite of the apparent facies monotony, come from a thick and fossiliferous marly-limestone unit. The ammonite succession allows the establishment and/or verification of a certain number of biostratigraphical elements, of which are worthy of mention: – the tethyan character of the fauna from the Gradata to the Meneghinii Zones; this differentiation starts with the occurrence of Collina, Crassiceras and Furloceras of the Gradata Zone; – the succession of Osperleioceras, with the connection between the “caussenardes”(O. reynesi, O. authelini) forms and those from Algeria (O. nadorense, O. matteii), which is placed at the beginning of the Aalensis Zone; – the succession of Hammatoceratinae: H. roubanense (Gradata Z.), H. bonarellii (Bonarellii Z.), H. speciosum (Speciosum Sub-zone), followed by Crestaites meneghinii (Reynesi Sub-zone and Meneghinii Z.); Pseudaptetoceras appear next (Aalensis Zone). The dynamic evolution of the sector is characterized by the persistence of marly sedimentation during the Meneghinii Zone, in probable relation to the paleostructural play of the Arunca-Montemor meridian axis.

Routine as deviation

We draw on evidence scattered across thick descriptions of organizations to outline an alternative model of routine. Instead of defining routine as a process of compliance with prescribed rules and procedures we define it as a process of deviation from the prescribed elements of organizations, resulting from the mutual constitution of repetitive work and improvisation. This view of routine underscores its adaptive nature and suggests that flexibility can be achieved not only by nimble and openly innovative organizations but also by large and organizations engaging in ‘closet’ innovation.

Gas tungsten arc welding of NiTi shape memory alloy

Shape memory alloys are characterized by the ability of recovering their initial shape after being deformed and by superelasticity. Since the discovery of these alloys, a new field of interest emerged not only for the scientific community but also to many industries. However, these alloys present poor machinability which constitute a constrain in the design of complex components for new applications. Thus, the demand for joining techniques able to join these alloys without compromising their properties became of great importance to enlarge the complexity of existing applications. Literature shows that these alloys are joined mainly using laser welding. In the present study, similar NiTi butt joints, were produced using TIG welding. The welds were performed in 1.5 mm thick plates across the rolling direction. A special fixture and gas assist device was designed and manufactured. Also a robot arm was adapted to accommodate the welding torch to assure the repeatability of the welding parameters. Welds were successfully achieved without macroscopic defects, such as pores and distortions. Very superficial oxidation was seen on the top surface due to insufficient shielding gas flow on the weld face. The welded joints were mechanically tested and structurally characterized. Testing methods were used to evaluate macro and microstructure, as well as the phase transformation temperatures, the mechanical single and cyclic behaviour and the shape recovery ability. Differential Scanning Calorimetry (DSC), Scanning Electron Microscopy (SEM), Energy Dispersive Spectroscopy (EDS), microhardness measurements were techniques also used to evaluate the welded joints. A depletion in Ni in the fusion zone was seen, as well as a shift in Ms temperature. For strain values of 4% the accumulated irrecoverable strain was of about 30% and increased with the strain imposed during cycling. Nevertheless, a complete recovery of initial shape was observed when testing the shape memory effect on a dedicated device that introduces a deformation of 6.7%. That is, the welding procedure does not remove the ability of the specimens to recover their initial shape.

Analysis and Treatment of a male portrait in oil and a study of the size layer with reconstructions from Vibert’s recipe (1892)

This thesis project concentrated on both the study and treatment of an early 20th century male portrait in oil from Colecção Caixa Geral de Depósitos, Lisbon, Portugal. The portrait of Januário Correia de Almeida, exhibits a tear (approximately 4.0 cm by 2.3 cm) associated with paint loss on the right upper side, where it is possible to observe an unusually thick size layer (approximately 50 microns) and an open weave mesh canvas. Size layers made from animal glue remain subject to severe dimensional changes due to changes in relative humidity (RH), thereby affecting the stability of the painting. In this case, the response to moisture of the size layer is minimal and the painting is largely uncracked with very little active flaking. This suggests that the size layer has undergone pre-treatment to render it unresponsive to moisture or water. Reconstructions based on late nineteenth century recipes using historically appropriate materials are used to explore various options for modifying the characteristics of gelatine, some of which may relate to the Portrait’s size layer. The thesis is separated into two parts: Part 1: Describes the history, condition, materials and techniques of the painting. It also details the treatment of Januário Correia de Almeida as well as the choices made and problems encountered during the treatment. Part 2: Discusses the history of commercial gelatine production, the choice of the appropriate animal source to extract the collagen to produce reconstructions of the portrait’s size layer as well as the characterization of selected reconstructions. The execution of a shallow textured infill led to one publication and one presentation: Abstract accepted for presentation and publication, International Meeting on Retouching of Cultural Heritage (RECH3), Francisco Brites, Leslie Carlyle and Raquel Marques, ‘’Hand building a Low Profile Textured Fill for a Large Loss’’.

Architecture and mosaics in recently discovered Palaeochristian basilicas

The excavations of the Dericik Early Christian Basilicas revealed the importance of the surrounding area of Bursa for understanding Early Christianity between the Late Roman and Early Byzantine periods. In the salvage excavations of 2001, the basic plan of the basilica (nave, narthex, presbyterium and apse) was revealed. The most important artefacts uncovered in that year were the mosaic pavements with geometric and plant ornaments and a grave located in the North Eastern corner of the church. The mosaic of the basilica was laid with the opus tessellatum technique on a thick mortar foundation with white, red, yellow, olive green and dark blue tesserae. A refrigerium scene is represented in the middle of the narthex mosaic. The mosaic in the centre of the nave is divided into parts, one of which with figures of birds inside octagons. In the transitional area between the nave and apse, three heavily damaged inscriptions have been conserved each of three or four lines, one of them indicating the wish of Epituchanos, diakôn, a church member.