Probabilistic models for mechanical properties of prestressing strands

This study focus on the probabilistic modelling of mechanical properties of prestressing strands based on data collected from tensile tests carried out in Laboratório Nacional de Engenharia Civil (LNEC), Portugal, for certification purposes, and covers a period of about 9 years of production. The strands studied were produced by six manufacturers from four countries, namely Portugal, Spain, Italy and Thailand. Variability of the most important mechanicalproperties is examined and the results are compared with the recommendations of the ProbabilisticModel Code, as well as the Eurocodes and earlier studies. The obtained results show a very low variability which, of course, benefits structural safety. Based on those results, probabilistic modelsfor the most important mechanical properties of prestressing strands are proposed.

Correlation between the mechanical cycling behavior and microstructure in laser welded joints using NiTi memory shape alloys

Dissertação para obtenção do Grau de Mestre em Engenharia de Materiais

Production of aluminium based composites reinforced with embedded NiTi by friction stir welding

Dissertação para a obtenção do grau de Mestre em Engenharia Mecânica

Understanding the internet banking adoption by Portuguese customers - a unified theory of acceptance and use of technology and perceived risk application.

Trabalho de Projeto apresentado como requisito parcial para obtenção do grau de Mestre em Estatística e Gestão de Informação

Men’s purchase intention of shampoo: a model based on the theory of planned behavior and self-concept

A Work Project, presented as part of the requirements for the Award of a Masters Degree in Management from the NOVA – School of Business and Economics

Old cellulose for new multifunctional networks

Dissertação para obtenção do Grau de Doutor em Ciência e Engenharia de Materiais

Osmo- and thermo-adaptation in hyperthermophilic Archaea: identification of compatible solutes accumulation profiles, and biosynthetic routes in Archaeoglobus spp.

Dissertation presented to obtain the Ph.D degree in Biochemistry

Influence of curing conditions in lime-metakaolin blended mortars – A mineralogical and mechanical study

3rd Historic Mortars Conference, 11-14 September 2013, Glasgow, Scotland

Mechanical and mineralogical properties of natural hydraulic lime-metakaolin mortars in different curing conditions

Construction and Building Materials 51 (2014) 287–294

Three essays on game theory and bargaining

A PhD Dissertation, presented as part of the requirements for the Degree of Doctor of Philosophy from the NOVA - School of Business and Economics

Lime mortars with ceramic wastes: characterization of components and their influence on the mechanical behaviour

Considering the fundamental importance of preserving the built heritage and of ensuring the good performance achieved by incorporating ceramic particles in lime mortars in ancient times, it is important to study solutions that use materials the available today, in order to produce mortars intended to repair and replace the old ones. Solutions incorporating industrial ceramic waste might be profitable for several reasons, namely for economic, environmental and technical aspects. In this paper, seven ceramic waste products collected from ceramics factories are characterized. Their mineralogy, dimensional features and pozzolanicity were determined. Three of these products, with different particle size fractions (obtained directly from milling, dust only and fragment fractions only), were selected, incorporated into air lime mortars, and their mechanical strength was determined. In the present work, evidence of mechanical efficiency, when common sand or air lime were partially replaced by ceramic wastes, was made clear, drawing attention to the sustainability of this type of mortars, hence, encouraging further research.

Predictive analytical and numerical modeling for orthogonal cutting

In this thesis, a predictive analytical and numerical modeling approach for the orthogonal cutting process is proposed to calculate temperature distributions and subsequently, forces and stress distributions. The models proposed include a constitutive model for the material being cut based on the work of Weber, a model for the shear plane based on Merchants model, a model describing the contribution of friction based on Zorev’s approach, a model for the effect of wear on the tool based on the work of Waldorf, and a thermal model based on the works of Komanduri and Hou, with a fraction heat partition for a non-uniform distribution of the heat in the interfaces, but extended to encompass a set of contributions to the global temperature rise of chip, tool and work piece. The models proposed in this work, try to avoid from experimental based values or expressions, and simplifying assumptions or suppositions, as much as possible. On a thermo-physical point of view, the results were affected not only by the mechanical or cutting parameters chosen, but also by their coupling effects, instead of the simplifying way of modeling which is to contemplate only the direct effect of the variation of a parameter. The implementation of these models was performed using the MATLAB environment. Since it was possible to find in the literature all the parameters for AISI 1045 and AISI O2, these materials were used to run the simulations in order to avoid arbitrary assumption.

Spiteful Strategies. The ontogeny and the practice of spite in human interaction: an experimental game theory approach and empirical applications

As estratégias de malevolência implicam que um indivíduo pague um custo para infligir um custo superior a um oponente. Como um dos comportamentos fundamentais da sociobiologia, a malevolência tem recebido menos atenção que os seus pares o egoísmo e a cooperação. Contudo, foi estabelecido que a malevolência é uma estratégia viável em populações pequenas quando usada contra indivíduos negativamente geneticamente relacionados pois este comportamento pode i) ser eliminado naturalmente, ou ii) manter-se em equilíbrio com estratégias cooperativas devido à disponibilidade da parte de indivíduos malevolentes de pagar um custo para punir. Esta tese propõe compreender se a propensão para a malevolência nos humanos é inerente ou se esta se desenvolve com a idade. Para esse efeito, considerei duas experiências de teoria de jogos em crianças em ambiente escolar com idades entre os 6 e os 22 anos. A primeira, um jogo 2x2 foi testada com duas variantes: 1) um prémio foi atribuído a ambos os jogadores, proporcionalmente aos pontos acumulados; 2), um prémio foi atribuído ao jogador com mais pontos. O jogo foi desenhado com o intuito de causar o seguinte dilema a cada jogador: i) maximizar o seu ganho e arriscar ter menos pontos que o adversário; ou ii) decidir não maximizar o seu ganho, garantindo que este não era inferior ao do seu adversário. A segunda experiência consistia num jogo do ditador com duas opções: uma escolha egoísta/altruísta (A), onde o ditador recebia mais ganho, mas o seu recipiente recebia mais que ele e uma escolha malevolente (B) que oferecia menos ganhos ao ditador que a A mas mais ganhos que o recipiente. O dilema era que se as crianças se comportassem de maneira egoísta, obtinham mais ganho para si, ao mesmo tempo que aumentavam o ganho do seu colega. Se fossem malevolentes, então prefeririam ter mais ganho que o seu colega ao mesmo tempo que tinham menos para eles próprios. As experiências foram efetuadas em escolas de duas áreas distintas de Portugal (continente e Açores) para perceber se as preferências malevolentes aumentavam ou diminuíam com a idade. Os resultados na primeira experiência sugerem que (1) os alunos compreenderam a primeira variante como um jogo de coordenação e comportaram-se como maximizadores, copiando as jogadas anteriores dos seus adversários; (2) que os alunos repetentes se comportaram preferencialmente como malevolentes, mais frequentemente que como maximizadores, com especial ênfase para os alunos de 14 anos; (3) maioria dos alunos comportou-se reciprocamente desde os 12 até aos 16 anos de idade, após os quais começaram a desenvolver uma maior tolerância às escolhas dos seus parceiros. Os resultados da segunda experiência sugerem que (1) as estratégias egoístas eram prevalentes até aos 6 anos de idade, (2) as tendências altruístas emergiram até aos 8 anos de idade e (3) as estratégias de malevolência começaram a emergir a partir dos 8 anos de idade. Estes resultados complementam a literatura relativamente escassa sobre malevolência e sugerem que este comportamento está intimamente ligado a preferências de consideração sobre os outros, o paroquialismo e os estágios de desenvolvimento das crianças.************************************************************Spite is defined as an act that causes loss of payoff to an opponent at a cost to the actor. As one of the four fundamental behaviours in sociobiology, it has received far less attention than its counterparts selfishness and cooperation. It has however been established as a viable strategy in small populations when used against negatively related individuals. Because of this, spite can either i) disappear or ii) remain at equilibrium with cooperative strategies due to the willingness of spiteful individuals to pay a cost in order to punish. This thesis sets out to understand whether propensity for spiteful behaviour is inherent or if it develops with age. For that effect, two game-theoretical experiments were performed with schoolboys and schoolgirls aged 6 to 22. The first, a 2 x 2 game, was tested in two variants: 1) a prize was awarded to both players, proportional to accumulated points; 2), a prize was given to the player with most points. Each player faced the following dilemma: i) to maximise pay-off risking a lower pay-off than the opponent; or ii) not to maximise pay-off in order to cut down the opponent below their own. The second game was a dictator experiment with two choices, (A) a selfish/altruistic choice affording more payoff to the donor than B, but more to the recipient than to the donor, and (B) a spiteful choice that afforded less payoff to the donor than A, but even lower payoff to the recipient. The dilemma here was that if subjects behaved selfishly, they obtained more payoff for themselves, while at the same time increasing their opponent payoff. If they were spiteful, they would rather have more payoff than their colleague, at the cost of less for themselves. Experiments were run in schools in two different areas in Portugal (mainland and Azores) to understand whether spiteful preferences varied with age. Results in the first experiment suggested that (1) students understood the first variant as a coordination game and engaged in maximising behaviour by copying their opponent’s plays; (2) repeating students preferentially engaged in spiteful behaviour more often than maximising behaviour, with special emphasis on 14 year-olds; (3) most students engaged in reciprocal behaviour from ages 12 to 16, as they began developing higher tolerance for their opponent choices. Results for the second experiment suggested that (1) selfish strategies were prevalent until the age of 6, (2) altruistic tendencies emerged since then, and (3) spiteful strategies began being chosen more often by 8 year-olds. These results add to the relatively scarce body of literature on spite and suggest that this type of behaviour is closely tied with other-regarding preferences, parochialism and the children’s stages of development.

Mechanical characterization of aortas using 2D ultrasound elastography

Rupture of aortic aneurysms (AA) is a major cause of death in the Western world. Currently, clinical decision upon surgical intervention is based on the diameter of the aneurysm. However, this method is not fully adequate. Noninvasive assessment of the elastic properties of the arterial wall can be a better predictor for AA growth and rupture risk. The purpose of this study is to estimate mechanical properties of the aortic wall using in vitro inflation testing and 2D ultrasound (US) elastography, and investigate the performance of the proposed methodology for physiological conditions. Two different inflation experiments were performed on twelve porcine aortas: 1) a static experiment for a large pressure range (0 – 140 mmHg); 2) a dynamic experiment closely mimicking the in vivo hemodynamics at physiological pressures (70 – 130 mmHg). 2D raw radiofrequency (RF) US datasets were acquired for one longitudinal and two cross-sectional imaging planes, for both experiments. The RF-data were manually segmented and a 2D vessel wall displacement tracking algorithm was applied to obtain the aortic diameter–time behavior. The shear modulus G was estimated assuming a Neo-Hookean material model. In addition, an incremental study based on the static data was performed to: 1) investigate the changes in G for increasing mean arterial pressure (MAP), for a certain pressure difference (30, 40, 50 and 60 mmHg); 2) compare the results with those from the dynamic experiment, for the same pressure range. The resulting shear modulus G was 94 ± 16 kPa for the static experiment, which is in agreement with literature. A linear dependency on MAP was found for G, yet the effect of the pressure difference was negligible. The dynamic data revealed a G of 250 ± 20 kPa. For the same pressure range, the incremental shear modulus (Ginc) was 240 ± 39 kPa, which is in agreement with the former. In general, for all experiments, no significant differences in the values of G were found between different image planes. This study shows that 2D US elastography of aortas during inflation testing is feasible under controlled and physiological circumstances. In future studies, the in vivo, dynamic experiment should be repeated for a range of MAPs and pathological vessels should be examined. Furthermore, the use of more complex material models needs to be considered to describe the non-linear behavior of the vascular tissue.

Influence of the molecular weight in mechanical properties and degradation kinetics of chitosan inverted colloidal crystals

Tissue engineering arises from the need to regenerate organs and tissues, requiring the development of scaffolds, which can provide an optimum environment for tissue growth. In this work, chitosan with different molecular weights was used to develop biodegradable 3D inverted colloidal crystals (ICC) structures for bone regeneration, exhibiting uniform pore size and interconnected network. Moreover, in vitro tests were conducted by studying the influence of the molecular weight in the degradation kinetics and mechanical properties. The production of ICC included four major stages: fabrication of microspheres; assembly into a cohesive structure, polymeric solution infiltration and microsphere removal. Chitosan’s degree of deacetylation was determined by infrared spectroscopy and molecular weight was obtained via capillary viscometry. In order to understand the effect of the molecular weight in ICC structures, the mass loss and mechanical properties were analyzed after degradation with lysozyme. Structure morphology observation before and after degradation was performed by scanning electron microscopy. Cellular adhesion and proliferation tests were carried out to evaluate ICC in vitro response. Overall, medium molecular weight ICC revealed the best balance in terms of mechanical properties, degradation rate, morphology and biological behaviour.