Interactive spatial decision support for sustainable agroforestry management: a case study in East Kalimantan, Indonesia

Forest managers, stakeholders and investors want to be able to evaluate economic, environmental and social benefits in order to improve the outcomes of their decisions and enhance sustainable forest management. This research developed a spatial decision support system that provides: (1) an approach to identify the most beneficial locations for agroforestry projects based on the biophysical properties and evaluate its economic, social and environmental impact; (2) a tool to inform prospective investors and stakeholders of the potential and opportunities for integrated agroforestry management; (3) a simulation environment that enables evaluation via a dashboard with the opportunity to perform interactive sensitivity analysis for key parameters of the project; (4) a 3D interactive geographic visualization of the economic, environmental and social outcomes, which facilitate understanding and eases planning. Although the tool and methodology presented are generic, a case study was performed in East Kalimantan, Indonesia. For the whole study area, it was simulated the most suitable location for three different plantation schemes: monoculture of timber, a specific recipe (cassava, banana and sugar palm) and different recipes per geographic unit. The results indicate that a mixed cropping plantation scheme, with different recipes applied to the most suitable location returns higher economic, environmental and social benefits.

Hygrothermal behaviour of earthen plasters for sustainable housing construction

A ready-mixed and several laboratory formulated mortars were produced and tested in fresh state and after hardening, simulating a masonry plaster for indoor application. All the mortars used a clayish earth from the same region and different compositions of aggregates, eventually including fibres and a phase change material. All the formulated mortars were composed by 1:3 volumetric proportions of earth and aggregate. Tests were developed for consistency, fresh bulk density, thermal conductivity, capillary absorption and drying, water vapour permeability and sorption-desorption. The use of PCM changed drastically the workability of the mortars and increased their capillary absorption. The use of fibres and variations on particle size distribution of the mixtures of sand that were used had no significant influence on tested properties. But particularly the good workability of these mortars and the high capacity of sorption and desorption was highlighted. With this capacity plasters made with these mortars are able to adsorb water vapour from indoor atmosphere when high levels of relative humidity exist and release water vapour when the indoor atmosphere became too dry. This fact makes them able to contribute passively for a healthier indoor environment. The technical, ecological and environmental advantages of the application of plasters with this type of mortars are emphasized, with the aim of contributing for an increased use for new or existent housing.

Experimental and modeling studies on reverse electrodialysis for sustainable power generation

A potentially renewable and sustainable source of energy is the chemical energy associated with solvation of salts. Mixing of two aqueous streams with different saline concentrations is spontaneous and releases energy. The global theoretically obtainable power from salinity gradient energy due to World’s rivers discharge into the oceans has been estimated to be within the range of 1.4-2.6 TW. Reverse electrodialysis (RED) is one of the emerging, membrane-based, technologies for harvesting the salinity gradient energy. A common RED stack is composed by alternately-arranged cation- and anion-exchange membranes, stacked between two electrodes. The compartments between the membranes are alternately fed with concentrated (e.g., sea water) and dilute (e.g., river water) saline solutions. Migration of the respective counter-ions through the membranes leads to ionic current between the electrodes, where an appropriate redox pair converts the chemical salinity gradient energy into electrical energy. Given the importance of the need for new sources of energy for power generation, the present study aims at better understanding and solving current challenges, associated with the RED stack design, fluid dynamics, ionic mass transfer and long-term RED stack performance with natural saline solutions as feedwaters. Chronopotentiometry was used to determinate diffusion boundary layer (DBL) thickness from diffusion relaxation data and the flow entrance effects on mass transfer were found to avail a power generation increase in RED stacks. Increasing the linear flow velocity also leads to a decrease of DBL thickness but on the cost of a higher pressure drop. Pressure drop inside RED stacks was successfully simulated by the developed mathematical model, in which contribution of several pressure drops, that until now have not been considered, was included. The effect of each pressure drop on the RED stack performance was identified and rationalized and guidelines for planning and/or optimization of RED stacks were derived. The design of new profiled membranes, with a chevron corrugation structure, was proposed using computational fluid dynamics (CFD) modeling. The performance of the suggested corrugation geometry was compared with the already existing ones, as well as with the use of conductive and non-conductive spacers. According to the estimations, use of chevron structures grants the highest net power density values, at the best compromise between the mass transfer coefficient and the pressure drop values. Finally, long-term experiments with natural waters were performed, during which fouling was experienced. For the first time, 2D fluorescence spectroscopy was used to monitor RED stack performance, with a dedicated focus on following fouling on ion-exchange membrane surfaces. To extract relevant information from fluorescence spectra, parallel factor analysis (PARAFAC) was performed. Moreover, the information obtained was then used to predict net power density, stack electric resistance and pressure drop by multivariate statistical models based on projection to latent structures (PLS) modeling. The use in such models of 2D fluorescence data, containing hidden, but extractable by PARAFAC, information about fouling on membrane surfaces, considerably improved the models fitting to the experimental data.

Key performance indicators and the balanced scorecard at the Luxury Brand Hotels of Pestana Group

Traditional approaches to evaluate performance in hotels, have mainly used financial measures. Building on Speckbacher et al. (2003), this Work Project aims to design and propose a Balanced Scorecard Type II as a performance measurement/management system for the hospitality industry based on data collected at the Luxury Brand Hotels of Pestana Group. The main contribution is to better align the vision, strategy and financial and non-financial performance measures in this category of hotels, in particular those of Pestana Group, and by doing so, lead their managers to focus on what is really critical and, consequently improve the overall performance.

Improving building technologies with a sustainable strategy

In recent years it has been noticed the progressive disappearance of vernacular sustainable building technologies all over the world mainly due to a strong urban rehabilitation process with modern technologies not compatible with ancient knowledge. Simultaneously new dwellings are needed all over the world and in this sense it was decided to study an ecological and cost-controlled building technology of monolithic walls that can combine the use of low carbon footprint materials, such as earth, fibres and lime using an invasive species: giant reed cane (Arundo Donax). This paper explains the development of this building technology through testing diverse prototypes.

Avaliação económica em transplantação renal : abordagem estratégica do processo de doação e análise de custo-utilidade do programa de transplantação renal versus hemodiálise

SUMÁRIO - O desafio atual da Saúde Pública é assegurar a sustentabilidade financeira do sistema de saúde. Em ambiente de recursos escassos, as análises económicas aplicadas à prestação dos cuidados de saúde são um contributo para a tomada de decisão que visa a maximização do bem-estar social sujeita a restrição orçamental. Portugal é um país com 10,6 milhões de habitantes (2011) com uma incidência e prevalência elevadas de doença renal crónica estadio 5 (DRC5), respetivamente, 234 doentes por milhão de habitantes (pmh) e 1.600 doentes/pmh. O crescimento de doenças associadas às causas de DRC, nomeadamente, diabetes Mellitus e hipertensão arterial, antecipam uma tendência para o aumento do número de doentes. Em 2011, dos 17.553 doentes em tratamento substitutivo renal, 59% encontrava-se em programa de hemodiálise (Hd) em centros de diálise extra-hospitalares, 37% viviam com um enxerto renal funcionante e 4% estavam em diálise peritoneal (SPN, 2011). A lista ativa para transplante (Tx) renal registava 2.500 doentes (SPN 2009). O Tx renal é a melhor modalidade terapêutica pela melhoria da sobrevida, qualidade de vida e relação custo-efetividade, mas a elegibilidade para Tx e a oferta de órgãos condicionam esta opção. Esta investigação desenvolveu-se em duas vertentes: i) determinar o rácio custo-utilidade incremental do Tx renal comparado com a Hd; ii) avaliar a capacidade máxima de dadores de cadáver em Portugal, as características e as causas de morte dos dadores potenciais a nível nacional, por hospital e por Gabinete Coordenador de Colheita e Transplantação (GCCT), e analisar o desempenho da rede de colheita de órgãos para Tx. Realizou-se um estudo observacional/não interventivo, prospetivo e analítico que incidiu sobre uma coorte de doentes em Hd que foi submetida a Tx renal. O tempo de seguimento mínimo foi de um ano e máximo de três anos. No início do estudo, colheram-se dados sociodemográficos e clínicos em 386 doentes em Hd, elegíveis para Tx renal. A qualidade de vida relacionada com a saúde (QVRS) foi avaliada nos doentes em Hd (tempo 0) e nos transplantados, aos três, seis, 12 meses, e depois, anualmente. Incluíram-se os doentes que por falência do enxerto renal transitaram para Hd. Na sua medição, utilizou-se um instrumento baseado em preferências da população, o EuroQol-5D, que permite o posterior cálculo dos QALY. Num grupo de 82 doentes, a QVRS em Hd foi avaliada em dois tempos de resposta o que permitiu a análise da sua evolução. Realizou-se uma análise custo-utilidade do Tx renal comparado com a Hd na perspetiva da sociedade. Identificaram-se os custos diretos, médicos e não médicos, e as alterações de produtividade em Hd e Tx renal. Incluíram-se os custos da colheita de órgãos, seleção dos candidatos a Tx renal e follow-up dos dadores vivos. Cada doente transplantado foi utilizado como controle de si próprio em diálise. Avaliou-se o custo médio anual em programa de Hd crónica relativo ao ano anterior à Tx renal. Os custos do Tx foram avaliados prospetivamente. Considerou-se como horizonte temporal o ciclo de vida nas duas modalidades. Usaram-se taxas de atualização de 0%, 3% e 5% na atualização dos custos e QALY e efetuaram-se análises de sensibilidade one way. Entre 2008 e 2010, 65 doentes foram submetidos a Tx renal. Registaram-se, prospetivamente, os resultados em saúde incluíndo os internamentos e os efeitos adversos da imunossupressão, e o consumo dos recursos em saúde. Utilizaram-se modelos de medidas repetidas na avaliação da evolução da QVRS e modelos de regressão múltipla na análise da associação da QVRS e dos custos do transplante com as características basais dos doentes e os eventos clínicos. Comparativamente à Hd, observou-se melhoria da utilidade ao 3º mês de Tx e a qualidade de vida aferida pela escala EQ-VAS melhorou em todos os tempos de observação após o Tx renal. O custo médio da Hd foi de 32.567,57€, considerado uniforme ao longo do tempo. O custo médio do Tx renal foi de 60.210,09€ no 1º ano e 12.956,77€ nos anos seguintes. O rácio custo-utilidade do Tx renal vs Hd crónica foi de 2.004,75€/QALY. A partir de uma sobrevivência do enxerto de dois anos e cinco meses, o Tx associou-se a poupança dos custos. Utilizaram-se os dados nacionais dos Grupos de Diagnóstico Homogéneos e realizou-se um estudo retrospectivo que abrangeu as mortes ocorridas em 34 hospitais com colheita de órgãos, em 2006. Considerou-se como dador potencial o indivíduo com idade entre 1-70 anos cuja morte ocorrera a nível hospitalar, e que apresentasse critérios de adequação à doação de rim. Analisou-se a associação dos dadores potenciais com características populacionais e hospitalares. O desempenho das organizações de colheita de órgãos foi avaliado pela taxa de conversão (rácio entre os dadores potenciais e efetivos) e pelo número de dadores potenciais por milhão de habitantes a nível nacional, regional e por Gabinete Coordenador de Colheita e Transplantação (GCCT). Identificaram-se 3.838 dadores potenciais dos quais 608 apresentaram códigos da Classificação Internacional de Doenças, 9.ª Revisão, Modificações Clínicas (CID- 9-MC) que, com maior frequência, evoluem para a morte cerebral. O modelo logit para dados agrupados identificou a idade, o rácio da lotação em Unidades de Cuidados Intensivos e lotação de agudos, existência de GCCT e de Unidade de Transplantação, e mortalidade por acidente de trabalho como fatores preditivos da conversão dum dador potencial em efetivo e através das estimativas do modelo logit quantificou-se a probabilidade dessa conversão. A doação de órgãos deve ser assumida como uma prioridade e as autoridades em saúde devem assegurar o financiamento dos hospitais com programas de doação, evitando o desperdício de órgãos para transplantação, enquanto um bem público e escasso. A colheita de órgãos deve ser considerada uma opção estratégica da atividade hospitalar orientada para a organização e planeamento de serviços que maximizem a conversão de dadores potenciais em efetivos incluindo esse critério como medida de qualidade e efetividade do desempenho hospitalar. Os resultados deste estudo demonstram que: 1) o Tx renal proporciona ganhos em saúde, aumento da sobrevida e qualidade de vida, e poupança de custos; 2) em Portugal, a taxa máxima de eficácia da conversão dos dadores cadavéricos em dadores potenciais está longe de ser atingida. O investimento na rede de colheita de órgãos para Tx é essencial para assegurar a sustentabilidade financeira e promover a qualidade, eficiência e equidade dos cuidados em saúde prestados na DRC5.

Decisions of technology innovation: the role of indicators

This work presents research conducted to understand the role of indicators in decisions of technology innovation. A gap was detected in the literature of innovation and technology assessment about the use and influence of indicators in this type of decision. It was important to address this gap because indicators are often frequent elements of innovation and technology assessment studies. The research was designed to determine the extent of the use and influence of indicators in decisions of technology innovation, to characterize the role of indicators in these decisions, and to understand how indicators are used in these decisions. The latter involved the test of four possible explanatory factors: the type and phase of decision, and the context and process of construction of evidence. Furthermore, it focused on three Portuguese innovation groups: public researchers, business R&D&I leaders and policymakers. The research used a combination of methods to collect quantitative and qualitative information, such as surveys, case studies and social network analysis. This research concluded that the use of indicators is different from their influence in decisions of technology innovation. In fact, there is a high use of indicators in these decisions, but lower and differentiated differences in their influence in each innovation group. This suggests that political-behavioural methods are also involved in the decisions to different degrees. The main social influences in the decisions came mostly from hierarchies, knowledge-based contacts and users. Furthermore, the research established that indicators played mostly symbolic roles in decisions of policymakers and business R&D&I leaders, although their role with researchers was more differentiated. Indicators were also described as helpful instruments to conduct a reasonable interpretation of data and to balance options in innovation and technology assessments studies, in particular when contextualised, described in detail and with discussion upon the options made. Results suggest that there are four main explanatory factors for the role of indicators in these decisions: First, the type of decision appears to be a factor to consider when explaining the role of indicators. In fact, each type of decision had different influences on the way indicators are used, and each type of decision used different types of indicators. Results for policy-making were particularly different from decisions of acquisition and development of products/technology. Second, the phase of the decision can help to understand the role indicators play in these decisions. Results distinguished between two phases detected in all decisions – before and after the decision – as well as two other phases that can be used to complement the decision process and where indicators can be involved. Third, the context of decision is an important factor to consider when explaining the way indicators are taken into consideration in policy decisions. In fact, the role of indicators can be influenced by the particular context of the decision maker, in which all types of evidence can be selected or downplayed. More importantly, the use of persuasive analytical evidence appears to be related with the dispute existent in the policy context. Fourth and last, the process of construction of evidence is a factor to consider when explaining the way indicators are involved in these decisions. In fact, indicators and other evidence were brought to the decision processes according to their availability and capacity to support the different arguments and interests of the actors and stakeholders. In one case, an indicator lost much persuasion strength with the controversies that it went through during the decision process. Therefore, it can be argued that the use of indicators is high but not very influential; their role is mostly symbolic to policymakers and business decisions, but varies among researchers. The role of indicators in these decisions depends on the type and phase of the decision and the context and process of construction of evidence. The latter two are related to the particular context of each decision maker, the existence of elements of dispute and controversies that influence the way indicators are introduced in the decision-making process.