UsaGame – A new methodology to support user- centered design of touchscreen game applications

Dissertação para Obtenção do Grau de Mestre em Engenharia e Gestão Industrial

Lightweight robust behavior industrial agent methodology

Dissertação para obtenção do Grau de Mestre em Engenharia Electrotécnica e de Computadores

Rastreio combinado do 1º trimestre e doenças autoimunes : Impacto das variaveis pré-analíticas na avaliação do risco

RESUMO: Contexto: As anomalias congénitas, com particular destaque para as neuploidias , afectam aproximadamente 2% dos recém-nascidos, constituindo causas frequentes de morbilidade e mortalidade. Actualmente, a avaliação do grau de risco para as aneuploidias mais prevalentes (T21, T13, T18) é efectuada através do “Rastreio Combinado do 1º Trimestre”, devendo as grávidas com risco acrescido ser sujeitas a exames invasivos (ex.biópsia das vilosidades coriónicas,amniocentese). Quanto mais qualidade existir num rastreio, menos falsos positivos existirão e menor o número de exames diagnósticos invasivos desnecessários. As doenças autoimunes são doenças inflamatórias crónicas em cuja fisiopatologia se encontram distúrbios da imunidade humoral e celular, dependentes de factores genéticos, hormonais,psicológicos e ambientais. Atingem mais o sexo feminino e durante a idade fértil,podendo influenciar o outcome da gravidez e a saúde neonatal causando significativa morbilidade e mortalidade. O lúpus eritematoso sistémico para além de potencialmente afectado pelas alterações imunoendócrinas fisiológicas da gravidez, associa-se frequentemente a problemas de fertilidade. Recentemente, foi sugerido que as anormalidades ocorridas durante a invasão precoce do sinciciotrofoblasto, resultando em deficiente diferenciação, deficiente maturação e diminuição na produção de hCG, poderão ser o mecanismo fisiopatológico primário para as perdas fetais no primeiro trimestre, nos doentes com SLE. A ocorrência de níveis elevados de hCG total e ß-hCG livre no rastreio para despiste de síndrome de Down do segundo e do primeiro trimestre foi assinalada em grávidas portadoras de lúpus, mas a escassez de estudos comprovativos e a pequena dimensão das amostras estudadas constituiu uma limitação significativa na fidedignidade dos resultados obtidos. Objectivos: O estudo teve como objectivos i. estabelecer valores normativos Portugueses e de distribuição para as MoM’s dos parâmetros séricos do primeiro trimestre, por semana de gestação:(PAPP-A e ß-hCG livre), ii. avaliar a influência que as doenças autoimunes têm sobre as MoM’s individuais dos parâmetros bioquímicos PAPP-A e/ou ß-hCG livre, utilizados no rastreio pré-natal combinado do 1º trimestre, e iii. saber se as doenças autoimunes podem condicionar um aumento da taxa de resultados falsos positivos, com consequente aumento do número de amniocenteses. Metodologia: Estudo longitudinal prospectivo, consistindo num rastreio pré-natal combinado de 1º trimestre para pesquisa de aneuploidias, em duas amostras provenientes do Reino Unido (n= 45,854) e de Portugal (n=3122). Foram avaliados parâmetros socio-demográficos, ecográficos, laboratoriais, e calculados os indicadores de desempenho do rastreio combinado. A execução analítica dos testes bioquímicos séricos (PAPP-A e ß-hCG livre) foi realizada no autoanalisador Brahms Kryptor e no autoanalizador 6000 Delfia Xpress. Compararam-se os grupos autoimune e não autoimune das amostras. Resultados: Relativamente às características populacionais, o grupo auto imune tinha valores significativamente superiores nas variáveis idade materna e idade gestacional. Comparando os grupos com e sem doença autoimune, constatou-se a existência de uma elevação das MoM’s da ß-hCG livre nas grávidas com doença autoimune, nomeadamente nos casos de lúpus eritematoso sistémico. Conclusões: os resultado obtidos reforçam a indicação do rastreio combinado do 1º trimestre certificado pela FMF nas grávidas com doenças autoimunes, nomeadamente para as doentes com LES; no entanto, devem ser calculados e introduzidos factores de correcção no algoritmo de risco, de modo a evitar a subida no número de resultados falso-positivos, e consequentemente a sobre- utilização de métodos invasivos.------------ ABSTRACT: Context: Congenital anomalies, with particular reference to aneuploidias, affect approximately 2% of newborns, and are frequent causes of morbidity and mortality. Currently, the risk evaluation for the most prevalent aneuploidias (T21, T13, T18) is carried out through the “combined first trimester screening”, and pregnant women with increased risk are subjected to invasive tests (e.g. villus biopsy done, amniocentesis). The more quality exists in a screening, less false positives exists and fewer unnecessary invasive diagnostic exams. Autoimmune diseases are chronic inflammatory diseases in whose pathophysiology are immune humoral and cellular disorders, dependent on genetic factors, hormonal, psychological and environmental factors. The disease is more prevalent among females, during the child-bearing age, and may influence the outcome of pregnancy and neonatal health causing significant morbidity and mortality. Lupus Erythematosus in addition to potentially affected by immunoendocrine physiological changes of pregnancy, is often associated with fertility problems. Recently, it has been suggested that the abnormalities that occurred during the early invasion of the syncytiotrophoblast, resulting in insufficient differentiation, deficient maturation and decrease in production of hCG may be the primary pathophysiological mechanism for fetal losses in the first quarter, in patients with SLE. The occurrence of elevated levels of total hCG and free ß-hCG in screening for Down’s syndrome of the second and first trimester was reported in pregnant women with lupus, but the paucity of supporting studies and the small size of the samples studied constituted a significant limitation on the trustworthiness of the results obtained. Objectives: this study aims to i. establish normative values for the serum parameters MoM’s (PAPP-A and free β-hCG) and it’s distribution, in the first trimester, by week of pregnancy; ii. assess the influence that the autoimmune diseases have on the MoM’s of individual biochemical PAPP-A and/or β-hCG, used in antenatal screening combined for the first trimester, and iii. whether the autoimmune diseases may make an increased rate of false positives, with consequent increase in the number of amniocenteses.Methodology: Prospective longitudinal study, consisting of a combined first trimester antenatal screening for aneuploidies lookup in two samples from the United Kingdom (n=45.854) and Portugal (n= 3.122). Socio-demographic, echographic and laboratory parameters were evaluated, and combined screening performance indicators were calculated. The analytical run of serum biochemical tests (PAPP-A and ß-hCG) was held at the Brahms Kryptor and in Delfia Xpress 6000. Comparisons between autoimmune group and non-autoimmune group were made. Results: Relating to population characteristics, the autoimmune group had significantly diferente values in the variables maternal age and gestational age. Comparing the groups with and without autoimmune disease, it was noted that there is an elevation of the MoM’s of free ß-hCG levels in pregnant women with autoimmune disease, particularly in cases of systemic lupus erythematosus. Conclusions: The results obtained reinforce the indication of FMF certified combined screening in pregnant women with autoimmune diseases, notably to the patients with SLE; However, correction factors should be calculated and entered in the risk algorithm, in order to avoid the rise in the number of false positive results, and consequently the over-use of invasive methods.

Antioxidant extraction process for Andean Oca by a photodiode array detector using response surface methodology

Application of Experimental Design techniques has proven to be essential in various research fields, due to its statistical capability of processing the effect of interactions among independent variables, known as factors, in a system’s response. Advantages of this methodology can be summarized in more resource and time efficient experimentations while providing more accurate results. This research emphasizes the quantification of 4 antioxidants extraction, at two different concentration, prepared according to an experimental procedure and measured by a Photodiode Array Detector. Experimental planning was made following a Central Composite Design, which is a type of DoE that allows to consider the quadratic component in Response Surfaces, a component that includes pure curvature studies on the model produced. This work was executed with the intention of analyzing responses, peak areas obtained from chromatograms plotted by the Detector’s system, and comprehending if the factors considered – acquired from an extensive literary review – produced the expected effect in response. Completion of this work will allow to take conclusions regarding what factors should be considered for the optimization studies of antioxidants extraction in a Oca (Oxalis tuberosa) matrix.

Proposal of a methodology for the design of the installation of turrets on aircrafts – the approach on the aerodynamic influences

The present work has its origin on the necessity of enabling a design certified company, or DOA (Design Organization Approval), to perform a modification; this modification is the installation of EO/IR (Electro-optical infrared) sensors on aircrafts. The subject of interest in this dissertation lies on the aerodynamic impact of the modification on the aircraft. The primary purpose of the present thesis is the creation of a methodology that regards the design stage of the modification. This methodology serves as guidance to the DOA design team that is assigned to the design of the modification. The methodology includes a recommendation to the certification of the modification; it contains a method intended to decide the location of the installation of the sensors on the aircraft; it also comprises of a design structure specifically adapted to the modification in study. Regarding the aerodynamic impact, it is studied the aerodynamic analysis’ tools, which allows one to relate the different stages of design to the most suited tools to each stage. A case study is performed with the purpose of not only validating the methodology which was created but also to giving a first approach to the preliminary design of the modification. As example, there are used the Lockheed Martin C-130 aircraft and the FLIR Star Safire III sensor.

Electro-Optical/Infrared sensor turret integration on an aircraft - structural im-pact on LOCKHEED MARTIN C-130H and design methodology

The growing need to patrol and survey large maritime and terrestrial areas increased the need to integrate external sensors on aircraft in order to accomplish those patrols at increasingly higher altitudes, longer range and not depending upon vehicle type. The main focus of this work is to elaborate a practical, simple, effective and efficient methodology for the aircraft modification procedure resulting from the integration of an Elec-tro-Optical/Infra-Red (EO/IR) turret through a support structure. The importance of the devel-opment of a good methodology relies on the correct management of project variables as time, available resources and project complexity. The key is to deliver a proper tool for a project de-sign team that will be used to create a solution that fulfils all technical, non-technical and certi-fication requirements present in this field of transportation. The created methodology is inde-pendent of two main inputs: sensor model and aircraft model definition, and therefore it is in-tended to deliver the results for different projects besides the one that was presented in this work as a case study. This particular case study presents the development of a structure support for FLIR STAR SAPHIRE III turret integration on the front lower fuselage bulkhead (radome) of the LOCKHEED MARTIN C-130 H. Development of the case study focuses on the study of local structural analysis through the use of Finite Element Method (FEM). Development of this Dissertation resulted in a cooperation between Faculty of Science and Technology - Universidade Nova de Lisboa and the company OGMA - Indústria Aeronáutica de Portugal

A systematic methodology to analyse the performance and design configurations of business interoperability in cooperative industrial networks

This thesis proposes a methodology for modelling business interoperability in a context of cooperative industrial networks. The purpose is to develop a methodology that enables the design of cooperative industrial network platforms that are able to deliver business interoperability and the analysis of its impact on the performance of these platforms. To achieve the proposed objective, two modelling tools have been employed: the Axiomatic Design Theory for the design of interoperable platforms; and Agent-Based Simulation for the analysis of the impact of business interoperability. The sequence of the application of the two modelling tools depends on the scenario under analysis, i.e. whether the cooperative industrial network platform exists or not. If the cooperative industrial network platform does not exist, the methodology suggests first the application of the Axiomatic Design Theory to design different configurations of interoperable cooperative industrial network platforms, and then the use of Agent-Based Simulation to analyse or predict the business interoperability and operational performance of the designed configurations. Otherwise, one should start by analysing the performance of the existing platform and based on the achieved results, decide whether it is necessary to redesign it or not. If the redesign is needed, simulation is once again used to predict the performance of the redesigned platform. To explain how those two modelling tools can be applied in practice, a theoretical modelling framework, a theoretical Axiomatic Design model and a theoretical Agent-Based Simulation model are proposed. To demonstrate the applicability of the proposed methodology and/or to validate the proposed theoretical models, a case study regarding a Portuguese Reverse Logistics cooperative network (Valorpneu network) and a case study regarding a Portuguese construction project (Dam Baixo Sabor network) are presented. The findings of the application of the proposed methodology to these two case studies suggest that indeed the Axiomatic Design Theory can effectively contribute in the design of interoperable cooperative industrial network platforms and that Agent-Based Simulation provides an effective set of tools for analysing the impact of business interoperability on the performance of those platforms. However, these conclusions cannot be generalised as only two case studies have been carried out. In terms of relevance to theory, this is the first time that the network effect is addressed in the analysis of the impact of business interoperability on the performance of networked companies and also the first time that a holistic approach is proposed to design interoperable cooperative industrial network platforms. Regarding the practical implications, the proposed methodology is intended to provide industrial managers a management tool that can guide them easily, and in practical and systematic way, in the design of configurations of interoperable cooperative industrial network platforms and/or in the analysis of the impact of business interoperability on the performance of their companies and the networks where their companies operate.

Assessing initial embodied energy in building structures using LCA methodology

The considerable amount of energy consumed on Earth is a major cause for not achieving sustainable development. Buildings are responsible for the highest worldwide energy consumption, nearly 40%. Strong efforts have been made in what concerns the reduction of buildings operational energy (heating, hot water, ventilation, electricity), since operational energy is so far the highest energy component in a building life cycle. However, as operational energy is being reduced the embodied energy increases. One of the building elements responsible for higher embodied energy consumption is the building structural system. Therefore, the present work is going to study part of embodied energy (initial embodied energy) in building structures using a life cycle assessment methodology, in order to contribute for a greater understanding of embodied energy in buildings structural systems. Initial embodied energy is estimated for a building structure by varying the span and the structural material type. The results are analysed and compared for different stages, and some conclusions are drawn. At the end of this work it was possible to conclude that the building span does not have considerable influence in embodied energy consumption of building structures. However, the structural material type has influence in the overall energetic performance. In fact, with this research it was possible that building structure that requires more initial embodied energy is the steel structure; then the glued laminated timber structure; and finally the concrete structure.

Methodology for WSN communication technologies automated field tests

Wireless Sensor Networks(WSN) are networks of devices used to sense and act that applies wireless radios to communicate. To achieve a successful implementation of a wireless device it is necessary to take in consideration the existence of a wide variety of radios available, a large number of communication parameters (payload, duty cycle, etc.) and environmental conditions that may affect the device’s behaviour. However, to evaluate a specific radio towards a unique application it might be necessary to conduct trial experiments, with such a vast amount of devices, communication parameters and environmental conditions to take into consideration the number of trial cases generated can be surprisingly high. Thus, making trial experiments to achieve manual validation of wireless communication technologies becomes unsuitable due to the existence of a high number of trial cases on the field. To overcome this technological issue an automated test methodology was introduced, presenting the possibility to acquire data regarding the device’s behaviour when testing several technologies and parameters that care for a specific analysis. Therefore, this method advances the validation and analysis process of the wireless radios and allows the validation to be done without the need of specific and in depth knowledge about wireless devices.