Experimental high-throughput adsorption unit for multi-evaluation of adsorbents for gas capture, storage and separation applications

Dissertação para obtenção do grau de Mestre em Engenharia Química e Bioquímica

Development of a "green process" for the isolation of natural functional extracts with anti-cancer activity - Application of high-pressure technology

Dissertação para obtenção do Grau de Mestre em Engenharia Química e Bioquímica

Upgrade of an experimental volumetric unit for gas adsorption equilibrium studies

In this work, a volumetric unit previously assembled by the research group was upgraded. This unit revamping was necessary due to the malfunction of the solenoid valves employed in the original experimental setup, which were not sealing the gas properly leading to erroneous adsorption equilibrium measurements. Therefore, the solenoid valves were substituted by manual ball valves. After the volumetric unit improvement its operation was validated. For this purpose, the adsorption equilibrium of carbon dioxide (CO2) at 323K and 0 - 20 bar was measured on two different activated carbon samples, in the of extrudates (ANG6) and of a honeycomb monolith (ACHM). The adsorption equilibrium results were compared with data previously measured by the research group, using a high-pressure microbalance from Rubotherm GmbH (Germany) – gravimetric. The results obtained using both apparatuses are coincident thus validating the good operation of the volumetric unit upgraded in this work. Furthermore, the adsorption equilibrium of CO2 at 303K and 0 - 10 bar on Metal-Organic Frameworks (MOFs) Cu-BTC and Fe-BTC was also studied. The CO2 adsorption equilibrium results for both MOFs were compared with the literature results showing good agreement, which confirms the good quality of the experimental results obtained in the new volumetric unit. Cu-BTC sample showed significantly higher CO2 adsorption capacity when compared with the Fe-BTC sample. The revamping of the volumetric unit included a new valve configuration in order to allow testing an alternative method for the measurement of adsorption equilibrium. This new method was employed to measure the adsorption equilibrium of CO2 on ANG6 and ACHM at 303, 323 and 353K within 0-10 bar. The good quality of the obtained experimental data was testified by comparison with data previously obtained by the research group in a gravimetric apparatus.

Molecular simulation of gas adsorption equilibria in nanoporous materials

This work is divided into two distinct parts. The first part consists of the study of the metal organic framework UiO-66Zr, where the aim was to determine the force field that best describes the adsorption equilibrium properties of two different gases, methane and carbon dioxide. The other part of the work focuses on the study of the single wall carbon nanotube topology for ethane adsorption; the aim was to simplify as much as possible the solid-fluid force field model to increase the computational efficiency of the Monte Carlo simulations. The choice of both adsorbents relies on their potential use in adsorption processes, such as the capture and storage of carbon dioxide, natural gas storage, separation of components of biogas, and olefin/paraffin separations. The adsorption studies on the two porous materials were performed by molecular simulation using the grand canonical Monte Carlo (μ,V,T) method, over the temperature range of 298-343 K and pressure range 0.06-70 bar. The calibration curves of pressure and density as a function of chemical potential and temperature for the three adsorbates under study, were obtained Monte Carlo simulation in the canonical ensemble (N,V,T); polynomial fit and interpolation of the obtained data allowed to determine the pressure and gas density at any chemical potential. The adsorption equilibria of methane and carbon dioxide in UiO-66Zr were simulated and compared with the experimental data obtained by Jasmina H. Cavka et al. The results show that the best force field for both gases is a chargeless united-atom force field based on the TraPPE model. Using this validated force field it was possible to estimate the isosteric heats of adsorption and the Henry constants. In the Grand-Canonical Monte Carlo simulations of carbon nanotubes, we conclude that the fastest type of run is obtained with a force field that approximates the nanotube as a smooth cylinder; this approximation gives execution times that are 1.6 times faster than the typical atomistic runs.

Aplicação de métodos estatísticos para o controlo e melhoria do processo: produção de rolhas técnicas de cortiça

A aposta na Qualidade e no Controlo de Processos, constitui actualmente, um requisito fundamental para as empresas se manterem competitivas. A Amorim e Irmãos, empresa onde o presente estudo é realizado, é líder de mercado no sector da cortiça, e aposta na melhoria contínua dos seus processos e produtos. Em linha com essa estratégia, a presente dissertação tem como objectivo melhorar o processo de produção de um dos produtos da Amorim e Irmãos, as rolhas de cortiça Twin-Top produzidas na unidade industrial Equipar, em Coruche. O processo em estudo, denominado de Rosa, é caracterizado por ter uma elevada variabilidade pois é muito sensível às condições da temperatura ambiente e à heterogeneidade da matéria prima. Os objectivos do processo passam precisamente por reduzir a heterogeneidade presente nas características da cortiça, ao definir valores alvo para a humidade, Massa volúmica corrigida a 8% de humidade e quantidade de um composto presente na cortiça, o TCA. Este composto afecta negativamente as características da rolha, portanto um dos objectivos deste trabalho é diminuir a quantidade de TCA presente no granulado. Por forma a solucionar o problema, de reduzir a variabilidade do Rosa aproximando-o dos valores alvo para as características a controlar aplicaram-se métodos estatísticos como o Desenho de Experiências e as Cartas de Controlo. O Rosa caracteriza-se por ter várias etapas, percorridas pelo granulado de forma sequencial. Tendo em conta que apenas na primeira etapa é que ocorrem alterações na quantidade de TCA presente no granulado decidiu-se que seria adequado realizar dois Desenhos de Experiências. O primeiro a ser aplicado na fase inicial do processo para maximizar a extracção de TCA e o segundo a ser aplicado nas restantes fases para controlar as outras características em cima referidas. Por fim realizou-se um estudo para aplicação de Cartas de Controlo no processo. Por via do primeiro DOE foram implementadas alterações no processo (aumento da pressão de vapor para 2,3 bar e da velocidade dos sem-fins para 10 Hz, na máquina RH), que permitiram reduzir com sucesso a quantidade média de TCA (2,4,6 tricloroanisol) presente no granulado. Este feito teve bastante relevância para a empresa, uma vez que a extracção deste composto constitui um dos seus objectivos estratégicos e é também uma das metas mais importantes a nível da qualidade do produto.(...)

Towards printed carbon nanotube transistors on paper substrates

This thesis reports the work performed in the optimization of deposition parameters of Multi – Walled Carbon Nanotubes (MWCNT) targeting the development of a Field Effect Transistors (FET) on paper substrates. The CNTs were dispersed in a water solution with sodium dodecyl sulphate (SDS) through ultrasonication, ultrasonic bath and a centrifugation to remove the supernatant and have a homogeneous solution. Several deposition tests were performed using different types of CNTs, dis-persants, papers substrates and deposition techniques, such as spray coating and inkjet printing. The characterization of CNTs was made by Scanning Electron Microscopy (SEM) and Hall Effect. The most suitable CNT coatings able to be used as semiconductor in FETs were deposited by spray coat-ing on a paper substrate with hydrophilic nanoporous surface (FS2) at 100 ºC, 4 bar, 10 cm height, 5 second of deposition time and 90 seconds of drying between steps (4 layers of CNTs were deposited). Planar electrolyte gated FETs were produced with these layers using gold-nickel gate, source and drain electrodes. Despite the small current modulation (Ion/Ioff ratio of 1.8) one of these devices have p-type conduction with a field effect mobility of 1.07 cm2/V.s.

Novel ready-to-eat mango product using gellan gum as gelling agent: physico-chemical, microbial and sensory characteristics

Este trabalho foi efectuado com o apoio da Universidade de Lisboa, Instituto Superior de Agronomia com o Centro de Engenharia dos Biossistemas (CEER

Avaliação da resistência à fadiga de instrumentos endodônticos sujeitos a polimento electrolítico e a tratamento térmico específico

Esta dissertação teve como principais objectivos determinar a resistência à fadiga de instrumentos endodônticos de Níquel-Titânio sujeitos a polimento electrolítico e tratamento térmicopor autoclave, assim como estudar o comportamento estrutural dos instrumentos, através de análise numérica pelo método dos elementos finitos, quando sujeitos à curvatura em três regiões distintas. Vinte e dois instrumentos Hyflex (Coltene, Switzerland), com dois tamanhos diferentes (.04/20 e .06/20), foram divididos em 3 grupos: Grupo I, 4 instrumentos (dois de cada tamanho) sem qualquer tipo de tratamento térmico ou superficial; Grupo II, 12 instrumentos (seis de cada tamanho) submetidos a polimento electrolítico; Grupo III, 6 instrumentos (três de cada tamanho) submetidos a polimento electrolítico e tratamento térmico por autoclave. Todos os instrumentos foram sujeitos a testes de fadiga por flexão rotativa. Os instrumentos foram polidos, aplicando uma potência de 30 V, durante 3 segundos, a uma taxa de escoamento da solução electrolítica igual a 1. O tratamento térmico em autoclave foi realizado a uma temperatura e pressão de 134ºC e 2,16 bar, respectivamente, durante 30 minutos. O raio e ângulo de curvatura impostos durante os ensaios experimentais foram de 4,7 mm e 45º, respectivamente. A velocidade de rotação utilizada para testar os instrumentos foi de 500 rpm. O tempo até à fractura foi registado e o número de ciclos à fractura foi calculado. Calculou-se a área circular equivalente do instrumento Hyflex .06/20, em 3 regiões diferentes do mesmo (apical, central e coronal), na secção do instrumento correspondente a metade do comprimento do arco imposto pela curvatura do canal. Os valores de extensão teóricos foram calculados com o objectivo de comparar com a distribuição de tensão e extensão obtida pelo método dos elementos finitos. Os valores calculados analiticamente estão coerentes com os valores obtidos pelo método dos elementos finitos. Existe um grande risco de fractura do instrumento durante o tratamento endodôntico de canais radiculares que imponham curvaturas coronais aos instrumentos. Analisando os resultados obtidos experimentalmente, verifica-se que existem diferenças significativas, na duração e no número de ciclos à fadiga, entre os instrumentos polidos e não polidos e entre os instrumentos com e sem tratamento térmico por autoclave. Conclui-se que o polimento electrolítico tem uma influência significativa na vida à fadiga dos instrumentos Hyflex .04/20 e .06/20. O tratamento térmico por autoclave tem uma influência negativa nos instrumentos Hyflex .04/20 e uma influência positiva nos instrumentos Hyflex .06/20.

A lesão de isquémia/reperfusão em transplante hepático: análise genética, morfológica e correlação clínica

RESUMO: O transplante hepático ortotópico é uma terapêutica aceite para casos selecionados de falência hepática terminal. O procedimento tem-­‐se aperfeiçoado, evidenciado pelo aumento da taxa de sobrevida de 30 para 75% aos 5 anos, mas cerca de 13 a 27% dos enxertos desenvolve falência primária (PNF) ou disfunção primária (DF) após o transplante. As consequências são devastadoras para a sobrevida do doente e do enxerto. A sua etiologia é multifactorial, incluindo factores relacionados com o dador e o receptor, tempos de isquémia, agressões cirúrgicas, bem como características anatomopatológicas do enxerto. A lesão de isquémia/reperfusão mantem-­‐se como um factor de risco intra operatório, com implicações directas sobre toda a evolução do transplante : existe uma relação íntima entre a PNF e a DF, a preservação do enxerto, a lesão de isquémia/reperfusão, e a falência do transplante. Além disso, está comprovada evidência que sugere que a lesão de I/R torna um aloenxerto mais vulnerável por aumento da imunogenicidade, aumentando a probabilidade de episódios de rejeição precoce e tardia. Com base na prática clínica quotidiana do CHBPT HCC, estudaram-­‐se 54 casos de transplante hepático, agrupados segundo grupos por alocação do enxerto respectivo: Grupo 1(n=27): dador cadáver para receptor cirrótico, Grupo 2 (n=15): dador cadáver para receptor PAF, Grupo 3 (n=12): dador PAF para receptor cirrótico. Observaram-­‐se as alterações histológicas e moleculares sobre o enxerto até ao final da operação do receptor, e as suas consequências clínicas,avaliando: -­‐ As diferentes capacidades de resistência e cada enxerto à lesão de isquémia/reperfusão. -­‐ As situações em que os factores do receptor se sobrepõem às do enxerto na definição do prognóstico, e vice versa. -­‐ A relevância das lesões histológicas e moleculares precoces no tecido hepático na evolução do enxerto e do receptor. Foram colhidas biópsias por agulha dos 54 enxertos hepáticos,42 provenientes de cadáver com coração batente(morte cerebral) e 12 provenientes de dador vivo com PAF, em três tempos diferentes do processo de colheita e transplante hepático: ­‐ A primeira(T0)antes da clampagem da aorta do dador -­‐ A segunda (T1) no final da isquémia fria -­‐ A terceira (T2) após a reperfusão do enxerto, durante o encerramento da parede abdominal. A estas amostras foi extraído RNA total, convertido em cDNA por transcrição reversa e feita a análise da expressão dos genes da CTLA4, IL-­‐1β, IL-­‐4, IL-­‐6, IL-­‐13, TNF-­‐α, Perforina, Selectina, (SELE), Fas-­‐ligando, Granzima-­‐B, Heme-­‐Oxigenase 1(HO1)e Óxido Nítrico Sintetase(iNOS2A)por PCR quantitativo segundo o método do Ct comparativo, utilizando como referência a expressão dos genes da amostra não-­‐isquémica –T0. Os fragmentos de todas as biópsias foram seccionados, para envio de amostra comparativa para processamento histológico habitual, sem qualquer alteração ao protocolo seguido habitualmente na Unidade de Transplantação do Hospital Curry Cabral. A presença de alguns parâmetros histológicos definidos, como esteatose, necrose, vacuolização, congestão sinusoidal e infiltração neutrofílica, foi registada e contabilizada numa classificação numérica. O seguimento clínico e laboratorial, bem como o acompanhamento de eventuais complicações, foi registado e correlacionado com os dados das colheitas de órgãos e com os dados das biópsias. Foram consideradas as seguintes variáveis, como as mais relevantes e objectivas para a interpretação da evolução clínica, tendo sido comparadas estatisticamente com os dados recolhidos, laboratoriais e clínicos: disfunção do enxerto, 207 pós operatórias, número de internamentos igual ou superior a 2 e rejeição crónica e/ou morte do receptor. Foram identificadas características clínicas menos favoráveis, a considerar, nalgumas circunstâncias: género feminino do receptor (sobretudo associado a enxerto masculino, p=0,077), isquémia fria superior a 500 minutos (p=0,074), isquémia quente superior a 90 minutos (p=0,099). Na análise laboratorial, distinguiram-­‐se duas características histológicas desfavoráveis e irreversíveis, como índice de mau prognóstico: a necrose e a balonização (p=0,029); no painel genético escolhido neste estudo,a expressão basal de IL-­‐1β(p=0,028), de SELE p=0,013)e de FAS-­‐L (p=0,079)relacionaram-­‐se com pior prognóstico. Algumas características protectoras intrínsecas dos enxertos só se revelaram indirectamente, como menor infiltração neutrofílica e maior expressão de HO1 e de iNOS nos enxertos PAF, não tendo sido possível provar uma interferência directa nos resultados clínicos. Não se obteve expressão mensurável de genes anti-­‐ inflamatórios nas biopsias hepáticas processadas neste estudo, como a IL13 e a I 4: assim, com a metodologia utilizada, não foi possível obter um perfil de expressão genética associado a boa evolução clínica. O perfil inverso foi sugerido apenas pela expressão basal dos 3 genes mencionados (FAS-­‐L,IL-­‐1β e SELE)no mesmo painel, com o protocolo seguido neste conjunto de 54 doentes. As características do receptor sobrepuseram-­‐se às do enxerto no caso de: -­‐ diagnóstico de PAF no receptor, que determinou uma maior predisposição para a disfunção do enxerto, o que, por sua vez, determina uma menor sobrevida. No entanto, o diagnóstico de PAF no receptor exibe uma curva de sobrevida mais favorável. -­‐ receptores com um baixo balanço de risco (BAR)definiram características favoráveis para enxertos com níveis baixos e moderados de esteatose, fazendo que esta característica, definida como um risco acrescido, não só não se manifestasse clinicamente,como parecesse um factor favorável. As características do enxerto sobrepuseram-­‐se às do receptor no caso de: -­‐ tempo de isquémia fria superior a 500 minutos -­‐ balonização, necrose, FAS-­‐L,IL-­‐1β e SELE em T0 A integração dos resultados moleculares e morfológicos com a evolução clínica, realça o papel da mobilização precoce de neutrófilos nos desempenhos menos favoráveis do enxerto hepático. -------------ABSTRACT: Orthotopic liver transplantation is na accepted therapeutic procedure for selected cases of terminal liver failure. The procedure has been improved, evidenced by the rise of survival rates from 30 to 70% at 5 years, but 13 to 27% of the liver grafts develops primary non function (PNF) or primary dysfunction (PDF) after transplantation. The consequences are devastating for the survival of the patient and of the graft. Its etiology is multifactorial, including factos related with the donor and with the recipient, ischemic times, surgical aggressions, as well as the histological characteristics of the graft. The ischemia/reperfusion lesion is still an intraoperative risk factor, with direct implications in the whole transplant outcome: there is a close interrelation between PNF and DF, graft preservation, ischemia / reperfusion lesion and graft failure. Beyond his, there is proved evidence that suggests that I/R lesion turns the allograft more vulnerable by increasing its immunogenity, increasing the probability of precocious and late rejection episodes. Based on the daily clinical practice at CHBPT /HCC, 54 cases of hepatic transplantation have been studied, grouped by allocation of each graft: Group (n=27):deceased do nortocirrhotic recipient, Group 2 (n=15): deceased donor to FAP recipient, Group 3 (n=12): FAP living donor to cirrhotic recipient. The histologic and molecular changes in the liver graft were observed until the end of the recipiente operation,together with its clinical consequences, evaluating:-­‐The different capacity of resistance of each graft to the ischemia / reperfusion lesion -­‐ The situations where the recipiente factos overlap the ones of the graft, in the definition of prognosis, and vice versa.-­‐ The relevance of the precocious histologic and molecular lesions of the hepatic tissue in the clinical outcome of the graft and the recipient. Needle biopsies were obtained from 54 liver grafts, 42 deceased brain dead donors and 12 from FAP living donors, at three diferente times of the harvesting and the hepatic transplantation: The first one (T0) before clamping the donor aorta -­‐ The second one (T2) in the end of cold ischemia time -­‐ The third one (T) after the reperfusion of the graft, during the closure of the abdominal wall. Total RNAwas extracted to these samples, converted to cDNA by reverse transcription and the analysis of gene expression was made for CTLA4,IL-­‐1β,IL-­‐4,IL-­‐6,IL-­‐13,TNF-­‐α,Perforin,E Selectin (SELE),Fas-­‐ligand,Granzyme-­‐B,Heme-­‐oxigenase 1 (HO1) and Nitric Oxide Sintetase (iNOS2A) by quantitative PCR, according with the Ct comparative method, using the expression of the non ischemic sample – T0. The fragments of all the biopsies were divided, to send a comparative sample to the usual histologic processement, keeping the same usual protocol at the Transplantation Unit of Curry Cabral Hospital. The presence of some defined histologic parameters, such as steatosis, necrosis, vacuolization, sinusoidal congestion and neutrophilic infiltration, was registered and catalogued in a numeric classification. The clinical and laboratory follow-­‐up, as well as the following of eventual complications, was registered and correlated with the data from organ procurement operations and with the data from the biopsies. The following variables were considered as the most relevant and objective ones, to the interpretation of the clinical evolution, being statistically compared with the clinical and laboratorial collected data: graft dysfunction, post-­‐operative complications, number of readmissions of 2 or more and chronic rejection and /or recipiente death. There were identified some unfavorable clinical characteristics, to be considered under certain circumstances: recipiente female gender (specially associated with malegraft, p=0,077), cold ischemia time of more than 500 minutes (p=0,074), warm ischemia time of more than 90 minutes (p=0,099). In the laboratory analysis, two histologic characteristics were identified as unfavorable and irreversible, associated with bad prognosis: necrosis and balonization (p=0,029); in the gene panel selected in this study, the basal expression of IL-­‐1β (p=0,028), SELE (p=0,013) and FAS-­‐L (p=0,079)were related with worse prognosis.Some intrinsic protective characteristics of the grafts were only indirectly revealed, such as less neutrophilic infiltration and bigger expression of HO1 and iNOS in FAP grafts, being impossible to prove any direct inte ference in the clinical results. A relevant and measurable expression of the anti inflammatory genes IL13 and IL4 was not obtained: with the used methodology, it was impossible to obtain a gene expression profile associated with a favorable clinical outcome.The inverse profile was suggested only by the basal expression of the three mentioned genes (FAS-­‐L, IL-­‐ 1β e SELE) in the same gene panel, according with the followed protocol in this group of 54 patients. The characteristics of the recipient overlapped those from the graft, in the case of :-­‐ FAP diagnosis in the recipient, which determined a bigger predisposition to graft dysfunction, which by itself determines a shorter survival. However, FAP diagnosis in the recipiente depicts a more favorable survival curve. -­‐ Recipients with a low balance risk índex (BAR) defined favorable characteristics to grafts with low and moderate grades of steatosis, making that this characteristic, associated with bad prognosis, looked like a favorable factor, and with no clinical interference. The graft characteristics overlapped those from the receptor in the case of: -­‐ Cold ischemic time more than 500 minutes -­‐ Balonization, necrosis, FAS-­‐L, IL-­‐1β and SELE at T0. The integration of molecular and morphologic results with the clinical evolution, stresses the role of a precocious neutrophils mobilization in the worse outcomes of liver grafts.

Evaluating the potential of yeast strains to produce added value products for the food and/or pharmaceutical industries

This study focus in the valorization of the apple pomace with the main goal of obtaining added value products. For that, hot compressed water technology was used for the extraction of phenolic compounds and hydrolysis of polysaccharides presents in the lignocellulosic structure of apple pomace to obtain simple sugars. The sugars have been utilized as alternative carbon source for growth, lipid accumulation and carotenoids production by five different yeast Yarrowia lipolytica, Rhodotorula mucilaginosa, Rhodotorula glutinis, Rhodosporidium babjevae and Rhodosporidium toruloides. Hydrolysis experiments were carried out with constant pressure of 100 bar, flow rate of 2mL/min and temperatures between 50°C and 250°C. The amount of total sugars present in apple pomace hydrolysates showed maximum values for the hydrolysis temperatures of 110°C and 190°C. In fact, these temperatures revealed the best results regarding the monosaccharides quantities. The amount of 5-HMF and furfural in each hydrolysate varied through the different temperatures. Maximum values for 5-HMF were obtained with 170°C, while furfural showed to be maximum at 210°C. Extraction of phenolic compounds were performed in simultaneously with hydrolysis reactions. Total phenolic compounds (TPC) increased along the temperature, however with small variations between 170°C and 250°C. Hydrolysates were then used as alternative carbon source to yeast growth. R. mucilaginosa shows the highest optical density, with the hydrolysate obtained at 130°C. Carotenoids produced by these yeast scored a total of 7.02μg carotenoids/g cell dry weight, while for the control assay, the same yeast scored 9.31μg caratonoides/g cell dry weight. β-carotene was quantified by HPLC, were 33% of the carotenoid production by R. mucilaginosa with hydrolysate as carbon source, corresponded to β-caroteno.

Development and application of NMR techniques to study water-in-CO2 microemulsions

Self-assembly is a phenomenon that occurs frequently throughout the universe. In this work, two self-assembling systems were studied: the formation of reverse micelles in isooctane and in supercritical CO2 (scCO2), and the formation of gels in organic solvents. The goal was the physicochemical study of these systems and the development of an NMR methodology to study them. In this work, AOT was used as a model molecule both to comprehensively study a widely researched system water/AOT/isooctane at different water concentrations and to assess its aggregation in supercritical carbon dioxide at different pressures. In order to do so an NMR methodology was devised, in which it was possible to accurately determine hydrodynamic radius of the micelle (in agreement with DLS measurements) using diffusion ordered spectroscopy (DOSY), the micellar stability and its dynamics. This was mostly assessed by 1H NMR relaxation studies, which allowed to determine correlation times and size of correlating water molecules, which are in agreement with the size of the shell that interacts with the micellar layer. The encapsulation of differently-sized carbohydrates was also studied and allowed to understand the dynamics and stability of the aggregates in such conditions. A W/CO2 microemulsion was prepared using AOT and water in scCO2, with ethanol as cosurfactant. The behaviour of the components of the system at different pressures was assessed and it is likely that above 130 bar reverse microemulsions were achieved. The homogeneity of the system was also determined by NMR. The formation of the gel network by two small molecular organogelators in toluene-d8 was studied by DOSY. A methodology using One-shot DOSY to perform the spectra was designed and applied with success. This yielded an understanding about the role of the solvent and gelator in the aggregation process, as an estimation of the time of gelation.

Valorization of grape pomace through hot compressed water extraction/hydrolysis

The world energy consumption is expected to increase strongly in coming years, because of the emerging economies. Biomass is the only renewable carbon resource that is abundant enough to be used as a source of energy Grape pomace is one of the most abundant agro-industrial residues in the world, being a good biomass resource. The aim of this work is the valorization of grape pomace from white grapes (WWGP) and from red grapes (RWGP), through the extraction of phenolic compounds with antioxidant activity, as well as through the extraction/hydrolysis of carbohydrates, using subcritical water, or hot compressed water (HCW). The main focus of this work is the optimization of the process for WWGP, while for RWGP only one set of parameters were tested. The temperatures used were 170, 190 and 210 °C for WWGP, and 180 °C for RWGP. The water flow rates were 5 and 10 mL/min, and the pressure was always kept at 100 bar. Before performing HCW assays, both residues were characterized, revealing that WWGP is very rich in free sugars (around 40%) essentially glucose and fructose, while RWGP has higher contents of structural sugars, lignin, lipids and protein. For WWGP the best results were achieved at 210 °C and 10 mL/min: higher yield in water soluble compounds (69 wt.%), phenolics extraction (26.2 mg/g) and carbohydrates recovery (49.3 wt.% relative to the existing 57.8%). For RWGP the conditions were not optimized (180 °C and 5 mL/min), and the values of the yield in water soluble compounds (25 wt.%), phenolics extraction (19.5 mg/g) and carbohydrates recovery (11.4 wt.% relative to the existing 33.5%) were much lower. The antioxidant activity of the HCW extracts from each assay was determined, the best result being obtained for WWGP, namely for extracts obtained at 210 °C (EC50=20.8 μg/mL; EC50 = half maximum effective concentration; EC50 = 22.1 μg/mL for RWGP, at 180 ºC).

A publicidade na advocacia

The aim of this dissertation is the analysis of the rules on advertising in advocacy. Presently this is a controversial issue that is far from being consensual. As we will demonstrate through the text, the arguments presented are, one the one hand, a safeguard of the deontological values of the profession that govern this professional class and, on the other hand, the interests of the legal service providers, in the current context. Opinions differ substantially among professionals who exercise the profession in individual practice, that defend balanced and fair rules to assert the true brightness of the professional lawyer, and those who work in an organized structure, such as the law firms, who defend more flexible rules in advertising and promoting the offices. Currently the rules of advertising for lawyers are provided by article 89º of the Statue of the Portuguese Bar Association. However, these rules will soon suffer adjustments that will take into consideration the Law no. 2/2013 of january 10, which will extend the scope of advertising for public associations, in order to increase the competition among these, at national or European level. Following this logic, arguments such as unequal access to available means of advertising for financial reasons or that the better publicized service is not always the most advantageous to the costumer will be analyzed and criticized.