37 resultados para Scanning Tunneling Microscopy
Resumo:
Dissertação para obtenção do Grau de Doutor em Conservação e Restauro, especialidade Ciências da Conservação
Resumo:
Dissertação Apresentada na Faculdade de Ciências e Tecnologia da Universidade Nova de Lisboa para obtenção do grau de Mestre em Ciências da Conservação, especialização em Pintura
Resumo:
Dissertation to obtain the Master Degree in Biotechnology
Resumo:
Dissertação para obtenção do Grau de Mestre em Engenharia Química e Bioquímica
Resumo:
Dissertação para obtenção do Grau de Mestre em Engenharia Química e Bioquímica
Resumo:
RESUMO: A operação de Nissen, por laparoscopia, é considerada a cirurgia antirefluxo mais adequada por ser a que melhor replica a fisiologia normal da válvula gastresofágica na maioria dos doentes com sintomas típicos de doença do refluxo gastresofágico (DRGE). São critérios técnicos o encerramento seguro dos pilares do diafragma e a criação de fundoplicatura completa (360 graus), curta (inferior a dois centímetros), lassa e sem tensão – desiderando para o qual a laqueação proximal dos vasos curtos gástricos é crucial. Realizei a operação de Nissen, por laparoscopia, em sessenta mulheres e quarenta homens com DRGE, sem mortalidade operatória, no Serviço de Cirurgia 6 do Hospital dos Capuchos, CHLC, EPE. Os cem doentes apresentavam média etária de 46 anos e queixas, com tempo de evolução entre 1 e 43 anos, de pirose (90%), regurgitação (80%), azia (73%), epigastralgias (54%). A endoscopia alta revelou esofagite de grau Savary-Miller 0-I (62%), II (23%), III (8%), IV (7%); hérnia de deslizamento (71%), hérnia paraesofágica (8%), sem hérnia (21%); a pHmetria de 24h diagnosticou padrão misto (38%), levantado (20%), deitado (20%), inconclusiva (22%) e a manometria diagnosticou EEI hipotónico (35%), peristálise esofágica normal (88%), hipomotilidade ligeira (5%) e foi omissa (7%). Hérnia hiatal, esofagite grave, ineficácia do controlo sintomático com inibidor da bomba de protões e desejo de descontinuidade terapêutica constituíram as indicações para tratamento cirúrgico. Por celioscopia, efetuei laqueação dos vasos curtos gástricos (70%), cruroplastia e fundoplicatura total (seda 2/0), curta (dimensão média 1,5-2 cm), lassa, sem tensão e sem calibração intraoperatória do esófago. A fundoplicatura de Nissen laparoscópica mostrou-se segura e eficaz no tratamento da DRGE. A sua idoneidade foi ainda comprovada pela normalização da pHmetria de 24 horas e da manometria pós-operatórias, com significado estatístico, num grupo de catorze voluntários assintomáticos. Em catamnese com recuo médio 30,7 meses 94% dos indivíduos persistem assintomáticos. Interrogando-me acerca das repercussões desta operação sobre a microcirculação do fundo gástrico coloquei, como premissa, a possibilidade de na operação de Nissen a laqueação dos vasos curtos poder induzir modificação no diâmetro arteriolar da parede do fundo gástrico. Para pesquisar a influência da laqueação dos vasos curtos gástricos e da fundoplicatura total sobre o calibre arteriolar da parede do estômago no cárdia, no fundo e na região dos vasos curtos gástricos, idealizei um Projeto de investigação experimental em cobaias. O Projeto foi desenvolvido no Centro de Investigação do Departamento de Anatomia da FCM-UNL. Para a sua realização obtive autorização da Comissão Científica e Pedagógica da FCM-UNL, requeri a acreditação como investigador à Direção Geral de Veterinária e, por recorrer à utilização de animais, submeti-o à Comissão de Ética da FCM-UNL, que o aprovou por unanimidade. Para limitar o número de animais utilizados ao mínimo necessário, calculei, por método estatístico, a quantidade de cobaias necessárias. Subdividindo-as num grupo de ensaio (GE), onde realizei a operação de Nissen, e num grupo de controlo (GC), onde apenas procedi a tração gástrica, defini e apliquei protocolos de anestesia, de cirurgia e de eutanásia, segundo os princípios dos 3R – Replacement, Reduction, Refinement da técnica de experimentação humana de Russell e Burch (1959) – uma estrutura ética amplamente aceite para a realização de experimentação científica humanizada com animais. A utilização das técnicas de estudo angiomorfológico permitiu-me analisar e descrever a anatomia normal, a vascularização arterial macroscópica, a microangioarquitetura, por microscopia eletrónica de varrimento de moldes de corrosão vascular, e a histologia da parede do estômago da cobaia. Procedi, também, à definição dos critérios morfológicos que considerei suscetíveis de validação deste modelo animal para o estudo proposto. Por razões académicas, foi necessário abreviar o Projeto encurtando, em cerca de dois anos, o prazo disponível para conclusão do estudo. Apreciando-o com o Gabinete de Análise Epidemiológica e Estatística do Centro de Investigação do CHLC, EPE, optou-se, perante a escassez de elementos após já terem sido recrutados 46 animais, por uma amostra, suplementar, de dimensão de conveniência de oito cobaias (quatro em cada grupo), condicionada pelo limite temporal universitário e pelo respeito pela dignidade dos animais. Neste subgrupo procedi, por microscopia eletrónica de varrimento, à medição dos calibres arteriolares nos moldes vasculares do cárdia, do fundo e da zona dos vasos curtos gástricos tanto no GC como no GE efetuando 469 medições no primeiro e 461 no último. Os dados foram enviados ao Centro de Investigação do CHLC, EPE que procedeu à sua análise estatística (ANOVA). A referida análise revelou que as arteríolas do plexo mucoso e as do plexo submucoso do cárdia, do fundo e da região dos vasos curtos gástricos, mostraram aumento de calibre no GE. O aumento foi, estatisticamente, significativo por ser superior a 50% do calibre do GC. Nos vasos curtos, a diferença foi mais pequena, mas persistiu sendo, estatisticamente, significativa. Os vasos retos dilataram na base, na sua emergência do plexo seroso, apenas no fundo gástrico. Na cobaia a operação de Nissen – fundoplicatura total com laqueação dos vasos curtos gástricos –, provocou vasodilatação arteriolar do fundo gástrico. Considero que essa vasodilatação constituiu acomodação à modificação introduzida e infiro que o mesmo possa acontecer no ser humano. Admito, assim, que também ocorra vasodilatação no ser humano, na sequência da laqueação dos vasos curtos gástricos, pela analogia microvascular entre as duas espécies e que essa vasodilatação corresponda, igualmente, a um mecanismo de adaptação arteriolar visando, por exemplo, suprir a perda incorrida pela laqueação. A associação experimental entre laqueação dos vasos curtos gástricos e realização de fundoplicatura total, que exerce aumento inerente de pressão sobre a JEG, não só não provocou défice da microcirculação do esófago distal ou do estômago proximal como desencadeou um mecanismo de vasodilatação fúndica que reforça o conceito de segurança da operação de Nissen para tratamento da DRGE. -------------- ABSTRACT: The laparoscopic Nissen operation is considered to be the most appropriate antirefluxsurgery because it suitably replicates the standard physiology of the gastroesophageal valve in most patients with typical symptoms of gastroesophageal reflux disease (GERD). The technical criteria includes the safe shutdown of the diafragmatic crura(cruroplasty) and the creation of a complete fundoplication (360 degrees), short (lesser than two inches), floppy and without tension – a goal for which the proximal ligation of the gastric short vessels is crucial. The laparoscopic Nissen operation was performed in sixty women and forty men with GERD, without any operative mortality, at the Surgical Department of the Hospital dos Capuchos, CHLC, EPE. The one hundred patients, averaged 46 years old, complained of heartburn (90%), regurgitation (80%) and upper abdominal pain (54 %). The endoscopy process revealed Savary-Miller esophagitis of grade 0-I (62%), II (23%), III (8%), IV (7%), sliding hernia (71%), paraesophageal hernia (8%) or no herniation (21%). The pHmetry/24h diagnosed mixed pattern (38%), raised (20%), lying (20%) or inconclusive (22%). The manometry diagnosed hypotensive LES (35%), normal esophageal peristalsis (88%), mild hypomotility (5%) and was absent (7%). Hiatal hernia, severe esophagitis, ineffective symptomatic control with proton pump inhibitor and request for treatment discontinuation were the signs for surgical action. A laparoscopic ligation of short gastric vessels (70%), cruroplasty and fundoplication (silk 2/0), short (average size 1.5–2 cm) and floppy, without tension and without intraoperative calibration of the esophagus were thus performed. The laparoscopic Nissen fundoplication behaved safe and effective in treating GERD. In a group of 14 asymptomatic volunteers its reputation was confirmed with statistical significance by normalization of postoperative pHmetry/24h and manometry. 94% of the individuals remained asymptomatic up to 30.7 months (average) in the follow-up. Interrogating myself about the impact of this operation on the microcirculation of the gastric fundus I put premised on the possibility of the ligation of the short gastric vessels in the Nissen procedure can induce changes in the arteriolar diameter in the Wall of the gastric fundus. To explore the influence of ligation of the short gastric vessels and the fundoplication at the arteriolar caliber of the cardia, the fundus and the region of the short vessels of the gastric wall, I designed a project of experimental research in guinea pigs with two interdependent components: one veterinary and another technical where I applied angiomorphological studies. The project was developed at the Research Centre of the Department of Anatomy FCMUNL. For its accomplishment I got permission from the Scientific and Pedagogical Committee of the FCM-UNL, I requested for accreditation as a researcher at the General Directorate of Veterinary and, by resorting to the use of animals I submitted it to the Ethics Committee of the FCM-UNL, which approved it unanimously. The guinea pigs were divided into two experimental groups: an experimental group (EG), in which the Nissen procedure was performed and a control group (CG) in which only a gastric traction was done. Protocols of anesthesia, surgery and euthanasia were applied according to the 3Rs – Replacement, Reduction, Refinement of the technique of human experimentation of Burch and Russell (1959) – a widely accepted ethical framework for conducting scientific experiments using animals humanely. Using histological and angiomorphological techniques, I performed the analysis and the description of the normal, macro and microvascular, anatomy of the guinea pig stomach and I defined the morphological criteria that I considered susceptible for validation of this animal model for the proposed study. By means of scanning electron microscopy I measured the arteriolar calibers of the vascular casts of the cardia, of the fundus and of the short gastric vessels in both CG and EG, making 469 measurements in the former and 461 in the latter. The data were sent to the Research Center of the CHLC which conducted the statistical analysis (ANOVA). The data were sent to the Centre for Research of the CHLC, EPE which proceeded to statistical analysis (ANOVA). This analysis revealed that the arterioles plexus of the mucosal and submucosal plexus of the cardia, fundus and region of the short gastric vessels, showed increased caliber in EG. The increase was statistically significant for being greater than 50% CG gauge. In the short gastric vessels, the difference was smaller, but persisted and statistically significant. Straight vessels were dilated at the base, on its emergence of the plexus serous only in the fundus. In the guinea pig, the Nissen procedure - complete fundoplication with ligation of the short gastric vessels - caused arteriolar vasodilation on the gastric fundus. I believe that this vasodilation constituted some accommodation to the modification introduced and infer that the same might happen in humans. I admit therefore that vasodilation also occurs in humans following the ligation of the short gastric vessels by microvascular analogy between the two species and that this vasodilation corresponds also to na adaptation mechanism arteriolar, for example, to compensate the loss incurred by ligation. The association of experimental ligation of the short gastric vessels with conducting complete fundoplication, which exerts increased pressure on the EGJ, not only did not cause a microcirculation deficit of the distal esophagus or proximal stomach as triggered a mechanism of fundic vasodilation which reinforces the security concept of the Nissen procedure for treatment of GERD.
Resumo:
Dissertação para obtenção do Grau de Mestre em Engenharia Química e Bioquímica
Resumo:
In this work, biocompatible and biodegradable poly(D-L-lactide-co-glycolide) (PLGA) microparticles with the potential for use as a controlled release system of vaccines and other drugs to the lung were manufactured using supercritical CO2, through the Supercritical Assisted Atomization (SAA) technique. After performing a controlled variance in production parameters (temperature, pressure, CO2/solution flow ratio) PLGA microparticles were characterized and later used to encapsulate active pharmaceutical ingredients (API). Bovine serum albumin (BSA) was chosen as model protein and vaccine, while sildenafil was the chosen drug to treat pulmonary artery hypertension and their effect on the particles characteristics was evaluated. All the produced formulations were characterized in relation to their morphology (Morphologi G3 and scanning electronic microscopy (SEM)), to their physical-chemical properties (X-ray diffraction (XRD, differential scanning calorimetry (DSC), Fourier transform infrared (FTIR)) and aerodynamic performance using an in vitro aerosolization study – Andersen cascade impactor (ACI) - to obtain data such as the fine particle fraction (FPF) and the mass median aerodynamic diameter (MMAD). Furthermore, pharmacokinetic, biodegradability and biocompatibility tests were performed in order to verify the particle suitability for inhalation. The resulting particles showed aerodynamic diameters between the 3 and 5 μm, yields up to 58% and FPF percentages rounding the 30%. Taken as a whole, the produced microparticles do present the necessary requests to make them appropriate for pulmonary delivery.
Resumo:
Micro/nano wrinkled patterns on cross-linked urethane/urea polymeric flexible free standing films with two soft segments, polypropylene oxide and polybutadiene, can be induced by UV-irradiation. The ability to write/erase these 3D structures, in a controlled manner, is the main focus of this work. The imprinting of the wrinkled structures was accomplished by swelling in an appropriate solvent followed by drying the membranes after the cross-linking process and UV irradiation. The surface tailoring of the elastomeric membranes was imaged by optical microscopy, scanning electronic microscopy and by atomic force microscopy. To erase the wrinkled structures the elastomers were swollen. The swelling as well as the sol/gel fraction and the UV radiation were tuned in order to control the wrinkles characteristics. It was found that the wrinkles wavelength, in the order of microns (1±0,25μm), was stamped by the UV radiation intensity and exposure time while the wrinkles' amplitude, in the order of nanometers (150-450 nm), was highly dependent on the swelling and sol/gel fraction. A prototype for volatile organic compounds detection was developed taking advantage of the unique 3D micro/nano wrinkles features.
Resumo:
Three different treatments were applied on several specimens of dolomitic and calcitic marble, properly stained with rust to mimic real situations (the stone specimens were exposed to the natural environment for about six months in contact with rusted iron). Thirty six marble specimens, eighteen calcitic and eighteen dolomitic, were characterized before and after treatment and monitored throughout the cleaning tests. The specimens were characterized by SEM-EDS (Scanning Electron Microscopy coupled with Energy Dispersion System), XRD (XRay Diffraction), XRF (X-Ray Fluorescence), FTIR (Fourier Transform Infrared Spectroscopy) and color measurements. It was also made a microscopic and macroscopic analysis of the stone surface along with the tests of short and long term capillary absorption. A series of test trials were conducted in order to understand which concentrations and contact times best suits to this purpose, to confirm what had been written to date in the literature. We sought to develop new methods of treatment application, skipping the usual methods of applying chemical treatments on stone substrates, with the use of cellulose poultice, resorting to the agar, a gel already used in many other areas, being something new in this area, which possesses great applicability in the field of conservation of stone materials. After the application of the best methodology for cleaning, specimens were characterized again in order to understand which treatment was more effective and less harmful, both for the operator and the stone material. Very briefly conclusions were that for a very intense and deep penetration into the stone, a solution of 3.5% of SDT buffered with ammonium carbonate to pH around 7 applied with agar support would be indicated. For rust stains in its initial state, the use of Ammonium citrate at a concentration of 5% buffered with ammonium to pH 7 could be applied more than once until satisfactory results appear.
Resumo:
Tissue engineering arises from the need to regenerate organs and tissues, requiring the development of scaffolds, which can provide an optimum environment for tissue growth. In this work, chitosan with different molecular weights was used to develop biodegradable 3D inverted colloidal crystals (ICC) structures for bone regeneration, exhibiting uniform pore size and interconnected network. Moreover, in vitro tests were conducted by studying the influence of the molecular weight in the degradation kinetics and mechanical properties. The production of ICC included four major stages: fabrication of microspheres; assembly into a cohesive structure, polymeric solution infiltration and microsphere removal. Chitosan’s degree of deacetylation was determined by infrared spectroscopy and molecular weight was obtained via capillary viscometry. In order to understand the effect of the molecular weight in ICC structures, the mass loss and mechanical properties were analyzed after degradation with lysozyme. Structure morphology observation before and after degradation was performed by scanning electron microscopy. Cellular adhesion and proliferation tests were carried out to evaluate ICC in vitro response. Overall, medium molecular weight ICC revealed the best balance in terms of mechanical properties, degradation rate, morphology and biological behaviour.
Resumo:
É sabido que devido à escassez de água potável, nomeadamente em países sub-desenvolvidos, morrem milhares de pessoas por ano, com a procura de fontes de água alternativas, que por sua vez se encontram contaminadas com microrganismos patogénicos; a este facto também se salienta a possibilidade de ocorrência de catástrofes naturais, tornando-se necessário o desenvolvimento de sistemas de desinfecção prácticos, de baixo custo e eficientes. O trabalho experimental desenvolvido focou-se nestas realidades, tendo por objectivo principal o desenvolvimento de um papel bactericida, em particular, um papel de baixo custo como é o caso do papel de filtro de café, para aplicação em desinfecção de água. Este papel foi funcionalizado com nanopartículas sintetizadas de prata, óxido de zinco e com ambas, assim como com nanopartículas comerciais, cuja caracterização foi feita por Microscopia Electrónica de Varrimento (SEM, Scanning Electron Microscopy), Energia Dispersiva de Raios-X (EDS, Energy-dispersive X-ray Spectroscopy), Espectroscopia de Ultravioleta-Visível (UV-VIS Uv-Visible Spectroscopy), Difracção de Raios-X (DRX, X-Rays Diffraction), Análise Termogravimétrica (TA, Thermal Analysis), e Calorimetria Diferencial de Varrimento (DSC, Differencial Scanning Calorimetry) e a actividade anti-bacteriana dos papéis foi avaliada através de Testes de Sensibilidade aos Antibióticos, pelo Método de Kirby-Bauer, contra as bactérias S.a.ATCC25923 e E.coli ATCC25922. No decorrer das sínteses variaram-se alguns parâmetros consoante o tipo de nanopartícula, para as np´s de prata variou-se essencialmente a metodologia de síntese e o tipo de redutor, para as np´s de óxido de zinco, dado ser um composto fotossensível, submeteu-se o papel á luz ultravioleta, o que, por outro lado também esterelizava o papel, e para ter uma comparação, esterelizou-se também o papel pela autoclave, constatando-se, pelas técnicas de caracterização, nomeadamente DRX, que os papeis não continham nanopartículas de óxido de zinco mas sim de acetato de zinco. Surpreendentemente, nos papéis autoclavados já se detectou a presença de óxido de zinco. Com os papéis que evidenciararam maior actividade anti-bacteriana realizaram-se filtrações de membrana com amostras de água contaminada e a determinação da concentração de metal no filtrado foi realizada pela técnica de Espectroscopia de Absorção Atómica de Chama (Flame Atomic Absorption Spectroscopy) conseguindo-se uma taxa de redução bacteriana de practicamente 100% para E.coli NCTC 9001 e E.f NCTC775 com os papéis contendo acetato de zinco numa concentração de 50 mM e np´sAg e acetato de zinco, numa concentração de 10 mM. De forma a validar o trabalho desenvolvido a parte final consistiu em testar os filtros com melhores propriedades em águas contaminadas, tendo esse trabalho sido feito no Laboratório de Água de Consumo dos Serviços Municipalizados de Água e Saneamento de Almada.
Resumo:
Shape memory alloys are characterized by the ability of recovering their initial shape after being deformed and by superelasticity. Since the discovery of these alloys, a new field of interest emerged not only for the scientific community but also to many industries. However, these alloys present poor machinability which constitute a constrain in the design of complex components for new applications. Thus, the demand for joining techniques able to join these alloys without compromising their properties became of great importance to enlarge the complexity of existing applications. Literature shows that these alloys are joined mainly using laser welding. In the present study, similar NiTi butt joints, were produced using TIG welding. The welds were performed in 1.5 mm thick plates across the rolling direction. A special fixture and gas assist device was designed and manufactured. Also a robot arm was adapted to accommodate the welding torch to assure the repeatability of the welding parameters. Welds were successfully achieved without macroscopic defects, such as pores and distortions. Very superficial oxidation was seen on the top surface due to insufficient shielding gas flow on the weld face. The welded joints were mechanically tested and structurally characterized. Testing methods were used to evaluate macro and microstructure, as well as the phase transformation temperatures, the mechanical single and cyclic behaviour and the shape recovery ability. Differential Scanning Calorimetry (DSC), Scanning Electron Microscopy (SEM), Energy Dispersive Spectroscopy (EDS), microhardness measurements were techniques also used to evaluate the welded joints. A depletion in Ni in the fusion zone was seen, as well as a shift in Ms temperature. For strain values of 4% the accumulated irrecoverable strain was of about 30% and increased with the strain imposed during cycling. Nevertheless, a complete recovery of initial shape was observed when testing the shape memory effect on a dedicated device that introduces a deformation of 6.7%. That is, the welding procedure does not remove the ability of the specimens to recover their initial shape.
Resumo:
This thesis reports the work performed in the optimization of deposition parameters of Multi – Walled Carbon Nanotubes (MWCNT) targeting the development of a Field Effect Transistors (FET) on paper substrates. The CNTs were dispersed in a water solution with sodium dodecyl sulphate (SDS) through ultrasonication, ultrasonic bath and a centrifugation to remove the supernatant and have a homogeneous solution. Several deposition tests were performed using different types of CNTs, dis-persants, papers substrates and deposition techniques, such as spray coating and inkjet printing. The characterization of CNTs was made by Scanning Electron Microscopy (SEM) and Hall Effect. The most suitable CNT coatings able to be used as semiconductor in FETs were deposited by spray coat-ing on a paper substrate with hydrophilic nanoporous surface (FS2) at 100 ºC, 4 bar, 10 cm height, 5 second of deposition time and 90 seconds of drying between steps (4 layers of CNTs were deposited). Planar electrolyte gated FETs were produced with these layers using gold-nickel gate, source and drain electrodes. Despite the small current modulation (Ion/Ioff ratio of 1.8) one of these devices have p-type conduction with a field effect mobility of 1.07 cm2/V.s.
Resumo:
This work presents the archaeometallurgical study of a group of metallic artefacts found in Moinhos de Golas site, Vila Real (North of Portugal), that can generically be attributed to Proto-history (1st millennium BC, Late Bronze Age and Iron Age). The collection is composed by 35 objects: weapons, ornaments and tools, and others of difficult classification, as rings, bars and one small thin bent sheet. Some of the objects can typologically be attributed to Late Bronze Age, others are of more difficult specific attribution. The archaeometallurgical study involved x-ray digital radiography, elemental analysis by micro-energy dispersive X-ray fluorescence spectrometry and scanning electron microscopy with energy dispersive spectroscopy, microstructural observations by optical microscopy and scanning electron microscopy. The radiographic images revealed structural heterogeneities frequently related with the degradation of some artefacts and the elemental analysis showed that the majority of the artefacts was produced in a binary bronze alloy (Cu-Sn) (73%), being others produced in copper (15%) and three artefacts in brass (Cu-Zn(-Sn-Pb)). Among each type of alloy there’s certain variability in the composition and in the type of inclusions. The microstructural observations revealed that the majority of the artefacts suffered cycles of thermo-mechanical processing after casting. The diversity of metals/alloys identified was a discovery of great interest, specifically due to the presence of brasses. Their presence can be interpreted as importations related to the circulation of exogenous products during the Proto-history and/or to the deposition of materials during different moments at the site, from the transition of Late Bronze Age/Early Iron Age (Orientalizing period) onwards, as during the Roman period.