Physico-chemical characterization of chars produced in the co-pyrolysis of wastes and possible routes of valorisation

Thesis submitted for the Degree in Master of Energy and Bioenergy

Food waste valorization through the production of polyhydroxyalkanoates by mixed microbial cultures

Dissertação para obtenção do Grau de Mestre em Engenharia Química e Bioquímica

Acetalização de glicerol e fenilacetaldeído assistida por pervaporação em reactor de membrana catalítica

Dissertação para obtenção do Grau de Mestre em Engenharia Química e Bioquímica

Study of the valorisation of the solid by-products obtained in the co-pyrolysis of different wastes

Dissertação para obtenção do grau de doutor em Energia e Bioenergia

Compact simulated countercurrent chromatography for downstream processing of (bio)pharmaceuticals

Dissertação para obtenção do Grau de Doutor em Engenharia Química e Bioquímica

Contribuição para o estudo da modelação da digestão anaeróbia de resíduos sólidos, estudo da influência da geometria do reactor na cinética do processo

O presente trabalho tem como objectivo contribuir para o estudo do desenvolvimento de um modelo matemático aplicado à digestão anaeróbia de resíduos sólidos, que incorpore os condicionamentos da geometria dos reactores e a sua influência na cinética do processo biológico. Nesse sentido, o trabalho propõe-se avaliar o comportamento cinético de três reactores, com o mesmo volume mas com diferentes relações tridimensionais, utilizando o mesmo substrato, e idênticos parâmetros ambientais e operacionais de funcionamento. Pretendeu-se estudar em que medida a relação do comprimento, largura e altura de um reactor pode interferir nas taxas de remoção de substrato, condicionando a respectiva difusão na biomassa e crescimento dos microrganismos. Considera-se que este aspecto é do maior interesse para o desenvolvimento de um modelo cinético, podendo minimizar desvios inerentes à própria modelação de processos biológicos complexos. A geometria do reactor, que se correlaciona com uma determinada relação tridimensional, pode constituir um parâmetro importante, que se designou por Kcig (Constante de Inibição Geométrica), dada a influência que poderá exercer na cinética do processo biológico. A sua avaliação, parametrização e consequente modelação, deverá facilitar a escolha da relação comprimento/largura/altura mais adequada, de forma a optimizar o funcionamento operacional do reactor. O plano experimental desenvolveu-se em duas fases, utilizando-se dois substratos com graus distintos de dificuldade de utilização pelos microrganismos, nomeadamente: Fase 1 (glucose), Fase 2 (FORSU e relva). Concluiu-se que a cinética do processo é influenciada pela relação entre as áreas de separação de biogás/biomassa (As) e de contacto biomassa/reactor (Ac), que interferem na geometria do reactor. Assim, através dos resultados das fases 1 e 2 pode observar-se que a variação da taxa de remoção de substrato se aproxima de uma função de saturação, pelo que se propõe uma adaptação do modelo de Monod, através de um formalismo que incorpora uma grandeza adimensional, Kcig, para reflectir o efeito da geometria do reactor. Verificou-se que a equação adoptada para Kcig se mostrou adequada, o que permitiu, através do modelo de Monod ajustado, estimar os valores de rx máx e Ks que se admite estarem mais próximos dos verdadeiros, embora se considere que apenas se pretende corrigi-los em função do efeito da geometria do reactor. Por outro lado, o estudo permitiu identificar um valor de Kcig para o reactor de 2,5 L, a partir do qual poderá não ser interessante a relação entre a taxa de remoção de substrato e a área de construção do reactor.

Metanólise de óleo de soja em biodiesel através de um reactor de membrana

Com o aumento das necessidades energéticas, bem como dos cada vez mais conhecidos efeitos nocivos dos combustíveis fósseis, tornou-se imperativo pesquisar e desenvolver alternativas sustentáveis e verdes a esses recursos. O biodiesel é considerado como o melhor substituto para o combustível diesel convencional de base petroquímica. A transesterificação de óleos vegetais revela-se como uma importante via de obtenção do biodiesel. Na produção de biodiesel com catalisadores básicos homogéneos, como o hidróxido de sódio, deparamo-nos com um problema na hidrólise de triglicéridos, levando à formação de sabões e emulsões. Mesmo quando são usados reagentes secos, há formação de água devido à reacção do hidróxido com o álcool. Estes problemas podem ser solucionados com a utilização de catalisadores heterogéneos. Este estudo incidiu na preparação de membranas catalíticas de álcool polivinílico (PVA) incorporadas com um catalisador heterogéneo sólido básico (óxido de cálcio) obtido de resíduos industriais (casca de ovo). Caracterizaram-se as membranas catalíticas através da determinação da espessura, ângulos de contacto, grau de inchamento e espectroscopia de infravermelho. As membranas de PVA foram testadas na metanólise de óleo de soja em reactor batch e reactor de membrana catalítica. Estudou-se o efeito da reticulação química e por irradiação gama, nas propriedades das membranas e na actividade catalítica.

Métodos inovadores para a bio-secagem do CDR produzido na linha de processo da unidade de Tratamento Mecânico e Biológico (TMB) – Caso de estudo na VALNOR SA

A presente dissertação foca-se em métodos inovadores para a bio-secagem do Combustível Derivado de Resíduos (CDR) produzido na linha de Tratamento Mecânico de Biológico (TMB), na VALNOR SA. O CDR representa 25 a 35% dos resíduos indiferenciados tratados numa unidade de TMB e que resulta do refugo e rejeitados retirados na linha de triagem mecânica e no processo de afinação do composto orgânico. O CDR pode ser utilizado como combustível alternativo ao combustível fóssil em centrais de co-geração e/ou cimenteiras. No caso da indústria cimenteira, a secagem do CDR é fundamental (a humidade média é de 40 a 50% e, terá de se reduzir para 20% ou inferior) de modo a aumentar o seu Poder Calorífico Inferior (PCI), para maior eficiência energética no processo produtivo nos fornos do clínquer e dar cumprimento à redução de utilização dos combustíveis fósseis que a União Europeia pretende. Com este trabalho, contribuiu-se com mais um passo no sentido de se viabilizarem as melhores opções técnico-ambientais e económicas para se cumprirem os objetivos prioritários no domínio da valorização dos resíduos passando a ser um recurso ou produto. Com efeito a substituição do combustível fóssil por um combustível alternativo do tipo do CDR não só se traduz em benefícios ambientais, nomeadamente a redução de deposição em aterro, a redução das emissões de Gases com Efeito de Estufa (GEE) e o cumprimento dos objetivos e metas do Plano Estratégico para os Resíduos Sólidos Urbanos (PERSU) 2020, como também enquadra evidentes vantagens económicas enquanto recurso alternativo e minimiza o valor do instrumento financeiro da Taxa de Gestão de Resíduos (TGR) que se prevê aumentar significativamente até 2020 no que respeita à deposição de resíduos/refugos/rejeitados em aterro.

Development of bio-batteries based on electrospun membranes

Fundação para a Ciência e a Tecnologia (FCT-MCTES) under the grant SFRH/BD/69306/2010

Phage display as a tool for generation of bio-therapeutic agents for breast cancer

Notch is a conserved signalling pathway, which plays a crucial role in a multiple cellular processes such as stem cell self-renewal, cell division, proliferation and apoptosis. In mammalian, four Notch receptors and five ligands are described, where interaction is achieved through their extracellular domains, leading to a transcription activation of different target genes. Increased expression of Notch ligands has been detected in several types of cancer, including breast cancer suggesting that these proteins represent possible therapeutic targets. The goal of this work was to generate quality protein targets and, by phage display technology, select function-blocking antibodies specific for Notch ligands. Phage display is a powerful technique that allows the generation of highly specific antibodies to be used for therapeutics, and it has also proved to be a reliable approach in identifying and validating new cancer-related targets. Also, we aimed at solving the tri-dimensional structure of the Notch ligands alone and in complex with selected antibodies. In this work, the initial phase focused on the optimization of the expression and purification of a human Delta-like 1 ligand mutant construct (hDLL1-DE3), by refolding from E. coli inclusion bodies. To confirm the biological activity of the produced recombinant protein cellular functional studies were performed, revealing that treatment with hDLL1-DE3 protein led to a modulation of Notch target genes. In a second stage of this study, Antibody fragments (Fabs) specific for hDLL1-DE3 were generated by phage display, using the produced protein as target, in which one good Fab candidate was selected to determine the best expression conditions. In parallel, multiple crystallization conditions were tested with hDLL1-DE3, but so far none led to positive results.

Bio-valorization of crude glycerol through polyhydroxyalkanoates production

Due to the prospective partial replacement of fossil fuels by biodiesel, its production has continuously grown in the last decade. The increase in global biodiesel production demands the development of sustainable applications of its main by-product, crude glycerol. In this thesis the feasibility of producing polyhydroxyalkanoates (PHA) by a mixed microbial community using crude glycerol as feedstock was investigated. Several incubation conditions were studied in order to maximize PHA production. The microbial population selected under aerobic dynamic feeding conditions had the ability to consume both major carbon fractions present in the crude, glycerol and methanol. Two biopolymers were stored, poly-3-hydroxybutyrate (PHB) and glucose biopolymer (GB), apparently using glycerol as the only carbon source for their production. The microbial enrichment obtained was able to accumulate up to 47% PHB of cell dry weight with a productivity of 0.24 g HA/L d. The overall PHA yield on total substrate consumed (0.32 g COD HB/g COD crude glycerol) was in the middle range of those reported in literature (0.08–0.58 g COD PHA/g COD real waste). The increase of temperature from 23ºC to 30ºC favored the culture fraction that accumulates glucose biopolymer with a maximum accumulation value of 25% of cell dry weight, which is an interesting value but not the main goal of this thesis. The fact that crude glycerol can be used to produce PHA without any pre-treatment step, makes the overall production process economically more competitive, reducing polymer final cost. This was the first study that demonstrates the valorization of the glycerol fraction present in the crude glycerol into PHA using an aerobic mixed microbial consortium.

Design of bio-inspired ionic liquids for protein stabilisation

Ionic Liquids (ILs) consist in organic salts that are liquid at/or near room temperature. Since ILs are entirely composed of ions, the formation of ion pairs is expected to be one essential feature for describing solvation in ILs. In recent years, protein - ionic liquid (P-IL) interactions have been the subject of intensive studies mainly because of their capability to promote folding/unfolding of proteins. However, the ion pairs and their lifetimes in ILs in P-IL thematic is dismissed, since the action of ILs is therefore the result of a subtle equilibrium between anion-cation interaction, ion-solvent and ion-protein interaction. The work developed in this thesis innovates in this thematic, once the design of ILs for protein stabilisation was bio-inspired in the high concentration of organic charged metabolites found in cell milieu. Although this perception is overlooked, those combined concentrations have been estimated to be ~300 mM among the macromolecules at concentrations exceeding 300 g/L (macromolecular crowding) and transient ion-pair can naturally occur with a potential specific biological role. Hence the main objective of this work is to develop new bio-ILs with a detectable ion-pair and understand its effects on protein structure and stability, under crowding environment, using advanced NMR techniques and calorimetric techniques. The choline-glutamate ([Ch][Glu]) IL was synthesized and characterized. The ion-pair was detected in water solutions using mainly the selective NOE NMR technique. Through the same technique, it was possible to detect a similar ion-pair promotion under synthetic and natural crowding environments. Using NMR spectroscopy (protein diffusion, HSQC experiments, and hydrogen-deuterium exchange) and differential scanning calorimetry (DSC), the model protein GB1 (production and purification in isotopic enrichment media) it was studied in the presence of [Ch][Glu] under macromolecular crowding conditions (PEG, BSA, lysozyme). Under dilute condition, it is possible to assert that the [Ch][Glu] induces a preferential hydration by weak and non-specific interactions, which leads to a significant stabilisation. On the other hand, under crowding environment, the [Ch][Glu] ion pair is promoted, destabilising the protein by favourable weak hydrophobic interactions , which disrupt the hydration layer of the protein. However, this capability can mitigates the effect of protein crowders. Overall, this work explored the ion-pair existence and its consequences on proteins in conditions similar to cell milieu. In this way, the charged metabolites found in cell can be understood as key for protein stabilisation.

Engineering bio-based polymers using alternative solvents and processes

The work presented in this thesis explores novel routes for the processing of bio-based polymers, developing a sustainable approach based on the use of alternative solvents such as supercritical carbon dioxide (scCO2), ionic liquids (ILs) and deep eutectic solvents (DES). The feasibility to produce polymeric foams via supercritical fluid (SCF) foaming, combined with these solvents was assessed, in order to replace conventional foaming techniques that use toxic and harmful solvents. A polymer processing methodology is presented, based on SCF foaming and using scCO2 as a foaming agent. The SCF foaming of different starch based polymeric blends was performed, namely starch/poly(lactic acid) (SPLA) and starch/poly(ε-caprolactone) (SPCL). The foaming process is based on the fact that CO2 molecules can dissolve in the polymer, changing their mechanical properties and after suitable depressurization, are able to create a foamed (porous) material. In these polymer blends, CO2 presents limited solubility and in order to enhance the foaming effect, two different imidazolium based ILs (IBILs) were combined with this process, by doping the blends with IL. The use of ILs proved useful and improved the foaming effect in these starch-based polymer blends. Infrared spectroscopy (FTIR-ATR) proved the existence of interactions between the polymer blend SPLA and ILs, which in turn diminish the forces that hold the polymeric structure. This is directly related with the ability of ILs to dissolve more CO2. This is also clear from the sorption experiments results, where the obtained apparent sorption coefficients in presence of IL are higher compared to the ones of the blend SPLA without IL. The doping of SPCL with ILs was also performed. The foaming of the blend was achieved and resulted in porous materials with conductivity values close to the ones of pure ILs. This can open doors to applications as self-supported conductive materials. A different type of solvents were also used in the previously presented processing method. If different applications of the bio-based polymers are envisaged, replacing ILs must be considered, especially due to the poor sustainability of some ILs and the fact that there is not a well-established toxicity profile. In this work natural DES – NADES – were the solvents of choice. They present some advantages relatively to ILs since they are easy to produce, cheaper, biodegradable and often biocompatible, mainly due to the fact that they are composed of primary metabolites such as sugars, carboxylic acids and amino-acids. NADES were prepared and their physicochemical properties were assessed, namely the thermal behavior, conductivity, density, viscosity and polarity. With this study, it became clear that these properties can vary with the composition of NADES, as well as with their initial water content. The use of NADES in the SCF foaming of SPCL, acting as foaming agent, was also performed and proved successful. The SPCL structure obtained after SCF foaming presented enhanced characteristics (such as porosity) when compared with the ones obtained using ILs as foaming enhancers. DES constituted by therapeutic compounds (THEDES) were also prepared. The combination of choline chloride-mandelic acid, and menthol-ibuprofen, resulted in THEDES with thermal behavior very distinct from the one of their components. The foaming of SPCL with THEDES was successful, and the impregnation of THEDES in SPCL matrices via SCF foaming was successful, and a controlled release system was obtained in the case of menthol-ibuprofen THEDES.