Production of ellagitannins concentrate by UF-NF from tropical highland blackberries

Dissertation presented to Faculdade de Ciências e Tecnologia, Universidade Nova de Lisboa for obtaining the master degree in Membrane Engineering

Cement-cork mortars for thermal bridges correction. Comparison with cement-EPS mortars performance

Construction and Building Materials 49 (2013), 315-327

Attitude change in arbitrarily large organizations

The alignment of collective goals and individual behavior has been extensively studied by economists under a principal-agent framework. Two main solutions have been presented: explicit incentive contracts and monitoring. These solutions correspond to changes in the objective situation faced by individuals. However, an extensive literature in social psychology provides evidence that behavior is influenced, not only by situational constraints, but also by attitudes. Therefore, an important aspect of organization is to choose the structures and procedures that best contribute to the dissemination of the desired attitudes throughout the organization. This paper studies how the initial configuration of attitudes and the size of the organization affect the optimal organizational structure and the timing of information flows when the objective is to align the members' attitudes. We identify and characterize three factors that affect the optimal organizational structures and procedures and the degree of alignment of attitudes: (1) clustering effects; (2) member cross-influence effects; and (3) leader cross-influence effects.

Target-specific multiphysics modeling for thermal medicine applications

Dissertation to obtain the degree of Doctor of Philosophy in Biomedical Engineering

Hub-and-spoke Interoperability: an out of the skies approach for large-scale data interoperability

Dissertação para obtenção do Grau de Doutor em Engenharia Electrotécnica e de Computadores

On the existence of pure-strategy equilibria in large games

Over the years, several formalizations and existence results for games with a continuum of players have been given. These include those of Schmeidler (1973), Rashid (1983), Mas-Colell (1984), Khan and Sun (1999) and Podczeck (2007a). The level of generality of each of these existence results is typically regarded as a criterion to evaluate how appropriate is the corresponding formalization of large games. In contrast, we argue that such evaluation is pointless. In fact, we show that, in a precise sense, all the above existence results are equivalent. Thus, all of them are equally strong and therefore cannot rank the different formalizations of large games.

New visualization model for large scale biosignals analysis

Benefits of long-term monitoring have drawn considerable attention in healthcare. Since the acquired data provides an important source of information to clinicians and researchers, the choice for long-term monitoring studies has become frequent. However, long-term monitoring can result in massive datasets, which makes the analysis of the acquired biosignals a challenge. In this case, visualization, which is a key point in signal analysis, presents several limitations and the annotations handling in which some machine learning algorithms depend on, turn out to be a complex task. In order to overcome these problems a novel web-based application for biosignals visualization and annotation in a fast and user friendly way was developed. This was possible through the study and implementation of a visualization model. The main process of this model, the visualization process, comprised the constitution of the domain problem, the abstraction design, the development of a multilevel visualization and the study and choice of the visualization techniques that better communicate the information carried by the data. In a second process, the visual encoding variables were the study target. Finally, the improved interaction exploration techniques were implemented where the annotation handling stands out. Three case studies are presented and discussed and a usability study supports the reliability of the implemented work.

Thermal performance of cool facades: evaluation by Infrared Thermography

High reflective paints (cool paints) are used on flat roofs to reduce heat gains from the incidence of solar radiation and thus improve the thermal comfort and energy efficiency of buildings, especially in summer periods. Given the application potential of these paints on vertical surfaces, a research study has been developed to evaluate the thermal performance of reflective paints on walls under real exposure conditions. Accordingly, different reflective paints have been applied as the final coating of an ETICS type solution, on the facades of a full scale experimental cell built at LNEC campus. For being applied in an ETICS system a paint has to fulfill several requirements, whether aesthetic or functional (such as the adhesion between the coating layers or the durability of the insulation), essential for its efficient performance. Since this construction coating system is subject to a prolonged sun exposure, various problems may arise, such as paint degradation or deterioration of the thermal insulation properties, particularly when dark colors are applied. To evaluate the thermal performance of the chosen paints, the method of non-destructive analysis by Infrared Thermography was used. Thermography allows knowing the temperature distribution of facades by measuring the radiation emitted by their surfaces. To complement the thermographic diagnosis, thermocouples were placed between the insulation and the paint system of the experimental cell. Additional laboratory tests allowed the characterization of the optical properties (reflectance and emittance) of the different reflective paints used in this study. The comparative analysis of the thermal performance of reflective and conventional paints revealed that the reflective paint allows a reduction of the facade surface temperature, reducing the risk of loss of insulating properties of the ETICS system and thus ensuring its longevity and functionality. The color of the paint used affects, naturally, the reflective ability of the surface and may have an important role in energy balance of the building. This paper also showed the potential of infrared thermography in the evaluation of the thermal performance of reflective paints.

Study of Helium II heat transport phenomena in superconducting rutherford type cables

This thesis is a study of how heat is transported in non-steady-state conditions from a superconducting Rutherford cable to a bath of superfluid helium (He II). The same type of superconducting cable is used in the dipole magnets of the Large Hadron Collider (LHC). The dipole magnets of the LHC are immersed in a bath of He II at 1.9 K. At this temperature helium has an extremely high thermal conductivity. During operation, heat needs to be efficiently extracted from the dipole magnets to keep their superconducting state. The thermal stability of the magnets is crucial for the operation of the LHC, therefore it is necessary to understand how heat is transported from the superconducting cables to the He II bath. In He II the heat transfer can be described by the Landau regime or by the Gorter-Mellink regime, depending on the heat flux. In this thesis both measurements and numerical simulation have been performed to study the heat transfer in the two regimes. A temperature increase of 8 2 mK of the superconducting cables was successfully measured experimentally. A new numerical model that covers the two heat transfer regimes has been developed. The numerical model has been validated by comparison with existing experimental data. A comparison is made between the measurements and the numerical results obtained with the developed model.

The thermal effects on the methanol-to-olefins reaction: A modelling and experimental approach

With the projection of an increasing world population, hand-in-hand with a journey towards a bigger number of developed countries, further demand on basic chemical building blocks, as ethylene and propylene, has to be properly addressed in the next decades. The methanol-to-olefins (MTO) is an interesting reaction to produce those alkenes using coal, gas or alternative sources, like biomass, through syngas as a source for the production of methanol. This technology has been widely applied since 1985 and most of the processes are making use of zeolites as catalysts, particularly ZSM-5. Although its selectivity is not especially biased over light olefins, it resists to a quick deactivation by coke deposition, making it quite attractive when it comes to industrial environments; nevertheless, this is a highly exothermic reaction, which is hard to control and to anticipate problems, such as temperature runaways or hot-spots, inside the catalytic bed. The main focus of this project is to study those temperature effects, by addressing both experimental, where the catalytic performance and the temperature profiles are studied, and modelling fronts, which consists in a five step strategy to predict the weight fractions and activity. The mind-set of catalytic testing is present in all the developed assays. It was verified that the selectivity towards light olefins increases with temperature, although this also leads to a much faster catalyst deactivation. To oppose this effect, experiments were carried using a diluted bed, having been able to increase the catalyst lifetime between 32% and 47%. Additionally, experiments with three thermocouples placed inside the catalytic bed were performed, analysing the deactivation wave and the peaks of temperature throughout the bed. Regeneration was done between consecutive runs and it was concluded that this action can be a powerful means to increase the catalyst lifetime, maintaining a constant selectivity towards light olefins, by losing acid strength in a steam stabilised zeolitic structure. On the other hand, developments on the other approach lead to the construction of a raw basic model, able to predict weight fractions, that should be tuned to be a tool for deactivation and temperature profiles prediction.

Differences and reasons in IASB accounting standards between small and large companies

This paper studies the main differences in accounting standards of the International Accounting Standards Board (IASB) between small and large companies, materialised in the dissimilarities between the International Financial Reporting Standard for Small and Medium-sized Entities and the full International Financial Reporting Standards, as of 2010. Another element of this project is the analysis of the reasons behind the differences between the two aforementioned frameworks, which intends to expose the rationale and the mindset that led to an adaptation of the full standards in a stand-alone document designed for small companies.

The financial leverage of large Portuguese Firms in the European context

The Financial Leverage of Large Portuguese Firms in the European Context This paper studies the leverage, cost of debt servicing ability and structure of debt maturity of large Portuguese firms, over the pre-crisis (2006-2009) and post-crisis (2010-2013) periods through a comparative analysis with other European peers. We document that large Portuguese firms have been reducing their leverage since the end of 2009. We find that this decrease in leverage is not a consequence higher Equity levels but rather a result of asset’s downsizing. We also document that Portuguese firms are still more leveraged than their European peers, even though this difference has decreased over time. High corporate debt levels are transversal across industries.