POST-PROCESSING TECHNIQUES SUITABILITY FOR MESOLEVEL FREE BOUNDARY FLOWS

Reliable flow simulation software is inevitable to determine an optimal injection strategy in Liquid Composite Molding processes. Several methodologies can be implemented into standard software in order to reduce CPU time. Post-processing techniques might be one of them. Post-processing a finite element solution is a well-known procedure, which consists in a recalculation of the originally obtained quantities such that the rate of convergence increases without the need for expensive remeshing techniques. Post-processing is especially effective in problems where better accuracy is required for derivatives of nodal variables in regions where Dirichlet essential boundary condition is imposed strongly. In previous works influence of smoothness of non-homogeneous Dirichlet condition, imposed on smooth front was examined. However, usually quite a non-smooth boundary is obtained at each time step of the infiltration process due to discretization. Then direct application of post-processing techniques does not improve final results as expected. The new contribution of this paper lies in improvement of the standard methodology. Improved results clearly show that the recalculated flow front is closer to the ”exact” one, is smoother that the previous one and it improves local disturbances of the “exact” solution.

Post-processing Techniques in Free Boundary Flows during Liquid Composite Moulding Processes

Post-processing a finite element solution is a well-known technique, which consists in a recalculation of the originally obtained quantities such that the rate of convergence increases without the need for expensive remeshing techniques. Postprocessing is especially effective in problems where better accuracy is required for derivatives of nodal variables in regions where Dirichlet essential boundary condition is imposed strongly. Consequently such an approach can be exceptionally good in modelling of resin infiltration under quasi steady-state assumption by remeshing techniques and with explicit time integration, because only the free-front normal velocities are necessary to advance the resin front to the next position. The new contribution is the post-processing analysis and implementation of the freeboundary velocities of mesolevel infiltration analysis. Such implementation ensures better accuracy on even coarser meshes, which in consequence reduces the computational time also by the possibility of employing larger time steps.

Environmental indicator frameworks to design and assess environmental monitoring programs

Impact Assessment and Project Appraisal, vol. 22, n.1, March 2004, p. 47–62

Supporting On-Line Distributed Monitoring and Debugging

Monitoring systems have traditionally been developed with rigid objectives and functionalities, and tied to specific languages, libraries and run-time environments. There is a need for more flexible monitoring systems which can be easily adapted to distinct requirements. On-line monitoring has been considered as increasingly important for observation and control of a distributed application. In this paper we discuss monitoring interfaces and architectures which support more extensible monitoring and control services. We describe our work on the development of a distributed monitoring infrastructure, and illustrate how it eases the implementation of a complex distributed debugging architecture. We also discuss several issues concerning support for tool interoperability and illustrate how the cooperation among multiple concurrent tools can ease the task of distributed debugging.

Advanced image processing techniques for detection and quantification of drusen

Dissertation presented to obtain the degree of Doctor of Philosophy in Electrical Engineering, speciality on Perceptional Systems, by the Universidade Nova de Lisboa, Faculty of Sciences and Technology

Downstream processing development of enveloped viruses for clinical applications: innovative tools for rational process optimization

Dissertation presented to obtain a Ph.D. degree in Engineering and Technology Sciences, Biotechnology at the Instituto de Tecnologia Química e Biológica, Universidade Nova de Lisboa

Modern techniques for constraint solving the CASPER experience

Dissertação apresentada para obtenção do Grau de Doutor em Engenharia Informática, pela Universidade Nova de Lisboa, Faculdade de Ciências e Tecnologia

Gestão de bloco operatório : modelos de gestão e monitorização

RESUMO - A consciência de uma necessidade clara em rentabilizar a capacidade instalada e os meios tecnológicos e humanos disponíveis no Bloco Operatório e face ao imperativo de um cabal desempenho e de uma adequada efectividade nestes serviços levou-nos à realização deste estudo. Objectivos: O trabalho de projecto centrou-se em quatro objectivos concretos: Elaboração de uma grelha de observação de Modelos de Gestão de Bloco Operatório; Observação de seis Modelos de Gestão de Blocos Operatórios em experiências nacionais e in-loco, de acordo com a grelha de observação; Avaliação da qualidade gestionária na amostra seleccionada à luz dos modelos existentes; Criação de uma grelha de indicadores para a monitorização e avaliação do Bloco Operatório. Metodologia: Na elaboração da grelha de observação dos Blocos Operatórios recorremos a um grupo de peritos, à bibliografia disponível e à informação recolhida em entrevistas. Aplicámos a grelha de observação aos seis Blocos Operatórios e analisámos as informações referentes a cada modelo com a finalidade de encontrar os pontos-chave que mais se destacavam em cada um deles. Para a elaboração da grelha de indicadores de monitorização do Bloco Operatório realizámos uma reunião recorrendo à técnica de grupo nominal para encontrar o nível de consenso entre os peritos. Resultados: Criámos uma grelha de observação de Modelos de Gestão de Bloco Operatório que permite comparar as características de gestão. Esta grelha foi aplicada a seis Blocos Operatórios o que permitiu destacar como elementos principais e de diferenciação: o sistema de incentivos implementado; o sistema informático, de comunicação entre os serviços e de débito directo dos gastos; a existência de uma equipa de gestão de Bloco Operatório e de Gestão de Risco; a importância de um planeamento cirúrgico semanal e da existência de um regulamento do Bloco Operatório. Desenhámos um painel de indicadores para uma monitorização do Bloco Operatório, de onde destacamos: tempo médio de paragem por razões técnicas, tempo médio de paragem por razões operacionais, tempo médio por equipa e tempo médio por procedimento. Considerações finais: Os Blocos Operatórios devem ponderar a existência das componentes mais importantes dos Modelos, bem como recolher exaustivamente indicadores de monitorização. A investigação futura deverá debruçar-se sobre a relação entre os indicadores de monitorização e os Modelos de Gestão, recorrendo à técnicas de benchmarking. -------------------ABSTRACT - This study was driven by the need to optimise available capacity, technology and human resources in the Operating Room and to address the corresponding goals of adequate performance and effectiveness. Objectives: This project focuses on four specific objectives: development of an observation grid of operating room management models; in-loco observation and documentation of six national operating room, according to the grid; assess the quality of management in the selected sample relative to existing management models; create a set of indicators for monitoring and evaluating operating rooms. Methodology: The design of the observation grid was based on experts’ consultation, a literature survey and information gathered in various interviews. The observation grid was applied to six operating rooms and the information for each management model was analysed in order to find its key characteristics. We used the Nominal Group Technique in order to develop a set of indicators for monitoring and evaluating operating rooms. Results: An observation grid was created for operating rooms management models, which allowed comparing management characteristics. This grid was applied to six operating rooms allowing disentangle its main features and differentiating characteristics: implementation of incentive systems; IT systems including information flow between services; inventory and expense management; existence of a management team and effective risk management; importance of weekly planning and regulations. We designed a set control indicators, whose major characteristics are the following: the average down time due to technical reasons, the average down time due to operational reasons, the average time per team and the average time per procedure. Final Conclusions: Operating rooms should consider the most relevant characteristics of management models and collect exhaustive information on control indicators. Future research should be devoted to assessing the operating room performance according to management models, using control indicators and benchmarking techniques.

Genotoxic effects in occupational exposure to formaldehyde: A study in anatomy and pathology laboratories and formaldehyde-resins production

ABSTRACT – Background: According to the Report on Carcinogens, formaldehyde ranks 25th in the overall U.S. chemical production, with more than 5 million tons produced each year. Given its economic importance and widespread use, many people are exposed to formaldehyde environmentally and/or occupationally. Presently, the International Agency for Research on Cancer classifies formaldehyde as carcinogenic to humans (Group 1), based on sufficient evidence in humans and in experimental animals. Manyfold in vitro studies clearly indicated that formaldehyde can induce genotoxic effects in proliferating cultured mammalian cells. Furthermore, some in vivo studies have found changes in epithelial cells and in peripheral blood lymphocytes related to formaldehyde exposure. Methods: A study was carried out in Portugal, using 80 workers occupationally exposed to formaldehyde vapours: 30 workers from formaldehyde and formaldehyde-based resins production factory and 50 from 10 pathology and anatomy laboratories. A control group of 85 non-exposed subjects was considered. Exposure assessment was performed by applying simultaneously two techniques of air monitoring: NIOSH Method 2541 and Photo Ionization Detection equipment with simultaneously video recording. Evaluation of genotoxic effects was performed by application of micronucleus test in exfoliated epithelial cells from buccal mucosa and peripheral blood lymphocytes. Results: Time-weighted average concentrations not exceeded the reference value (0.75 ppm) in the two occupational settings studied. Ceiling concentrations, on the other hand, were higher than reference value (0.3 ppm) in both. The frequency of micronucleus in peripheral blood lymphocytes and in epithelial cells was significantly higher in both exposed groups than in the control group (p < 0.001). Moreover, the frequency of micronucleus in peripheral blood lymphocytes was significantly higher in the laboratories group than in the factory workers (p < 0.05). A moderate positive correlation was found between duration of occupational exposure to formaldehyde (years of exposure) and micronucleus frequency in peripheral blood lymphocytes (r = 0.401; p < 0.001) and in epithelial cells (r = 0.209; p < 0.01). Conclusions: The population studied is exposed to high peak concentrations of formaldehyde with a long-term exposure. These two aspects, cumulatively, can be the cause of the observed genotoxic endpoint effects. The association of these cytogenetic effects with formaldehyde exposure gives important information to risk assessment process and may also be used to assess health risks for exposed worker

Archaeological roman glasses: comparative characterisation by non-destructive analytical techniques

Dissertation presented in fulfilment of the requirements for the Master’s degree in Conservation and Restoration

Embolização das artérias prostáticas no tratamento da hiperplasia benigna da próstata : estudo anátomo-clínico

Resumo: A hiperplasia benigna da próstata (HBP) tem elevada prevalência nos homens entre os 50 e 79 anos de idade, sendo ubiquitária com o envelhecimento. Devido à significativa morbi-mortalidade associada aos tratamentos médicos e cirúrgicos currentemente disponíveis, são necessárias novas tecnologias para melhorar os resultados e minimizar o desconforto dos doentes. Recentemente, estudos preliminares de experimentação animal e em 3 doentes tratados, sugeriram a embolização arterial prostática selectiva (EAPS) como hipótese terapêutica para a HBP. Decidimos investigar se a EAPS poderia ser um procedimento bem sucedido no tratamento da HBP gravemente sintomática. Para tal realizámos um estudo anátomo-radiológico e clínico em 63 doentes com recurso a uma terapêutica inovadora minimamente invasiva guiada pela imagem. Avaliámos 126 hemipélvis com recurso a Angio-RM, Angio-TC e Angiografia Digital de Subtracção, com o intuito de definir os padrões básicos de bifurcação das artérias ilíacas internas até agora apenas descritos em estudos cadavéricos. Estudámos ainda o suprimento vascular arterial prostático, identificando: 1 as artérias prostáticas; 2 origem e direcção; 3 os ramos intra-prostáticos; 4 anastomoses com outras artérias. Em relação aos resultados anatómicos, identificámos 181 artérias prostáticas, já que em 43.7% das hemipélvis existiam dois pedículos arteriais prostáticos com origens independentes. A origem mais frequente foi a artéria pudenda interna (39.7%), seguida do tronco comum glúteo-pudendo (21%) e da artéria vesical superior (18.2%). Origens menos frequentes foram a artéria obturadora (12.1%), as artérias glúteas inferior (3.9%)ou superior (1.7%), ramos rectais provenientes da artéria mesentérica inferior (1.7%) e a artéria pudenda acessória (1.7%). Identificaram-se anastomoses com as artérias adjacentes em 57.9% dos casos: com a terminação da artéria pudenda interna (41.6%),artérias prostáticas contra-laterais (18.2%) e homo-laterais (11.7%), com ramos rectais (15.6%) e com artérias vesicais (12.9%). Em relação ao estudo clínico tratámos 63 doentes (idades compreendidas entre 52 - 82 anos, média 69.5 anos) com HBP gravemente sintomática refractária à terapêutica médica há mais de 6 meses. Foi possível avaliação após o tratamento em 37 doentes: média de seguimento de 4.7 meses (variando entre 1 e 12 meses). A EAPS unilateral foi possível em todos os doentes, com embolização bilateral em 73% dos casos. A embolização bilateral não foi possível em 27% dos casos devido a tortuosidade, alterações ateroescleróticas e pequeno calibre das artérias ilíacas e/ou prostáticas. Em média houve uma melhoria do International Prostate Symptom Score (IPSS) de 10.8 pontos, da QoL de 1.5 pontos e do Internationl Index of Erectile Function (IIEF) de 2.1 pontos. Houve uma redução média do PSA de 30% (2.4 ng/mL), um aumento do pico de fluxo urinário (Qmax) de 3.1 - 3.85 mL/s e uma redução média do volume prostático de 21% (18.5 mL). Registou-se uma complicação major: pequena área de isquémia da parede vesical tratada cirurgicamente. Em 75% dos doentes tratados obteve-se sucesso clínico com franca melhoria dos sintomas, enquanto 25% dos doentes foram considerados insucesso clínico por se ter registado uma fraca ou ausente melhoria sintomática após a embolização. Os restantes doentes tratados estão sob controlo evolutivo, pararam toda a medicação prostática, sem qualquer caso de disfunção sexual associada com o tratamento. Este trabalho constitui o primeiro estudo anatómico descritivo in vivo das artérias prostáticas, conseguido devido à utilização de técnicas de imagem nunca usadas para este fim. O uso clínico dos dados anatómicos acima referidos permitiu a implementação de técnicas de Radiologia de Intervenção no tratatamento de uma doença de elevada prevalência. ------------------------------- ABSTRACT: Benign prostatic hyperplasia (BPH) has high prevalence in men aged 50–79 years being ubiquitous with aging. Due to significant morbi-mortality associated with currently available medical and surgical treatments, there is the need for innovative technologies to continue to improve outcomes and minimize patient discomfort and morbidity. Recently, prostatic arterial embolization (PAE) was suggested as a treatmentoption for BPH based on preliminary results from animal studies and 3 treated patients. We decided to investigate if PAE might be a successful treatment option for severely symptomatic BPH patients. We performed a clinical and anatomical-radiological study in 63 patients with the use of an inovative image-guided minimally invasive technique. We evaluated 126 pelvic sides using Angio-MR or Angio-CT and Catheter Angiography before embolisation to treat symptomatic BPH. We aimed to define the main branching patterns of the male internal iliac arteries, so far only studied in the cadaver. We also evaluated the prostatic arterial supply, identifying: 1 the prostatic arteries; 2 origin and direction; 3 intra-prostatic branches; 4 anastomoses with surrounding arteries. Regarding the anatomical study we identified 181 prostatic arteries, because in 43.7% of pelvic sides 2 separate prostatic vascular pedicles were found. The most frequent origin was the internal pudendal artery (39.7%) with the common glutealpudendal trunk (21%) and superior vesical arteries (18.2%) the next commonest. Less frequent origins were the obturator artery (12.1%), the inferior (3.9%) or superior (1.7%) gluteal arteries, rectal branches from the inferior mesenteric artery (1.7%) and the accessory pudendal artery (1.7%). There were anastomoses with the surrounding arteries in 57.9% of cases: termination of the internal pudendal artery (41.6%), contralateral prostatic arteries (18.2%), same-side prostatic arteries (11.7%), rectal branches (15.6%), and vesical arteries (12.9%).Regarding the clinical study, we treated 63 patients aged 52–82 years (mean 69.5 years) who presented with symptomatic BPH refractory to medical treatment for at least 6 months. Follow-up evaluation (mean 4.7 months, range 1-12 months) was possible in 37 patients. PAE was achieved in all patients with bilateral embolization in 73%. In 27% PAE was performed unilaterally due to tortuosity, atherosclerotic changes and small size of iliac and prostatic arteries. There was a mean decrease in the IPSS of 10.8 points, a mean improvement in QoL of 1.5 points, and a mean increase in the sexual function score of 2.1 points. There was a mean PSA reduction of 30% (2.4 ng/mL), a Qmax increase of 3.1 to 3.85 mL/sec, and a mean prostate volume decrease of 21% (18.5 mL). There was one major complication: a small area of bladder wall ischemia treated by surgery. Overall, 75% of patients were considered clinical success with major improvement after PAE, while 25% of patients were considered clinical failure with little or no improvement after PAE. All remaining patients are under follow-up, stopped all prostatic medication, and reported no sexual dysfunction. This study is the first one to describe the radiological anatomy of the prostatic arteries, with the use of imaging techniques never used for this purpose before. The clinical use of the anatomical findings allowed the implementation of Interventional Radiology tehniques in the treatment of a disease with a high prevalence.

Measurement of lead concentration in biological tissues by atomic spectroscopy techniques

Dissertation for the degree of Doctor of Philosophy in Physics

Active cycle breathing techniques como técnica de higiene brônquica na asma: estudo piloto

RESUMO: Relevância e Objectivos: O objectivo deste estudo consistiu em verificar a eficácia e segurança de uma técnica de higiene brônquica – Active Cycle breathing technique (ACBT), na remoção de secreções e desinsuflação em crianças asmáticas. É uma técnica recente, que ainda não foi estudada nesta população. Metodologia: A amostra foi constituída por um total de 14 crianças, com idades compreendidas entre os 6 e 18 anos, com o diagnóstico de asma. Foi dividida em dois grupos: grupo de controlo, constituído por asmáticos estáveis e grupo experimental constituído por asmáticos pós-crise. Ambos receberam o mesmo tratamento, que consistiu numa única sessão de ACBT. Realizaram um exame da função respiratória (variáveis FEV1, PEF, MEF75%, RV e FRC) antes e após a aplicação da técnica. Mediu-se a Saturação de O2 antes, a meio e no fim da aplicação da técnica. Por último, pesaram-se as secreções recolhidas durante a sessão de tratamento. Resultados: Como resultados, quando omparamos o antes e após aplicação do ACBT, obtivemos diferenças significativas no RV (p <0,05) e FRC (p <0,05); muito significativa na Sa02 (p <0,01) e peso de secreções, nos asmáticos pós crise. Ocorreu uma melhoria significativa da saturação (p <0,05) em asmáticos estáveis, não havendo secreções. Não houve efeitos adversos nem broncoespasmo em ambos os grupos.Conclusão: O ACBT é uma técnica que promove a remoção de secreções e diminuição da insuflação na população de asmáticos.--------------------ABSTRACT:Relevance and Goals: the goal of this study was to verify the efficiency and security of a bronchial hygienic technique - Active Cycle Breathing Technique (ACBT) – in the obstruction and insufflation of asthmatic children. This is a new technique that has not yet been studied in this population. Procedures: The subjects were 14 children aged between 6 and 18 years old with asthma diagnosis. They were divided in two groups: the control group with stable asthmatics and the experimental group with post-crisis asthmatics. Both received the same treatment that was a single session of ACBT. They made a lung function test before and after the application of the technique (variables FEV1, PEF, MEF75%, RV and FRC). The level of O2 saturation was measured before, during and after the procedure. In the end, the secretions collected during the treatment were weighted. Results: We observed a significant difference on RV (p ˂0,05), FRC (p ˂0,05), Sa02 (p ˂0,01) and in the weight of the secretions in the post-crisis asthmatics after ACBT. There was a significant improvement of saturation (p ˂0,05) only in the stable asthmatics. There were no adverse effects or bronchospasm in both groups.

Monitoring morphisms to support sustainable interoperability of enterprise systems

Dissertation to obtain the Master degree in Electrical Engineering and Computer Science