Providing energy efficiency location-based strategies for buildings using linked open data

Dissertation submitted in partial fulfillment of the requirements for the Degree of Master of Science in Geospatial Technologies.

Acquisition of Horizon Wind Energy by EdP

A Work Project, presented as part of the requirements for the Award of a Masters Degree in Finance from the NOVA – School of Business and Economics

Em0ve innovative-technologies, Lda

A Work Project, presented as part of the requirements for the Award of a Masters Degree in Management from the NOVA – School of Business and Economics

EDP - the making of a global green brand

A Work Project, presented as part of the requirements for the Award of a Masters Degree in Management from the NOVA – School of Business and Economics

Efeito da aplicação de águas residuais na produtividade e na qualidade de três genótipos de Miscanthus

Dissertação para obtenção do Grau de Mestre em Energia e Bioenergia

Thermo-hydro-mechanical analysis of CO2 injection into deep aquifers

One of the biggest challenges for humanity is global warming and consequently, climate changes. Even though there has been increasing public awareness and investments from numerous countries concerning renewable energies, fossil fuels are and will continue to be in the near future, the main source of energy. Carbon capture and storage (CCS) is believed to be a serious measure to mitigate CO2 concentration. CCS briefly consists of capturing CO2 from the atmosphere or stationary emission sources and transporting and storing it via mineral carbonation, in oceans or geological media. The latter is referred to as carbon capture and geological storage (CCGS) and is considered to be the most promising of all solutions. Generally it consists of a storage (e.g. depleted oil reservoirs and deep saline aquifers) and sealing (commonly termed caprock in the oil industry) formations. The present study concerns the injection of CO2 into deep aquifers and regardless injection conditions, temperature gradients between carbon dioxide and the storage formation are likely to occur. Should the CO2 temperature be lower than the storage formation, a contractive behaviour of the reservoir and caprock is expected. The latter can result in the opening of new paths or re-opening of fractures, favouring leakage and compromising the CCGS project. During CO2 injection, coupled thermo-hydro-mechanical phenomena occur, which due to their complexity, hamper the assessment of each relative influence. For this purpose, several analyses were carried out in order to evaluate their influences but focusing on the thermal contractive behaviour. It was finally concluded that depending on mechanical and thermal properties of the pair aquifer-seal, the sealing caprock can undergo significant decreases in effective stress.

Racionalização do mecanismo de adição de compostos carbonílicos a vinil-mono e di-sulfonas, catalisada por aminas

As sulfonas são conhecidas pelos químicos orgânicos pela sua versatilidade sintética e actividade biológica, nomeadamente os fármacos conhecidos por sulfa drugs, extremamente importantes em química medicinal. As vinil-sulfonas constituem uma sub-família das sulfonas e têm demonstrado ao longo do tempo a sua capacidade de inibir diversos processos enzimáticos, introduzindo propriedades biológicas únicas. Do ponto de vista sintético, o método mais directo para obter estes compostos é via redução dos produtos de adição de Michael a vinil-di-sulfonas, o que não é favorável em termos de economia de átomos. Por outro lado, o mecanismo da reacção de adição de Michael de compostos carbonílicos a vinil-sulfonas tem levantado algumas dúvidas, devido à existência de dois possíveis mecanismos reacionais. O objectivo principal desta dissertação é racionalizar o mecanismo de adição de compostos carbonílicos a vinil-mono e di-sulfonas, recorrendo a estudos teóricos de DFT e experimentais, incluindo RMN. Foram considerados os mecanismos via intermediário enamina e via catálise básica, e através de estudos de RMN foi possível retirar conclusões sobre as velocidades relativas das reacções, bem como meio de comprovar a formação de alguns produtos. Os resultados teóricos obtidos revelam que, para as mono-sulfonas, o mecanismo via enamina é mais favorável energeticamente. No entanto, a existência de reacções competitivas de energia de activação mais baixa não permitem obter o produto desejado. Para eliminar estas reacções, utilizam-se aminas terciárias e a reacção segue um mecanismo via catálise básica. O estudo dos coeficientes da orbital HOMO dos compostos carbonílicos revelou que a localização do enol é um factor determinante para estas reacções. Por outro lado, os resultados obtidos revelaram que as di-sulfonas sendo extremamente reactivas, podem adoptar qualquer um dos caminhos reacionais, em função do catalisador escolhido, e não são sensíveis ao substrato. Neste caso, as reacções competitivas que ocorrem são reversíveis,e o produto de adição conjugada é sempre favorecido. Estudou-se ainda, teoricamente, a reacção de adição a mono-sulfonas de forma intramolecular, que apresenta claramente um mecanismo via enamina, cuja energia de activação é mais baixa que a respectiva adição competitiva.

Dynamic stiffness of the piled foundation of a onshore wind turbine

One of today's biggest concerns is the increase of energetic needs, especially in the developed countries. Among various clean energies, wind energy is one of the technologies that assume greater importance on the sustainable development of humanity. Despite wind turbines had been developed and studied over the years, there are phenomena that haven't been yet fully understood. This work studies the soil-structure interaction that occurs on a wind turbine's foundation composed by a group of piles that is under dynamic loads caused by wind. This problem assumes special importance when the foundation is implemented on locations where safety criteria are very demanding, like the case of a foundation mounted on a dike. To the phenomenon of interaction between two piles and the soil between them it's given the name of pile-soil-pile interaction. It is known that such behavior is frequency dependent, and therefore, on this work evaluation of relevant frequencies for the intended analysis is held. During the development of this thesis, two methods were selected in order to assess pile-soil-pile interaction, being one of analytical nature and the other of numerical origin. The analytical solution was recently developed and its called Generalized pile-soil-pile theory, while for the numerical method the commercial nite element software PLAXIS 3D was used. A study of applicability of the numerical method is also done comparing the given solution by the nite element methods with a rigorous solution widely accepted by the majority of the authors.

Divulgar ciência para diferentes públicos. Uma experiência no projeto STOL - Science Through Our Lives

O estágio que aqui se relata enquadra-se no âmbito do mestrado em Comunicação de Ciência, da Faculdade de Ciências Sociais Humanas (FCSH) da Universidade Nova de Lisboa (UNL) e do Instituto de Tecnologia Química e Biológica (ITQB). Foi realizado no projeto STOL – Science Through Our Lives, do Centro de Biologia Molecular e Ambiental (CBMA) da Escola de Ciências da Universidade do Minho (ECUM), e teve a duração de três meses. Esta componente prática do mestrado permitiu desenvolver um trabalho in loco, com o objetivo de servir, sobretudo, a comunicação de ciência informal. As principais atividades desenvolvidas foram exposições (Homo numericus; “Ponto a Ponto Enche a Ciência o Espaço), produção de materiais educativos (Objetos Educativos para a Casa das Ciências), campanhas de sensibilização (Comemoração do Dia Mundial da Água), auscultação do público (Vox Pop), crónicas de jornal (coluna “Aqui há Ciência”) e estabelecimento de parcerias estratégicas entre o STOL e outras forças vivas da região (AVianense e “Diário do Minho”). Ao integrar as atividades a decorrer no projeto STOL, foi possível contribuir com sugestões e novos materiais, e implementar projetos cujo principal objetivo foi o contacto direto com o público. De todo o trabalho se obteve um feedback positivo, conforme se documenta neste relatório e respetivos anexos. Se alguns constrangimentos podem ser enunciados (falta de recursos económicos e humanos, fraca tradição de envolvimento da população com a ciência e vice-versa, e a considerável falta de apoio institucional a atividades de divulgação de ciência), também devem ser evidenciados aspetos muito positivos como a dinâmica do grupo STOL, a capacidade de envolver diferentes públicos nas suas atividades, diferenciar estratégias para esses grupos, e finalmente, avaliar, sempre que possível, o seu desempenho, incluindo os resultados nas atividades seguintes. Neste contexto foram aplicados os conhecimentos adquiridos durante o primeiro ano curricular do mestrado, permitindo o ganho de experiência na área de trabalho onde a autora se sente realizada e pretende permanecer.

EL PAISAJE Y LA TRANSICIÓN ENERGÉTICA: COMPARANDO EL SURGIMIENTO DE PAISAJES DE ENERGÍA EÓLICA EN FRANCIA, ALEMANIA Y PORTUGAL

Due to the global acceptance of the reality of global warming, ever more countries are in the process of implementing alternative energies such as wind power. In this article, we focus on the transformation of space as a consequence of these newly established alternative energy policies. Landscapes are the level at which political visions and policy decisions endorse (or not) their very materiality. We analyze the deployment of wind power in three European countries, France, Germany and Portugal through the lens of ethnographic landscape studies. We argue that the successful implementation of low carbon futures is highly dependent on the respective national cultures of administration as well as on local practices, initiatives and perceptions of space at the local level. In each of the countries under scrutiny, we analyze the way in which wind power and landscape issues are framed, we point at potential tensions and explore how these are overcome (or not) at the local level so as to give way for the emergence of (new) wind power landscapes. We compare the role played by landscape cultures, institutions or practices in the development and resolution of tensions over the deployment of wind energy.

Electron driven reactions in sulphur containing biological prototypes

The interaction of ionising radiation with living tissues may direct or indirectly generate several secondary species with relevant genotoxic potential. Due to recent findings that electrons with energies below the ionisation threshold can effectively damage DNA, radiation-induced damage to biological systems has increasingly come under scrutiny. The exact physico-chemical processes that occur in the first stages of electron induced damage remain to be explained. However, it is also known that free electrons have a short lifetime in the physiological medium. Hence, electron transfer processes studies represent an alternative approach through which the role of "bound" electrons as a source of damage to biological tissues can be further explored. The thesis work consists of studying dissociative electron attachment (DEA) and electron transfer to taurine and thiaproline. DEA measurements were executed in Siedlce University with Prof. Janina Kopyra under COST action MP1002 (Nanoscale insights in ion beam cancer therapy). The electron transfer experiments were conducted in a crossed atom(potassium)-molecule beam arrangement. In these studies the anionic fragmentation patterns were obtained. The results of both mechanisms are shown to be significantly different, unveiling that the damaging potential of secondary electrons can be underestimated. In addition, sulphur atoms appear to strongly influence the dissociation process, demonstrating that certain reactions can be controlled by substitution of sulphur at specific molecular sites.

Perylene Diimide acceptors: Fabrication and characterization of electron-only, hole-only devices and solar cells

The thrust towards energy conservation and reduced environmental footprint has fueled intensive research for alternative low cost sources of renewable energy. Organic photovoltaic cells (OPVs), with their low fabrication costs, easy processing and flexibility, represent a possible viable alternative. Perylene diimides (PDIs) are promising electron-acceptor candidates for bulk heterojunction (BHJ) OPVs, as they combine higher absorption and stability with tunable material properties, such as solubility and position of the lowest unoccupied molecular orbital (LUMO) level. A prerequisite for trap free electron transport is for the LUMO to be located at a level deeper than 3.7 eV since electron trapping in organic semiconductors is universal and dominated by a trap level located at 3.6 eV. Although the mostly used fullerene acceptors in polymer:fullerene solar cells feature trap-free electron transport, low optical absorption of fullerene derivatives limits maximum attainable efficiency. In this thesis, we try to get a better understanding of the electronic properties of PDIs, with a focus on charge carrier transport characteristics and the effect of different processing conditions such as annealing temperature and top contact (cathode) material. We report on a commercially available PDI and three PDI derivatives as acceptor materials, and its blends with MEH-PPV (Poly[2-methoxy 5-(2-ethylhexyloxy)-1,4-phenylenevinylene]) and P3HT (Poly(3-hexylthiophene-2,5-diyl)) donor materials in single carrier devices (electron-only and hole-only) and in solar cells. Space-charge limited current measurements and modelling of temperature dependent J-V characteristics confirmed that the electron transport is essentially trap-free in such materials. Different blend ratios of P3HT:PDI-1 (1:1) and (1:3) show increase in the device performance with increasing PDI-1 ratio. Furthermore, thermal annealing of the devices have a significant effect in the solar cells that decreases open-circuit voltage (Voc) and fill factor FF, but increases short-circuit current (Jsc) and overall device performance. Morphological studies show that over-aggregation in traditional donor:PDI blend systems is still a big problem, which hinders charge carrier transport and performance in solar cells.