28 resultados para Bearing faults
Resumo:
RESUMO O Problema. A natureza, diversidade e perigosidade dos resíduos hospitalares (RH) exige procedimentos específicos na sua gestão. A sua produção depende do número de unidades de prestação de cuidados de saúde (upcs), tipo de cuidados prestados, número de doentes observados, práticas dos profissionais e dos órgãos de gestão das upcs, inovação tecnológica, entre outros. A gestão integrada de RH tem evoluído qualitativamente nos últimos anos. Existe uma carência de informação sobre os quantitativos de RH produzidos nas upcs e na prestação de cuidados domiciliários, em Portugal. Por outro lado, os Serviços de Saúde Pública, abrangendo o poder de Autoridade de Saúde, intervêm na gestão do risco para a saúde e o ambiente associado à produção de RH, necessitando de indicadores para a sua monitorização. O quadro legal de um país nesta matéria estabelece a estratégia de gestão destes resíduos, a qual é condicionada pela classificação e definição de RH por si adoptadas. Objectivos e Metodologias. O presente estudo pretende: quantificar a produção de RH resultantes da prestação de cuidados de saúde, em seres humanos e animais nas upcs, do sistema público e privado, desenvolvendo um estudo longitudinal, onde se quantifica esta produção nos Hospitais, Centros de Saúde, Clínicas Médicas e Dentárias, Lares para Idosos, Postos Médicos de Empresas, Centros de Hemodiálise e Clínicas Veterinárias do Concelho da Amadora, e se compara esta produção em dois anos consecutivos; analisar as consequências do exercício do poder de Autoridade de Saúde na gestão integrada de RH pelas upcs; quantificar a produção média de RH, por acto prestado, nos cuidados domiciliários e, com um estudo analítico transversal, relacionar essa produção média com as características dos doentes e dos tratamentos efectuados; proceder à análise comparativa das definições e classificações de RH em países da União Europeia, através de um estudo de revisão da legislação nesta matéria em quatro países, incluindo Portugal. Resultados e Conclusões. Obtém-se a produção média de RH, por Grupos I+II, III e IV: nos Hospitais, por cama.dia, considerando a taxa de ocupação; por consulta, nos Centros de Saúde, Clínicas Médicas e Dentárias e Postos Médicos de Empresas; por cama.ano, nos Lares para Idosos, considerando a sua taxa de ocupação; e por ano, nas Clínicas de Hemodiálise e Veterinárias. Verifica-se que a actuação da Autoridade de Saúde, produz nas upcs uma diferença estatisticamente significativa no aumento das contratualizações destas com os operadores de tratamento de RH. Quantifica-se o peso médio de resíduos dos Grupos III e IV produzido por acto prestado nos tratamentos domiciliários e relaciona-se esta variável dependente com as características dos doentes e dos tratamentos efectuados. Comparam-se os distintos critérios utilizados na elaboração das definições e classificações destes resíduos inscritas na legislação da Alemanha, Reino Unido, Espanha e Portugal. Recomendações. Apresentam-se linhas de investigação futura e propõe-se uma reflexão sobre eventuais alterações de aspectos específicos no quadro legal português e nos planos de gestão integrada de RH, em Portugal. ABSTRACT The problem: The nature, diversity and hazardousness of hospital wastes (HW) requires specific procedures in its management. Its production depends on the number and patterns of healthcare services, number of patients, professional and administration practices and technologic innovations, among others. Integrated management of HW has been developping, in the scope of quality, for the past few years. There is a lack of information about the amount of HW produced in healthcare units and in the domiciliary visits, in Portugal. On the other hand, the Public Health Services, embracing the Health Authority’s power, play a very important role in managing the risk of HW production to public and environmental health. They need to use some indicators in its monitorization. In a country, rules and regulations define hospital waste management policies, which are confined by the addopted classification and definition of HW. Goals and Methods: This research study aims to quantify the production of HW as a result of healthcare services in human beings and animals, public service and private one. Through a longitudinal study, this production is quantified in Hospitals, Health Centers, Medical and Dental Clinics, Residential Centers for old people, Companies Medical Centers and Veterinary and Haemodyalisis Clinics in Amadora’s Council, comparing this production in two consecutive years. This study also focus the consequences of the Health Authority’s role in the healthcare services integrated management of HW. The middle production of HW in the domiciliary treatments is also quantified and, with a transversal analytic study, its association with patients and treatments’ characteristics is enhanced. Finally, the definitions and classifications in the European Union Countries are compared through a study that revises this matter’s legislation in four countries, including Portugal. Results and Conclusions: We get the middle production of Groups I+II, III and IV: HW: in Hospitals, by bed.day, bearing the occupation rate; by consultation, in Health Centers, Medical and Dental Clinics and Companies Medical Centers; by bed.year in Residential Centers for old people, considering their occupation rate; by year, in Veterinary and Haemodyalisis Clinics. We verify that the Health Authority’s role produces a significative statistical difference in the rise of the contracts between healthcare services and HW operators. We quantify the Groups III and IV’s wastes middle weight, produced by each medical treatment in domiciliary visits and relate this dependent variable with patients and treatments’ characteristics. We compare the different criteria used in the making of definitions and classifications of these wastes registered in German, United Kingdom, Spain and Portugal’s laws. Recommendations: Lines of further investigation are explaned. We also tender a reflexion about potential changes in rules, in regulations and in the integrated plans for managing hospital wastes in Portugal. RÉSUMÉ Le Problème. La gestion des déchets d'activités hospitalières (DAH) et de soins de santé (DSS) exige des procédures spécifiques en raison de leur nature, diversité et dangerosité. Leur production dépend, parmi d’autres, du nombre d’unités de soins de santé (USS), du type de soins administrés, du nombre de malades observés, des pratiques des professionnels et des organes de gestion des USS, de l’innovation technologique. La gestion intégrée des DAH et des DSS subit une évolution qualitative dans les dernières années. Il existe un déficit d’information sur les quantitatifs de DAH et de DSS provenant des USS et de la prestation de soins domiciliaires, au Portugal. D’autre part les Services de Santé Publique, y compris le pouvoir de l’Autorité de Santé, qui interviennent dans la gestion du risque pour la santé et pour l’environnement associé à la production de DAH et de DSS, ont besoin d’indicateurs pour leur surveillance. Dans cette matière le cadre légal établit la stratégie de gestion de ces déchets, laquelle est conditionnée par la classification et par la définition des DAH et des DSS adoptées par le pays. Objectifs et Méthodologie. Cet étude prétend: quantifier la production de DAH et de DSS provenant de la prestation de soins de santé, en êtres humains et animaux dans les USS du système public et privé. À travers un étude longitudinal, on quantifie cette production dans les Hôpitaux, Centres de Santé, Cliniques Médicales et Dentaires, Maisons de Repos pour personnes âgées, Cabinets Médicaux d’ Entreprises, Centres d’Hémodialyse et Cliniques Vétérinaires du municipe d’ Amadora, en comparant cette production en deux ans consécutifs; analyser les conséquences de l’exercice du pouvoir de l’Autorité de Santé dans la gestion intégrée des DAH et des DSS par les USS; quantifier la production moyenne de DAH et de DSS dans la prestation de soins domiciliaires et, avec un étude analytique transversal, rapporter cette production moyenne avec les caractéristiques des malades et des soins administrés; procéder à l’ analyse comparative des définitions et classifications des DAH et des DSS dans des pays de l’Union Européenne, à travers un étude de révision de la législation relative à cette matière dans quatre pays, Portugal y compris. Résultats et Conclusions. On obtient la production moyenne de DAH et des DSS, par Classes I+II, III et IV: dans les hôpitaux, par lit.jour, en considérant le taux d’occupation; par consultation, dans les Centres de Santé, Cliniques Médicales et Dentaires et Cabinets Médicaux d’ Entreprises par lit.an dans les Maisons de Repos pour personnes âgées en considérant le taux d’occupation; et par an, dans les Cliniques d’Hémodialyse et Vétérinaires. On constate que l’actuation de l’Autorité de Santé produit dans les USS une différence statistiquement significative dans l’accroissement de leurs contractualisations avec les opérateurs de traitement de DAH et de DSS. On quantifie le poids moyen des déchets des Classes III et IV produit par acte de prestation de soins à domicile et on rapporte cette variable dépendante avec les caractéristiques des malades et des soins administrés. On compare les différents critères utilisés dans l’élaboration des définitions et des classifications de ces déchets inscrites dans la légis
Resumo:
All every day activities take place in space. And it is upon this that all information and knowledge revolve. The latter are the key elements in the organisation of territories. Their creation, use and distribution should therefore occur in a balanced way throughout the whole territory in order to allow all individuals to participate in an egalitarian society, in which the flow of knowledge can take precedence over the flow of interests. The information society depends, to a large extent, on the technological capacity to disseminate information and, consequently, the knowledge throughout territory, thereby creating conditions which allow a more balanced development, from the both the social and economic points of view thus avoiding the existence of info-exclusion territories. Internet should therefore be considered more than a mere technology, given that its importance goes well beyond the frontiers of culture and society. It is already a part of daily life and of the new forms of thinking and transmitting information, thus making it a basic necessity essential, for a full socio-economic development. Its role as a platform of creation and distribution of content is regarded as an indispensable element for education in today’s society, since it makes information a much more easily acquired benefit.”…in the same way that the new technologies of generation and distribution of energy allowed factories and large companies to establish themselves as the organisational bases of industrial society, so the internet today constitutes the technological base of the organisational form that characterises the Information Era: the network” (CASTELLS, 2004:15). The changes taking place today in regional and urban structures are increasingly more evident due to a combination of factors such as faster means of transport, more efficient telecommunications and other cheaper and more advanced technologies of information and knowledge. Although their impact on society is obvious, society itself also has a strong influence on the evolution of these technologies. And although physical distance has lost much of the responsibility it had towards explaining particular phenomena of the economy and of society, other aspects such as telecommunications, new forms of mobility, the networks of innovation, the internet, cyberspace, etc., have become more important, and are the subject of study and profound analysis. The science of geographical information, allows, in a much more rigorous way, the analysis of problems thus integrating in a much more balanced way, the concepts of place, of space and of time. Among the traditional disciplines that have already found their place in this process of research and analysis, we can give special attention to a geography of new spaces, which, while not being a geography of ‘innovation’, nor of the ‘Internet’, nor even ‘virtual’, which can be defined as one of the ‘Information Society’, encompassing not only the technological aspects but also including a socio-economic approach. According to the last European statistical data, Portugal shows a deficit in terms of information and knowledge dissemination among its European partners. Some of the causes are very well identified - low levels of scholarship, weak investments on innovation and R&D (both private and public sector) - but others seem to be hidden behind socio-economical and technological factors. So, the justification of Portugal as the case study appeared naturally, on a difficult quest to find the major causes to territorial asymmetries. The substantial amount of data needed for this work was very difficult to obtain and for the islands of Madeira and Azores was insufficient, so only Continental Portugal was considered for this study. In an effort to understand the various aspects of the Geography of the Information Society and bearing in mind the increasing generalised use of information technologies together with the range of technologies available for the dissemination of information, it is important to: (i) Reflect on the geography of the new socio-technological spaces. (ii) Evaluate the potential for the dissemination of information and knowledge through the selection of variables that allow us to determine the dynamic of a given territory or region; (iii) Define a Geography of the Information Society in Continental Portugal.
Resumo:
An Upper Miocene important sedimentary break can be accurately recognised in the Portuguese basins and is reflected by a drastic palaeogeographic change in relation to a large-scale tectonic event of probable uppermost Vallesian-Turolian (9,5 Ma; middle Tortonian) age. The characterisation of the sedimentary record of this tectonic event, as well as its relations with interpreted active faults is made for different situations: Douro (NW border), Mondego, Lower-Tagus and Sado Tertiary basins. The sedimentary record, considered upper Tortonian-Messinian ? (uppermost Vallesian-Turolian ?) is interpreted mainly as endorheic alluvial fans (internal drainage), developed along active NNE-SSW indent-linked strike-slip faults and NE-SW reverse faults. At NE Portugal, proximal fluvial systems of an endorheic hydrographic network drained eastwards to the Spanish Duero interior Basin. The main evidences of the betic compression clímax in Portugal mainland are presented; the interpreted active tectonic structures are in accordance with an intense NNW-SSE crustal shortening, but some regional differences are also documented.
Resumo:
One of the most common characteristics of Portuguese littoral is the existence of a planed surface (the so-called "littoral platform"), situated at different altitudes and bordered from the inland by a straight relief, strongly contrasting with that planed surface. This one is generally covered with several outcrops of the so-called Plio-Pleistocene deposits. Till the eighties this platform has been interpreted as stable staircase of old marine levels, registering in a passive way the eustatic variations. The rigid step bordering it easterly should be a fossil cliff. However, our study has proved that many of these deposits have a continental origin. These continental deposits have fluvial or alluvial fan facies and they are lying above 40 meters. Marine deposits seem to be quite rare and they only occupy a small western area, beneath the altitude of 40 meters and developing into three different marine levels. There is a rigid step between the two kinds of deposits. We think that the clear geometric separation between these deposits together with this rigid step, indicates a tectonic origin. It seems that the sea must have touched only the western part of this surface, when neotectonic movements lowered it down. There are more evidences for neotectonic movements: a) there are faults (mainly inverse faults) affecting the higher deposits of this littoral platform; b) the same marine level seems to appear at different altitudes, developing an irregular pattern with a general trend dipping from the North to the South.
Resumo:
The Aljezur "graben" is a crucial piece in understanding the Caenozoic evolution of the SW atlantic portuguese edge. Detailed study of the sedimentary filling and bordering accidents allows the identification of several evolution steps since the Miocene. The graben is bordered by accidents that dislocate geomorphologic surfaces (Littoral Platform to the W, Interior Platform to the E), and also Neogene sedimentary units. The sedimentary filling is composed by conglomerates and sands grading into clays and bioclastic limestones (Burdigalian to Serravalian), upon which lie unconformably fine reddish sands, sometimes with abundant micas. Genetic and geometric relationships between these sands, those in higher surfaces outside the "graben" and the main bordering faults, are discussed. As a conclusion, the reconstruction of the tectono-sedimentary evolution is attempted, integrating it in a "pull-apart" context associated with the Messejana-fault system and it's reactivation by the differently orientated alpine compressions.
Resumo:
From an early age Henri Tintant was conforted with the problematic relationships between Science and Faith. After a traditional religious education, he took responsabilities within groups of teenagers and adults through scouting and the J. E. C. (an organisation of catholic students). In 1940 he was at Montpellier distributing unauthorised leaflets defending religious faith. But more significant is his intellectual contribution. He was an active and inspiring member of several workshops and in one in particumar initiated by the Catholic University of Lyon entitled : "From Naturalist to Theologians" where he would start a very fruitful and compelling intellectual collaboration with Father Gustave Martelet a jesuit theologian and a strong supporter of a permanent dialog with the scientists. Throughout the years they will gradually come to the conclusion of a necessary synergy between the scientific and the theologic approach when dealing with the mystery of religious faith . Even in the last months of his life, Henri Tintant was writing to his friendon the subject, with the same profound religious faith that brought him the serenity and the open mindness he has showed throughout his teaching and scientific career. His legacy will remain in two of his last thoughts: "Almost 50 years of scientific research have brought me a lot of pleausures and satisfactions but no answer to the essential questions. In my personal case, science and researching have not driven me away from my religious faith, on the contrary the helped me in my awareness of its utmost necessity". "Faithful to my religious belief, I am convinced that with the death, the inevitable human destiny, not everything disapears completely but another form of live, unimaginable for our limited minds, emerges, bearing in itself the perfect realization of all our hopes and desires".
Resumo:
Dissertação apresentada para obtenção do grau de doutor em Biologia pelo Instituto de Tecnologia Química e Biológica da Universidade Nova de Lisboa
Resumo:
Dissertação apresentada na Faculdade de Ciências e Tecnologia da Universidade Nova de Lisboa de Lisboa para obtenção do grau de mestre em Engenharia Electrotécnica e de Computadores
Resumo:
Photo-interpretation of aerial stereopairs of the Sintra region on the approx. 1/32 000 scale together with field work allowed the production of the present Tectonic Map of the Sintra region. It is now possible to separate structures which resulted from two different tectonic events: one, corresponding to the intrusion of the Late Cretaceous Sintra igneous diapir, and the other the Miocene compressive event, the most important tectonic inversion phase of the Lusitanian Basin. The former are present to the south, southeast and east of the intrusion and within the intrusion itself, affecting the peripheral granites and their contacts with the gabbro-syenite core. These structures comprehend: i) faults and conical fractures striking parallel to the massif boundary, which were intruded by dykes, ii) vertical faults and fractures of two conjugate sets, dextral NNW-SSE and sinistral NNE-SSW. These faults are certainly associated with the E-W striking massif's northwards directed thrust and indicate a N-S oriented horizontal maximum compressive stress. The Miocene compressive event reactivated most of the inherited structures as follows. The NNWSSE faults located on the Sintra southern platform were reactivated as dextral strike slip faults and the E-W thrust along the northern boundary of the massif was also reactivated. This thrust propagated to the east. It also enhanced the asymmetry of the rim-syncline, uplifted the massif and reactivated the NNE-SSW faults as sinistral lateral ramps, which also accommodated vertical throw. The present Tectonic Map of Sintra together with the available geophysical data (MOREIRA, 1984, KULLBERG et al., 1991, SILVA & MIRANDA, 1994) allowed reassessment of the models proposed for the emplacement of the Sintra, Sines and Monchique igneous massifs, which intruded during Late Cretaceous times along the deep dextral NNW-SSE oriented strike slip fault (RIBEIRO et al., 1979; TERRINHA, 1998; TERRINHA & KULLBERG, 1998).
Resumo:
Geociências, Museu Nac. Hist. Nat. Univ. Lisboa, nº 2, 35-84
Resumo:
Trabalho de Projecto apresentado para cumprimento dos requisitos necessários à obtenção do grau de Mestre em Ensino do Inglês
Resumo:
Some of the properties sought in seismic design of buildings are also considered fundamental to guarantee structural robustness. Moreover, some key concepts are common to both seismic and robustness design. In fact, both analyses consider events with a very small probability of occurrence, and consequently, a significant level of damage is admissible. As very rare events,in both cases, the actions are extremely hard to quantify. The acceptance of limited damage requires a system based analysis of structures, rather than an element by element methodology, as employed for other load cases. As for robustness analysis, in seismic design the main objective is to guarantee that the structure survives an earthquake, without extensive damage. In the case of seismic design, this is achieved by guaranteeing the dissipation of energy through plastic hinges distributed in the structure. For this to be possible, some key properties must be assured, in particular ductility and redundancy. The same properties could be fundamental in robustness design, as a structure can only sustain significant damage if capable of distributing stresses to parts of the structure unaffected by the triggering event. Timber is often used for primary load‐bearing elements in single storey long‐span structures for public buildings and arenas, where severe consequences can be expected if one or more of the primary load bearing elements fail. The structural system used for these structures consists of main frames, secondary elements and bracing elements. The main frame, composed by columns and beams, can be seen as key elements in the system and should be designed with high safety against failure and under strict quality control. The main frames may sometimes be designed with moment resisting joints between columns and beams. Scenarios, where one or more of these key elements, fail should be considered at least for high consequence buildings. Two alternative strategies may be applied: isolation of collapsing sections and, provision of alternate load paths [1]. The first one is relatively straightforward to provide by deliberately designing the secondary structural system less strong and stiff. Alternatively, the secondary structural system and the bracing system can be design so that loss of capacity in the main frame does not lead to the collapse. A case study has been selected aiming to assess the consequences of these two different strategies, in particular, under seismic loads.
Resumo:
RESUMO: A entorse do tornozelo é uma das lesões músculo-esqueléticas mais comuns. A limitação da amplitude de dorsiflexão tem sido demonstrada como uma das consequências desta lesão, bem como um dos factores contribuintes para a recorrência. Vários estudos têm demonstrado que o membro lesado de indivíduos com história de entorse, apresenta uma falha posicional anterior do peróneo. Um estudo realizado em cadáveres revelou que um deslizamento póstero-superior ao nível da articulação tibioperoneal inferior pode contribuir para aumentar a amplitude de dorsiflexão. Está descrita uma técnica de terapia manual que realiza o deslizamento póstero-superior do maléolo lateral associada ao movimento activo de flexão dorsal (MWM). No entanto, não existe, até à data, nenhum estudo que investigue a efectividade desta MWM em indivíduos com limitação da FD e história de entorse unilateral do tornozelo. Desenho de estudo: Ensaio clínico aleatorizado e controlado por placebo, duplamente cego. Objectivos: Avaliar os efeitos imediatos da MWM na articulação tibio-peroneal inferior na amplitude de flexão dorsal e no deslizamento posterior do astrágalo em indivíduos com história de entorse unilateral do tornozelo e limitação da flexão dorsal. O protocolo experimental foi aplicado uma única vez e os seus efeitos comparados com uma intervenção placebo. Metodologia: Uma amostra de 30 indivíduos com história de entorse unilateral e limitação da amplitude de flexão dorsal foi aleatoriamente distribuído por dois grupos: grupo MWM e grupo placebo. Foram avaliados o deslizamento posterior do astrágalo e a avaliação da amplitude de flexão dorsal em carga. As avaliações foram realizadas imediatamente antes e após a intervenção. Resultados: Não foram encontradas diferenças significativas entre os grupos na avaliação inicial (baseline). A realização da one-way ANCOVA revelou que, imediatamente após a intervenção, se verificou um aumento na amplitude de flexão dorsal no grupo MWM (aumento de 1.37 cm (DP, 0.97) significativamente superior ao grupo placebo (diminuição de 0.15cm (DP, 0.63) (P<.001). O deslizamento posterior do astrágalo aumentou 1.51º (DP, 1.77) no grupo MWM, no entanto este aumento não foi significativamente superior ao aumento de 0.76º (DP, 1.26) do grupo placebo (P=.113). Conclusão: Os resultados sugerem que a MWM na articulação tibioperoneal inferior produziram um efeito significativo na amplitude de flexão dorsal embora o mesmo não se tenha verificado no deslizamento posterior do astrágalo. Estes resultados fornecem evidência preliminar para a efectividade da MWM como intervenção em indivíduos com história de entorse unilateral e limitação da amplitude de flexão dorsal.---------------ABSTRACT:Background: Ankle sprains are one of the most common musculo-skeletal injuries. Impaired dorsiflexion range of motion has been shown to be one of the consequences of this injury, as well as one of the contributing factors to recurrence. Several studies have shown the presence of an anterior positional fault of the fibula in injuried ankles. A cadaveric study revealed that a posterosuperior glide of the distal tibiofibular may contribute to improve dorsiflexion. There is a manual therapy technique which provides a posterosuperior glide of the lateral malleolus combined with dorsiflexion active movement (MWM). However, there was no study, until now, that investigated the effectiveness of this MWM in individuals with impaired dorsiflexion and history of unilateral ankle sprain. Design: Double-blind randomized placebo controlled trial. Objectives: To determine the immediate effects of a distal tibiofibular MWM in ankle dorsiflexion and talar posterior glide in patients with history of unilateral ankle sprain and limitation of dorsiflexion. The treatment technique was used as a single treatment against a placebo group. Methods: A sample of 30 subjects with a history of unilateral ankle sprain and limitation of dorsiflexion were randomized into two groups: distal tibiofibular MWM or a placebo group. The outcome measures used in this study were the posterior talar glide and weight-bearing (WB) ankle dorsiflexion range of motion. The measures were taken before and immediately after the intervention. Results: No significant differences were found in baseline measures between groups. A one-way ANCOVA revealed that, immediately after the intervention, there was an improvement in ankle dorsiflexion in the MWM group (increase of 1.37 cm (SD, 0.97) significantly superior to the placebo group (decrease of 0.15cm (SD, 0.63) (P<.001). Posterior talar glide increased by 1.51º (SD, 1.77) for the MWM group, which was more than 0.76º (SD, 1.25) for the placebo intervention although there wasn’t a significant difference between groups (P=.113). Conclusion: This investigation’s findings suggest that an inferior tibio-fibular MWM produced a significant effect on WB dorsiflexion range of motion and posterior talar glide. These results provide preliminary evidence for the efficacy of mobilisations with movement in the management of individuals with history of unilateral ankle sprain and limitation of dorsiflexion.