Application of NMR RDC’s, relaxation and self-diffusion for the study of dynamic processes of small molecules in solution

Spin-lattice Relaxation, self-Diffusion coefficients and Residual Dipolar Couplings (RDC’s) are the basis of well established Nuclear Magnetic Resonance techniques for the physicochemical study of small molecules (typically organic compounds and natural products with MW < 1000 Da), as they proved to be a powerful and complementary source of information about structural dynamic processes in solution. The work developed in this thesis consists in the application of the earlier-mentioned NMR techniques to explore, analyze and systematize patterns of the molecular dynamic behavior of selected small molecules in particular experimental conditions. Two systems were chosen to investigate molecular dynamic behavior by these techniques: the dynamics of ion-pair formation and ion interaction in ionic liquids (IL) and the dynamics of molecular reorientation when molecules are placed in oriented phases (alignment media). The application of NMR spin-lattice relaxation and self-diffusion measurements was applied to study the rotational and translational molecular dynamics of the IL: 1-butyl-3-methylimidazolium tetrafluoroborate [BMIM][BF4]. The study of the cation-anion dynamics in neat and IL-water mixtures was systematically investigated by a combination of multinuclear NMR relaxation techniques with diffusion data (using by H1, C13 and F19 NMR spectroscopy). Spin-lattice relaxation time (T1), self-diffusion coefficients and nuclear Overhauser effect experiments were combined to determine the conditions that favor the formation of long lived [BMIM][BF4] ion-pairs in water. For this purpose and using the self-diffusion coefficients of cation and anion as a probe, different IL-water compositions were screened (from neat IL to infinite dilution) to find the conditions where both cation and anion present equal diffusion coefficients (8% water fraction at 25 ºC). This condition as well as the neat IL and the infinite dilution were then further studied by 13C NMR relaxation in order to determine correlation times (c) for the molecular reorientational motion using a mathematical iterative procedure and experimental data obtained in a temperature range between 273 and 353 K. The behavior of self-diffusion and relaxation data obtained in our experiments point at the combining parameters of molar fraction 8 % and temperature 298 K as the most favorable condition for the formation of long lived ion-pairs. When molecules are subjected to soft anisotropic motion by being placed in some special media, Residual Dipolar Couplings (RDCs), can be measured, because of the partial alignment induced by this media. RDCs are emerging as a powerful routine tool employed in conformational analysis, as it complements and even outperforms the approaches based on the classical NMR NOE or J3 couplings. In this work, three different alignment media have been characterized and evaluated in terms of integrity using 2H and 1H 1D-NMR spectroscopy, namely the stretched and compressed gel PMMA, and the lyotropic liquid crystals CpCl/n-hexanol/brine and cromolyn/water. The influence that different media and degrees of alignment have on the dynamic properties of several molecules was explored. Different sized sugars were used and their self-diffusion was determined as well as conformation features using RDCs. The results obtained indicate that no influence is felt by the small molecules diffusion and conformational features studied within the alignment degree range studied, which was the 3, 5 and 6 % CpCl/n-hexanol/brine for diffusion, and 5 and 7.5 % CpCl/n-hexanol/brine for conformation. It was also possible to determine that the small molecules diffusion verified in the alignment media presented close values to the ones observed in water, reinforcing the idea of no conditioning of molecular properties in such media.

Technical optimization of the synthesis of flavours

The goal of this thesis is the investigation and optimization of the synthesis of potential fragrances. This work is projected as collaboration between the University of Applied Sciences in Merseburg and the company Miltitz Aromatics GmbH in Bitterfeld‐Wolfen (Germany). Flavoured compounds can be synthesized in different ways and by various methods. In this work, methods like the phase transfer catalysis and the Cope‐rearrangement were investigated and applied, for getting a high yield and quantity of the desired substances and without any by‐products or side reactions. This involved the study of syntheses with different process parameters such as temperature, solvent, pressure and reaction time. The main focus was on Cope‐rearrangement, which is a common method in the synthesis of new potential fragrance compounds. The substances synthesized in this work have a hepta‐1,5‐diene‐structure and that is why they can easily undergo this [3,3]‐sigma tropic rearrangement. The lead compound of all research was 2,5‐dimethyl‐2‐vinyl‐4‐hexenenitrile (Neronil). Neronil is synthesized by an alkylation of 2‐methyl‐3‐butenenitrile with prenylchloride under basic conditions in a phase‐transfer system. In this work the yield of isolated Neronil is improved from about 35% to 46% by according to the execution conditions of the reaction. Additionally the amount of side product was decreased. This synthesized hexenenitrile involved not only the aforementioned 1,5‐diene‐structure, but also a cyano group, that makes this structure a suitable base for the synthesis of new potential fragrance compounds. It was observed that Neronil can be transferred into 2,5‐dimethyl‐2‐vinyl‐4‐hexenoic acid by a hydrolysis under basic conditions. After five hours the acid can be obtained with a yield of 96%. The following esterification is realized with isobutanol to produce 2,5‐dimethyl‐2‐vinyl‐4‐hexenoic acid isobutyl ester with quantitative conversion. It was observed that the Neronil and the corresponding ester can be converted into the corresponding Cope‐product, with a conversion of 30 % and 80%. Implementing the Cope‐rearrangement, the acid was heated and an unexpected decarboxylated product is formed. To achieve the best verification of reaction development and structure, scrupulous analyses were done using GC‐MS, 1H‐NMR and 13C‐ NMR.

Susceptibility and prognostic factors in portuguese patients with juvenile idiopathic arthritis

ABSTRACT: Objectives: This study aimed to confirm whether 15 single nucleotide polymorphisms (SNPs) of selected genes are also associated with susceptibility for Juvenile idiopathic Arthritis (JIA) in thePortuguese population. Methods: Our study was conducted on Reuma.pt, the Rheumatic Diseases Portuguese Register, which includes patients with JIA receiving biological therapies and synthetic Disease Modifying Anti Rheumatic Drugs (DMARDs) since June 2001. Fifteen SNPs were investigated using Taqman® SNP genotyping assays in 291 Portuguese patients with JIA and 300 ethnically matched healthy controls. Results: Prior to Bonferroni correction for multiple testing, significant genotype association between one SNP and overall group of JIA was observed (PTPN22 rs2476601). In subgroup analysis, associations between six SNPs and the subgroup of patients with rheumatoid factor (RF)-positive Polyarticular (PTPN2 rs7234029), Extended oligoarticular (PTPN22 rs2476601), Systemic (PTPRC rs10919563, ANGPT1 rs7151781 and TNF rs361525) and Psoriatic JIA (IL2RA/CD25 rs2104286) were found. After Bonferroni correction for multiple testing, 3 genotype associations remained significant in the subgroup of patients with RF-positive polyarticular JIA (PTPN2 rs7234029 [corrected P 0.026]), extended oligoarticular (PTPN22 rs2476601 [corrected P 0.026]) and systemic JIA (ANGPT1 rs7151781 [corrected P 0.039]). Conclusion: Our results provide additional evidence for an association between polymorphisms in genes PTPN2, PTPN22 and ANGPT1 and the risk of RF-positive polyarticular, extended oligoarticular and systemic JIA, respectively, in a Portuguese population.

Versão portuguesa do CANE (Camberwell Assessment of Need for the Elderly) : desenvolvimento e dados preliminares

RESUMO - A avaliação de necessidades de cuidados é crucial no planeamento, monitorização e avaliação de serviços de psiquiatria e saúde mental, bem como na investigação e na clínica. Este princípio é obviamente aplicável aos serviços responsáveis por populações de pessoas mais velhas. O instrumento CANE — Camberwell Assessment of Need for the Elderly possibilita uma avaliação consistente das necessidades de utentes idosos, nomeadamente em situações de patologia neuropsiquiátrica. Procede-se a uma avaliação cruzada, entrevistando a pessoa em questão, o seu cuidador informal e o técnico responsável. Esta avaliação multidimensional abrange domínios da esfera biológica, psicológica e social, sendo aplicável na comunidade ou em internamento (regime parcial ou completo). A utilidade do CANE tem sido evidenciada em contextos clínicos, de investigação e de avaliação de serviços. Existem múltiplas traduções a nível internacional, a maioria das quais validada. Na área da epidemiologia psiquiátrica nem sempre estão disponíveis os dados relativos à qualidade das adaptações de instrumentos, pelo que se apresenta o processo de desenvolvimento da versão portuguesa (de acordo com as regras para validação transcultural, no processo de tradução-retroversão). A aplicabilidade da versão portuguesa foi satisfatória neste estudo-piloto, representando a primeira fase de um trabalho multicêntrico nacional. Nesta fase inicial, foram considerados casos de idosos com patologia neuropsiquiátrica (maioritariamente demência — 71,4%), em dois centros (Lisboa e Porto) (n = 21). A média de idades foi 73,9 (± 6,3) anos, sendo 76,2% do sexo feminino. A maioria vivia em casa, apresentava co-morbilidade somática e estava em contacto com um cuidador informal (em geral, familiares do sexo feminino). Os avaliadores identificaram necessidades, nem sempre cobertas, nas seguintes dimensões: cuidados com a casa, alimentação, actividades diárias, memória, saúde física, sofrimento psicológico, companhia e dinheiro/economias. Nem sempre a perspectiva de doentes, cuidadores, técnicos e avaliadores foi inteiramente coincidente. Estes resultados preliminares da aplicação da versão portuguesa do CANE são consistentes quanto à sua validade ecológica, facial e de conteúdo, estando em curso contributos adicionais para a validação efectiva numa amostra de maior dimensão.

Development of human central nervous system 3D in vitro models for preclinical research

Neurological disorders are a major concern in modern societies, with increasing prevalence mainly related with the higher life expectancy. Most of the current available therapeutic options can only control and ameliorate the patients’ symptoms, often be-coming refractory over time. Therapeutic breakthroughs and advances have been hampered by the lack of accurate central nervous system (CNS) models. The develop-ment of these models allows the study of the disease onset/progression mechanisms and the preclinical evaluation of novel therapeutics. This has traditionally relied on genetically engineered animal models that often diverge considerably from the human phenotype (developmentally, anatomically and physiologically) and 2D in vitro cell models, which fail to recapitulate the characteristics of the target tissue (cell-cell and cell-matrix interactions, cell polarity). The in vitro recapitulation of CNS phenotypic and functional features requires the implementation of advanced culture strategies that enable to mimic the in vivo struc-tural and molecular complexity. Models based on differentiation of human neural stem cells (hNSC) in 3D cultures have great potential as complementary tools in preclinical research, bridging the gap between human clinical studies and animal models. This thesis aimed at the development of novel human 3D in vitro CNS models by integrat-ing agitation-based culture systems and a wide array of characterization tools. Neural differentiation of hNSC as 3D neurospheres was explored in Chapter 2. Here, it was demonstrated that human midbrain-derived neural progenitor cells from fetal origin (hmNPC) can generate complex tissue-like structures containing functional dopaminergic neurons, as well as astrocytes and oligodendrocytes. Chapter 3 focused on the development of cellular characterization assays for cell aggregates based on light-sheet fluorescence imaging systems, which resulted in increased spatial resolu-tion both for fixed samples or live imaging. The applicability of the developed human 3D cell model for preclinical research was explored in Chapter 4, evaluating the poten-tial of a viral vector candidate for gene therapy. The efficacy and safety of helper-dependent CAV-2 (hd-CAV-2) for gene delivery in human neurons was evaluated, demonstrating increased neuronal tropism, efficient transgene expression and minimal toxicity. The potential of human 3D in vitro CNS models to mimic brain functions was further addressed in Chapter 5. Exploring the use of 13C-labeled substrates and Nucle-ar Magnetic Resonance (NMR) spectroscopy tools, neural metabolic signatures were evaluated showing lineage-specific metabolic specialization and establishment of neu-ron-astrocytic shuttles upon differentiation. Chapter 6 focused on transferring the knowledge and strategies described in the previous chapters for the implementation of a scalable and robust process for the 3D differentiation of hNSC derived from human induced pluripotent stem cells (hiPSC). Here, software-controlled perfusion stirred-tank bioreactors were used as technological system to sustain cell aggregation and dif-ferentiation. The work developed in this thesis provides practical and versatile new in vitro ap-proaches to model the human brain. Furthermore, the culture strategies described herein can be further extended to other sources of neural phenotypes, including pa-tient-derived hiPSC. The combination of this 3D culture strategy with the implemented characterization methods represents a powerful complementary tool applicable in the drug discovery, toxicology and disease modeling.

Exchange rate pressure in Angola

The objective of this work is to develop an operational tool to analyze exchange rate pressure in the context of Angola. The Angolan economy exhibits a number of relevant characteristics: a closed financial account, a partially controlled current account, a highly dollarized economy and exports (oil) price determined in World markets. These features have a direct effect on the demand of foreign currency and motivate their inclusion in the specification of a model for Angola. The model provides the rational for a measure of an exchange market rate pressure (EMP) index that contains exports changes, imports changes, the foreign interest rate and inflation and the change in foreign reserves corrected for a measure dollarization. The empirical performance new measure is comparable (slightly better) to the performance of the EMP indexes obtained in Eichengreen Rose and Wyplosz (1994) and Klassen and Jager (2011).