NoC contention analysis using a branch-and-prune algorithm

“Many-core” systems based on a Network-on-Chip (NoC) architecture offer various opportunities in terms of performance and computing capabilities, but at the same time they pose many challenges for the deployment of real-time systems, which must fulfill specific timing requirements at runtime. It is therefore essential to identify, at design time, the parameters that have an impact on the execution time of the tasks deployed on these systems and the upper bounds on the other key parameters. The focus of this work is to determine an upper bound on the traversal time of a packet when it is transmitted over the NoC infrastructure. Towards this aim, we first identify and explore some limitations in the existing recursive-calculus-based approaches to compute the Worst-Case Traversal Time (WCTT) of a packet. Then, we extend the existing model by integrating the characteristics of the tasks that generate the packets. For this extended model, we propose an algorithm called “Branch and Prune” (BP). Our proposed method provides tighter and safe estimates than the existing recursive-calculus-based approaches. Finally, we introduce a more general approach, namely “Branch, Prune and Collapse” (BPC) which offers a configurable parameter that provides a flexible trade-off between the computational complexity and the tightness of the computed estimate. The recursive-calculus methods and BP present two special cases of BPC when a trade-off parameter is 1 or ∞, respectively. Through simulations, we analyze this trade-off, reason about the implications of certain choices, and also provide some case studies to observe the impact of task parameters on the WCTT estimates.

Lanczos algorithm on the grassmann manifold

5th. European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2008) 8th. World Congress on Computational Mechanics (WCCM8)

Genetic algorithm methodology applied to intelligent house control

In recent years the use of several new resources in power systems, such as distributed generation, demand response and more recently electric vehicles, has significantly increased. Power systems aim at lowering operational costs, requiring an adequate energy resources management. In this context, load consumption management plays an important role, being necessary to use optimization strategies to adjust the consumption to the supply profile. These optimization strategies can be integrated in demand response programs. The control of the energy consumption of an intelligent house has the objective of optimizing the load consumption. This paper presents a genetic algorithm approach to manage the consumption of a residential house making use of a SCADA system developed by the authors. Consumption management is done reducing or curtailing loads to keep the power consumption in, or below, a specified energy consumption limit. This limit is determined according to the consumer strategy and taking into account the renewable based micro generation, energy price, supplier solicitations, and consumers’ preferences. The proposed approach is compared with a mixed integer non-linear approach.

Ant colony search algorithm for the optimal power flow problem

To maintain a power system within operation limits, a level ahead planning it is necessary to apply competitive techniques to solve the optimal power flow (OPF). OPF is a non-linear and a large combinatorial problem. The Ant Colony Search (ACS) optimization algorithm is inspired by the organized natural movement of real ants and has been successfully applied to different large combinatorial optimization problems. This paper presents an implementation of Ant Colony optimization to solve the OPF in an economic dispatch context. The proposed methodology has been developed to be used for maintenance and repairing planning with 48 to 24 hours antecipation. The main advantage of this method is its low execution time that allows the use of OPF when a large set of scenarios has to be analyzed. The paper includes a case study using the IEEE 30 bus network. The results are compared with other well-known methodologies presented in the literature.

Optimal dispatch with reactive power compensation by Genetic Algorithm

This paper presents a Unit Commitment model with reactive power compensation that has been solved by Genetic Algorithm (GA) optimization techniques. The GA has been developed a computational tools programmed/coded in MATLAB. The main objective is to find the best generations scheduling whose active power losses are minimal and the reactive power to be compensated, subjected to the power system technical constraints. Those are: full AC power flow equations, active and reactive power generation constraints. All constraints that have been represented in the objective function are weighted with a penalty factors. The IEEE 14-bus system has been used as test case to demonstrate the effectiveness of the proposed algorithm. Results and conclusions are dully drawn.

Ancillary services market clearing simulation: a comparison between deterministic and heuristic methods

Electricity market players operating in a liberalized environment requires access to an adequate decision support tool, allowing them to consider all the business opportunities and take strategic decisions. Ancillary services represent a good negotiation opportunity that must be considered by market players. For this, decision support tool must include ancillary market simulation. This paper proposes two different methods (Linear Programming and Genetic Algorithm approaches) for ancillary services dispatch. The methodologies are implemented in MASCEM, a multi-agent based electricity market simulator. A test case based on California Independent System Operator (CAISO) data concerning the dispatch of Regulation Down, Regulation Up, Spinning Reserve and Non-Spinning Reserve services is included in this paper.

Ancillary services dispatch using linear programming and genetic algorithm approaches

Electricity market players operating in a liberalized environment requires access to an adequate decision support tool, allowing them to consider all the business opportunities and take strategic decisions. Ancillary services represent a good negotiation opportunity that must be considered by market players. For this, decision support tools must include ancillary market simulation. This paper proposes two different methods (Linear Programming and Genetic Algorithm approaches) for ancillary services dispatch. The methodologies are implemented in MASCEM, a multi-agent based electricity market simulator. A test case concerning the dispatch of Regulation Down, Regulation Up, Spinning Reserve and Non-Spinning Reserve services is included in this paper.

A study on the encryption algorithm for RFID tag (SEED : 8 Rounds × 64 bits block)

Although it is always weak between RFID Tag and Terminal in focus of the security, there are no security skills in RFID Tag. Recently there are a lot of studying in order to protect it, but because it has some physical limitation of RFID, that is it should be low electric power and high speed, it is impossible to protect with the skills. At present, the methods of RFID security are using a security server, a security policy and security. One of them the most famous skill is the security module, then they has an authentication skill and an encryption skill. In this paper, we designed and implemented after modification original SEED into 8 Round and 64 bits for Tag.

Derivative-free optimization and filter methods to solve nonlinear constrained problems

In real optimization problems, usually the analytical expression of the objective function is not known, nor its derivatives, or they are complex. In these cases it becomes essential to use optimization methods where the calculation of the derivatives, or the verification of their existence, is not necessary: the Direct Search Methods or Derivative-free Methods are one solution. When the problem has constraints, penalty functions are often used. Unfortunately the choice of the penalty parameters is, frequently, very difficult, because most strategies for choosing it are heuristics strategies. As an alternative to penalty function appeared the filter methods. A filter algorithm introduces a function that aggregates the constrained violations and constructs a biobjective problem. In this problem the step is accepted if it either reduces the objective function or the constrained violation. This implies that the filter methods are less parameter dependent than a penalty function. In this work, we present a new direct search method, based on simplex methods, for general constrained optimization that combines the features of the simplex method and filter methods. This method does not compute or approximate any derivatives, penalty constants or Lagrange multipliers. The basic idea of simplex filter algorithm is to construct an initial simplex and use the simplex to drive the search. We illustrate the behavior of our algorithm through some examples. The proposed methods were implemented in Java.

Derivative-free nonlinear optimization filter simplex

The filter method is a technique for solving nonlinear programming problems. The filter algorithm has two phases in each iteration. The first one reduces a measure of infeasibility, while in the second the objective function value is reduced. In real optimization problems, usually the objective function is not differentiable or its derivatives are unknown. In these cases it becomes essential to use optimization methods where the calculation of the derivatives or the verification of their existence is not necessary: direct search methods or derivative-free methods are examples of such techniques. In this work we present a new direct search method, based on simplex methods, for general constrained optimization that combines the features of simplex and filter methods. This method neither computes nor approximates derivatives, penalty constants or Lagrange multipliers.

Videovigilância, compressão e criptografia

Mestrado em Engenharia Electrotécnica e de Computadores

Automatic email organization

Introdução Actualmente, as mensagens electrónicas são consideradas um importante meio de comunicação. As mensagens electrónicas – vulgarmente conhecidas como emails – são utilizadas fácil e frequentemente para enviar e receber o mais variado tipo de informação. O seu uso tem diversos fins gerando diariamente um grande número de mensagens e, consequentemente um enorme volume de informação. Este grande volume de informação requer uma constante manipulação das mensagens de forma a manter o conjunto organizado. Tipicamente esta manipulação consiste em organizar as mensagens numa taxonomia. A taxonomia adoptada reflecte os interesses e as preferências particulares do utilizador. Motivação A organização manual de emails é uma actividade morosa e que consome tempo. A optimização deste processo através da implementação de um método automático, tende a melhorar a satisfação do utilizador. Cada vez mais existe a necessidade de encontrar novas soluções para a manipulação de conteúdo digital poupando esforços e custos ao utilizador; esta necessidade, concretamente no âmbito da manipulação de emails, motivou a realização deste trabalho. Hipótese O objectivo principal deste projecto consiste em permitir a organização ad-hoc de emails com um esforço reduzido por parte do utilizador. A metodologia proposta visa organizar os emails num conjunto de categorias, disjuntas, que reflectem as preferências do utilizador. A principal finalidade deste processo é produzir uma organização onde as mensagens sejam classificadas em classes apropriadas requerendo o mínimo número esforço possível por parte do utilizador. Para alcançar os objectivos estipulados, este projecto recorre a técnicas de mineração de texto, em especial categorização automática de texto, e aprendizagem activa. Para reduzir a necessidade de inquirir o utilizador – para etiquetar exemplos de acordo com as categorias desejadas – foi utilizado o algoritmo d-confidence. Processo de organização automática de emails O processo de organizar automaticamente emails é desenvolvido em três fases distintas: indexação, classificação e avaliação. Na primeira fase, fase de indexação, os emails passam por um processo transformativo de limpeza que visa essencialmente gerar uma representação dos emails adequada ao processamento automático. A segunda fase é a fase de classificação. Esta fase recorre ao conjunto de dados resultantes da fase anterior para produzir um modelo de classificação, aplicando-o posteriormente a novos emails. Partindo de uma matriz onde são representados emails, termos e os seus respectivos pesos, e um conjunto de exemplos classificados manualmente, um classificador é gerado a partir de um processo de aprendizagem. O classificador obtido é então aplicado ao conjunto de emails e a classificação de todos os emails é alcançada. O processo de classificação é feito com base num classificador de máquinas de vectores de suporte recorrendo ao algoritmo de aprendizagem activa d-confidence. O algoritmo d-confidence tem como objectivo propor ao utilizador os exemplos mais significativos para etiquetagem. Ao identificar os emails com informação mais relevante para o processo de aprendizagem, diminui-se o número de iterações e consequentemente o esforço exigido por parte dos utilizadores. A terceira e última fase é a fase de avaliação. Nesta fase a performance do processo de classificação e a eficiência do algoritmo d-confidence são avaliadas. O método de avaliação adoptado é o método de validação cruzada denominado 10-fold cross validation. Conclusões O processo de organização automática de emails foi desenvolvido com sucesso, a performance do classificador gerado e do algoritmo d-confidence foi relativamente boa. Em média as categorias apresentam taxas de erro relativamente baixas, a não ser as classes mais genéricas. O esforço exigido pelo utilizador foi reduzido, já que com a utilização do algoritmo d-confidence obteve-se uma taxa de erro próxima do valor final, mesmo com um número de casos etiquetados abaixo daquele que é requerido por um método supervisionado. É importante salientar, que além do processo automático de organização de emails, este projecto foi uma excelente oportunidade para adquirir conhecimento consistente sobre mineração de texto e sobre os processos de classificação automática e recuperação de informação. O estudo de áreas tão interessantes despertou novos interesses que consistem em verdadeiros desafios futuros.

The economics of language or how can language be an asset? General reflections on the European case and brief focus on the case of portuguese

In this paper, we will focus on the importance of languages as an asset to people and companies in knowledge-based society, giving special attention to the case of portuguese, not forgetting the role of Higher Education Institutions in preparing students to be part of the new creative multilingual and sucsessful class.

Effects of international diffusion of a general purpose technology on wage inequality

This paper studies the effects of the diffusion of a General Purpose Technology (GPT) that spreads first within the developed North country of its origin, and then to a developing South country. In the developed general equilibrium growth model, each final good can be produced by one of two technologies. Each technology is characterized by a specific labor complemented by a specific set of intermediate goods, which are enhanced periodically by Schumpeterian R&D activities. When quality reaches a threshold level, a GPT arises in one of the technologies and spreads first to the other technology within the North. Then, it propagates to the South, following a similar sequence. Since diffusion is not even, neither intra- nor inter-country, the GPT produces successive changes in the direction of technological knowledge and in inter- and intra-country wage inequality. Through this mechanism the different observed paths of wage inequality can be accommodated.

A general overview on hybrid and electric vehicles

The economical and environment impacts of fossil energies increased the interest for hybrid, battery and fuel-cell electric vehicles. Several demanding engineering challenges must be faced, motivated by different physical domains integration. This paper aims to present an overview on hybrid (HEV) and electric vehicles (EV) basic structures and features. In addition, it will try to point out some of the most relevant challenges to overcome for HEV and EV may be a solid option for the mobility issue. New developments in energy storage devices and energy management systems (EMS) are crucial to achieve this goal.