Recycling old screen-printed electrodes with newly designed plastic antibodies on the wall of carbon nanotubes as sensory element for in situ detection of bacterial toxins in water

Using low cost portable devices that enable a single analytical step for screening environmental contaminants is today a demanding issue. This concept is here tried out by recycling screen-printed electrodes that were to be disposed of and by choosing as sensory element a low cost material offering specific response for an environmental contaminant. Microcystins (MCs) were used as target analyte, for being dangerous toxins produced by cyanobacteria released into water bodies. The sensory element was a plastic antibody designed by surface imprinting with carefully selected monomers to ensure a specific response. These were designed on the wall of carbon nanotubes, taking advantage of their exceptional electrical properties. The stereochemical ability of the sensory material to detect MCs was checked by preparing blank materials where the imprinting stage was made without the template molecule. The novel sensory material for MCs was introduced in a polymeric matrix and evaluated against potentiometric measurements. Nernstian response was observed from 7.24 × 10−10 to 1.28 × 10−9 M in buffer solution (10 mM HEPES, 150 mM NaCl, pH 6.6), with average slopes of −62 mVdecade−1 and detection capabilities below 1 nM. The blank materials were unable to provide a linear response against log(concentration), showing only a slight potential change towards more positive potentials with increasing concentrations (while that ofthe plastic antibodies moved to more negative values), with a maximum rate of +33 mVdecade−1. The sensors presented good selectivity towards sulphate, iron and ammonium ions, and also chloroform and tetrachloroethylene (TCE) and fast response (<20 s). This concept was successfully tested on the analysis of spiked environmental water samples. The sensors were further applied onto recycled chips, comprehending one site for the reference electrode and two sites for different selective membranes, in a biparametric approach for “in situ” analysis.

Nanoparticles based Permeable Reactive Barriers as an Eco-efficient Technology for nitrate remediation in soil and groundwater

The need to increase agricultural yield led, among others, to an increase in the consumption of nitrogen based fertilizers. As a consequence, there are excessive concentrations of nitrates, the most abundant of the reactive nitrogen (Nr) species, in several areas of the world. The demographic changes and projected population growth for the next decades, and the economic shifts which are already shaping the near future are powerful drivers for a further intensification in the use of fertilizers, with a predicted increase of the nitrogen loads in soils. Nitrate easily diffuses in the subsurface environments, portraying high mobility in soils. Moreover, the presence of high nitrate loads in water has the potential to cause an array of health dysfunctions, such as methemoglobinemia and several cancers. Permeable Reactive Barriers (PRB) placed strategically relatively to the nitrate source constitute an effective technology to tackle nitrate pollution. Ergo, PRB avoid various adverse impacts resulting from the displacement of reactive nitrogen downstream along water bodies. A four stages literature review was carried out in 34 databases. Initially, a set of pertinent key words were identified to perform the initial databases searches. Then, the synonyms of those initial key words were used to carry out a second set of databases searches. The third stage comprised the identification of other additional relevant terms from the research papers identified in the previous two stages. Again, databases searches were performed with this third set of key words. The final step consisted of the identification of relevant papers from the bibliography of the relevant papers identified in the previous three stages of the literature review process. The set of papers identified as relevant for in-depth analysis were assessed considering a set of relevant characterization variables.

Gestão de Afluências Indevidas em Redes de Águas Residuais Urbanas

As afluências indevidas resultantes direta ou indiretamente da precipitação são um dos principais fatores que provocam graves problemas de carácter ambiental, estrutural e económico, no âmbito de um bom funcionamento dos sistemas separativos de saneamento e tratamento de águas residuais urbanas. Ao longo dos anos, com a expansão do serviço de saneamento à população, tem sido reconhecido que os caudais excedentes às redes de drenagem de águas residuais e estações de tratamento são um problema grave e para isso estão a ser criados critérios cada vez mais exigentes no domínio da gestão e operação destes sistemas de saneamento. Para uma melhor compreensão sobre a incidência das afluências indevidas nos sistemas de saneamento e nas estações de tratamento de águas residuais, é necessário realizar estudos de quantificação e caracterização no sistema de esgotos. Com a necessidade de compreender a plenitude e natureza deste problema, tornou-se necessário desenvolver metodologias com o objetivo de melhorar a eficiência e eficácia hidráulica dos sistemas de drenagem e de tratamento. Este trabalho tem como objetivo a análise quantitativa das afluências indevidas, recorrendo a um caso de estudo de uma bacia de drenagem de águas residuais. Para adquirir mais conhecimento sobre o tema foi necessário recolher várias metodologias existentes de maneira a selecionar, estudar e aplicar o método mais vantajoso. Nesta dissertação, foram utilizados dados disponibilizados pela SIMRIA, no que respeita aos caudais de bombagem da estação elevatória a que afluiu a rede em estudo, e pela INDAQUA Feira, no que respeita aos dados de precipitação.