Maximização da produção de paraxileno

Pretendeu-se, com o presente trabalho, efectuar um estudo sobre a possibilidade de aumentar a produção de paraxileno na unidade processual existente na refinaria da Galp no Porto. Foram estudados o conjunto de colunas T-0306 e T-0307 e a coluna T-0303, recorrendo ao uso do AspenPlus, na realização da simulação do processo nas condições actuais e para a realização da análise de sensibilidade, que permitiu verificar se o equipamento existente possui capacidade para satisfazer as necessidades exigidas pelo processo quando se pretende aumentar a produção. Com a simulação do processo, foi verificado que este já se encontra a laborar em condições óptimas. Na realização da análise de sensibilidade foram variados para o conjunto T-0306 e T- 0307, o caudal de alimentação entre 62780 e 95000 kg/h, o caudal de destilado da T-0306 entre 15833 e 23911 kg/h e o caudal de destilado da T-0307 entre 139 e os 235 kg/h. No caso da T-0303, foi variado o caudal de refinado entre 201240 e 304600 kg/h, o caudal de destilado e o caudal da corrente lateral, variam entre 77290 a 116930 kg/h. Pretendeu-se obter soluções que conseguissem cumprir as especificações relativas aos produtos obtidos, nomeadamente paraxileno com uma pureza de 99,6% e uma recuperação de 99%, tolueno com uma pureza de 97% e uma recuperação de 90% (T-0306 e T-0307). No caso da T- 0303, obter paraxileno com uma pureza de 2,23% e paradietilbenzeno com uma pureza de 99,0% e ambos com uma recuperação de 99%. Para as simulações que cumpriram as especificações anteriores, verificou-se se a energia transferida em aeroarrefecedores, fornalhas e permutadores excedem em 25% o seu valor de projecto. Em caso afirmativo isso significou o acréscimo de uma peça de equipamento idêntica à existente. A análise de sensibilidade permitiu concluir a separação é possível para os caudais actuais de extracto e refinado e para um aumento destes de 32, 40 e 50%. Foi ainda possível concluir que para os caudais actuais é necessária a colocação de novos aeroarrefecedores para as colunas T-0306 e T-0303 e de uma nova fornalha para a coluna T-0303. Para um aumento dos caudais de 32% para além das alterações referidas anteriormente é necessária a colocação de um novo aeroarrefecedor na coluna T-0307 e de uma nova fornalha da coluna T-0306. Se aumentarmos os caudais em 40% será também necessário o acréscimo de permutadores para a coluna T-0307. Para o aumento de 50%, os calores de permuta são excedidos em bastante mais do que 25%, em todos os aeroarrefecedores, permutadores e fornalhas. Uma vez que todas as colunas se encontram a funcionar acima da sua capacidade, concluiu-se que em ambos os casos seria necessária a montagem de uma segunda linha em paralelo e igual à existente. Implicando com esta alteração um investimento total de 10.439.574,36€.

Oxidative Leaching of metals from electronic waste with solutions based on quaternary ammonium salts

The treatment of electric and electronic waste (WEEE) is a problem which receives ever more attention. An inadequate treatment results in harmful products ending up in the environment. This project intends to investigate the possibilities of an alternative route for recycling of metals from printed circuit boards (PCBs) obtained from rejected computers. The process is based on aqueous solutions composed of an etchant, either 0.2 M CuCl2.2H2O or 0.2 M FeCl3.6H2O, and a quaternary ammonium salt (quat) such as choline chloride or chlormequat. These solutions are reminiscent of deep eutectic solvents (DES) based on quats. DES are quite similar to ionic liquids (ILs) and are used as well as alternative solvents with a great diversity of physical properties, making them attractive for replacement of hazardous, volatile solvents (e.g. VOCs). A remarkable difference between genuine DES and ILs with the solutions used in this project is the addition of rather large quantities of water. It is shown the presence of water has a lot of advantages on the leaching of metals, while the properties typical for DES still remain. The oxidizing capacities of Cu(II) stem from the existence of a stable Cu(I) component in quat based DES and thus the leaching stems from the activity of the Cu(II)/Cu(I) redox couple. The advantage of Fe(III) in combination with DES is the fact that the Fe(III)/Fe(II) redox couple becomes reversible, which is not true in pure water. This opens perspectives for regeneration of the etching solution. In this project the leaching of copper was studied as a function of gradual increasing water content from 0 - 100w% with the same concentration of copper chloride or iron(III) chloride at room temperature and 80ºC. The solutions were also tested on real PCBs. At room temperature a maximum leaching effect for copper was obtained with 30w% choline chloride with 0.2 M CuCl2.2H2O. The leaching effect is still stronger at 80°C, b ut of course these solutions are more energy consuming. For aluminium, tin, zinc and lead, the leaching was faster at 80ºC. Iron and nickel dissolved easily at room temperature. The solutions were not able to dissolve gold, silver, rhodium and platinum.

Removal of Cd(II), Zn(II) and Pb(II) from aqueous solutions by brown marine macro algae: kinetic modelling

Specific marine macro algae species abundant at the Portuguese coast (Laminaria hyperborea, Bifurcaria bifurcata, Sargassum muticum and Fucus spiralis) were shown to be effective for removing toxic metals (Cd(II), Zn(II) and Pb(II)) from aqueous solutions. The initial metal concentrations in solution were about 75–100 mg L−1. The observed biosorption capacities for cadmium, zinc and lead ions were in the ranges of 23.9–39.5, 18.6–32.0 and 32.3–50.4 mg g−1, respectively. Kinetic studies revealed that the metal uptake rate was rather fast, with 75% of the total amount occurring in the first 10 min for all algal species. Experimental data were well fitted by a pseudo-second order rate equation. The contribution of internal diffusion mechanism was significant only to the initial biosorption stage. Results indicate that all the studied macro algae species can provide an efficient and cost-effective technology for eliminating heavy metals from industrial effluents.

Economic, environmental and mixed objective functions in non-linear process optimization using simulated annealing and tabu search

Screening of topologies developed by hierarchical heuristic procedures can be carried out by comparing their optimal performance. In this work we will be exploiting mono-objective process optimization using two algorithms, simulated annealing and tabu search, and four different objective functions: two of the net present value type, one of them including environmental costs and two of the global potential impact type. The hydrodealkylation of toluene to produce benzene was used as case study, considering five topologies with different complexities mainly obtained by including or not liquid recycling and heat integration. The performance of the algorithms together with the objective functions was observed, analyzed and discussed from various perspectives: average deviation of results for each algorithm, capacity for producing high purity product, screening of topologies, objective functions robustness in screening of topologies, trade-offs between economic and environmental type objective functions and variability of optimum solutions.

Biocomplementation of SVE to achieve clean-up goals in soils contaminated with toluene and xylene

Soil vapor extraction (SVE) and bioremediation (BR) are two of the most common soil remediation technologies. Their application is widespread; however, both present limitations, namely related to the efficiencies of SVE on organic soils and to the remediation times of some BR processes. This work aimed to study the combination of these two technologies in order to verify the achievement of the legal clean-up goals in soil remediation projects involving seven different simulated soils separately contaminated with toluene and xylene. The remediations consisted of the application of SVE followed by biostimulation. The results show that the combination of these two technologies is effective and manages to achieve the clean-up goals imposed by the Spanish Legislation. Under the experimental conditions used in this work, SVE is sufficient for the remediation of soils, contaminated separately with toluene and xylene, with organic matter contents (OMC) below 4 %. In soils with higher OMC, the use of BR, as a complementary technology, and when the concentration of contaminant in the gas phase of the soil reaches values near 1 mg/L, allows the achievement of the clean-up goals. The OMC was a key parameter because it hindered SVE due to adsorption phenomena but enhanced the BR process because it acted as a microorganism and nutrient source.

Recycling of pultrusion production waste into innovative concrete-polymer composite solutions

In this study, the added value resultant from the incorporation of pultrusion production waste into polymer based concretes was assessed. For this purpose, different types of thermoset composite scrap material, proceeding from GFRP pultrusion manufacturing process, were mechanical shredded and milled into a fibrous-powdered material. Resultant GFRP recyclates, with two different size gradings, were added to polyester based mortars as fine aggregate and filler replacements, at various load contents between 4% up to 12% in weight of total mass. Flexural and compressive loading capacities were evaluated and found better than those of unmodified polymer mortars. Obtained results highlight the high potential of recycled GFRP pultrusion waste materials as efficient and sustainable admixtures for concrete and mortar-polymer composites, constituting an emergent waste management solution.

Investigation on AUTOSAR-Compliant Solutions for Many-Core Architectures

As of today, AUTOSAR is the de facto standard in the automotive industry, providing a common software architec- ture and development process for automotive applications. While this standard is originally written for singlecore operated Elec- tronic Control Units (ECU), new guidelines and recommendations have been added recently to provide support for multicore archi- tectures. This update came as a response to the steady increase of the number and complexity of the software functions embedded in modern vehicles, which call for the computing power of multicore execution environments. In this paper, we enumerate and analyze the design options and the challenges of porting AUTOSAR-based automotive applications onto multicore platforms. In particular, we investigate those options when considering the emerging many- core architectures that provide a more scalable environment than the traditional multicore systems. Such platforms are suitable to enable massive parallel execution, and their design is more suitable for partitioning and isolating the software components.