Devolução de doses unitárias: análise de uma prática diária

A Distribuição Individual Diária em Dose Unitária deve assegurar o maior rigor no Processo de Distribuição de Medicamentos, o que nem sempre se verificou no Hospital Pedro Hispano, dado que as Doses Unitárias devolvidas pelos Serviços de Internamento, nem sempre seguiam os Parâmetros de Qualidade. Assim, desenvolveu-se um estudo quasi-experimental, longitudinal, prospetivo e analítico, entre 1 de Março a 30 de Junho de 2012, no qual se analisaram as Doses Unitárias, devolvidas pelos Serviços de Internamento da Unidade Local de Saúde de Matosinhos a funcionam com Distribuição Individual Diária em Dose Unitária, tendo-se recolhido as não conformes relativamente aos Parâmetros de Qualidade instituídos. Na 1.ª fase do estudo (Recolha de amostras), foram contabilizadas 337 amostras, correspondentes a uma perda de 471 €. Na 2.ª fase do estudo (Implementação de acções correctivas às amostras previamente recolhidas), foram rejeitadas definitivamente 129 amostras, correspondentes a uma perda de 198 €. Na 4.ª fase do estudo (Segunda recolha de amostras), foram contabilizadas 228 amostras, correspondentes a uma perda de 199 €. A 3.ª fase do estudo incluiu a divulgação dos resultados às enfermeiras chefes dos serviços envolvidos no estudo e a 5.ª fase a comparação dos resultados obtidos na 1.ª, 2.ª e 4.ª fase do estudo. As amostras foram recolhidas em 16 serviços de internamento, sendo os valores monetários mais relevantes associados ao Espessante para alimentos líquidos e ao Imipeno + Cilastatina. A prática observada e sujeita a estudo aumenta os riscos associados ao consumo do medicamento e os custos relativos ao Processo, sendo de eliminar. A sua monitorização deve constituir uma rotina, uma vez que houve mudança de comportamentos. A redução/eliminação desta prática não conforme conduz à integração de novas tarefas com valor acrescentado, com aumento da fiabilidade do Processo.

Influence of grease rheology on thrust ball bearings friction torque

The friction torque and the operating temperatures in a thrust ball bearing were measured for seven different types of greases, including three biodegradable greases having low toxicity. These friction torque tests were performed using a modified Four-Ball machine. Rheological evaluations of the lubricating greases were made using a rheometer. Bleed oils were extracted from the greases and the dynamic viscosities were measured. In order to compare the performance of the lubricant greases in terms of friction, the grease characteristics were related to experimental results, showing that the interaction between thickener and base oil have strong influences in the bearing friction torque.

Friction and wear in thrust ball bearings lubricated with biodegradable greases

Thrust ball bearings lubricated with several different types of grease, including three biodegradable low-toxicity greases, were tested in a modified four-ball machine in order to evaluate the bearing friction torque. At the end of each test, grease samples were obtained and analysed through ferrography, allowing the quantification and evaluation of the bearing wear. In order to compare the grease performance in terms of friction and wear, a correlation between the grease characteristics (base oil, bleed oil, thickener structure, and rheological parameters) and the experimental results was established.

Friction torque in grease lubricated thrust ball bearings

Thrust ball bearings lubricated with several different greases were tested on a modified Four-Ball Machine, where the Four-Ball arrangement was replaced by a bearing assembly. The friction torque and operating temperatures in a thrust ball bearing were measured during the tests. At the end of each test a grease sample was analyzed through ferrographic techniques in order to quantify and evaluate bearing wear. A rolling bearing friction torque model was used and the coefficient of friction in full film lubrication was determined for each grease, depending on the operating conditions. The experimental results obtained showed that grease formulation had a very significant influence on friction torque and operating temperature. The friction torque depends on the viscosity of the grease base oil, on its nature (mineral, ester, PAO, etc.), on the coefficient of friction in full film conditions, but also on the interaction between grease thickener and base oil, which affected contact replenishment and contact starvation, and thus influenced the friction torque.