Safety climate and its relationship with furniture companies’ safety performance and workers’ risk acceptance

This study aims to analyse the relationship between safety climate and the level of risk acceptance, as well as its relationship with workplace safety performance. The sample includes 14 companies and 403 workers. The safety climate assessment was performed by the application of a Safety Climate in Wood Industries questionnaire and safety performance was assessed with a checklist. Judgements about risk acceptance were measured through questionnaires together with four other variables: trust, risk perception, benefit perception and emotion. Safety climate was found to be correlated with workgroup safety performance, and it also plays an important role in workers’ risk acceptance levels. Risk acceptance tends to be lower when safety climate scores of workgroups are high, and subsequently, their safety performance is better. These findings seem to be relevant, as they provide Occupational, Safety and Health practitioners with a better understanding of workers’ risk acceptance levels and of the differences among workgroups.

Multilevel model of safety climate for furniture industries

BACKGROUND: Furniture companies can analyze their safety status using quantitative measures. However, the data needed are not always available and the number of accidents is under-reported. Safety climate scales may be an alternative. However, there are no validated Portuguese scales that account for the specific attributes of the furniture sector. OBJECTIVE: The current study aims to develop and validate an instrument that uses a multilevel structure to measure the safety climate of the Portuguese furniture industry. METHODS: The Safety Climate in Wood Industries (SCWI) model was developed and applied to the safety climate analysis using three different scales: organizational, group and individual. A multilevel exploratory factor analysis was performed to analyze the factorial structure. The studied companies’ safety conditions were also analyzed. RESULTS: Different factorial structures were found between and within levels. In general, the results show the presence of a group-level safety climate. The scores of safety climates are directly and positively related to companies’ safety conditions; the organizational scale is the one that best reflects the actual safety conditions. CONCLUSIONS: The SCWI instrument allows for the identification of different safety climates in groups that comprise the same furniture company and it seems to reflect those groups’ safety conditions. The study also demonstrates the need for a multilevel analysis of the studied instrument.

Risk Acceptance in the Furniture Sector: Analysis of Acceptance Level and Relevant Influence Factors

Risk acceptance has been broadly discussed in relation to hazardous risk activities and/or technologies. A better understanding of risk acceptance in occupational settings is also important; however, studies on this topic are scarce. It seems important to understand the level of risk that stakeholders consider sufficiently low, how stakeholders form their opinion about risk, and why they adopt a certain attitude toward risk. Accordingly, the aim of this study is to examine risk acceptance in regard to occupational accidents in furniture industries. The safety climate analysis was conducted through the application of the Safety Climate in Wood Industries questionnaire. Judgments about risk acceptance, trust, risk perception, benefit perception, emotions, and moral values were measured. Several models were tested to explain occupational risk acceptance. The results showed that the level of risk acceptance decreased as the risk level increased. High-risk and death scenarios were assessed as unacceptable. Risk perception, emotions, and trust had an important influence on risk acceptance. Safety climate was correlated with risk acceptance and other variables that influence risk acceptance. These results are important for the risk assessment process in terms of defining risk acceptance criteria and strategies to reduce risks.

A survey of technologies and applications for climbing robots locomotion and adhesion

The interest in the development of climbing robots has grown rapidly in the last years. Climbing robots are useful devices that can be adopted in a variety of applications, such as maintenance and inspection in the process and construction industries. These systems are mainly adopted in places where direct access by a human operator is very expensive, because of the need for scaffolding, or very dangerous, due to the presence of an hostile environment. The main motivations are to increase the operation efficiency, by eliminating the costly assembly of scaffolding, or to protect human health and safety in hazardous tasks. Several climbing robots have already been developed, and other are under development, for applications ranging from cleaning to inspection of difficult to reach constructions. A wall climbing robot should not only be light, but also have large payload, so that it may reduce excessive adhesion forces and carry instrumentations during navigation. These machines should be capable of travelling over different types of surfaces, with different inclinations, such as floors, walls, or ceilings, and to walk between such surfaces (Elliot et al. (2006); Sattar et al. (2002)). Furthermore, they should be able of adapting and reconfiguring for various environment conditions and to be self-contained. Up to now, considerable research was devoted to these machines and various types of experimental models were already proposed (according to Chen et al. (2006), over 200 prototypes aimed at such applications had been developed in the world by the year 2006). However, we have to notice that the application of climbing robots is still limited. Apart from a couple successful industrialized products, most are only prototypes and few of them can be found in common use due to unsatisfactory performance in on-site tests (regarding aspects such as their speed, cost and reliability). Chen et al. (2006) present the main design problems affecting the system performance of climbing robots and also suggest solutions to these problems. The major two issues in the design of wall climbing robots are their locomotion and adhesion methods. With respect to the locomotion type, four types are often considered: the crawler, the wheeled, the legged and the propulsion robots. Although the crawler type is able to move relatively faster, it is not adequate to be applied in rough environments. On the other hand, the legged type easily copes with obstacles found in the environment, whereas generally its speed is lower and requires complex control systems. Regarding the adhesion to the surface, the robots should be able to produce a secure gripping force using a light-weight mechanism. The adhesion method is generally classified into four groups: suction force, magnetic, gripping to the surface and thrust force type. Nevertheless, recently new methods for assuring the adhesion, based in biological findings, were proposed. The vacuum type principle is light and easy to control though it presents the problem of supplying compressed air. An alternative, with costs in terms of weight, is the adoption of a vacuum pump. The magnetic type principle implies heavy actuators and is used only for ferromagnetic surfaces. The thrust force type robots make use of the forces developed by thrusters to adhere to the surfaces, but are used in very restricted and specific applications. Bearing these facts in mind, this chapter presents a survey of different applications and technologies adopted for the implementation of climbing robots locomotion and adhesion to surfaces, focusing on the new technologies that are recently being developed to fulfill these objectives. The chapter is organized as follows. Section two presents several applications of climbing robots. Sections three and four present the main locomotion principles, and the main "conventional" technologies for adhering to surfaces, respectively. Section five describes recent biological inspired technologies for robot adhesion to surfaces. Section six introduces several new architectures for climbing robots. Finally, section seven outlines the main conclusions.

Climbing robots: a survey of technologies and applications

The interest in the development of climbing robots is growing rapidly. Motivations are typically to increase the operation efficiency by obviating the costly assembly of scaffolding or to protect human health and safety in hazardous tasks. Climbing robots are starting to be developed for applications ranging from cleaning to inspection of difficult to reach constructions. These robots should be capable of travelling on different types of surfaces, with varying inclinations, such as floors, walls, ceilings, and to walk between such surfaces. Furthermore, these machines should be capable of adapting and reconfiguring for various environment conditions and to be self-contained. Regarding the adhesion to the surface, they should be able to produce a secure gripping force using a light-weight mechanism. This paper presents a survey of different applications and technologies proposed for the implementation of climbing robots.

Web survey system to discover the actual role of experience in learning in higher education: a case study

March 19 - 22, 2006, São Paulo, BRAZIL World Congress on Computer Science, Engineering and Technology Education

Avaliação da percepção do risco associado à segurança por parte dos profissionais de educação em jardins-de-infância

O estudo que ora se apresenta avalia a percepção de risco por parte dos profissionais de educação em jardins-de-infância do concelho da Maia. A avaliação da percepção foi realizada através de inquérito por questionário. No questionário são abordados temas como a formação que os inquiridos obtiveram, a tipologia dos acidentes ocorridos com as crianças, as condições estruturais do jardim-de-infância, os recreios, materiais e equipamentos, riscos eléctricos e organização de emergência. O grupo referente à segurança, higiene e saúde nos jardins-de-infância, que se encontra no questionário, foi estruturado com base na legislação e documentação de referência. A amostra recolhida diz respeito a 8 jardins-de-infância, tendo sido respondido por 34 educadoras de infância e 34 auxiliares de acção educativa. Constituíram objectivos deste estudo, verificar a percepção de risco por parte das educadoras de infância e das auxiliares de acção educativa; verificar diferenças de percepção de risco entre as educadoras de infância e as auxiliares de acção educativa sobre os diferentes temas; analisar a influência da formação recebida, idade, experiência profissional e categoria profissional na percepção do risco; Identificar qual o tema em que a amostra demonstra menos domínio. Após a análise dos resultados verificou-se que percepção das educadoras de infância e auxiliares de acção educativa era elevada, não se verificando diferenças significativamente entre as duas categorias profissionais, nem entre quem teve formação com não teve.

Abordagem da segurança, higiene e saúde na organização e gestão escolar

A escola é o centro de convergência que justifica e fundamenta os recursos alocados ao sistema educativo. Durante o normal funcionamento das escolas, as condições de segurança, salubridade dos edifícios e equipamentos devem ser previstas e mantidas para garantir a salvaguarda da saúde e bem-estar dos seus ocupantes. A responsabilidade sobre estas questões encontra-se transferida para os Órgãos de Gestão dos estabelecimentos educativos. Neste âmbito efectuou-se um estudo que objectivou caracterizar a organização e a gestão escolar, no contexto da segurança, higiene e saúde; conhecer a forma da organização e da gestão da emergência nos estabelecimentos de ensino e o grau de satisfação dos gestores escolares relativamente aspectos relacionados com a Segurança, Higiene e Saúde. Neste sentido, foi aplicado um inquérito por questionário on-line, dirigido aos directores dos agrupamentos de escolas e escolas únicas da Região Norte de Portugal. Na generalidade os resultados obtidos demonstraram que ao nível da organização e gestão da emergência é evidenciada alguma preocupação, constatando-se no entanto, que nem todas as escolas possuam delegado de segurança, algumas não possuem plano de segurança, apenas metade evidenciou a existência de projectos educativos em áreas relacionadas com a temática e não existe ainda uma participação efectiva no seio escolar por parte da comunidade. Os gestores escolares, relativamente ao grau de satisfação, referiram as condições das infra-estruturas e estado de conservação dos estabelecimentos escolares, como factores de maior descontentamento. Percepcionou-se que a gestão escolar é centrada nos problemas do quotidiano, não existindo uma planificação ou um programa legitimado de segurança, higiene e saúde a longo prazo. A análise à actuação do gestor escolar face à segurança e higiene, não pode efectuar-se alheia e separadamente do actual regime de autonomia, administração e gestão dos estabelecimentos públicos da educação pré-escolar e dos ensinos básico e secundário, porque o desempenho dos diferentes actores no processo educativo é por si condicionada. Cabe ao gestor escolar, na figura do Director(a) consagrar a segurança, higiene e saúde integradas na dinâmica escolar, promovendo um ambiente escolar mais saudável e seguro.

Segurança no circuito do medicamento citotóxico: contributos para a avaliação da realidade hospitalar em Portugal

Introdução: O medicamento citotóxico é definido pelas suas características de genotoxicidade, mutagenicidade, carcinogenicidade, teratogenicidade, toxicidade reprodutiva e toxicidade orgânica em baixas doses. Deste modo, existe uma grande preocupação no que concerne ao manuseamento deste tipo de medicamentos, devido aos riscos ocupacionais que podem surtir da exposição a que os profissionais de farmácia envolvidos estão sujeitos. Objectivos: Analisar a realidade da farmácia hospitalar face ao cumprimento das normas e procedimentos preconizados pelas actuais guidelines para o manuseamento seguro de medicamentos citotóxicos, e identificar as lacunas existentes, conduzindo à promoção de práticas centradas na minimização do risco de exposição/contaminação dos profissionais e do ambiente. Material e Métodos: Foi realizada uma pesquisa bibliográfica sistemática sobre o tema, utilizando-se como instrumento de recolha de dados um inquérito por questionário, em que os TDT de Farmácia foram abordados sobre os procedimentos verificados no hospital onde exercem actividade profissional. Resultados: Face ao cumprimento das normas na recepção, armazenamento e transporte de medicamentos citotóxicos, verifica-se que todos os hospitais se encontram acima da média. Apesar desta evidência, é na fase de transporte que se verifica um menor cumprimento. As principais lacunas detectadas foram ao nível da não utilização de EPI nas fases de recepção e armazenamento; a recepção de medicamentos citotóxicos em conjunto com outros medicamentos; a falta de um sistema de ventilação no local de armazenamento e, ainda, ausência de portas de correr e/ou gavetas fechadas nos carros de transporte de medicamentos citotóxicos. Conclusões: Os resultados deste estudo revelam alguma heterogeneidade de procedimentos nos hospitais Portugueses, sugerindo a necessidade de intervenção e reformulação do programa de segurança e gestão de risco desenvolvidos para o manuseamento de citotóxicos.

Safety high accuracy Context-Aware Matrix (CAM) making based on X.509 proxy certificate

Human Computer Interaction (HCl) is to interaction between computers and each person. And context-aware (CA) is very important one of HCI composition. In particular, if there are sequential or continuous tasks between users and devices, among users, and among devices etc, it is important to decide the next action using right CA. And to take perfect decision we have to get together all CA into a structure. We define that structure is Context-Aware Matrix (CAM) in this article. However to make exact decision is too hard for some problems like low accuracy, overhead and bad context by attacker etc. Many researcher has been studying to solve these problems. Moreover, still it has weak point HCI using in safety. In this Article, we propose CAM making include best selecting Server in each area. As a result, moving users could be taken the best way.

Influência da implementação de um sistema de gestão nas concessões rodoviárias

Se a implementação de Sistemas de Gestão dentro dos padrões recomendados pelas normas individuais de referência, já é prática comum nas empresas nacionais, a implementação de Sistemas Integrados de Gestão (SIG), verdadeiramente contidos uns nos outros como um só, é ainda invulgar. Constitui actualmente emblema de modernidade, enquanto aplicado à construção. Estudar todos os meandros e práticas associadas aos SIG, neste pequeno‐grande mundo, que é o das obras concessionadas, é de facto um grande desafio, não tanto pela novidade do conceito que representa, mas pela possibilidade de idealizar uma proposta de uma sistemática exequível, que me proponho apresentar. Assim, este trabalho baseia‐se numa pesquisa de informação teórica, bem como na prática da implementação de um Sistema Integrado numa empresa de referência no sector – a Empresa de Construções Amândio Carvalho, S.A. e neste caso, concretamente na obra ‐ “VRI: Aeroporto/IP4 – Lote 3”. O objectivo geral baseia‐se em diagnosticar as principais dificuldades e limitações enfrentadas por um sector de actividade, na adopção de um modelo específico de gestão da qualidade, ambiente e segurança no trabalho, baseando‐se nas normas de referência, ISO 9001: 2000, ISO 14001:2004 e OHSAS 18001: 2001. Normas estas, que embora agora tenham sido revistas a primeira e a última, na altura em que a obra decorreu, encontravam‐se em vigor. No caso especifico de estudo, comprova‐se a necessidade de implementação de um Sistema único, que atinja o nível de comprometimento dos recursos financeiros e humanos necessários para a execução de obra, respeitando os princípios apresentados pelo cliente. Pretende‐se ainda demonstrar que a adopção de Sistemas “desintegrados”, poderá conduzir ao colapso da estrutura montada para corresponder aos requisitos propostos.

Deterioração e reabilitação de estruturas de betão armado

Apesar da enorme evolução tecnológica, os prazos na construção são cada vez mais reduzidos e os custos mais controlados, verificando-se uma despreocupação no que diz respeito a aspetos como a qualidade e durabilidade da construção das estruturas. Desperta assim nos técnicos, donos-de-obra, entidades executantes e projetistas a necessidade de avaliar o estado de conservação das estruturas de betão armado. Esta dissertação tem como objetivo principal abordar as anomalias e os mecanismos de deterioração mais correntes, os métodos de ensaio destrutivos ou parcialmente destrutivos mais utilizados e adequados, e abordar algumas das técnicas de reparação e reforço das estruturas de betão armado. Os principais danos apresentados nas estruturas são devidos a agentes físicos, mecânicos, biológicos e químicos. Podem ser devidos a causas diretas (acidentais ou naturais), que acarretam uma ação concreta sobre os elementos estruturais, e causas indiretas (humanas), diretamente ligadas com erros de projeto. É primordial fazer-se o levantamento de todas as anomalias existentes para se recorrer a um método de inspeção e ensaio. Consoante a necessidade de informação e estado da estrutura são selecionados os ensaios a realizar, podendo ser realizados “in situ” ou em laboratório. As técnicas de reparação e reforço são vistas como métodos para melhorar as condições da estrutura ao nível da segurança, desempenho, habitabilidade e durabilidade, prevenindo a evolução dos mecanismos de deterioração.

Survey of trace elements (Al, As, Cd, Cr, Co, Hg, Mn, Ni, Pb, Se, and Si) in retail samples of flavoured and bottled waters

Concentrations of eleven trace elements (Al, As, Cd, Cr, Co, Hg, Mn, Ni, Pb, Se, and Si) were measured in 39 (natural and flavoured) water samples. Determinations were performed using graphite furnace electrothermetry for almost all elements (Al, As, Cd, Cr, Co, Mn, Ni, Pb, and Si). For Se determination hydride generation was used, and cold vapour generation for Hg. These techniques were coupled to atomic absorption spectrophotometry. The trace element content of still or sparkling natural waters changed from brand to brand. Significant differences between natural still and natural sparkling waters (p<0.001) were only apparent for Mn. The Mann–Whitney U-test was used to search for significant differences between flavoured and natural waters. The concentration of each element was compared with the presence of flavours, preservatives, acidifying agents, fruit juice and/or sweeteners, according to the labelled composition. It was shown that flavoured waters generally increase the trace element content. The addition of preservatives and acidifying regulators had a significant influence on Mn, Co, As and Si contents (p<0.05). Fruit juice can also be correlated to the increase of Co and As. Sweeteners did not provide any significant difference in Mn, Co, Se and Si content.

Monitoring of ochratoxin a exposure of the Portuguese population through a nationwide urine survey — winter 2007

Ochratoxin A (OTA) is a mycotoxin produced by a variety of fungi, such as Penicillium verrucosum and Aspergillium spp., which has been found to have a wide number of potentially deadly toxic effects, and can enter the human organism through a variety of means. It then finds its way into the bloodstream and, after a lengthy process, is eventually excreted through the urine. It can thus be detected in its original form not only in blood samples but also in this biological medium. As such, and in an attempt to evaluate the exposure of the Portuguese population to this mycotoxin, morning urine samples were collected during the Winter of 2007, from each of five geographically distinct Portuguese locations — Bragança, Porto, Coimbra, Alentejo, and Algarve — and subjected to extraction by immunoaffinity columns and to OTA quantification through liquid chromatography coupled with fluorescence detection. Prevalent incidence was higher than 95% with Coimbra being the exception (incidence of 73.3%). In nearly all locations, the OTA content of most samples was found to be above the limit of quantification (LOQ) of 0.008 ng/ml. Indeed, excluding Coimbra, with an OTA content level of 0.014 ng/ml, all regions featured content values over 0.021 ng/ml.

The impact of safety politics in the current globalization context

The globalization is a process of economical, social, cultural and political integration motivated by the needs generated by a consumption-orientated society and a set of factors that have led to its development, such as reducing transport costs, the technological advancement and the development of communication networks. However, the phenomenon of globalization has been accompanied by increasing levels of insecurity as a result of various types of threats and transnational crimes that the International Community seeks to control and minimize. Throughout this work, we examined how the globalization process has been developing and how nations are able to maintain security levels consistent with their economical status and social development, without disturbing the normal course of organizations’ economical activity and the well-being of people. From the investigation developed we concluded that, besides the confirmation that economic integration and the opening of markets have influence on internal consumption, market globalization and migrations have been causing modifications in the consumption habits. We also concluded that the security measures implemented by States or by the International Community affect international trade, but do not imply disproportionate costs or significant delays in transactions. Likewise, we concluded that the control measures implemented in international trade are sufficient to ensure the safety of the people and nations, enabling us to confirm two of the three conjectures raised in this study.