Representations of gender in the writings of St. Francis Xavier: an interdisciplinary approach

Francis Xavier’s Letters and Writings are eloquent narratives of a journey that absorbed the Saint’s entire life. His experiences and idiosyncrasies, values and categorizations are presented in a clear literate discourse. The missionary is rarely neutral in his opinions as he sustains his unmistakable and omnipresent objective: the conversion of peoples and the expansion of the Society of Jesus. Parallel with this objective, the reader is introduced to the individuals that Xavier meets or that he summons in his epistolary discourse. Letters and Writings presents us with a structured narrative peopled by all those who are subject to and objects of Xavier’s apostolic mission, by helpful and unhelpful persons of influence, and by leading and secondary actors. What is then the position of women, in the collective sense as well as in the individual sense, in the travels and goals that are the centre of Xavier’s Letters and Writings? What is the role of women, that secondary and suppressed term in the man/woman binomial, a dichotomy similar to the civilized/savage and European/native binomials that punctuate Xavier’s narratives and the historic context of his letters? Women are not absent from his writings, but it would be naïve to argue in favour of the author’s misogyny as much as of his “profound knowledge of the female heart”, to quote from Paulo Durão in "Women in the Letters of Saint Francis Xavier" (1952), the only paper on this subject published so far. We denote four great categories of women in the Letters and Writings: European Women, Converted Women, Women Who Profess another Religion, and Women as the Agents and Objects of Sin, the latter of which traverses the other three categories. They all depend on the context, circumstances and judgements of value that the author chooses to highlight and articulate.

Comparative analysis of the ground reaction forces, during the support phase, in a group of pregnant women on their 3rd trimester of pregnancy and in a group of not pregnant women

PURPOSE: To analyze and compare the Ground Reaction Forces (GRF), during the stance phase of walking in pregnant women in the 3rd trimester of pregnancy, and non pregnant women. METHODS: 20 women, 10 pregnant and 10 non pregnant, voluntarily took part in this study. GRF were measured (1000 Hz) using a force platform (BERTEC 4060-15), an amplifier (BERTEC AM 6300) and an analogical-digital converter of 16 Bits (Biopac). RESULTS: The study showed that there were significant differences among the two groups concerning absolute values of time of the stance phase. In what concerns to the normalized values the most significant differences were verified in the maximums values of vertical force (Fz3, Fz1) and in the impulse of the antero-posterior force (Fy2), taxes of growth of the vertical force, and in the period of time for the antero-posterior force (Fy) be null. CONCLUSIONS: It is easier for the pregnant to continue forward movement (push-off phase). O smaller growth rates in what concerns to the maximum of the vertical force (Fz1) for the pregnant, can be associated with a slower speed of gait, as an adaptation strategy to maintain the balance, to compensate the alterations in the position of her center of gravity due to the load increase. The data related to the antero-posterior component of the force (Fy), shows that there is a significant difference between the pregnant woman’s left foot and right foot, which accuses a different functional behavior in each one of the feet, during the propulsion phase (TS).

Antioxidant properties of hydroxycinnamic acids: a review of structure- activity relationships

Hydroxycinnamic acids (HCAs) are important phytochemicals possessing significant biological properties. Several investigators have studied in vitro antioxidant activity of HCAs in detail. In this review, we have gathered the studies focused on the structure-activity relationships (SARs) of these compounds that have used medicinal chemistry to generate more potent antioxidant molecules. Most of the reports indicated that the presence of an unsaturated bond on the side chain of HCAs is vital to their activity. The structural features that were reported to be of importance to the antioxidant activity were categorized as follows: modifications of the aromatic ring, which include alterations in the number and position of hydroxy groups and insertion of electron donating or withdrawing moieties as well as modifications of the carboxylic function that include esterification and amidation process. Furthermore, reports that have addressed the influence of physicochemical properties including redox potential, lipid solubility and dissociation constant on the antioxidant activity were also summarized. Finally, the pro-oxidant effect of HCAs in some test systems was addressed. Most of the investigations concluded that the presence of ortho-dihydroxy phenyl group (catechol moiety) is of significant importance to the antioxidant activity, while, the presence of three hydroxy groups does not necessarily improve the activity. Optimization of the structure of molecular leads is an important task of modern medicinal chemistry and its accomplishment relies on the careful assessment of SARs. SAR studies on HCAs can identify the most successful antioxidants that could be useful for management of oxidative stress-related diseases.

Experimental and numerical study on the evaluation of ventilation efficiency

Buildings account for 40% of total energy consumption in the European Union. The reduction of energy consumption in the buildings sector constitute an important measure needed to reduce the Union's energy dependency and greenhouse gas emissions. The Portuguese legislation incorporate this principles in order to regulate the energy performance of buildings. This energy performance should be accompanied by good conditions for the occupants of the buildings. According to EN 15251 (2007) the four factors that affect the occupant comfort in the buildings are: Indoor Air Quality (IAQ), thermal comfort, acoustics and lighting. Ventilation directly affects all except the lighting, so it is crucial to understand the performance of it. The ventilation efficiency concept therefore earn significance, because it is an attempt to quantify a parameter that can easily distinguish the different options for air diffusion in the spaces. The two indicators most internationally accepted are the Air Change Efficiency (ACE) and the Contaminant Removal Effectiveness (CRE). Nowadays with the developed of the Computational Fluid Dynamics (CFD) the behaviour of ventilation can be more easily predicted. Thirteen strategies of air diffusion were measured in a test chamber through the application of the tracer gas method, with the objective to validate the calculation by the MicroFlo module of the IES-VE software for this two indicators. The main conclusions from this work were: that the values of the numerical simulations are in agreement with experimental measurements; the value of the CRE is more dependent of the position of the contamination source, that the strategy used for the air diffusion; the ACE indicator is more appropriate for quantifying the quality of the air diffusion; the solutions to be adopted, to maximize the ventilation efficiency should be, the schemes that operate with low speeds of supply air and small differences between supply air temperature and the room temperature.

Optimizing the embedded heaters position in the pultrusion process using finite element analysis

This study is based on a previous experimental work in which embedded cylindrical heaters were applied to a pultrusion machine die, and resultant energetic performance compared with that achieved with the former heating system based on planar resistances. The previous work allowed to conclude that the use of embedded resistances enhances significantly the energetic performance of pultrusion process, leading to 57% decrease of energy consumption. However, the aforementioned study was developed with basis on an existing pultrusion die, which only allowed a single relative position for the heaters. In the present work, new relative positions for the heaters were investigated in order to optimize heat distribution process and energy consumption. Finite Elements Analysis was applied as an efficient tool to identify the best relative position of the heaters into the die, taking into account the usual parameters involved in the process and the control system already tested in the previous study. The analysis was firstly developed with basis on eight cylindrical heaters located in four different location plans. In a second phase, in order to refine the results, a new approach was adopted using sixteen heaters with the same total power. Final results allow to conclude that the correct positioning of the heaters can contribute to about 10% of energy consumption reduction, decreasing the production costs and leading to a better eco-efficiency of pultrusion process.

Adaptation and Localization of Open Source ERPs - The case of Parties in OFBiz

O software tem vindo a tornar-se uma parte importante de qualquer empresa, cobrindo várias áreas funcionais, tais como manufaturação, vendas ou recursos humanos. O facto de uma empresa possuir um software capaz de ligar todas ou a maior parte das suas áreas funcionais e de acomodar as suas regras de negócio permite que estas tenham acesso a dados em tempo real nos quais se podem basear para tomar decisões. Estes tipos de software podem ser categorizados como Enterprise resource planning (ERP). Tendo em conta que estes tipos de software têm um papel importante dentro de uma empresa, a aquisição dos mesmos é algo que deve ser bem estudado. As grandes empresas normalmente optam pela aquisição de soluções comerciais uma vez que estas tendem a ter mais funcionalidades, maior suporte e certificações. Os ERPs comerciais representam, no entanto, um esforço elevado para que a sua compra possa ser feita, o que limita a possibilidade de aquisição dos mesmos por parte de pequenas ou médias empresas. No entanto, tal como acontece com a maior parte dos tipos de software, existem alternativas open-source. Se nos colocássemos na posição de uma pequena empresa, a tentar iniciar o seu negócio em Portugal, que tipo de ERP seria suficiente para os nossos requisitos? Teríamos que optar por comprar uma solução comercial, ou uma solução open-source seria suficiente? E se optássemos por desenvolver uma solução à medida? Esta tese irá responder a estas questões focando-se apenas num dos componentes base de qualquer ERP, a gestão de entidades. O componente de gestão de entidades é responsável por gerir todas as entidades com as quais a empresa interage abrangindo colaboradores, clientes, fornecedores, etc. A nível de funcionalidades será feita uma comparação entre um ERP comercial e um ERP open-source. Como os ERPs tendem a ser soluções muito genéricas é comum que estes não implementem todos os requisitos de um negócio em particular, como tal os ERPs precisam de ser extensíveis e adaptáveis. Para perceber até que ponto a solução open-source é extensível será feita uma análise técnica ao seu código fonte e será feita uma implementação parcial de um gerador de ficheiros de auditoria requerido pela lei Portuguesa, o SAF-T (PT). Ao estudar e adaptar a solução open-source podemos especificar o que teria que ser desenvolvido para podermos criar uma solução à medida de raiz.