An optimal scheduling problem in distribution networks considering V2G

This paper addresses the problem of energy resource scheduling. An aggregator will manage all distributed resources connected to its distribution network, including distributed generation based on renewable energy resources, demand response, storage systems, and electrical gridable vehicles. The use of gridable vehicles will have a significant impact on power systems management, especially in distribution networks. Therefore, the inclusion of vehicles in the optimal scheduling problem will be very important in future network management. The proposed particle swarm optimization approach is compared with a reference methodology based on mixed integer non-linear programming, implemented in GAMS, to evaluate the effectiveness of the proposed methodology. The paper includes a case study that consider a 32 bus distribution network with 66 distributed generators, 32 loads and 50 electric vehicles.

Intelligent energy resources management in the context of smart grids

Smart grids are envisaged as infrastructures able to accommodate all centralized and distributed energy resources (DER), including intensive use of renewable and distributed generation (DG), storage, demand response (DR), and also electric vehicles (EV), from which plug-in vehicles, i.e. gridable vehicles, are especially relevant. Moreover, smart grids must accommodate a large number of diverse types or players in the context of a competitive business environment. Smart grids should also provide the required means to efficiently manage all these resources what is especially important in order to make the better possible use of renewable based power generation, namely to minimize wind curtailment. An integrated approach, considering all the available energy resources, including demand response and storage, is crucial to attain these goals. This paper proposes a methodology for energy resource management that considers several Virtual Power Players (VPPs) managing a network with high penetration of distributed generation, demand response, storage units and network reconfiguration. The resources are controlled through a flexible SCADA (Supervisory Control And Data Acquisition) system that can be accessed by the evolved entities (VPPs) under contracted use conditions. A case study evidences the advantages of the proposed methodology to support a Virtual Power Player (VPP) managing the energy resources that it can access in an incident situation.

SCADA House Intelligent Management for Energy Efficiency Analysis in Domestic Consumers

The implementation of smart homes allows the domestic consumer to be an active player in the context of the Smart Grid (SG). This paper presents an intelligent house management system that is being developed by the authors to manage, in real time, the power consumption, the micro generation system, the charge and discharge of the electric or plug-in hybrid vehicles, and the participation in Demand Response (DR) programs. The paper proposes a method for the energy efficiency analysis of a domestic consumer using the SCADA House Intelligent Management (SHIM) system. The main goal of the present paper is to demonstrate the economic benefits of the implemented method. The case study considers the consumption data of some real cases of Portuguese house consumption over 30 days of June of 2012, the Portuguese real energy price, the implementation of the power limits at different times of the day and the economic benefits analysis.

Adaptação do programa PAC-Pórticos ao EC2 e sua integração com o conceito BIM

Atualmente existe uma grande variedade de programas de cálculo automático de estruturas de betão armado disponíveis no mercado, pois estes, cada vez mais, são inerentes ao desenvolvimento de cada projeto de estruturas. O PAC-Pórticos foi um dos primeiros a chegar ao mercado nacional surgindo no início da década de noventa. Foi totalmente desenvolvido em Portugal, tendo tido bastante sucesso nas suas vendas a nível nacional. O PAC-Pórticos não está preparado para operar diretamente nos mais recentes sistemas operativos nem foi programado para dimensionar os diversos elementos de betão armado seguindo os termos das normas mais recentes (Eurocódigos). O tema do presente trabalho vai de encontro aos atuais problemas do programa, assim sendo, definiu-se como primeiro objetivo a adaptação do PAC-Pórticos à regulamentação europeia para o betão armado. Numa 1ª fase, para a adaptação do PAC-Pórticos aos novos códigos, foi necessário estudar o programa em si, perceber o seu funcionamento e posteriormente realizar uma comparação entre a legislação para qual o software está programado, o Regulamento de Estruturas de Betão Armado e Pré-Esforçado (ainda em vigor) e a Norma Europeia correspondente a EN 1992-1-1 (Eurocódigo 2). Seguidamente, procedeu-se ao estudo e adaptação de todas as sub-rotinas de cálculo do PAC-Pórticos para o dimensionamento de vigas e pilares, tendo finalmente sido testado o novo código e comprovados os resultados obtidos com o mesmo. Na realização do presente trabalho, não foi ignorada a importância crescente da metodologia BIM que, nos dias de hoje, tende a ser implementada nos programas de cálculo de engenharia civil. Neste âmbito, o segundo objetivo é o de conseguir visualizar uma solução obtida do PAC-Pórticos numa qualquer ferramenta tridimensional BIM. Para tal, foram ponderadas várias hipóteses, mas optou-se por criar dois plug-in para o programa AutoCAD da Autodesk. O primeiro destes plug-in contempla o desenho das vigas e o segundo para os pilares, ambos em 3D e elaborados de forma automática.

Classificação de veículos híbridos - evolução crescente do grau de electrificação

Em resposta aos impactos ambientais e limitações dos combustíveis fósseis, assistiu-se nas últimas décadas a um acentuado desenvolvimento dos veículos híbridos elétricos convencionais. A sua proliferação encontra-se hoje bem disseminada, em praticamente todas as gamas, refletindo a confiança dos consumidores. Com vista a atenuar ainda mais o uso dos combustíveis fósseis, a tendência é de aumentar o nível de eletrificação nas versões híbridas mais recentes, bem como da oferta de versões puramente elétricas. No entanto, a evolução dos últimos anos, quer ao nível da aposta por parte dos fabricantes, quer ao nível do volume de vendas, parece indiciar uma nova fase de proliferação destes veículos, a qual se encontra ainda a dar os primeiros passos. Este artigo apresenta uma classificação dos veículos híbridos, em função do nível de eletrificação do sistema de propulsão. Após uma breve referência aos veículos puramente elétricos, fazem-se algumas considerações acerca do impacto mundial dos veículos híbridos Plug-in e puramente elétricos, nos últimos 5 anos.

Effect of plug-filling, Testing velocity and temperature on the tensile strength of strap repairs on aluminium structures

In this work, an experimental study was performed on the influence of plug-filling, loading rate and temperature on the tensile strength of single-strap (SS) and double-strap (DS) repairs on aluminium structures. Whilst the main purpose of this work was to evaluate the feasibility of plug-filling for the strength improvement of these repairs, a parallel study was carried out to assess the sensitivity of the adhesive to external features that can affect the repairs performance, such as the rate of loading and environmental temperature. The experimental programme included repairs with different values of overlap length (L O = 10, 20 and 30 mm), and with and without plug-filling, whose results were interpreted in light of experimental evidence of the fracture modes and typical stress distributions for bonded repairs. The influence of the testing speed on the repairs strength was also addressed (considering 0.5, 5 and 25 mm/min). Accounting for the temperature effects, tests were carried out at room temperature (≈23°C), 50 and 80°C. This permitted a comparative evaluation of the adhesive tested below and above the glass transition temperature (T g), established by the manufacturer as 67°C. The combined influence of these two parameters on the repairs strength was also analysed. According to the results obtained from this work, design guidelines for repairing aluminium structures were

Rapid automated method for on-site determination of sulfadiazine in fish farming: a stainless steel veterinary syringe coated with a selective membrane of PVC serving as a potentiometric detector in a flow-injection-analysis system

Sulfadiazine is an antibiotic of the sulfonamide group and is used as a veterinary drug in fish farming. Monitoring it in the tanks is fundamental to control the applied doses and avoid environmental dissemination. Pursuing this goal, we included a novel potentiometric design in a flow-injection assembly. The electrode body was a stainless steel needle veterinary syringe of 0.8-mm inner diameter. A selective membrane of PVC acted as a sensory surface. Its composition, the length of the electrode, and other flow variables were optimized. The best performance was obtained for sensors of 1.5-cm length and a membrane composition of 33% PVC, 66% onitrophenyloctyl ether, 1% ion exchanger, and a small amount of a cationic additive. It exhibited Nernstian slopes of 61.0 mV decade-1 down to 1.0×10-5 mol L-1, with a limit of detection of 3.1×10-6 mol L-1 in flowing media. All necessary pH/ionic strength adjustments were performed online by merging the sample plug with a buffer carrier of 4-(2-hydroxyethyl)-1-piperazineethanesulfonic acid, pH 4.9. The sensor exhibited the advantages of a fast response time (less than 15 s), long operational lifetime (60 days), and good selectivity for chloride, nitrite, acetate, tartrate, citrate, and ascorbate. The flow setup was successfully applied to the analysis of aquaculture waters. The analytical results were validated against those obtained with liquid chromatography–tandem mass spectrometry procedures. The sampling rate was about 84 samples per hour and recoveries ranged from 95.9 to 106.9%.