Effect of hole drilling at the overlap on the strength of single-lap joints

Bonded unions are gaining importance in many fields of manufacturing owing to a significant number of advantages to the traditional fastening, riveting, bolting and welding techniques. Between the available bonding configurations, the single-lap joint is the most commonly used and studied by the scientific community due to its simplicity, although it endures significant bending due to the non-collinear load path, which negatively affects its load bearing capabilities. The use of material or geometric changes in single-lap joints is widely documented in the literature to reduce this handicap, acting by reduction of peel and shear peak stresses at the damage initiation sites in structures or alterations of the failure mechanism emerging from local modifications. In this work, the effect of hole drilling at the overlap on the strength of single-lap joints was analyzed experimentally with two main purposes: (1) to check whether or not the anchorage effect of the adhesive within the holes is more preponderant than the stress concentrations near the holes, arising from the sharp edges, and modification of the joints straining behaviour (strength improvement or reduction, respectively) and (2) picturing a real scenario on which the components to be bonded are modified by some external factor (e.g. retrofitting of decaying/old-fashioned fastened unions). Tests were made with two adhesives (a brittle and a ductile one) varying the adherend thickness and the number, layout and diameter of the holes. Experimental testing showed that the joints strength never increases from the un-modified condition, showing a varying degree of weakening, depending on the selected adhesive and hole drilling configuration.

The rebirth of an old language: issues of gender equality in Kazakhsstan

The existing language situation in Kazakhstan, while peaceful, is not without some tension. We propose to analyze here some questions we consider relevant in the frame of cultural globalization and gender equality, such as: free from Russian imperialism, could Kazakhstan become an easy prey of Turkey’s “imperialist dream”? Could these traditionally Muslim people be soon facing the end of religious tolerance and gender equality, becoming this new old language an easy instrument for the infiltration in the country of fundamentalism (it has already crossed the boarders of Uzbekistan), leading to a gradual deterioration of its rich multicultural relations? The present structure of the language is still very fragile: there are three main dialects and many academics defend the re-introduction of the Latin alphabet, thus enlarging the possibility of cultural “contamination” by making the transmission of fundamentalist ideas still easier through neighbour countries like Azerbaijan, Uzbekistan and Turkmenistan (their languages belong to the same sub-group of Common Turkic), where the Latin alphabet is already in use, and where the ground for such ideas shown itself very fruitful.

Shall I compare thee to an old man? A velhice em William Shakespeare e Rugénio de Andrade

A velhice é um tema que emerge com frequência nas obras de William Shakespeare e de Eugénio de Andrade, sempre num tom disfórico. Em ambos, a última das sete idades do ser humano, acarreta uma série de consequências negativas: a) A beleza é efémera e os amantes abandonam; b) O declínio físico e mental é inevitável; c) Na fase final da vida, sobrevém o temor da morte. Para expressarem o efeito da senectude, Shakespeare e Eugénio recorrem a comparações semelhantes entre o ser humano e o Outono (velhice) e o Inverno (morte). Neste artigo, numa perspectiva comparada e intertextual, exemplifico e analiso essas melancólicas e dolorosas imagens. Para tanto, recorro à obra dos dois escritores, à opinião de ensaístas reputados na área dos estudos literários e da psicologia da morte e, naturalmente, à minha opinião.

Recycling old screen-printed electrodes with newly designed plastic antibodies on the wall of carbon nanotubes as sensory element for in situ detection of bacterial toxins in water

Using low cost portable devices that enable a single analytical step for screening environmental contaminants is today a demanding issue. This concept is here tried out by recycling screen-printed electrodes that were to be disposed of and by choosing as sensory element a low cost material offering specific response for an environmental contaminant. Microcystins (MCs) were used as target analyte, for being dangerous toxins produced by cyanobacteria released into water bodies. The sensory element was a plastic antibody designed by surface imprinting with carefully selected monomers to ensure a specific response. These were designed on the wall of carbon nanotubes, taking advantage of their exceptional electrical properties. The stereochemical ability of the sensory material to detect MCs was checked by preparing blank materials where the imprinting stage was made without the template molecule. The novel sensory material for MCs was introduced in a polymeric matrix and evaluated against potentiometric measurements. Nernstian response was observed from 7.24 × 10−10 to 1.28 × 10−9 M in buffer solution (10 mM HEPES, 150 mM NaCl, pH 6.6), with average slopes of −62 mVdecade−1 and detection capabilities below 1 nM. The blank materials were unable to provide a linear response against log(concentration), showing only a slight potential change towards more positive potentials with increasing concentrations (while that ofthe plastic antibodies moved to more negative values), with a maximum rate of +33 mVdecade−1. The sensors presented good selectivity towards sulphate, iron and ammonium ions, and also chloroform and tetrachloroethylene (TCE) and fast response (<20 s). This concept was successfully tested on the analysis of spiked environmental water samples. The sensors were further applied onto recycled chips, comprehending one site for the reference electrode and two sites for different selective membranes, in a biparametric approach for “in situ” analysis.

Information professionals in business context: new professionals, old skills

This communication aims to present some reflections regarding the importance of information in organizational context, especially in business context. The ability to produce and to share expertise and knowledge among its employees is now a key factor in the success of any organization. However, it’s also true that workers are increasingly feeling that too much information can hurt their performance. The existence of skilled professionals able to organize, evaluate, select and disseminate information in organizations appears to be a prerequisite for success. The skills necessary for the formation of a professional devoted to the management of information and knowledge in the context of business organizations will be analysed. Then data collected in two focus group discussion with students from a graduate course in Business Information, from Polytechnic Institute of Porto, Portugal, a will be examined.