Analysis of temperature time-series: embedding dynamics into the MDS method

Global warming and the associated climate changes are being the subject of intensive research due to their major impact on social, economic and health aspects of the human life. Surface temperature time-series characterise Earth as a slow dynamics spatiotemporal system, evidencing long memory behaviour, typical of fractional order systems. Such phenomena are difficult to model and analyse, demanding for alternative approaches. This paper studies the complex correlations between global temperature time-series using the Multidimensional scaling (MDS) approach. MDS provides a graphical representation of the pattern of climatic similarities between regions around the globe. The similarities are quantified through two mathematical indices that correlate the monthly average temperatures observed in meteorological stations, over a given period of time. Furthermore, time dynamics is analysed by performing the MDS analysis over slices sampling the time series. MDS generates maps describing the stations’ locus in the perspective that, if they are perceived to be similar to each other, then they are placed on the map forming clusters. We show that MDS provides an intuitive and useful visual representation of the complex relationships that are present among temperature time-series, which are not perceived on traditional geographic maps. Moreover, MDS avoids sensitivity to the irregular distribution density of the meteorological stations.

A framework for realistic real-time walkthroughs in a VR distributed environment

Virtual and augmented reality (VR/AR) are increasingly being used in various business scenarios and are important driving forces in technology development. However the usage of these technologies in the home environment is restricted due to several factors including lack of low-cost (from the client point of view) highperformance solutions. In this paper we present a general client/server rendering architecture based on Real-Time concepts, including support for a wide range of client platforms and applications. The idea of focusing on the real-time behaviour of all components involved in distributed IP-based VR scenarios is new and has not been addressed before, except for simple sub-solutions. This is considered as “the most significant problem with the IP environment” [1]. Thus, the most important contribution of this research will be the holistic approach, in which networking, end-systems and rendering aspects are integrated into a cost-effective infrastructure for building distributed real-time VR applications on IP-based networks.

Designing real-time systems based on mono-master Profibus-DP networks

Profibus networks are widely used as the communication infrastructure for supporting distributed computer-controlled applications. Most of the times, these applications impose strict real-time requirements. Profibus-DP has gradually become the preferred Profibus application profile. It is usually implemented as a mono-master Profibus network, and is optimised for speed and efficiency. The aim of this paper is to analyse the real-time behaviour of this class of Profibus networks. Importantly, we develop a new methodology for evaluating the worst-case message response time in systems where high-priority and cyclic low-priority Profibus traffic coexist. The proposed analysis constitutes a powerful tool to guarantee prior to runtime the real-time behaviour of a distributed computer-controlled system based on a Profibus network, where the realtime traffic is supported either by high-priority or by cyclic poll Profibus messages.

Evaluating P-NET message's response time with fixed priority queuing at application process level

P-NET is a multi-master fieldbus standard based on a virtual token passing scheme. In P-NET each master is allowed to transmit only one message per token visit. In the worst-case, the communication response time can be derived considering that, in each token cycle, all stations use the token to transmit a message. In this paper, we define a more sophisticated P-NET model, which considers the actual token utilisation. We then analyse the possibility of implementing a local priority-based scheduling policy to improve the real-time behaviour of P-NET.

Cycle time properties of the PROFIBUS timed-token protocol

A recent trend in distributed computer-controlled systems (DCCS) is to interconnect the distributed computing elements by means of multi-point broadcast networks. Since the network medium is shared between a number of network nodes, access contention exists and must be solved by a medium access control (MAC) protocol. Usually, DCCS impose real-time constraints. In essence, by real-time constraints we mean that traffic must be sent and received within a bounded interval, otherwise a timing fault is said to occur. This motivates the use of communication networks with a MAC protocol that guarantees bounded access and response times to message requests. PROFIBUS is a communication network in which the MAC protocol is based on a simplified version of the timed-token protocol. In this paper we address the cycle time properties of the PROFIBUS MAC protocol, since the knowledge of these properties is of paramount importance for guaranteeing the real-time behaviour of a distributed computer-controlled system which is supported by this type of network.

Real-time communications over hybrid wired/wireless PROFIBUS-based networks

PROFIBUS is an international standard (IEC 61158) for factory-floor communications, with some hundreds of thousands of world-wide installations. However, it does not include any wireless capabilities. In this paper we propose a hybrid wired/wireless PROFIBUS solution where most of the design options are made in order to guarantee the proper real-time behaviour of the overall network. We address the timing unpredictability problems placed by the co-existence of heterogeneous transmission media in the same network. Moreover, we propose a novel solution to provide inter-cell mobility to PROFIBUS wireless nodes.

Guaranteeing real-time message deadlines in PROFIBUS networks

The paper provides a comprehensive study on how to use Profibus networks to support real time communications, that is, ensuring the transmission of the real time messages before their deadlines. Profibus is based on a simplified Timed Token (TT) protocol, which is a well proved solution for real time communication systems. However, Profibus differences from the TT protocol prevent the application of the usual TT analysis. The main reason is that, conversely to the TT protocol, in the worst case, only one high priority message is processed per token visit. The major contribution of the paper is to prove that, despite this shortcoming, it is possible to guarantee communication real time behaviour with the Profibus protocol

SPARTS: simulator for power aware and real-time systems

Real-time systems demand guaranteed and predictable run-time behaviour in order to ensure that no task has missed its deadline. Over the years we are witnessing an ever increasing demand for functionality enhancements in the embedded real-time systems. Along with the functionalities, the design itself grows more complex. Posed constraints, such as energy consumption, time, and space bounds, also require attention and proper handling. Additionally, efficient scheduling algorithms, as proven through analyses and simulations, often impose requirements that have significant run-time cost, specially in the context of multi-core systems. In order to further investigate the behaviour of such systems to quantify and compare these overheads involved, we have developed the SPARTS, a simulator of a generic embedded real- time device. The tasks in the simulator are described by externally visible parameters (e.g. minimum inter-arrival, sporadicity, WCET, BCET, etc.), rather than the code of the tasks. While our current implementation is primarily focused on our immediate needs in the area of power-aware scheduling, it is designed to be extensible to accommodate different task properties, scheduling algorithms and/or hardware models for the application in wide variety of simulations. The source code of the SPARTS is available for download at [1].

Real-time communications over wired/wireless PROFIBUS networks supporting inter-cell mobility

PROFIBUS is an international standard (IEC 61158, EN 50170) for factory-floor communications, with several thousands of installations worldwide. Taking into account the increasing need for mobile devices in industrial environments, one obvious solution is to extend traditional wired PROFIBUS networks with wireless capabilities. In this paper, we outline the major aspects of a hybrid wired/wireless PROFIBUS-based architecture, where most of the design options were made in order to guarantee the real-time behaviour of the overall network. We also introduce the timing unpredictability problems resulting from the co-existence of heterogeneous physical media in the same network. However, the major focus of this paper is on how to guarantee real-time communications in such a hybrid network, where nodes (and whole segments) can move between different radio cells (inter-cell mobility). Assuming a simple mobility management mechanism based on mobile nodes performing periodic radio channel assessment and switching, we propose a methodology to compute values for specific parameters that enable an optimal (minimum) and bounded duration of the handoff procedure.

Avaliação da qualidade do ar interior e estudos CFD em espaços do ISEP

Mestrado em Engenharia Química. Ramo Tecnologias de Protecção Ambiental.

Modelos e interfaces gráficos para objectos de aprendizagem na área da saúde

A educação é uma área bastante importante no desenvolvimento humano e tem vindo a adaptar-se às novas tecnologias. Tentam-se encontrar novas maneiras de ensinar de modo a obter um rendimento cada vez maior na aprendizagem das pessoas. Com o aparecimento de novas tecnologias como os computadores e a Internet, a concepção de aplicações digitais educativas cresceu e a necessidade de instruir cada vez melhor os alunos leva a que estas aplicações precisem de um interface que consiga leccionar de uma maneira rápida e eficiente. A combinação entre o ensino com o auxílio dessas novas tecnologias e a educação à distância deu origem ao e-Learning (ensino à distância). Através do ensino à distância, as possibilidades de aumento de conhecimento dos alunos aumentaram e a informação necessária tornou-se disponível a qualquer hora em qualquer lugar com acesso à Internet. Mas os cursos criados online tinham custos altos e levavam muito tempo a preparar o que gerou um problema para quem os criava. Para recuperar o investimento realizado decidiu-se dividir os conteúdos em módulos capazes de serem reaproveitados em diferentes contextos e diferentes tipos de utilizadores. Estes conteúdos modulares foram denominados Objectos de Aprendizagem. Nesta tese, é abordado o estudo dos Objectos de Aprendizagem e a sua evolução ao longo dos tempos em termos de interface com o utilizador. A concepção de um interface que seja natural e simples de utilizar nem sempre é fácil e independentemente do contexto em que se insere, requer algum conhecimento de regras que façam com que o utilizador que use determinada aplicação consiga trabalhar com um mínimo de desempenho. Na concepção de Objectos de Aprendizagem, áreas de complexidade elevada como a Medicina levam a que professores ou doutores sintam alguma dificuldade em criar um interface com conteúdos educativos capaz de ensinar com eficiência os alunos, devido ao facto de grande parte deles desconhecerem as técnicas e regras que levam ao desenvolvimento de um interface de uma aplicação. Através do estudo dessas regras e estilos de interacção torna-se mais fácil a criação de um bom interface e ao longo desta tese será estudado e proposto uma ferramenta que ajude tanto na criação de Objectos de Aprendizagem como na concepção do respectivo interface.

Experiences on the implementation of a cooperative embedded system framework

As the complexity of embedded systems increases, multiple services have to compete for the limited resources of a single device. This situation is particularly critical for small embedded devices used in consumer electronics, telecommunication, industrial automation, or automotive systems. In fact, in order to satisfy a set of constraints related to weight, space, and energy consumption, these systems are typically built using microprocessors with lower processing power and limited resources. The CooperatES framework has recently been proposed to tackle these challenges, allowing resource constrained devices to collectively execute services with their neighbours in order to fulfil the complex Quality of Service (QoS) constraints imposed by users and applications. In order to demonstrate the framework's concepts, a prototype is being implemented in the Android platform. This paper discusses key challenges that must be addressed and possible directions to incorporate the desired real-time behaviour in Android.

Hybrid wired/wireless PROFIBUS architectures: performance study based on simulation models

The problem of providing a hybrid wired/wireless communications for factory automation systems is still an open issue, notwithstanding the fact that already there are some solutions. This paper describes the role of simulation tools on the validation and performance analysis of two wireless extensions for the PROFIBUS protocol. In one of them, the Intermediate Systems, which connect wired and wireless network segments, operate as repeaters. In the other one the Intermediate Systems operate as bridge. We also describe how the analytical analysis proposed for these kinds of networks can be used for the setting of some network parameters and for the guaranteeing real-time behaviour of the system. Additionally, we also compare the bridge-based solution simulation results with the analytical results.

Particle swarm optimization: dynamical analysis through fractional calculus

This chapter considers the particle swarm optimization algorithm as a system, whose dynamics is studied from the point of view of fractional calculus. In this study some initial swarm particles are randomly changed, for the system stimulation, and its response is compared with a non-perturbed reference response. The perturbation effect in the PSO evolution is observed in the perspective of the fitness time behaviour of the best particle. The dynamics is represented through the median of a sample of experiments, while adopting the Fourier analysis for describing the phenomena. The influence upon the global dynamics is also analyzed. Two main issues are reported: the PSO dynamics when the system is subjected to random perturbations, and its modelling with fractional order transfer functions.

Ferramenta de estudo para alunos de medicina na especialidade de dermatologia

A vulgarização do uso de dispositivos móveis promoveu a proliferação de aplicações dos mais diversos âmbitos para estes dispositivos não sendo a área clínica uma excepção. Tanto a nível profissional, como a nível de ensino, as tecnologias móveis foram já há muito adoptadas nesta área para as mais diversas finalidades. O trabalho aqui apresentado pretende essencialmente provar a real importância desempenhada pelo mobile learning no contexto da aprendizagem clínica. Mais do que implementar um simples recurso educativo, pretendeu-se conceber um sistema integrado que respondesse a todas as necessidades do aluno quer durante o estudo nas suas diversas fases e locais, como também no próprio serviço hospitalar onde se encontre a desempenhar funções como interno da especialidade. Após uma exaustiva análise das aplicações móveis relevantes da área médica, verificou-se a inexistência de uma ferramenta integradora de vários módulos de aprendizagem com um custo comportável para a maioria dos alunos. Desta forma, idealizou-se uma aplicação capaz de superar esta lacuna que será detalhada ao longo desta tese. Para o desenvolvimento deste trabalho contou-se com a preciosa colaboração dos possíveis utilizadores finais desta ferramenta uma vez que a escolha dos módulos a integrar foi essencialmente baseada nas suas opiniões. Ainda no âmbito desta tese, encontra-se a avaliação do protótipo por parte dos alunos. Esta avaliação pretende validar a efectiva importância de uma ferramenta desta natureza para um aluno de medicina assim como o impacto que o protótipo teve na sua opinião acerca do conceito de mobile learning na aprendizagem clínica. Com vista a uma futura implementação de um recurso educativo deste âmbito, foram também recolhidos os pontos negativos e positivos mais relevantes para o aluno. Em suma, este trabalho valida a importância do papel que as aplicações de aprendizagem para dispositivos móveis podem desempenhar para um aluno de medicina tanto nos seus locais de estudo, como no serviço onde se possa encontrar.