Dispachability improvement of wind generation by the virtual power producers

Nowadays, there is a growing environmental concern about were the energy that we use comes from, bringing the att ention on renewable energies. However, the use and trade of renewable e nergies in the market seem to be complicated because of the lack of guara ntees of generation, mainly in the wind farms. The lack of guarantees is usually addressed by using a reserve generation. The aggregation of DG p lants gives place to a new concept: the Virtual Power Producer (VPP). VPPs can reinforce the importance of wind generation technologies, making them valuable in electricity markets. This paper presents some resul ts obtained with a simulation tool (ViProd) developed to support VPPs in the analysis of their operation and management methods and of their strat egies effects.

Strength improvement of adhesively-bonded joints using a reverse-bent geometry

Adhesive bonding of components has become more efficient in recent years due to the developments in adhesive technology, which has resulted in higher peel and shear strengths, and also in allowable ductility up to failure. As a result, fastening and riveting methods are being progressively replaced by adhesive bonding, allowing a big step towards stronger and lighter unions. However, single-lap bonded joints still generate substantial peel and shear stress concentrations at the overlap edges that can be harmful to the structure, especially when using brittle adhesives that do not allow plasticization in these regions. In this work, a numerical and experimental study is performed to evaluate the feasibility of bending the adherends at the ends of the overlap for the strength improvement of single-lap aluminium joints bonded with a brittle and a ductile adhesive. Different combinations of joint eccentricity were tested, including absence of eccentricity, allowing the optimization of the joint. A Finite Element stress and failure analysis in ABAQUS® was also carried out to provide a better understanding of the bent configuration. Results showed a major advantage of using the proposed modification for the brittle adhesive, but the joints with the ductile adhesive were not much affected by the bending technique.

A case study on the improvement of eco-efficiency ratios: application to a composite processing industry

The World Business Council for Sustainable Development (WBCSD) defines Eco-Efficiency as follows: ‘Eco- Efficiency is achieved by the delivery of competitively priced-goods and services that satisfy human needs and bring quality of life, while progressively reducing ecological impacts and resource intensity throughout the life-cycle to a level at least in line with the earth’s estimated carrying capacity’. Eco-Efficiency is under this point of view a key concept for sustainable development, bringing together economic and ecological progress. Measuring the Eco-Efficiency of a company, factory or business, is a complex process that involves the measurement and control of several and relevant parameters or indicators, globally applied to all companies in general, or specific according to the nature and specificities of the business itself. In this study, an attempt was made in order to measure and evaluate the eco-efficiency of a pultruded composite processing company. For this purpose the recommendations of WBCSD [1] and the directives of ISO 14301 standard [2] were followed and applied. The analysis was restricted to the main business branch of the company: the production and sale of standard GFRP pultrusion profiles. The main general indicators of eco-efficiency, as well as the specific indicators, were defined and determined according to ISO 14031 recommendations. With basis on indicators’ figures, the value profile, the environmental profile, and the pertinent eco-efficiency’s ratios were established and analyzed. In order to evaluate potential improvements on company eco-performance, new indicators values and ecoefficiency ratios were estimated taking into account the implementation of new proceedings and procedures, both in upstream and downstream of the production process, namely: a) Adoption of new heating system for pultrusion die in the manufacturing process, more effective and with minor heat losses; b) Implementation of new software for stock management (raw materials and final products) that minimize production failures and delivery delays to final consumer; c) Recycling approach, with partial waste reuse of scrap material derived from manufacturing, cutting and assembly processes of GFRP profiles. In particular, the last approach seems to significantly improve the eco-efficient performance of the company. Currently, by-products and wastes generated in the manufacturing process of GFRP profiles are landfilled, with supplementary added costs to this company traduced by transport of scrap, landfill taxes and required test analysis to waste materials. However, mechanical recycling of GFRP waste materials, with reduction to powdered and fibrous particulates, constitutes a recycling process that can be easily attained on heavy-duty cutting mills. The posterior reuse of obtained recyclates, either into a close-looping process, as filler replacement of resin matrix of GFRP profiles, or as reinforcement of other composite materials produced by the company, will drive to both costs reduction in raw materials and landfill process, and minimization of waste landfill. These features lead to significant improvements on the sequent assessed eco-efficiency ratios of the present case study, yielding to a more sustainable product and manufacturing process of pultruded GFRP profiles.

Sustainability Improvement of a composite materials’ industry through recycling and re-engineering process approaches

Recent Advances in Mechanics and Materials in Design

Optimization and improvement of NSCU 1.0. Universal Functional Tester produced by Evoleo Technologi

The aim of the project was to improve an existing testing machine that is produced by the company EVOLEO Technologies. New conceptions of each part have been invented in order to produce an innovative unit that combines optimal segments from the old construction with the new, improved ones. The machine is meant to be testing different kind of devices that use specific elements like: buttons, knobs, monitors. The main purpose is to create various concepts of components that could be changed in order to lower the cost, weight or to simplify the operating process. Figure 1. shows the already existing discussed device.

Improvement of the yeast slide culture technique

Este trabalho tem como objetivo melhorar a técnica de cultura em lâmina para ser usada na avaliação da viabilidade de leveduras sob diferentes condições fisiológicas. Inicialmente, foram otimizadas as condições ideais para o cultivo em lâmina de uma estirpe laboratorial (BY4741) e de uma estirpe industrial (NCYC 1214) da levedura Saccharomyces cerevisiae. O melhor protocolo foi obtido utilizando: YEPD agar com uma espessura de cerca de 2 mm; 20 μL de uma suspensão de 1 x 105 células/mL para a estirpe BY4741 ou de 5 x 104 células/mL para a estirpe NCYC 1214; uma câmara de humedecimento com 100 μL de água desionizada e um tempo de incubação de 24 h, a 25 ° C. Com o objetivo de facilitar a contagem das microcolónias, foi adicionado um corante (calcofluor white, CFW) ao meio YEPD agar. Ensaios preliminares, em YEPD líquido, contendo diferentes concentrações de CFW, permitiram verificar que o corante, até 5,0 μg/L, não inibe o crescimento da levedura. Uma concentração de 2,5 μg/L de CFW permitiu a coloração da parede das leveduras, não se observando células com morfologia alterada, sendo esta a concentração de CFW selecionado nos estudos subsequentes. A técnica de cultura em lâmina, com ou sem CFW, foi aplicada para avaliar a viabilidade de células saudáveis (células em fase exponencial de crescimento), células submetidas a stress de etanol [células expostas a 20% (v/v) de etanol, a 25 ºC, durante 2 h] e células envelhecidas (células incubadas em água, a 25 ° C, durante 48 h), da estirpe laboratorial. A percentagem de células viáveis não foi significativamente diferente entre as duas técnicas (com ou sem CFW), após uma incubação de 24 horas. Finalmente, a técnica de cultura de lâmina, contendo CFW, foi comparada com duas técnicas habitualmente usadas na indústria cervejeira: fermentação de curta duração e determinação da percentagem de células gemuladas. Os resultados obtidos através da técnica de cultura de lâmina, desenvolvida, seguem um padrão similar aos obtidos nos ensaios de fermentação de curta duração e aos da determinação da percentagem de células gemuladas. Os resultados obtidos sugerem que a técnica de cultura em lâmina, combinada com CFW, parece ser uma alternativa, fácil, rápida (em 24 h) e reprodutível, relativamente ao método convencional (técnica de plaqueamento), para a avaliação da viabilidade de células de levedura. Deverá ser realizado trabalho adicional a fim de validar o método com estirpes industriais.

Learning Sustainability with EPS@ISEP – Development of a Water Disinfection System

Proceedings of the 8th International Symposium on Project Approaches in Engineering Education (PAEE), Guimarães, 2016