Damage evaluation of drilled carbon/epoxy laminates based on area assessment methods

The characteristics of carbon fibre reinforced laminates had widened their use, from aerospace to domestic appliances. A common characteristic is the need of drilling for assembly purposes. It is known that a drilling process that reduces the drill thrust force can decrease the risk of delamination. In this work, delamination assessment methods based on radiographic data are compared and correlated with mechanical test results (bearing test).

Geostatistical Prediction of Ocean Outfall Plume Characteristics Based on an Autonomous Underwater Vehicle

Geostatistics has been successfully used to analyze and characterize the spatial variability of environmental properties. Besides giving estimated values at unsampled locations, it provides a measure of the accuracy of the estimate, which is a significant advantage over traditional methods used to assess pollution. In this work universal block kriging is novelty used to model and map the spatial distribution of salinity measurements gathered by an Autonomous Underwater Vehicle in a sea outfall monitoring campaign, with the aim of distinguishing the effluent plume from the receiving waters, characterizing its spatial variability in the vicinity of the discharge and estimating dilution. The results demonstrate that geostatistical methodology can provide good estimates of the dispersion of effluents that are very valuable in assessing the environmental impact and managing sea outfalls. Moreover, since accurate measurements of the plume’s dilution are rare, these studies might be very helpful in the future to validate dispersion models.

Defining risk acceptance criteria in occupational settings: A case study in the furniture industrial sector

The use of appropriate acceptance criteria in the risk assessment process for occupational accidents is an important issue but often overlooked in the literature, particularly when new risk assessment methods are proposed and discussed. In most cases, there is no information on how or by whom they were defined, or even how companies can adapt them to their own circumstances. Bearing this in mind, this study analysed the problem of the definition of risk acceptance criteria for occupational settings, defining the quantitative acceptance criteria for the specific case study of the Portuguese furniture industrial sector. The key steps to be considered in formulating acceptance criteria were analysed in the literature review. By applying the identified steps, the acceptance criteria for the furniture industrial sector were then defined. The Cumulative Distribution Function (CDF) for the injury statistics of the industrial sector was identified as the maximum tolerable risk level. The acceptable threshold was defined by adjusting the CDF to the Occupational, Safety & Health (OSH) practitioners’ risk acceptance judgement. Adjustments of acceptance criteria to the companies’ safety cultures were exemplified by adjusting the Burr distribution parameters. An example of a risk matrix was also used to demonstrate the integration of the defined acceptance criteria into a risk metric. This work has provided substantial contributions to the issue of acceptance criteria for occupational accidents, which may be useful in overcoming the practical difficulties faced by authorities, companies and experts.

Centro de Recursos para a Inclusão na Multideficiência: as equipas

A inclusão como paradigma educativo é cada vez mais aceite nos dias de hoje. Diversas publicações neste âmbito, tais como O Forúm Mundial de Educação para Todos (1990), a Declaração de Salamanca (1994) e o Enquadramento da Ação de Dakar (2000), bem como a ênfase dada à igualdade de oportunidades vêm sustentar uma política de educação para todos. As restrições à participação dos alunos com multideficiência legitimam um continuum de serviços que responda às suas particularidades. O projeto Centro de Recursos para a Inclusão (CRI) surge no âmbito da reorientação das escolas especiais, na passagem destes alunos para as escolas de ensino regular. A presente investigação descreve as práticas e perceções dos técnicos do CRI quanto à atuação da equipa e demais intervenientes no processo educativo dos alunos com multideficiência. Para o efeito, foram entrevistados todos os técnicos (32) de equipas CRI do distrito do Porto que atuam com aquela população em contexto escolar. Os resultados evidenciaram que os técnicos percecionam a sua equipa como tendo todas as valências terapêuticas necessárias, concordam com a inclusão de alunos com multideficiência na escola de ensino regular e salientam a necessidade de serem modificadas atitudes relativas à pragmatização desta abordagem. As práticas de avaliação dos alunos resultam de contributos individualizados dos intervenientes, conquanto a intervenção seja realizada nos contextos reais dos indivíduos. Por fim, os profissionais consideram fundamental participarem na elaboração da documentação relativa ao aluno e, consequentemente, sugerem um efetivo reconhecimento e envolvimento da equipa no trabalho desenvolvido nas escolas.

O acordo de Basileia II

Este trabalho evidencia a gestão do risco operacional e a importância da implementação de uma estrutura adequada de gestão de risco. De forma a contextualizar o tema foi abordado o conceito de risco e risco operacional e as várias categorias de risco e feito o enquadramento nos vários Acordos de Basileia. Enfocou-se em Basileia II que inovou tratando do risco operacional, até então esquecido. Neste ambito foram abordados os vários métodos de avaliação de risco: basico, standard e avançado. A temática está organizada de forma a que haja um fio condutor que culmina na gestão do risco apresentando as linhas orientadoras do BIS a esse respeito e um modelo de uma estrutura de gestão de risco. Por fim o exemplo do Banco Comercial Português que implementou a sua estrutura de gestão de risco tendo em conta as diretrizes de Basileia considerando métodos benchmark de gestão de risco.

Manual de boas práticas ambientais para a indústria do mobiliário de madeira

Este trabalho tem como finalidade a elaboração de um projeto na área ambiental denominado Manual de Boas Práticas Ambientais para a Indústria do Mobiliário de Madeira. Para conseguir atingir o objetivo proposto, inicialmente foi efetuado um breve enquadramento ao subsetor do mobiliário de madeira a nível nacional, recorrendo à bibliografia disponível apoiada em dados estatísticos de suporte. Foram caracterizados os dois concelhos alvo de estudo, Paços de Ferreira e Paredes por apresentarem a maior concentração industrial no subsetor a nível nacional. Procedeu-se à descrição do processo produtivo da indústria do mobiliário de madeira com a identificação dos seus principais aspetos ambientais. Posteriormente foi aplicado um questionário para verificar como as empresas do subsetor nos concelhos alvo de estudo tratam as questões ambientais da sua atividade industrial. De forma complementar, realizou-se um caso de estudo na empresa IKEA Industry Portugal, Lda, onde foi elaborado um diagnóstico ambiental detalhado com incidência nas boas práticas ambientais. Finalmente foi elaborado o Manual de Boas Práticas Ambientais para a Indústria do Mobiliário de Madeira.

Assessment of the environmental radiation by in situ gamma ray spectrometry

Naturally occurring radioactive materials (NORM) under certain conditions can reach hazardous radiological levels contributing to an additional exposure dose to ionizing radiation. Most environmental concerns are associated with uranium mining and milling sites, but the same concerns should be addressed to natural near surface occurrences of uranium as well as man-made sources such as technologically enhanced naturally occurring radioactive materials (TENORM) resulting from phosphates industry, ceramic industry and energy production activities, in particular from coal-fired power plants which is one of the major sources of increased exposure to man from enhanced naturally occurring materials. This work describes the methodology developed to assess the environmental radiation by in situ gamma spectrometry in the vicinity of a Portuguese coal fired power plant. The current investigation is part of a research project that is undergoing in the vicinity of Sines Coal-Fired Power Plant (south of Portugal) until the end of 2013.

Assessment of non-steroidal anti-inflammatory and analgesic pharmaceuticals in seawaters of North of Portugal: Occurrence and environmental risk

The occurrence of seven pharmaceuticals and two metabolites belonging to non-steroidal anti-inflammatory drugs and analgesics therapeutic classes was studied in seawaters. A total of 101 samples covering fourteen beaches and five cities were evaluated in order to assess the spatial distribution of pharmaceuticals among north Portuguese coast. Seawaters were selected in order to embrace different bathing water quality (excellent, good and sufficient). Acetaminophen, ketoprofen and the metabolite hydroxyibuprofen were detected in all the seawater samples at maximum concentrations of 584, 89.7 and 287 ng L− 1, respectively. Carboxyibuprofen had the highest seawater concentration (1227 ng L− 1). The temporal distribution of the selected pharmaceuticals during the bathing season showed that, in general, higher concentrations were detected in August and September. The environmental risk posed by the pharmaceuticals detected in seawaters towards different trophic levels (fish, daphnids and algae) was also assessed. Only diclofenac showed hazard quotients above one for fish, representing a potential risk for aquatic organisms. These results were observed in seawaters classified as excellent bathing water. Additional data is needed in order to support the identification and prioritization of risks posed by pharmaceuticals in marine environment.