Creative industries in Macau innovation and tradition at USJ

International Conference Of Silk, Sugar and Spices: new directions in East-West CooperationISCAP 11-12-13 November 2015

Nutritional value and influence of the thermal processing on a traditional Portuguese fermented sausage (alheira)

Alheiras are a traditional, smoked, fermented meat sausage, produced in Portugal, with an undeniable cultural and gastronomic legacy. In this study, we assessed the nutritional value of this product, as well as the influence of different types of thermal processing. Alheiras from Mirandela were submitted to six different procedures: microwave, skillet, oven, charcoal grill, electric fryer and electric grill. Protein, fat, carbohydrate, minerals, NaCl, and cholesterol contents, as well as fatty acid profile were evaluated. The results show that alheiras are not hypercaloric but an unbalanced foodstuff (high levels of proteins and lipids) and the type of processing has a major impact on their nutritional value. Charcoal grill is the healthiest option: less fat (12.5 g/100 g) and cholesterol (29.3 mg/100 g), corresponding to a lower caloric intake (231.8 kcal, less 13% than the raw ones). Inversely, fried alheiras presented the worst nutritional profile, with the highest levels of fat (18.1 g/100 g) and cholesterol (76.0 g/100 g).

Numerical and experimental analyses of biocomposites reinforced with natural fibres

n the last decades the biocomposites have been widely used in the construction, automobile and aerospace industries. Not only the interface transition zone (ITZ) but also the heterogeneity of natural fibres affects the mechanical behaviour of these composites. This work focuses on the numerical and experimental analyses of a polymeric composite fabricated with epoxy resin and unidirectional sisal and banana fibres. A three-dimensional model was set to analyze the composites using the elastic properties of the individual phases. In addition, a two-dimensional model was set taking into account the effective composite properties obtained by micromechanical models. A tensile testing was performed to validate the numerical analyses and evaluating the interface condition of the constitutive phases.

A survey of technologies and applications for climbing robots locomotion and adhesion

The interest in the development of climbing robots has grown rapidly in the last years. Climbing robots are useful devices that can be adopted in a variety of applications, such as maintenance and inspection in the process and construction industries. These systems are mainly adopted in places where direct access by a human operator is very expensive, because of the need for scaffolding, or very dangerous, due to the presence of an hostile environment. The main motivations are to increase the operation efficiency, by eliminating the costly assembly of scaffolding, or to protect human health and safety in hazardous tasks. Several climbing robots have already been developed, and other are under development, for applications ranging from cleaning to inspection of difficult to reach constructions. A wall climbing robot should not only be light, but also have large payload, so that it may reduce excessive adhesion forces and carry instrumentations during navigation. These machines should be capable of travelling over different types of surfaces, with different inclinations, such as floors, walls, or ceilings, and to walk between such surfaces (Elliot et al. (2006); Sattar et al. (2002)). Furthermore, they should be able of adapting and reconfiguring for various environment conditions and to be self-contained. Up to now, considerable research was devoted to these machines and various types of experimental models were already proposed (according to Chen et al. (2006), over 200 prototypes aimed at such applications had been developed in the world by the year 2006). However, we have to notice that the application of climbing robots is still limited. Apart from a couple successful industrialized products, most are only prototypes and few of them can be found in common use due to unsatisfactory performance in on-site tests (regarding aspects such as their speed, cost and reliability). Chen et al. (2006) present the main design problems affecting the system performance of climbing robots and also suggest solutions to these problems. The major two issues in the design of wall climbing robots are their locomotion and adhesion methods. With respect to the locomotion type, four types are often considered: the crawler, the wheeled, the legged and the propulsion robots. Although the crawler type is able to move relatively faster, it is not adequate to be applied in rough environments. On the other hand, the legged type easily copes with obstacles found in the environment, whereas generally its speed is lower and requires complex control systems. Regarding the adhesion to the surface, the robots should be able to produce a secure gripping force using a light-weight mechanism. The adhesion method is generally classified into four groups: suction force, magnetic, gripping to the surface and thrust force type. Nevertheless, recently new methods for assuring the adhesion, based in biological findings, were proposed. The vacuum type principle is light and easy to control though it presents the problem of supplying compressed air. An alternative, with costs in terms of weight, is the adoption of a vacuum pump. The magnetic type principle implies heavy actuators and is used only for ferromagnetic surfaces. The thrust force type robots make use of the forces developed by thrusters to adhere to the surfaces, but are used in very restricted and specific applications. Bearing these facts in mind, this chapter presents a survey of different applications and technologies adopted for the implementation of climbing robots locomotion and adhesion to surfaces, focusing on the new technologies that are recently being developed to fulfill these objectives. The chapter is organized as follows. Section two presents several applications of climbing robots. Sections three and four present the main locomotion principles, and the main "conventional" technologies for adhering to surfaces, respectively. Section five describes recent biological inspired technologies for robot adhesion to surfaces. Section six introduces several new architectures for climbing robots. Finally, section seven outlines the main conclusions.

Wuthering heights on the screen: exploring the relations between film adaptation and subtitling

This essay aims to confront the literary text Wuthering Heights by Emily Brontë with five of its screen adaptations and Portuguese subtitles. Owing to the scope of the study, it will necessarily afford merely a bird‘s eye view of the issues and serve as a starting point for further research. Accordingly, the following questions are used as guidelines: What transformations occur in the process of adapting the original text to the screen? Do subtitles update the film dialogues to the target audience‘s cultural and linguistic context? Are subtitles influenced more by oral speech than by written literary discourse? Shouldn‘t subtitles in fact reflect the poetic function prevalent in screen adaptations of literary texts? Rather than attempt to answer these questions, we focus on the objects as phenomena. Our interdisciplinary undertaking clearly involves a semio-pragmatic stance, at this stage trying to avoid theoretical backdrops that may affect our apprehension of the objects as to their qualities, singularities, and conventional traits, based on Lucia Santaella‘s interpretation of Charles S. Peirce‘s phaneroscopy. From an empirical standpoint, we gather features and describe peculiarities, under the presumption that there are substrata in subtitling that point or should point to the literary source text, albeit through the mediation of a film script and a particular cinematic style. Therefore, we consider how the subtitling process may be influenced by the literary intertext, the idiosyncrasies of a particular film adaptation, as well as the socio-cultural context of the subtitler and target audience. First, we isolate one of the novel‘s most poignant scenes – ‗I am Heathcliff‘ – taking into account its symbolic play and significance in relation to character and plot construction. Secondly, we study American, English, French, and Mexican adaptations of the excerpt into film in terms of intersemiotic transformations. Then we analyze differences between the film dialogues and their Portuguese subtitles.

CDIO and the European Project Semester: a match for capstone projects?

The CDIO Initiative is an open innovative educational framework for engineering graduation degrees set in the context of Conceiving – Designing – Implementing – Operating real-world systems and products, which is embraced by a network of worldwide universities, the CDIO collaborators. A CDIO compliant engineering degree programme typically includes a capstone module on the final semester. Its purpose is to expose students to problems of a greater dimension and complexity than those faced throughout the degree programme as well as to put them in contact with the so-called real world, in opposition to the academic world. However, even in the CDIO context, there are barriers that separate engineering capstone students from the real world context of an engineering professional: (i) limited interaction with experts from diverse scientific areas; (ii) reduced cultural and scientific diversity within the teams; and (iii) lack of a project supportive framework to foster the complementary technical and non-technical skills required in an engineering professional. To address these shortcomings, we propose the adoption of the European Project Semester (EPS) framework, a one semester student centred international capstone programme offered by a group of European engineering schools (the EPS Providers) as part of their student exchange programme portfolio. The EPS package is organised around a central module – the EPS project – and a set of complementary supportive modules. Project proposals refer to open multidisciplinary real world problems and supervision becomes coaching. The students are organised in teams, grouping individuals from diverse academic backgrounds and nationalities, and each team is fully responsible for conducting its project. EPS complies with the CDIO directives on Design-Implement experiences and provides an integrated framework for undertaking capstone projects, which is focussed on multicultural and multidisciplinary teamwork, problem-solving, communication, creativity, leadership, entrepreneurship, ethical reasoning and global contextual analysis. As a result, we recommend the adoption of the EPS within CDIO capstone modules for the benefit of engineering students.

Study of behavioural and neural bases of visuo-spatial working memory with an fMRI paradigm based on an n-back task

The goal of this study was to propose a new functional magnetic resonance imaging (fMRI) paradigm using a language-free adaptation of a 2-back working memory task to avoid cultural and educational bias. We additionally provide an index of the validity of the proposed paradigm and test whether the experimental task discriminates the behavioural performances of healthy participants from those of individuals with working memory deficits. Ten healthy participants and nine patients presenting working memory (WM) deficits due to acquired brain injury (ABI) performed the developed task. To inspect whether the paradigm activates brain areas typically involved in visual working memory (VWM), brain activation of the healthy participants was assessed with fMRIs. To examine the task's capacity to discriminate behavioural data, performances of the healthy participants in the task were compared with those of ABI patients. Data were analysed with GLM-based random effects procedures and t-tests. We found an increase of the BOLD signal in the specialized areas of VWM. Concerning behavioural performances, healthy participants showed the predicted pattern of more hits, less omissions and a tendency for fewer false alarms, more self-corrected responses, and faster reaction times, when compared with subjects presenting WM impairments. The results suggest that this task activates brain areas involved in VWM and discriminates behavioural performances of clinical and non-clinical groups. It can thus be used as a research methodology for behavioural and neuroimaging studies of VWM in block-design paradigms.

Produção de sideróforo pela bactéria Bacillus megaterium

Os agentes quelantes, como é o caso do EDTA, são utilizados numa ampla variedade de indústrias como a indústria têxtil, da pasta de papel, alimentar, de cosméticos ou de detergentes. Contudo, os agentes complexantes sintéticos, habitualmente usados, não são biodegradáveis, pelo que a sua acumulação no meio ambiente constitui motivo de preocupação. Deste modo, existe um interesse crescente na substituição destes compostos por compostos similares biodegradáveis sendo, deste modo, ambientalmente amigáveis. Alguns microrganismos são capazes de produzir moléculas com capacidade de captar metais. Um desses exemplos são os sideróforos: compostos produzidos por bactérias, fungos e plantas gramíneas, com capacidade de formar quelatos muito estáveis com o ferro. A presente dissertação teve como objetivo estudar o efeito de diferentes condições culturais e nutricionais na produção de sideróforo pela bactéria Bacillus megaterium. A avaliação da produção de sideróforo, utilizando o método colorimétrico Chrome Azurol S (CAS), durante o crescimento da bactéria, em meio de cultura deficiente em ferro, na presença de 5 ou de 20 g/L de glucose, mostrou que o início da sua produção ocorre, durante a fase exponencial de crescimento, não está relacionada com a esporulação e não é afetada pela concentração de glucose. Contudo, o crescimento da bactéria na presença de diferentes fontes de carbono (glicerol, frutose, galactose, glucose, manose, lactose, maltose ou sacarose) evidenciou que a produção de sideróforo é afetada pelo tipo de fonte de carbono. O crescimento na presença de glicerol promoveu a maior produção de sideróforo; efeito inverso foi observado na presença de manose. A bactéria B. megaterium, quando crescida na presença de frutose, galactose, glucose, lactose, maltose ou sacarose, produziu concentrações similares de sideróforo. O aumento da concentração de arginina, no meio de cultura, não aumentou a produção de sideróforo. A agitação apresentou um efeito positivo na produção de sideróforo; o crescimento em condições estáticas atrasou e diminuiu a produção de sideróforo. Em conclusão, o glicerol parece constituir uma fonte de carbono alternativa, aos monossacáridos e dissacáridos, para a produção de sideróforo. A agitação apresenta um efeito positivo na produção de sideróforo pela bactéria B. megaterium ATCC 19213.