A influência dos horários de trabalho (horário normal e horário por turnos) na qualidade de vida no trabalho e engagement profissional

Dissertação apresentada ao Instituto Politécnico do Porto para obtenção do Grau de Mestre em Gestão das Organizações, Ramo de Gestão de Empresas Orientada por Prof. Doutora Maria Alexandra Pacheco Ribeiro da Costa Esta dissertação inclui as críticas e sugestões feitas pelo júri.

Replication in distributed systems using IEC 61499 standard

The international Electrotechnical Commission (IEC) 61499 architecture incorporated several function block with which distributed control application may be developed, and how these are interpreted and executed. However, due the distributed nature of the control applications, many issues also need to be taken into account. Most of these are due to the new error model and failure modes of the distributed hardware on which the distributed application is executed and also due the incomplete standards definition of the execution models. IEC 61499 frameworks does not clarify how to handle with replication of software and hardware components. In this paper we propose a replication model for IEC 61499 applications and which mechanisms and protocols may be used for their support.

Strength prediction of single- and double-lap joints by standard and extended finite element modelling

The structural integrity of multi-component structures is usually determined by the strength and durability of their unions. Adhesive bonding is often chosen over welding, riveting and bolting, due to the reduction of stress concentrations, reduced weight penalty and easy manufacturing, amongst other issues. In the past decades, the Finite Element Method (FEM) has been used for the simulation and strength prediction of bonded structures, by strength of materials or fracture mechanics-based criteria. Cohesive-zone models (CZMs) have already proved to be an effective tool in modelling damage growth, surpassing a few limitations of the aforementioned techniques. Despite this fact, they still suffer from the restriction of damage growth only at predefined growth paths. The eXtended Finite Element Method (XFEM) is a recent improvement of the FEM, developed to allow the growth of discontinuities within bulk solids along an arbitrary path, by enriching degrees of freedom with special displacement functions, thus overcoming the main restriction of CZMs. These two techniques were tested to simulate adhesively bonded single- and double-lap joints. The comparative evaluation of the two methods showed their capabilities and/or limitations for this specific purpose.

An Exercise Program Improves Health-Related Quality of Life of Workers

Low back problems are associated with decreased quality of life. Specific exercises can improve quality of life, resulting in better professional performance and functionality. The purpose of this study was to evaluate the effect of following a 21-month exercise program on the quality of life of warehouse workers. The population included 557 male warehouse workers from a food distribution company in Oporto, Portugal. Upon application of the selection criteria, 249 workers were deemed eligible, which were randomized into two groups (125 in the intervention group and 124 in the control group). Then, subjects were asked to volunteer for the study, the sample being formed by 229 workers (112 in the intervention group and 117 in the control group). All subjects completed the SF-36 questionnaire prior to beginning the program and on the 11th and 21st months following it. The exercises were executed in the company facilities once a day for 8 min. Data were analyzed using SPSS® 17.0 for Windows®. After 11 months of following the exercise program, there was an increase in all scores for the experimental group, with statistically significant differences in the dimensions physical functioning (0.019), bodily pain (0.010), general health (0.004), and rolephysical (0.037). The results obtained at the end of the study (21 months) showed significant improvements in the dimensions physical functioning (p = 0.002), rolephysical (p = 0.007), bodily pain (p = 0.001), social functioning (p = 0.015), role-emotional (p = 0.011), and mental health (p = 0.001). In the control group all dimensions showed a decrease in mean scores. It can be concluded that the implementation of a low back specific exercise program has changed positively the quality of life of warehouse workers.

Safety climate and its relationship with furniture companies’ safety performance and workers’ risk acceptance

This study aims to analyse the relationship between safety climate and the level of risk acceptance, as well as its relationship with workplace safety performance. The sample includes 14 companies and 403 workers. The safety climate assessment was performed by the application of a Safety Climate in Wood Industries questionnaire and safety performance was assessed with a checklist. Judgements about risk acceptance were measured through questionnaires together with four other variables: trust, risk perception, benefit perception and emotion. Safety climate was found to be correlated with workgroup safety performance, and it also plays an important role in workers’ risk acceptance levels. Risk acceptance tends to be lower when safety climate scores of workgroups are high, and subsequently, their safety performance is better. These findings seem to be relevant, as they provide Occupational, Safety and Health practitioners with a better understanding of workers’ risk acceptance levels and of the differences among workgroups.

Caracterização da Exposição ao Ruído dos Trabalhadores da Indústria Portuguesa

Dissertação de Mestrado em Gestão Integrada da Qualidade, Ambiente e Segurança

The effect of method, standard and sample components on the total antioxidant capacity of commercial waters assessed by optical conventional assays

The total antioxidant capacity (TAC) of 28 flavoured water samples was assessed by ferric reducing antioxidant potential (FRAP), oxygen radical absorbance capacity (ORAC), trolox equivalent antioxidant capacity (TEAC) and total reactive antioxidant potential (TRAP) methods. It was observed that flavoured waters had higher antioxidant activity than the corresponding natural ones. The observed differences were attributed to flavours, juice and vitamins. Generally, higher TAC contents were obtained on lemon waters and lower values on guava and raspberry flavoured waters. Lower and higher TACs were obtained by TRAP and ORAC method, respectively. Statistical analysis suggested that vitamins and flavours increased the antioxidant content of the commercial waters.

Standard commercial education robotic platform: intermediate solution to teaching robotics

Teaching robotics to students at the beginning of their studies has become a huge challenge. Simulation environments can be an effective solution to that challenge where students can interact with simulated robots and have the first contact with robotic constraints. From our previous experience with simulation environments it was possible to observe that students with lower background knowledge in robotics where able to deal with a limited number of constraints, implement a simulated robotic platform and study several sensors. The question is: after this first phase what should be the best approach? Should the student start developing their own hardware? Hardware development is a very important part of an engineer's education but it can also be a difficult phase that could lead to discouragement and loss of motivation in some students. Considering the previous constraints and first year engineering students’ high abandonment rate it is important to develop teaching strategies to deal with this problem in a feasible way. The solution that we propose is the integration of a low-cost standard robotic platform WowWee Rovio as an intermediate solution between the simulation phase and the stage where the students can develop their own robots. This approach will allow the students to keep working in robotic areas such as: cooperative behaviour, perception, navigation and data fusion. The propose approach proved to be a motivation step not only for the students but also for the teachers. Students and teachers were able to reach an agreement between the level of demand imposed by the teachers and satisfaction/motivation of the students.

Tensile fracture characterization of adhesive joints by standard and optical techniques

The use of adhesive joints has increased in recent decades due to its competitive features compared with traditional methods. This work aims to estimate the tensile critical strain energy release rate (GIC) of adhesive joints by the Double-Cantilever Beam (DCB) test. The J-integral is used since it enables obtaining the tensile Cohesive Zone Model (CZM) law. An optical measuring method was developed for assessing the crack tip opening (δn) and adherends rotation (θo). The proposed CZM laws were best approximated by a triangular shape for the brittle adhesive and a trapezoidal shape for the two ductile adhesives.

Revisão dos tempos-padrão no setor de construção de pneus

Este relatório de estágio foi desenvolvido no âmbito do estágio de final de curso, em ambiente industrial, do Mestrado em Engenharia e Gestão Industrial da ESEIG. O estágio foi realizado na Continental Mabor S.A., situada em Vila Nova de Famalicão, mais especificamente no Departamento de Engenharia Industrial. A indústria dos pneus está inserida num mercado cada vez mais competitivo e exigente, em que os custos e os prazos de entrega devem ser cada vez menores e a qualidade do produto cada vez maior. Por esses motivos, é necessária uma constante melhoria dos processos produtivos. Para que este esforço de melhoria contínua seja bem-sucedido é necessário recorrer por vezes a prémios de produção, para incentivar uma maior produtividade. Contudo cada pneu tem tempos de produção diferentes de máquina para máquina e é preciso corrigir esses tempos em prol de uma justa atribuição de prémios. O presente trabalho teve como principal objetivo atualizar as perturbações e atualizar os tempos-máquina no setor de construção de pneus. Inicialmente foi recolhido o tempo de aplicação do capply (material que pertence ao pneu) para futuramente verificar se será possível prever o tempo de aplicação de capply, consoante os metros de aplicação. Como não foi possível estabelecer uma correlação, não será exposta a análise até se chegar a essa conclusão. Depois fez-se o estudo das perturbações, com recurso à cronometragem, na maior das cinco divisões da fábrica - a construção. Por último fez-se a recolha dos tempos-máquina de vários tipos de construção de pneus em todos os módulos de construção de pneus (KM e PU), através do método filmagem. Conseguiu-se singularizar os tempos para cada máquina de forma a tornar, mais justo os prémios de produção atribuídos aos operadores, no curto prazo, e optimizar a produção e o tempo-padrão.