Replication in distributed systems using IEC 61499 standard

The international Electrotechnical Commission (IEC) 61499 architecture incorporated several function block with which distributed control application may be developed, and how these are interpreted and executed. However, due the distributed nature of the control applications, many issues also need to be taken into account. Most of these are due to the new error model and failure modes of the distributed hardware on which the distributed application is executed and also due the incomplete standards definition of the execution models. IEC 61499 frameworks does not clarify how to handle with replication of software and hardware components. In this paper we propose a replication model for IEC 61499 applications and which mechanisms and protocols may be used for their support.

Strength prediction of single- and double-lap joints by standard and extended finite element modelling

The structural integrity of multi-component structures is usually determined by the strength and durability of their unions. Adhesive bonding is often chosen over welding, riveting and bolting, due to the reduction of stress concentrations, reduced weight penalty and easy manufacturing, amongst other issues. In the past decades, the Finite Element Method (FEM) has been used for the simulation and strength prediction of bonded structures, by strength of materials or fracture mechanics-based criteria. Cohesive-zone models (CZMs) have already proved to be an effective tool in modelling damage growth, surpassing a few limitations of the aforementioned techniques. Despite this fact, they still suffer from the restriction of damage growth only at predefined growth paths. The eXtended Finite Element Method (XFEM) is a recent improvement of the FEM, developed to allow the growth of discontinuities within bulk solids along an arbitrary path, by enriching degrees of freedom with special displacement functions, thus overcoming the main restriction of CZMs. These two techniques were tested to simulate adhesively bonded single- and double-lap joints. The comparative evaluation of the two methods showed their capabilities and/or limitations for this specific purpose.

The effect of method, standard and sample components on the total antioxidant capacity of commercial waters assessed by optical conventional assays

The total antioxidant capacity (TAC) of 28 flavoured water samples was assessed by ferric reducing antioxidant potential (FRAP), oxygen radical absorbance capacity (ORAC), trolox equivalent antioxidant capacity (TEAC) and total reactive antioxidant potential (TRAP) methods. It was observed that flavoured waters had higher antioxidant activity than the corresponding natural ones. The observed differences were attributed to flavours, juice and vitamins. Generally, higher TAC contents were obtained on lemon waters and lower values on guava and raspberry flavoured waters. Lower and higher TACs were obtained by TRAP and ORAC method, respectively. Statistical analysis suggested that vitamins and flavours increased the antioxidant content of the commercial waters.

Standard commercial education robotic platform: intermediate solution to teaching robotics

Teaching robotics to students at the beginning of their studies has become a huge challenge. Simulation environments can be an effective solution to that challenge where students can interact with simulated robots and have the first contact with robotic constraints. From our previous experience with simulation environments it was possible to observe that students with lower background knowledge in robotics where able to deal with a limited number of constraints, implement a simulated robotic platform and study several sensors. The question is: after this first phase what should be the best approach? Should the student start developing their own hardware? Hardware development is a very important part of an engineer's education but it can also be a difficult phase that could lead to discouragement and loss of motivation in some students. Considering the previous constraints and first year engineering students’ high abandonment rate it is important to develop teaching strategies to deal with this problem in a feasible way. The solution that we propose is the integration of a low-cost standard robotic platform WowWee Rovio as an intermediate solution between the simulation phase and the stage where the students can develop their own robots. This approach will allow the students to keep working in robotic areas such as: cooperative behaviour, perception, navigation and data fusion. The propose approach proved to be a motivation step not only for the students but also for the teachers. Students and teachers were able to reach an agreement between the level of demand imposed by the teachers and satisfaction/motivation of the students.

Tensile fracture characterization of adhesive joints by standard and optical techniques

The use of adhesive joints has increased in recent decades due to its competitive features compared with traditional methods. This work aims to estimate the tensile critical strain energy release rate (GIC) of adhesive joints by the Double-Cantilever Beam (DCB) test. The J-integral is used since it enables obtaining the tensile Cohesive Zone Model (CZM) law. An optical measuring method was developed for assessing the crack tip opening (δn) and adherends rotation (θo). The proposed CZM laws were best approximated by a triangular shape for the brittle adhesive and a trapezoidal shape for the two ductile adhesives.

Avaliação de Riscos para a Segurança da Informação no ISEP Aplicação ao Processo de Notas

Desde que existe informação, há necessidade de criar um sistema que permita gerir e garantir que a informação está segura e que cumpre os requisitos básicos de segurança. Como tal, é necessário desenvolver técnicas e mecanismos para que os requisitos sejam testados e melhorados continuamente. Com esta necessidade em vista, apareceram padrões que dão resposta a um conjunto vasto de problemas, em diferentes sistemas e aplicações diversas. Estes tornaram-se guias de reflexão para quem os analisava, de arquitetura para quem os implementava e modelos para quem os geria. O padrão ISO 27001 dá resposta aos cuidados a ter para se conseguir um sistema de gestão da segurança da informação eficaz e eficiente. Esta norma preocupa-se com os detalhes de aplicação até à forma como é implementado e arquitetado o sistema. Os processos, atividades, fluxos de trabalho são essenciais para que esta norma seja cumprida. É necessário um bom escrutínio dos processos e suas atividades, assim como um fluxo de trabalho bem definido com papéis e responsabilidades de cada ator. É necessário também assegurar a forma como é gerido, a sua verificação e melhoria contínua. Foi aplicado no ISEP um exercício com o qual se pretendeu verificar se os processos e outros aspetos seguiam estes cuidados e se estavam de acordo com a norma. Durante o exercício foram verificados processos dentro de um certo âmbito, todas as suas atividades, papéis e responsabilidades, verificação de recursos, aplicação de controlos e aplicação de uma análise de risco. Esta análise tem como objetivo verificar o nível de segurança dos recursos, algo que a norma ISO 27001 propõe mas não especifica em que moldes. No final deste exercício pretendeu-se melhorar o sistema de gestão de informação do ISEP em vertentes tais como a documentação, a qual especifica quais os passos realizados no decorrer do mesmo.