Analysis of the domain of applicability of an algorithm for a resources system selection problem for Distributed/Agile/Virtual Enterprises integration

The process of resources systems selection takes an important part in Distributed/Agile/Virtual Enterprises (D/A/V Es) integration. However, the resources systems selection is still a difficult matter to solve in a D/A/VE, as it is pointed out in this paper. Globally, we can say that the selection problem has been equated from different aspects, originating different kinds of models/algorithms to solve it. In order to assist the development of a web prototype tool (broker tool), intelligent and flexible, that integrates all the selection model activities and tools, and with the capacity to adequate to each D/A/V E project or instance (this is the major goal of our final project), we intend in this paper to show: a formulation of a kind of resources selection problem and the limitations of the algorithms proposed to solve it. We formulate a particular case of the problem as an integer programming, which is solved using simplex and branch and bound algorithms, and identify their performance limitations (in terms of processing time) based on simulation results. These limitations depend on the number of processing tasks and on the number of pre-selected resources per processing tasks, defining the domain of applicability of the algorithms for the problem studied. The limitations detected open the necessity of the application of other kind of algorithms (approximate solution algorithms) outside the domain of applicability founded for the algorithms simulated. However, for a broker tool it is very important the knowledge of algorithms limitations, in order to, based on problem features, develop and select the most suitable algorithm that guarantees a good performance.

Adhesive selection for single lap bonded joints: Experimentation and advanced techniques for strength prediction

The integrity of multi-component structures is usually determined by their unions. Adhesive-bonding is often used over traditional methods because of the reduction of stress concentrations, reduced weight penalty, and easy manufacturing. Commercial adhesives range from strong and brittle (e.g., Araldite® AV138) to less strong and ductile (e.g., Araldite® 2015). A new family of polyurethane adhesives combines high strength and ductility (e.g., Sikaforce® 7888). In this work, the performance of the three above-mentioned adhesives was tested in single lap joints with varying values of overlap length (LO). The experimental work carried out is accompanied by a detailed numerical analysis by finite elements, either based on cohesive zone models (CZM) or the extended finite element method (XFEM). This procedure enabled detailing the performance of these predictive techniques applied to bonded joints. Moreover, it was possible to evaluate which family of adhesives is more suited for each joint geometry. CZM revealed to be highly accurate, except for largely ductile adhesives, although this could be circumvented with a different cohesive law. XFEM is not the most suited technique for mixed-mode damage growth, but a rough prediction was achieved.

Supporting leadership development by exposure to role models: two case studies

The idiomatic expression “In Rome be a Roman” can be applied to leadership training and development as well. Leaders who can act as role models inspire other future leaders in their behaviour, attitudes and ways of thinking. Based on two examples of current leaders in the fields of Politics and Public Administration, I support the idea that exposure to role models during their training was decisive for their career paths and current activities as prominent characters in their profession. Issues such as how students should be prepared for community or national leadership as well as cross-cultural engagement are raised here. The hypothesis of transculturalism and cross-cultural commitment as a factor of leadership is presented. Based on current literature on Leadership as well as the presented case studies, I expect to raise a debate focusing on strategies for improving leaders’ training in their cross-cultural awareness.

Long-term price range forecast applied to risk management using regression models

Long-term contractual decisions are the basis of an efficient risk management. However those types of decisions have to be supported with a robust price forecast methodology. This paper reports a different approach for long-term price forecast which tries to give answers to that need. Making use of regression models, the proposed methodology has as main objective to find the maximum and a minimum Market Clearing Price (MCP) for a specific programming period, and with a desired confidence level α. Due to the problem complexity, the meta-heuristic Particle Swarm Optimization (PSO) was used to find the best regression parameters and the results compared with the obtained by using a Genetic Algorithm (GA). To validate these models, results from realistic data are presented and discussed in detail.

Identity – towards a conceptualization

The development of economical relations increases the interaction between organizations and stakeholders. It is no more acceptable to manage an organization under a transactional perspective where suppliers had a fundamental role. Nowadays organizations are being managed under a relational perspective where relations and relationship management in general have consequences in identity management (Hakansson e Snehota, 1989, 1995). A correct perception and management of identity is necessary to achieve distinctiveness in the competitive environment. This way, identity is influenced by relations with stakeholders in general and particularly with competitors. The ICIG concept states that identity is related with the values of the organization and it helps creating distinctiveness in the competitive environment (Van Riel, Balmer, 1997); Baker and Balmer (1997) state that identity is what the organization is; Suvatjis and de Chernatony (2005) refer that expressing identity is a dynamic process that evolves the use of a management model to face context changes; Kapferer (1991) states that brand identity is the project, the self conception of the brand. After reviewing and confronting literature under the plethora of identities’ concepts and perspectives (He, Balmer, 2007) one can’t find an integrative answer with all the elements that contribute to identity of organizations. The authors are strongly interested to contribute to the elimination of this limitation and to answer to strategic management needs. In a marketing context one can find: - the corporate identity approach that is focused in the distinctive attributes of an organization (Abratt, Balmer, Marwick e Fill, Stuart, Balmer and Gray, Alessandri, Suvatjis and de Chernatony) - the brand identity approach (related with the application of corporate identity studies to brands) - Kapferer, Semprini, Aaker, de Chernatony). Kapferer (1991), one of the most prolific authors in this field was the first author to integrate identity in a brand concept. In his view, identity is an emission concept. This idea is shared also by Aaker (1996). Yet, identity has to be managed in a competitive environment which is constantly changing. After reviewing and confronting literature, authors select concepts that are generally accepted by the investigators in order to design a model to analyze and manage identity: - corporate identity models: personality, image/reputation, culture, philosophy, mission, strategy, structure, communication - some of these concepts derive from identity models and others from identity management models; - brand identity models – Kapferer (1991, 2008) identity prism, witch is basis of literature in this field: culture, physical facet, personality, relationship (between brand and consumer), reflected consumer, consumers` self-concept. After discussion authors decide to include other concept in line with other authors` view: country of origin (Aaker, 1996). A discussion eliminates the twin concepts and the final selection is as follows: personality, image/reputation, culture (including philosophy and mission), strategy, structure, communication, culture, physical facet, relationship (between brand and consumer), reflected consumer, consumers` self-concept and according to authors` reflections “relationships” deriving from competitors` actions in competitive environment. Competitors’ actions and decisions have a stronger influence in the organizations` positioning than any other stakeholder as stated before. This is a work in progress towards a new model in identity analysis and management so an exploratory study will follow inquiring experts on identity in order to evaluate these concepts and correct the theoretical perspectives.

Estudo empírico da caracterização da selecção de fornecedores

O problema de selecção de fornecedores/parceiros é uma parte integrante e importante nas empresas que se propõem a um desempenho competitivo e lucrativo na sua área de actividade. A escolha do melhor fornecedor/parceiro passa na maior parte da vezes por fazer uma análise cuidada dos factores que podem influenciar positiva ou negativamente essa escolha. Desde cedo este problema tem vindo a ser alvo de inúmeros estudos, estudos esses que se focam essencialmente nos critérios a considerar e nas metodologias a adoptar para optimizar a escolha dos parceiros. De entre os vários estudos efectuados, muitos são os que consideram como critérios chave o custo do produto, a qualidade, a entrega e a reputação da empresa fornecedora. Ainda assim, há muitos outros que são referidos e que na sua maioria se apresentam como subcritérios. No âmbito deste trabalho, foram identificados cinco grandes critérios, Qualidade, Sistema Financeiro, Sinergias, Custo e Sistema Produtivo. Dentro desses critérios, sentiu-se a necessidade de incluir alguns subcritérios pelo que, cada um dos critérios chave apresenta cinco subcritérios. Identificados os critérios, foi necessário perceber de que forma são aplicados e que modelos são utilizados para se poder tirar o melhor partido das informações. Sabendo que existem modelos que privilegiam a programação matemática e outros que fazem uso de ponderações lineares para se identificar o melhor fornecedor, foi realizado um inquérito e contactadas empresas por forma a perceber quais os factores que mais peso tinham nas suas decisões de escolha de parceiros. Interpretados os resultados e tratados os dados foi adoptado um modelo de ponderação linear para traduzir a importância de cada um dos factores. O modelo proposto apresenta uma estrutura hierárquica e pode ser aplicado com o método AHP de Saaty ou o método de Análise de Valor. Este modelo permite escolher a ou as alternativas que melhor se adequam aos requisitos das empresas.

Ventiladores pulmonares – Seleção, aquisição e confiabilidade metrológica

A saúde em Portugal vive hoje mudanças significativas. A criação de modelos de Gestão Empresarial em instituições públicas visa a melhor qualidade ao menor custo. A aquisição de equipamento médico, cada vez mais sofisticado, exige das instituições esforços redobrados. A necessidade de redução dos custos acoplada à necessidade de aquisição de tecnologias cada vez mais avançadas exige que as instituições tomem mediadas mais rigorosas para melhorar o processo de aquisição. É importante estabelecer desde o início de um processo de aquisição, as exatas necessidades da instituição, com um conjunto de especificações bem detalhado do produto a adquirir bem como um conjunto exigências que devem ser feitas perante os fornecedores que salvaguardem a instituição. O conhecimento do equipamento a adquirir facilita todo o processo. Assim é de extrema importância garantir o estudo bastante alargado do equipamento, permitindo à instituição uma melhor avaliação do equipamento, aquando da seleção do mesmo. A garantia da confiabilidade metrológica é outro ponto muito importante a ter em conta no processo, uma vez que o sucesso dos cuidados de saúde parte da confiança e segurança que transmitem aos seus utentes. O objetivo deste trabalho é o estudo de Ventiladores Pulmonares (VP) focando essencialmente na seleção e aquisição destes equipamentos. Neste estudo faz-se também um estudo dos procedimentos de avaliação da confiabilidade metrológica dos VP, tendo em vista a definição dos testes de verificação a serem efetuados ao longo do processo de aquisição. É normalizado o Caderno de Encargos (CE) e respetivas especificações/requisitos técnicos, tentando comprar de acordo com as reais necessidades da instituição, visando o menor desperdício e garantido a melhor qualidade.

Modelling and segmentation of the vocal tract during speech production by using deformable models in magnetic resonance images

The first and second authors would like to thank the support of the PhD grants with references SFRH/BD/28817/2006 and SFRH/PROTEC/49517/2009, respectively, from Fundação para a Ciência e Tecnol ogia (FCT). This work was partially done in the scope of the project “Methodologies to Analyze Organs from Complex Medical Images – Applications to Fema le Pelvic Cavity”, wi th reference PTDC/EEA- CRO/103320/2008, financially supported by FCT.

New insights on integer-programming models for the kidney exchange problem

In recent years several countries have set up policies that allow exchange of kidneys between two or more incompatible patient–donor pairs. These policies lead to what is commonly known as kidney exchange programs. The underlying optimization problems can be formulated as integer programming models. Previously proposed models for kidney exchange programs have exponential numbers of constraints or variables, which makes them fairly difficult to solve when the problem size is large. In this work we propose two compact formulations for the problem, explain how these formulations can be adapted to address some problem variants, and provide results on the dominance of some models over others. Finally we present a systematic comparison between our models and two previously proposed ones via thorough computational analysis. Results show that compact formulations have advantages over non-compact ones when the problem size is large.

QoS-based surrogates selection and service proposal formulation in offloading environments

Resource constraints are becoming a problem as many of the wireless mobile devices have increased generality. Our work tries to address this growing demand on resources and performance, by proposing the dynamic selection of neighbor nodes for cooperative service execution. This selection is in uenced by user's quality of service requirements expressed in his request, tailoring provided service to user's speci c needs. In this paper we improve our proposal's formulation algorithm with the ability to trade o time for the quality of the solution. At any given time, a complete solution for service execution exists, and the quality of that solution is expected to improve overtime.

Modelling adhesive joints with cohesive zone models: effect of the cohesive law shape of the adhesive layer

Adhesively-bonded joints are extensively used in several fields of engineering. Cohesive Zone Models (CZM) have been used for the strength prediction of adhesive joints, as an add-in to Finite Element (FE) analyses that allows simulation of damage growth, by consideration of energetic principles. A useful feature of CZM is that different shapes can be developed for the cohesive laws, depending on the nature of the material or interface to be simulated, allowing an accurate strength prediction. This work studies the influence of the CZM shape (triangular, exponential or trapezoidal) used to model a thin adhesive layer in single-lap adhesive joints, for an estimation of its influence on the strength prediction under different material conditions. By performing this study, guidelines are provided on the possibility to use a CZM shape that may not be the most suited for a particular adhesive, but that may be more straightforward to use/implement and have less convergence problems (e.g. triangular shaped CZM), thus attaining the solution faster. The overall results showed that joints bonded with ductile adhesives are highly influenced by the CZM shape, and that the trapezoidal shape fits best the experimental data. Moreover, the smaller is the overlap length (LO), the greater is the influence of the CZM shape. On the other hand, the influence of the CZM shape can be neglected when using brittle adhesives, without compromising too much the accuracy of the strength predictions.

Dermic diffusion and stratum corneum: a state of the art review of mathematical models

Transdermal biotechnologies are an ever increasing field of interest, due to the medical and pharmaceutical applications that they underlie. There are several mathematical models at use that permit a more inclusive vision of pure experimental data and even allow practical extrapolation for new dermal diffusion methodologies. However, they grasp a complex variety of theories and assumptions that allocate their use for specific situations. Models based on Fick's First Law found better use in contexts where scaled particle theory Models would be extensive in time-span but the reciprocal is also true, as context of transdermal diffusion of particular active compounds changes. This article reviews extensively the various theoretical methodologies for studying dermic diffusion in the rate limiting dermic barrier, the stratum corneum, and systematizes its characteristics, their proper context of application, advantages and limitations, as well as future perspectives.

Supporting real-time parallel task models with work-stealing

Dynamic parallel scheduling using work-stealing has gained popularity in academia and industry for its good performance, ease of implementation and theoretical bounds on space and time. Cores treat their own double-ended queues (deques) as a stack, pushing and popping threads from the bottom, but treat the deque of another randomly selected busy core as a queue, stealing threads only from the top, whenever they are idle. However, this standard approach cannot be directly applied to real-time systems, where the importance of parallelising tasks is increasing due to the limitations of multiprocessor scheduling theory regarding parallelism. Using one deque per core is obviously a source of priority inversion since high priority tasks may eventually be enqueued after lower priority tasks, possibly leading to deadline misses as in this case the lower priority tasks are the candidates when a stealing operation occurs. Our proposal is to replace the single non-priority deque of work-stealing with ordered per-processor priority deques of ready threads. The scheduling algorithm starts with a single deque per-core, but unlike traditional work-stealing, the total number of deques in the system may now exceed the number of processors. Instead of stealing randomly, cores steal from the highest priority deque.

Application of integer and fractional models in electrochemical systems

This paper describes the use of integer and fractional electrical elements, for modelling two electrochemical systems. A first type of system consists of botanical elements and a second type is implemented by electrolyte processes with fractal electrodes. Experimental results are analyzed in the frequency domain, and the pros and cons of adopting fractional-order electrical components for modelling these systems are compared.