Biochemical and structural characterization of β-lactamases tem-180 and tem-201

With the constant development of new antibiotics, selective pressure is a force to reckon when investigating antibiotic resistance. Although advantageous for medical treatments, it leads to increasing resistance. It is essential to use more potent and toxic antibiotics. Enzymes capable of hydrolyzing antibiotics are among the most common ways of resistance and TEM variants have been detected in several resistant isolates. Due to the rapid evolution of these variants, complex phenotypes have emerged and the need to understand their biological activity becomes crucial. To investigate the biochemical properties of TEM-180 and TEM-201 several computational methodologies have been used, allowing the comprehension of their structure and catalytic activity, which translates into their biological phenotype. In this work we intent to characterize the interface between these proteins and the several antibiotics used as ligands. We performed explicit solvent molecular dynamics (MD) simulations of these complexes and studied a variety of structural and energetic features. The interfacial residues show a distinct behavior when in complex with different antibiotics. Nevertheless, it was possible to identify some common Hot Spots among several complexes – Lys73, Tyr105 and Glu166. The structural changes that occur during the Molecular Dynamic (MD) simulation lead to the conclusion that these variants have an inherent capacity of adapting to the various antibiotics. This capability might be the reason why they can hydrolyze antibiotics that have not been described until now to be degraded by TEM variants. The results obtained with computational and experimental methodologies for the complex with Imipenem have shown that in order to this type of enzymes be able to acylate the antibiotics, they need to be capable to protect the ligand from water molecules.

Preservation of catechin antioxidant properties loaded in carbohydrate nanoparticles

Epigallocatechin gallate (EGCG), an antioxidant with several pharmacological and biological activities, was encapsulated in carbohydrate particles to preserve its antioxidant properties and improve its bioavailability. Gum arabic–maltodextrin particles loaded with EGCG (EGCG/P) were successfully produced by homogenization and spray-drying, with an EGCG loading efficiency of 96 ± 3%. Spray-dried particles are spherical or corrugated and polydisperse with diameters less than 20 m. The particles in aqueous suspension revealed two main populations, with mean average diameters of 40 nm and 400 nm. Attenuated total reflection-infrared spectroscopy (ATR-IR) confirmed that EGCG was incorporated in the carbohydrate matrix by intermolecular interactions, maintaining its chemical integrity. Atomic force microscopy imaging proved the particle spherical shape and size. The present study demonstrates that the carbohydrate matrix is able to preserve EGCG antioxidant properties, as proof of concept to be used as polymeric drug carrier.

Angolan cymbopogon citratus used for therapeutic benefits: nutritional composition and influence of solvents in phytochemicals content and antioxidant activity of leaf extracts

Folk medicine is a relevant and effective part of indigenous healthcare systems which are, in practice, totally dependent on traditional healers. An outstanding coincidence between indigenous medicinal plant uses and scientifically proved pharmacological properties of several phytochemicals has been observed along the years. This work focused on the leaves of a medicinal plant traditionally used for therapeutic benefits (Angolan Cymbopogon citratus), in order to evaluate their nutritional value. The bioactive phytochemical composition and antioxidant activity of leaf extracts prepared with different solvents (water, methanol and ethanol) were also evaluated. The plant leaves contained ~60% of carbohydrates, protein (~20%), fat (~5%), ash (~4%) and moisture (~9%). The phytochemicals screening revealed the presence of tannins, flavonoids, and terpenoids in all extracts. Methanolic extracts also contained alkaloids and steroids. Several methods were used to evaluate total antioxidant capacity of the different extracts (DPPH; NO; and H2O2 scavenging assays, reducing power, and FRAP). Ethanolic extracts presented a significantly higher antioxidant activity (p < 0.05) except for FRAP, in which the best results were achieved by the aqueous extracts. Methanolic extracts showed the lowest radical scavenging activities for both DPPH; and NO; radicals.

Nutritional composition of low protein and phenylalanine-restricted dishes prepared for phenylketonuric patients

Nutritional management is essential for Phenylketonuria (PKU) treatment, consisting in a semi-synthetic and low phenylalanine (Phe) diet, which includes strictly controlled amounts of low protein natural foods (essentially fruits and vegetables) supplemented with Phe-free protein substitutes and dietetic low-protein products. PKU diet has to be carefully planned, providing the best ingredient combinations, so that patients can achieve good metabolic control and an adequate nutritional status. Hereupon, it is mandatory to know the detailed composition of natural and/or cooked foodstuffs prepared specifically for these patients. We intended to evaluate sixteen dishes specifically prepared for PKU patients, regarding the nutritional composition, Phe and tyrosine (Tyr) contents, fatty acids profile, and vitamins E and B12 amounts. The nutritional composition of the cooked samples was 15.5–92.0 g/100 g, for moisture; 0.7–3.2 g/100 g, for protein; 0.1–25.0 g/100 g, for total fat; and 5.0–62.0 g/100 g, for total carbohydrates. Fatty acids profile and vitamin E amount reflected the type of fat used. All samples were poor in vitamin B12 (0.3–0.8 μg/100 g). Boiled rice presented the highest Phe content: 50.3 mg/g of protein. These data allow a more accurate calculation of the diet portions to be ingested by the patients according to their individual tolerance.

Caracterização física e química de fíleres para fabrico de misturas betuminosas

Mestrado em Engenharia Geotécnica e Geoambiente

Viabilidade económica e energética do biodiesel produzido a partir de Chlorella vulgaris

Contemporaneamente o Homem depara-se com um dos grandes desafios que é o de efetivar a transição para um futuro sustentável. Assim, o setor da energia tem um papel fundamental neste processo de transição, com principal enfoque no setor dos automóveis, sendo este um setor que contribui com elevadas quantidades de gases de efeito estufa libertados para a atmosfera. Também a escassez dos recursos petrolíferos constitui um ponto fundamental no tema apresentado. Com a necessidade de combater esses problemas é que se tem vindo a tentar desenvolver combustíveis renováveis e neutros quanto às emissões. A primeira geração de biocombustíveis obtidos através de culturas agrícolas terrestres preenche em parte esses requisitos, porém, não atinge os valores da procura e ainda competem com a produção de alimentos. Daí o interesse na aposta de uma segunda geração de biocombustíveis produzidos de fontes que não pertencem à cadeia alimentar e são residuais mas, que mesmo assim não permitem satisfazer as necessidades de matériaprima. A terceira geração de biocombustíveis vem justamente responder a estas questões pois assenta em matérias-primas que não competem pela utilização do solo agrícola nem são usadas para fins alimentares, tendo produtividades areais substancialmente superiores às que as culturas convencionais ou biomassas residuais conseguem assegurar. A matéria prima de terceira geração são portanto as microalgas, cujas produtividades em biomassa são extremamente elevadas, para além de produtividades muito superiores em lípidos, hidratos de carbono e/ou outros produtos de valor elevado. No entanto, este tipo de produção de biocombustível ainda enfrenta alguns problemas técnicos que o tornam num processo dispendioso para competir economicamente com outros tipos de produção de biodiesel. Na linha do que foi dito anteriormente, este trabalho apresenta um estudo de viabilidade económica e energética do biodiesel produzido através da Chlorella vulgaris, apresentando as técnicas e resultados de cultivo da Chlorella vulgaris e posteriormente de produção do biodiesel através dos lípidos obtidos através da mesma. Para melhorar a colheita das microalgas, que é uma das fases mais dispendiosas, testou-se o aumento de pH e a adição de um floculante (Pax XL-10), sendo que o primeiro não permitiu obter resultados satisfatórios, enquanto o segundo permitiu obter resultados de rendimento na ordem dos 90%. Mesmo com a melhoria da etapa da colheita, o preço mínimo do biodiesel produzido a partir do óleo de Chlorella vulgaris, com as condições ótimas de cultivo e produtividades máximas encontradas na literatura, foi de 8,76 €/L, pois, na análise económica, o Pax XL-10 revelou-se extremamente caro para utilizar na floculação de microalgas para obtenção de um produto de baixo valor, como é o biodiesel. A não utilização da floculação reduz o preço do biodiesel para 7,85 €/L. O que se pode concluir deste trabalho é que face às técnicas utilizadas, a produção de biodiesel Chlorella vulgaris apenas, não é economicamente viável, pelo que para viabilizar a sustentabilidade do processo seria ainda necessário desenvolver mais esforços no sentido de otimizar a produção de biodiesel, eventualmente associando-a à produção de um outro biocombustível produzido a partir da biomassa extraída residual e/ou da recuperação de outros produtos de maior valor.

Synthesis of molecular biomimetics

Biomimetics has paved the way toward new materials and technologies inspired in Nature. Biomolecules and their supramolecular organization have today a leading role in biomimetics, benefiting from the recent advances in nanotechnology. The production of biomimetic materials may be however a difficult task, because Nature does it very well. The use of several building blocks assembled in bottom-up arrangement is without doubt at the core of this process. Such building blocks include different molecules or molecular arrangements, of synthetic or natural origin, such as amino acids, lipids, carbohydrates, nucleic acids, carbon allotropes, dendrimers, or organosilanes, among others. The most common approaches to produce synthetic biomimetic materials are reported herein, with special emphasis to building blocks and their supramolecular arrangement.