6 resultados para Porta, Carlo Antonio Melchiore Filippo, 1775-1821.
em Instituto Politécnico do Porto, Portugal
Resumo:
This paper proposes a new methodology to reduce the probability of occurring states that cause load curtailment, while minimizing the involved costs to achieve that reduction. The methodology is supported by a hybrid method based on Fuzzy Set and Monte Carlo Simulation to catch both randomness and fuzziness of component outage parameters of transmission power system. The novelty of this research work consists in proposing two fundamentals approaches: 1) a global steady approach which deals with building the model of a faulted transmission power system aiming at minimizing the unavailability corresponding to each faulted component in transmission power system. This, results in the minimal global cost investment for the faulted components in a system states sample of the transmission network; 2) a dynamic iterative approach that checks individually the investment’s effect on the transmission network. A case study using the Reliability Test System (RTS) 1996 IEEE 24 Buses is presented to illustrate in detail the application of the proposed methodology.
Fuzzy Monte Carlo mathematical model for load curtailment minimization in transmission power systems
Resumo:
This paper presents a methodology which is based on statistical failure and repair data of the transmission power system components and uses fuzzyprobabilistic modeling for system component outage parameters. Using statistical records allows developing the fuzzy membership functions of system component outage parameters. The proposed hybrid method of fuzzy set and Monte Carlo simulation based on the fuzzy-probabilistic models allows catching both randomness and fuzziness of component outage parameters. A network contingency analysis to identify any overloading or voltage violation in the network is performed once obtained the system states by Monte Carlo simulation. This is followed by a remedial action algorithm, based on optimal power flow, to reschedule generations and alleviate constraint violations and, at the same time, to avoid any load curtailment, if possible, or, otherwise, to minimize the total load curtailment, for the states identified by the contingency analysis. In order to illustrate the application of the proposed methodology to a practical case, the paper will include a case study for the Reliability Test System (RTS) 1996 IEEE 24 BUS.
Resumo:
This paper present a methodology to choose the distribution networks reconfiguration that presents the lower power losses. The proposed methodology is based on statistical failure and repair data of the distribution power system components and uses fuzzy-probabilistic modeling for system component outage parameters. The proposed hybrid method using fuzzy sets and Monte Carlo simulation based on the fuzzyprobabilistic models allows catching both randomness and fuzziness of component outage parameters. A logic programming algorithm is applied, once obtained the system states by Monte Carlo Simulation, to get all possible reconfigurations for each system state. To evaluate the line flows and bus voltages and to identify if there is any overloading, and/or voltage violation an AC load flow has been applied to select the feasible reconfiguration with lower power losses. To illustrate the application of the proposed methodology, the paper includes a case study that considers a 115 buses distribution network.
Resumo:
Com a crescente sensibilização mundial relativa ao aquecimento global, provocado pela alta quantidade de emissão de gases com efeito de estufa, torna-se imperativa a redução de consumos de combustíveis fósseis e consecutivas emissões. Ao nível da construção civil, uma intervenção eficaz na prevenção de perdas de ar aquecido poderá levar a diminuições superiores a 50% na utilização de energia. Este trabalho pretende estudar a importância da eficiência energética nos edifícios, com especial enfoque na sua permeabilidade ao ar. O ensaio de porta ventiladora permite avaliar esta permeabilidade e identificar os locais onde se dão as infiltrações, nomeadamente com auxílio da câmara térmica. O principal objectivo é estudar a aplicação deste ensaio na legislação em desenvolvimento no âmbito da certificação energética, através da comparação dos resultados de quatro habitações distintas. Também ao nível da eficiência energética, será obtida a classe energética, segundo a legislação em vigor à corrente data em Portugal, de uma das habitaçãoes ensaiadas e propostas medidas de melhoria para o desempenho energético desta. Do estudo efectuado é destacado o facto de o valor de renovações horárias do ar interior de uma fracção ser sempre inferior quando obtido unicamente através da legislação em desenvolvimento, em comparação com a obtenção deste através da legislação com auxílio do ensaio da porta ventiladora, o que leva a um grande desincentivo na utilização deste.