Friction losses of Newtonian and non-Newtonian fluids flowing in laminar regime in a helical coil

This study aimed to carry out experimental work to determine, for Newtonian and non-Newtonian fluids, the friction factor (fc) with simultaneous heat transfer, at constant wall temperature as boundary condition, in fully developed laminar flow inside a vertical helical coil. The Newtonian fluids studied were aqueous solutions of glycerol, 25%, 36%, 43%, 59% and 78% (w/w). The non-Newtonian fluids were aqueous solutions of carboxymethylcellulose (CMC), a polymer, with concentrations of 0.2%, 0.3%, 0.4% and 0.6% (w/w) and aqueous solutions of xanthan gum (XG), another polymer, with concentrations of 0.1% and 0.2% (w/w). According to the rheological study done, the polymer solutions had shear-thinning behavior and different values of viscoelasticity. The helical coil used has an internal diameter, curvature ratio, length and pitch, respectively: 0.00483 m, 0.0263, 5.0 m and 11.34 mm. It was concluded that the friction factors, with simultaneous heat transfer, for Newtonian fluids can be calculated using expressions from literature for isothermal flows. The friction factors for CMC and XG solutions are similar to those for Newtonian fluids when the Dean number, based in a generalized Reynolds number, is less than 80. For Dean numbers higher than 80, the friction factors of the CMC solutions are lower those of the XG solutions and of the Newtonian fluids. In this range the friction factors decrease with the increase of the viscometric component of the solution and increase for increasing elastic component. The change of behavior at Dean number 80, for Newtonian and non-Newtonian fluids, is in accordance with the study of Ali [4]. There is a change of behavior at Dean number 80, for Newtonian and non-Newtonian fluids, which is in according to previous studies. The data also showed that the use of the bulk temperature or of the film temperature to calculate the physical properties of the fluid has a residual effect in the friction factor values.

Heat transfer coefficients from Newtonian and non-Newtonian fluids flowing in laminar regime in a helical coil

This study aimed to carry out experimental work to obtain, for Newtonian and non-Newtonian fluids, heat transfer coefficients, at constant wall temperature as boundary condition, in fully developed laminar flow inside a helical coil. The Newtonian fluids studied were aqueous solutions of glycerol, 25%, 36%, 43%, 59% and 78% (w/w) and the non-Newtonian fluids aqueous solutions of carboxymethylcellulose (CMC), a polymer, with concentrations 0.1%, 0.2%, 0.3%, 0.4% and 0.6% (w/w) and aqueous solutions of xanthan gum (XG), another polymer, with concentrations 0.1% and 0.2% (w/w). According to the rheological study performed, the polymer solutions had shear thinning behavior and different values of elasticity. The helical coil used has internal diameter, curvature ratio, length and pitch, respectively: 0.004575 m, 0.0263, 5.0 m and 11.34 mm. The Nusselt numbers for the CMC solutions are, on average, slightly higher than those for Newtonian fluids, for identical Prandtl and generalized Dean numbers. As outcome, the viscous component of the shear thinning polymer tends to potentiate the mixing effect of the Dean cells. The Nusselt numbers of the XG solutions are significant lower than those of the Newtonian solutions, for identical Prandtl and generalized Dean numbers. Therefore, the elastic component of the polymer tends to diminish the mixing effect of the Dean cells. A global correlation, for Nusselt number as a function of Péclet, generalized Dean and Weissenberg numbers for all Newtonian and non-Newtonian solutions studied, is presented.

Which “place and non-place” do women occupy in social economy organisations?

Scientific literature has strengthened the perpetuation of inequality factors in the labour market based on gender, despite the on-going endeavour of various political bodies and legal norms against the vertical and horizontal segregation of women. National and European statistical data shows the relevance and timeless features of theories of market segmentation associated with the labour market dating back to the 70’s of the 20th century. Hence, the European Community considers as a priority in the Europe 2020 strategy, the definition of “policies to promote gender equality […] to increase labour force participation thus adding to growth and social cohesion”. If we consider that on the one hand, social economy is fairly recognised to be equated with market actors and the State for its economic and social role in tackling the current crisis, and on the other hand, that the ideals of the sector, systematised in the “Framework Law of Social Economy” (Law no. 30/2013 8th of May), particularly in article 5 proposing “the respect for the values […] of equality and non-discrimination […], justice and equity […]”, we aim to reflect on indicators that uncover a vertical and horizontal segregation in the labour market. Departing from a mixed methodological approach (extensive and intensive), subject to the topic of "Social Entrepreneurship in Portugal" in social economy organisations, we detect very high rates of employment feminisation, with a ratio of 1 man (23%) for every 3 women (77%). Women are mainly earmarked for technical and operational activities, arising from the privileged intervention areas, namely education, training, health, elderly, families, poverty, ultimately being underrepresented in statutory boards and, as such, far removed from deliberations and strategic resolutions. This is particularly visible in the existing hierarchy of functions and management practices of the responsibility of male members. Thus, it seems easily verified that the sector is travelling away from the ideals of justice and social equity, which can crystallise the "non-place" of women in the definition of a strategic direction of social economy and in the most invisible/private “place” of the organisational setting.