45 resultados para Non-ideal mixtures

em Instituto Politécnico do Porto, Portugal


Relevância:

80.00% 80.00%

Publicador:

Resumo:

The interest for environmental fate assessment of chiral pharmaceuticals is increasing and enantioselective analytical methods are mandatory. This study presents an enantioselective analytical method for the quantification of seven pairs of enantiomers of pharmaceuticals and a pair of a metabolite. The selected chiral pharmaceuticals belong to three different therapeutic classes, namely selective serotonin reuptake inhibitors (venlafaxine, fluoxetine and its metabolite norfluoxetine), beta-blockers (alprenolol, bisoprolol, metoprolol, propranolol) and a beta2-adrenergic agonist (salbutamol). The analytical method was based on solid phase extraction followed by liquid chromatography tandem mass spectrometry with a triple quadrupole analyser. Briefly, Oasis® MCX cartridges were used to preconcentrate 250 mL of water samples and the reconstituted extracts were analysed with a Chirobiotic™ V under reversed mode. The effluent of a laboratory-scale aerobic granular sludge sequencing batch reactor (AGS-SBR) was used to validate the method. Linearity (r2 > 0.99), selectivity and sensitivity were achieved in the range of 20–400 ng L−1 for all enantiomers, except for norfluoxetine enantiomers which range covered 30–400 ng L−1. The method detection limits were between 0.65 and 11.5 ng L−1 and the method quantification limits were between 1.98 and 19.7 ng L−1. The identity of all enantiomers was confirmed using two MS/MS transitions and its ion ratios, according to European Commission Decision 2002/657/EC. This method was successfully applied to evaluate effluents of wastewater treatment plants (WWTP) in Portugal. Venlafaxine and fluoxetine were quantified as non-racemic mixtures (enantiomeric fraction ≠ 0.5). The enantioselective validated method was able to monitor chiral pharmaceuticals in WWTP effluents and has potential to assess the enantioselective biodegradation in bioreactors. Further application in environmental matrices as surface and estuarine waters can be exploited.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

New arguments proving that successive (repeated) measurements have a memory and actually remember each other are presented. The recognition of this peculiarity can change essentially the existing paradigm associated with conventional observation in behavior of different complex systems and lead towards the application of an intermediate model (IM). This IM can provide a very accurate fit of the measured data in terms of the Prony's decomposition. This decomposition, in turn, contains a small set of the fitting parameters relatively to the number of initial data points and allows comparing the measured data in cases where the “best fit” model based on some specific physical principles is absent. As an example, we consider two X-ray diffractometers (defined in paper as A- (“cheap”) and B- (“expensive”) that are used after their proper calibration for the measuring of the same substance (corundum a-Al2O3). The amplitude-frequency response (AFR) obtained in the frame of the Prony's decomposition can be used for comparison of the spectra recorded from (A) and (B) - X-ray diffractometers (XRDs) for calibration and other practical purposes. We prove also that the Fourier decomposition can be adapted to “ideal” experiment without memory while the Prony's decomposition corresponds to real measurement and can be fitted in the frame of the IM in this case. New statistical parameters describing the properties of experimental equipment (irrespective to their internal “filling”) are found. The suggested approach is rather general and can be used for calibration and comparison of different complex dynamical systems in practical purposes.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Scientific literature has strengthened the perpetuation of inequality factors in the labour market based on gender, despite the on-going endeavour of various political bodies and legal norms against the vertical and horizontal segregation of women. National and European statistical data shows the relevance and timeless features of theories of market segmentation associated with the labour market dating back to the 70’s of the 20th century. Hence, the European Community considers as a priority in the Europe 2020 strategy, the definition of “policies to promote gender equality […] to increase labour force participation thus adding to growth and social cohesion”. If we consider that on the one hand, social economy is fairly recognised to be equated with market actors and the State for its economic and social role in tackling the current crisis, and on the other hand, that the ideals of the sector, systematised in the “Framework Law of Social Economy” (Law no. 30/2013 8th of May), particularly in article 5 proposing “the respect for the values […] of equality and non-discrimination […], justice and equity […]”, we aim to reflect on indicators that uncover a vertical and horizontal segregation in the labour market. Departing from a mixed methodological approach (extensive and intensive), subject to the topic of "Social Entrepreneurship in Portugal" in social economy organisations, we detect very high rates of employment feminisation, with a ratio of 1 man (23%) for every 3 women (77%). Women are mainly earmarked for technical and operational activities, arising from the privileged intervention areas, namely education, training, health, elderly, families, poverty, ultimately being underrepresented in statutory boards and, as such, far removed from deliberations and strategic resolutions. This is particularly visible in the existing hierarchy of functions and management practices of the responsibility of male members. Thus, it seems easily verified that the sector is travelling away from the ideals of justice and social equity, which can crystallise the "non-place" of women in the definition of a strategic direction of social economy and in the most invisible/private “place” of the organisational setting.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

In Europe, the first half of the twentieth century was characterize by the rise of authoritarian regimes that used cinema as a propaganda tool for the prosecution and consolidation of political power. Indeed, film conveyed images, symbols, myths to an extent and strength that no other media had. In Portugal, the 1930 and 1940’s represent one of the most significant phases, either because of the introduction/strengthening of the technology of sound cinema, whether by the action of the Secretariado Nacional de Propaganda, the propaganda instrument of Estado Novo. Among the multitude of ways that this organization resorted to spread the political message of Estado Novo, cinema in particular aroused the attention of its director, António Ferro, as a preferred mean of communication with the masses. This communication seeks to examine the role played by António Ferro in the national film scene. It intends to determine the nature and direction of his cinematographic vision, i.e., his ethical and aesthetic assumptions, firstly, and secondly, its political action towards the portuguese film industry, as director of the SPN / SNI, under the tutelage of Oliveira Salazar.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Em Portugal, as décadas de 1930 e 1940 constituem um período importante, quer pela introdução/consolidação tecnológica do cinema sonoro, quer pela acção do Secretariado da Propaganda Nacional. Dentre a multitude de meios de que este organismo se serviu para a difusão da mensagem política do regime do Estado Novo, o cinema desperta em particular a atenção do seu director, António Ferro, como meio privilegiado de comunicação com as massas. Neste artigo procura-se averiguar o papel desempenhado por António Ferro no panorama cinematográfico nacional, a nível da sua acção política sobre o cinema português.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Small firms are a major player in development. Thus, entrepreneurship is frequently attached to these rms and it must be present in daily management of factors such as planning and cooperation. We intend to analyze these factors, comparing familiar and non-familiar businesses. This study was conducted in a Portuguese region in the north of Portugal - Vale do Sousa . The results allow us to conclude that even with some managerial di erences it was not possible to identify distinct patterns between them. The main goal of this paper is to open research lines on important issues to distinguish familiar from non-familiar businesses.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The goal of the present paper is to analyse the classic entrepreneurship strategies (Innovation, Risk and Proactivity) in small and medium-sized businesses. However as presented in the title, the study will go further by comparing the results of those strategies in familiar and nonfamiliar businesses. This study was carried on in construction and industry sectors, in the region of Vale do Sousa, in the north of Portugal. In order to classify businesses as familiar or non-familiar types two criterion were adopted: (1) Management Control, (2) Family Employability. On the opposite to some studies that present a larger percentage of familiar businesses in national and European entrepreneurial fabric, the criterion used leaded to a larger number of non-familiar businesses (53%). The results showed that in general SMEs in this region are not following entrepreneurship strategies. Analysing the entire sample without a separation of businesses by nature (familiar/non-familiar) only proactivity showed to be more present in the managerial decisions. There is a lack of innovation and risk culture. Comparing the groups only on proactivity tests was possible to verify some differences. It was concluded that non-familiar businesses are more proactive than familiar ones. Between those groups there are no statistical differences on the means of the variables innovation and risk. At the same time some tests were conducted to test the differences on the variable entrepreneurship. The results were similar to innovation and risk strategies: There are no significant differences on entrepreneurship between these groups of businesses.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Mestrado em Engenharia Química. Ramo optimização energética na indústria química.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The goal of this work was the treatment of polluted waste gases in a bubble column reactor (BCR), in order to determinate the maximum value of reactor’s efficiency (RE), varying the inlet concentration (C in) of the pollutants. The gaseous mixtures studied were: (i) air with styrene and (ii) air with styrene and acetone. The liquid phase used to contain the biomass in the reactor was a basal salt medium (BSM), fundamental for the microorganisms’ development. The reactor used in this project consists of a glass column of 620mm height and inside diameter 75mm. In all essays there were continually measured: pH, dissolved oxygen and liquid’s temperature. Temperature and pH were controlled (T=24ºC, 7.0 ≤ pH ≤ 7.7). In all experiments the liquid volume (including the biomass) used in the reactor was kept constant (1.5L) as well as the total gas flowrate (1 L/min). Concerning the goal of the work, some parameters were calculated: the organic load (OL), removal efficiency (RE), elimination capacity (EC), biomass concentration (xf) and dry biomass concentration (Xdw). In a first series of experiments, the gas mixture used was air with styrene, varying its concentration from 191 mg.m-3 to 6500 mg.m-3.It was concluded that the RE maximum value (97%) was obtained for C in Sty = 4200 mg.m-3. For the maximum tested value of C in Sty, RE obtained was 20%. In a second step, the gaseous mixture included acetone, varying C in Sty between 225 mg.m-3 and 2659 mg.m-3 and C in Ac between 153mg.m-3 and 1389 mg.m-3. The aim of these tests was the determination of C in Ac for which RE was maximum, obtaining C in Ac = 750 mg.m-3. A third series of experiments was performed, in which C in Ac was maintained equal to that value and C in Sty was varied until higher values (5422 mg.m-3). RE maximum values obtained in this last series were 100% for styrene and 40% for acetone. One important conclusion is the fact that the microorganisms available degrade better styrene than acetone. On the ambit of this study, it was possible to identify the species available in biomass: Xanthobacter antotrophicus py2, Enterobacter aerogenes, Nocardia, Corynebacterium Spp., Rhodococcus rhodochrous e Pseudomonas Sp.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Although Mobility is a trendy and an important keyword in education matters, it has been a knowledge tool since the beginning of times, namely the Classical Antiquity, when students were moving from place to place following the masters. Over the time, different types of academic mobility can be found and this tool has been taken both by the education and business sector as almost a compulsory process since the world has gone global. Mobility is, of course, not an end but a means. And as far as academic mobility is concerned it is above all a means to get knowledge, being it theoretical or practical. But why does it still make sense to move from one place to another to get knowledge if never as before we have heaps of information and experiences available around us, either through personal contacts, in books, journals, newspapers or online? With this paper we intend to discuss the purpose of international mobility in the global world of the 21st century as a means to the development of world citizens able to live, work and learn in different and unfamiliar contexts. Based on our own experience as International Coordinator in a Higher Education Institution (HEI) over the last 8 years, on the latest research on academic mobility and still on studies on employability we will show how and why academic mobility can develop skills either in students or in other academic staff that are hardly possible to build in a classroom, or in a non-mobile academic or professional experience and that are highly valued by employers and society in general.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

23rd SPACE AGM and Conference from 9 to 12 May 2012 Conference theme: The Role of Professional Higher Education: Responsibility and Reflection Venue: Mikkeli University of Applied Sciences, Mikkeli, Finland

Relevância:

20.00% 20.00%

Publicador:

Resumo:

As polycyclic aromatic hydrocarbons (PAHs) have a negative impact on human health due to their mutagenic and/or carcinogenic properties, the objective of this work was to study the influence of tobacco smoke on levels and phase distribution of PAHs and to evaluate the associated health risks. The air samples were collected at two homes; 18 PAHs (the 16 PAHs considered by U.S. EPA as priority pollutants, dibenzo[a,l]pyrene and benzo[j]fluoranthene) were determined in gas phase and associated with thoracic (PM10) and respirable (PM2.5) particles. At home influenced by tobacco smoke the total concentrations of 18 PAHs in air ranged from 28.3 to 106 ngm 3 (mean of 66.7 25.4 ngm 3),∑PAHs being 95% higher than at the non-smoking one where the values ranged from 17.9 to 62.0 ngm 3 (mean of 34.5 16.5 ngm 3). On average 74% and 78% of ∑PAHs were present in gas phase at the smoking and non-smoking homes, respectively, demonstrating that adequate assessment of PAHs in air requires evaluation of PAHs in both gas and particulate phases. When influenced by tobacco smoke the health risks values were 3.5e3.6 times higher due to the exposure of PM10. The values of lifetime lung cancer risks were 4.1 10 3 and 1.7 10 3 for the smoking and nonsmoking homes, considerably exceeding the health-based guideline level at both homes also due to the contribution of outdoor traffic emissions. The results showed that evaluation of benzo[a]pyrene alone would probably underestimate the carcinogenic potential of the studied PAH mixtures; in total ten carcinogenic PAHs represented 36% and 32% of the gaseous ∑PAHs and in particulate phase they accounted for 75% and 71% of ∑PAHs at the smoking and non-smoking homes, respectively.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Screening of topologies developed by hierarchical heuristic procedures can be carried out by comparing their optimal performance. In this work we will be exploiting mono-objective process optimization using two algorithms, simulated annealing and tabu search, and four different objective functions: two of the net present value type, one of them including environmental costs and two of the global potential impact type. The hydrodealkylation of toluene to produce benzene was used as case study, considering five topologies with different complexities mainly obtained by including or not liquid recycling and heat integration. The performance of the algorithms together with the objective functions was observed, analyzed and discussed from various perspectives: average deviation of results for each algorithm, capacity for producing high purity product, screening of topologies, objective functions robustness in screening of topologies, trade-offs between economic and environmental type objective functions and variability of optimum solutions.