7 resultados para Measurement questionnaires
em Instituto Politécnico do Porto, Portugal
Resumo:
Objectives : The purpose of this article is to find out differences between surveys using paper and online questionnaires. The author has deep knowledge in the case of questions concerning opinions in the development of survey based research, e.g. the limits of postal and online questionnaires. Methods : In the physician studies carried out in 1995 (doctors graduated in 1982-1991), 2000 (doctors graduated in 1982-1996), 2005 (doctors graduated in 1982-2001), 2011 (doctors graduated in 1977-2006) and 457 family doctors in 2000, were used paper and online questionnaires. The response rates were 64%, 68%, 64%, 49% and 73%, respectively. Results : The results of the physician studies showed that there were differences between methods. These differences were connected with using paper-based questionnaire and online questionnaire and response rate. The online-based survey gave a lower response rate than the postal survey. The major advantages of online survey were short response time; very low financial resource needs and data were directly loaded in the data analysis software, thus saved time and resources associated with the data entry process. Conclusions : The current article helps researchers with planning the study design and choosing of the right data collection method.
Resumo:
A novel biomimetic sensor for the potentiometric transduction of oxytetracycline is presented. The artificial host was imprinted in methacrylic acid and/or acrylamide based polymers. Different amounts of molecularly imprinted and non-imprinted polymers were dispersed in different plasticizing solvents and entrapped in a poly(vinyl chloride) matrix. Only molecularly imprinted based sensors allowed a potentiometric transduction, suggesting the existence of host–guest interactions. These sensors exhibited a near-Nernstian response in steady state evaluations; slopes and detection limits ranged 42–63 mV/decade and 2.5–31.3 µg/mL, respectively. Sensors were independent from the pH of test solutions within 2–5. Good selectivity was observed towards glycine, ciprofloxacin, creatinine, acid nalidixic, sulfadiazine, cysteine, hydroxylamine and lactose. In flowing media, the biomimetic sensors presented good reproducibility (RSD of ±0.7%), fast response, good sensitivity (65 mV/decade), wide linear range (5.0×10−5 to 1.0×10−2 mol/L), low detection limit (19.8 µg/mL), and a stable baseline for a 5×10−3M citrate buffer (pH 2.5) carrier. The sensors were successfully applied to the analysis of drugs and urine. This work confirms the possibility of using molecularly imprinted polymers as ionophores for organic ion recognition in potentiometric transduction.
Resumo:
Considering tobacco smoke as one of the most health-relevant indoor sources, the aim of this work was to further understand its negative impacts on human health. The specific objectives of this work were to evaluate the levels of particulate-bound PAHs in smoking and non-smoking homes and to assess the risks associated with inhalation exposure to these compounds. The developed work concerned the application of the toxicity equivalency factors approach (including the estimation of the lifetime lung cancer risks, WHO) and the methodology established by USEPA (considering three different age categories) to 18 PAHs detected in inhalable (PM10) and fine (PM2.5) particles at two homes. The total concentrations of 18 PAHs (ΣPAHs) was 17.1 and 16.6 ng m−3 in PM10 and PM2.5 at smoking home and 7.60 and 7.16 ng m−3 in PM10 and PM2.5 at non-smoking one. Compounds with five and six rings composed the majority of the particulate PAHs content (i.e., 73 and 78 % of ΣPAHs at the smoking and non-smoking home, respectively). Target carcinogenic risks exceeded USEPA health-based guideline at smoking home for 2 different age categories. Estimated values of lifetime lung cancer risks largely exceeded (68–200 times) the health-based guideline levels at both homes thus demonstrating that long-term exposure to PAHs at the respective levels would eventually cause risk of developing cancer. The high determined values of cancer risks in the absence of smoking were probably caused by contribution of PAHs from outdoor sources.
Resumo:
This paper presents the results of an exploratory study on knowledge management in Portuguese organizations. The study was based on a survey sent to one hundred of the main Portuguese organizations, in order to know their current practices relating knowledge management systems (KMS) usage and intellectual capital (IC) measurement. With this study, we attempted to understand what are the main tools used to support KM processes and activities in the organizations, and what metrics are pointed by organizations to measure their knowledge assets.
Resumo:
Adhesive bonding is an excellent alternative to traditional joining techniques such as welding, mechanical fastening or riveting. However, there are many factors that have to be accounted for during joint design to accurately predict the joint strength. One of these is the adhesive layer thickness (tA). Most of the results are for epoxy structural adhesives, tailored to perform best with small values of tA, and these show that the lap joint strength decreases with increase of tA (the optimum joint strength is usually obtained with tA values between 0.1 and 0.2 mm). Recently, polyurethane adhesives were made available in the market, designed to perform with larger tA values, and whose fracture behaviour is still not studied. In this work, the effect of tA on the tensile fracture toughness (View the MathML source) of a bonded joint is studied, considering a novel high strength and ductile polyurethane adhesive for the automotive industry. This work consists on the fracture characterization of the bond by a conventional and the J-integral techniques, which accurately account for root rotation effects. An optical measurement method is used for the evaluation of crack tip opening (δn) and adherends rotation at the crack tip (θo) during the test, supported by a Matlab® sub-routine for the automated extraction of these parameters. As output of this work, fracture data is provided in traction for the selected adhesive, enabling the subsequent strength prediction of bonded joints.
Resumo:
O planeamento estratégico é uma ferramenta usada pelas empresas, como forma de contribuir para a melhoria do seu desempenho, preconizando a concretização de objetivos. A comunicação organizacional interna é um o instrumento que, para além de traduzir uma mensagem enviada aos vários indivíduos da empresa, ajuda a interpretação dessa mensagem. Este estudo tem como objetivo perceber se, o planeamento estratégico pode ser um instrumento de melhoria conceptual e de gestão da comunicação organizacional interna. Neste trabalho utilizamos uma metodologia de estudo de caso único, suportada através do método qualitativo, com recurso a entrevistas, e do método quantitativo, através de questionários estruturados. As entrevistas aos quadros superiores da empresa foram realizadas com recuso a uma análise de conteúdo, verificando-se ser de extrema importância para a gestão, tanto o planeamento estratégico, como a comunicação interna. Os instrumentos de medida usados permitiram concluir que existem, ainda, algumas lacunas de planeamento e comunicação da empresa analisada. Da análise do caso em estudo é percetível que o planeamento estratégico, como a comunicação organizacional interna, são instrumentos usados com um nível de sucesso suficiente para colocar a empresa no rumo certo e estável de mercado. Por último, entendemos que no âmbito da conciliação dos dois temas, o planeamento estratégico facilita uma comunicação mais fluída, podendo, assim, ser um instrumento de melhoria da comunicação interna. Como limitações deste trabalho relatamos, em especial, a necessária precaução da generalização dos resultados obtidos e a dificuldade em realizar uma análise mais ampla na discussão de resultados, devido aos parcos trabalhos internacionais e, sobretudo, nacionais. A principal originalidade deste estudo decorre de ser utilizada uma análise com triangulação metodológica e o facto de a unidade de análise em estudo ser uma empresa líder na sua área de negócio e setor.
Resumo:
Para as organizações sobreviverem num novo ambiente competitivo, tiveram que deixar de procurar obter vantagens competitivas nos seus recursos tangíveis para as procurarem nos ativos intangíveis. Assim, várias investigações comprovam a necessidade de se dar a devida importância ao conceito de Capital Intelectual como fonte de criação de vantagens competitivas para as organizações. Esta importância aplica-se a vários níveis de análise entre os quais o setor público. Esta investigação visa analisar a importância relativa de cada dimensão do capital intelectual de uma Instituição de Ensino, bem como o impacto do mesmo na performance (percecionada pelos seus stakeholders). Nesta dissertação adotamos o método de Estudo de Caso, utilizando uma abordagem mista – quantitativa e qualitativa. Utilizámos variadas técnicas na recolha de dados, tais como: entrevista, registo de áudio e questionários. Relativamente à análise de dados, efetuamos uma análise de conteúdo, análise de documentos e análise estatística. Ao nível de resultados, a análise qualitativa sugere que as três dimensões do Capital Intelectual (Capital Humano, Capital Estrutural e Capital Relacional) devem possuir a mesma importância relativa para avaliar o capital intelectual de uma Instituição de Ensino. Os resultados quantitativos sugerem que o capital intelectual tem impacto na performance, o que está em linha com a literatura sobre o tema. Finalmente, considerámos que esta tese contribui para uma sensibilização relativamente à importância do capital intelectual para melhorar a gestão e performance em contextos educacionais.