New and low cost plastic membrane electrode with low detection limits for sulfadimethoxine determination in aquaculture waters

Sulfadimethoxine (SDM) is one of the drugs, often used in the aquaculture sector to prevent the spread of disease in freshwater fish aquaculture. Its spread through the soil and surface water can contribute to an increase in bacterial resistance. It is therefore important to control this product in the environment. This work proposes a simple and low-cost potentiometric device to monitor the levels of SDM in aquaculture waters, thus avoiding its unnecessary release throughout the environment. The device combines a micropipette tip with a PVC membrane selective to SDM, prepared from an appropriate cocktail, and an inner reference solution. The membrane includes 1% of a porphyrin derivative acting as ionophore and a small amount of a lipophilic cationic additive (corresponding to 0.2% in molar ratio). The composition of the inner solution was optimized with regard to the kind and/or concentration of primary ion, chelating agent and/or a specific interfering charged species, in different concentration ranges. Electrodes constructed with inner reference solutions of 1 × 10−8 mol/L SDM and 1 × 10−4 mol/L chromate ion showed the best analytical features. Near-Nernstian response was obtained with slopes of −54.1 mV/decade, an extraordinary detection limit of 7.5 ng/mL (2.4 × 10−8 mol/L) when compared with other electrodes of the same type. The reproducibility, stability and response time are good and even better than those obtained by liquid contact ISEs. Recovery values of 98.9% were obtained from the analysis of aquaculture water samples.

High-Accuracy Low-Cost RTK-GPS for an Unmanned Surface Vehicle

This work presents a low cost RTK-GPS system for localization of unmanned surface vehicles. The system is based on the use of standard low cost L1 band receivers and in the RTKlib open source software library. Mission scenarios with multiple robotic vehicles are addressed as the ones envisioned in the ICARUS search and rescue case where the possibility of having a moving RTK base on a large USV and multiple smaller vehicles acting as rovers in a local communication network allows for local relative localization with high quality. The approach is validated in operational conditions with results presented for moving base scenario. The system was implemented in the SWIFT USV with the ROAZ autonomous surface vehicle acting as a moving base. This setup allows for the performing of a missions in a wider range of environments and applications such as precise 3D environment modeling in contained areas and multiple robot operations.

A pré-fabricação em betão em edifícios

No presente trabalho apresenta-se um levantamento com base na literatura especializada, das diversas soluções estruturais em betão pré-fabricado existentes, aplicadas em edifícios correntes, mais especificamente as soluções ao nível dos elementos que as constituem, nomeadamente no que respeita a ligações estruturais dos elementos, com combinações in situ, das estruturas préfabricadas e as moldadas em obra, aproveitando o que de melhor se pode obter de ambas as técnicas, com vista a obter um melhor resultado final. Apesar do setor da construção civil estar em crise, tal como vários outros setores, as empresas de pré-fabricação apresentam soluções que poderão contrariar esta tendência, nomeadamente através da diversificação e flexibilização da sua produção, com inovação, criatividade e elevada qualidade. Num mercado em que a construção de edifícios de raiz sofreu um grande abrandamento, começa a surgir no mercado a necessidade de se reabilitar as construções existentes, nomeadamente nos grandes centros das cidades que foram perdendo população ao longo dos tempos. Esta requalificação do espaço urbano permite o desenvolvimento de soluções estruturais pré-fabricadas, no que respeita à reabilitação dos elementos existentes, quer por justaposição para reforço das estruturas, quer por inserção de elementos novos para efetuar correções. Os baixos custos de mão de obra, equipamentos e estaleiro, assim como a redução dos prazos de construção e entrega ao cliente final, dado que a produção não está dependente das condições existentes in situ para se desenvolver, destacam-se da construção civil tradicional. A produção integral dos elementos pré-fabricados de betão em fábrica tem outras vantagens, entre as quais, um melhor planeamento e controle da segurança, um controle rigoroso de qualidade, a redução dos custos de reparação e manutenção, melhor sustentabilidade com redução da quantidade de resíduos produzidos.

Standard commercial education robotic platform: intermediate solution to teaching robotics

Teaching robotics to students at the beginning of their studies has become a huge challenge. Simulation environments can be an effective solution to that challenge where students can interact with simulated robots and have the first contact with robotic constraints. From our previous experience with simulation environments it was possible to observe that students with lower background knowledge in robotics where able to deal with a limited number of constraints, implement a simulated robotic platform and study several sensors. The question is: after this first phase what should be the best approach? Should the student start developing their own hardware? Hardware development is a very important part of an engineer's education but it can also be a difficult phase that could lead to discouragement and loss of motivation in some students. Considering the previous constraints and first year engineering students’ high abandonment rate it is important to develop teaching strategies to deal with this problem in a feasible way. The solution that we propose is the integration of a low-cost standard robotic platform WowWee Rovio as an intermediate solution between the simulation phase and the stage where the students can develop their own robots. This approach will allow the students to keep working in robotic areas such as: cooperative behaviour, perception, navigation and data fusion. The propose approach proved to be a motivation step not only for the students but also for the teachers. Students and teachers were able to reach an agreement between the level of demand imposed by the teachers and satisfaction/motivation of the students.