The development and optimization of a modified single-drop microextraction method for organochlorine pesticides determination by gas chromatography-tandem mass spectrometry

We have developed a new method for single-drop microextraction (SDME) for the preconcentration of organochlorine pesticides (OCP) from complex matrices. It is based on the use of a silicone ring at the tip of the syringe. A 5 μL drop of n-hexane is applied to an aqueous extract containing the OCP and found to be adequate to preconcentrate the OCPs prior to analysis by GC in combination with tandem mass spectrometry. Fourteen OCP were determined using this technique in combination with programmable temperature vaporization. It is shown to have many advantages over traditional split/splitless injection. The effects of kind of organic solvent, exposure time, agitation and organic drop volume were optimized. Relative recoveries range from 59 to 117 %, with repeatabilities of <15 % (coefficient of variation) were achieved. The limits of detection range from 0.002 to 0.150 μg kg−1. The method was applied to the preconcentration of OCPs in fresh strawberry, strawberry jam, and soil.

Projecto secretaria on-line

Nos últimos anos o ISCAP, à semelhança de outras escolas do Ensino Superior, teve um aumento de população na ordem dos 100%. As suas estruturas administrativas, apesar de terem sido reforçadas, não tiveram um aumento na mesma proporção. Perante a incapacidade de resolução do problema a instituição adoptou a solução de informatizar os processos. Numa primeira fase, em 1997, foi implementado um sistema informático para apoio aos serviços administrativos. Apesar deste avanço havia ainda um outro passo a dar: o de melhorar a qualidade do serviço prestado aos estudantes. Em épocas de inscrição em exame ou de renovação de matrícula era necessário esperar horas numa fila para se ser atendido. Por isso, era urgente encontrar soluções que, pelo menos, reduzissem os tempos de espera. Em 1999 deu-se início ao desenvolvimento de um ambicioso projecto que pretendia “levar” a secretaria até aos estudantes e docentes através da Internet. Em Fevereiro de 2000 o serviço arranca com a denominação de “Secretaria On-Line”. Este serviço, no final da sua terceira fase, atingiu todos os objectivos delineados em 1999. A ligação do sistema com a rede de Multibanco, para pagamentos, permitiu eliminar as últimas arestas. Com o objectivo de facilitar o acesso à informação, parte deste serviço (informação de notas e propinas) também passou a estar também disponível através do canal telefone suportado por uma plataforma de atendimento automático. O serviço de mensagens SMS é outro canal de comunicação da escola com a sua comunidade. Posteriormente, a plataforma foi adoptada por outras escolas do IPP estando actualmente a dar suporte à generalidade dos processos académicos e lectivos. No caso da componente financeira da gestão de propinas, é utilizada por todas as escolas do IPP. O presente trabalho foca-se no projecto Secretaria On-Line fazendo uma descrição ao nível funcional, arquitectónico e tecnológico.

eTourism – Mobile Data Interface (Sistema de Apoio On-Line ao Turista em Dispositivos Móveis com Adaptação de Tours Personalizados)

O intuito principal desta Tese é criar um interface de Dados entre uma fonte de informação e fornecimento de Rotas para turistas e disponibilizar essa informação através de um sistema móvel interactivo de navegação e visualização desses mesmos dados. O formato tecnológico será portátil e orientado à mobilidade (PDA) e deverá ser prático, intuitivo e multi-facetado, permitindo boa usabilidade a públicos de várias faixas etárias. Haverá uma componente de IA (Inteligência Artificial), que irá usar a informação fornecida para tomar decisões ponderadas tendo em conta uma diversidade de aspectos. O Sistema a desenvolver deverá ser, assim, capaz de lidar com imponderáveis (alterações de rota, gestão de horários, cancelamento de pontos de visita, novos pontos de visita) e, finalmente, deverá ajudar o turista a gerir o seu tempo entre Pontos de Interesse (POI – Points os Interest). Deverá também permitir seguir ou não um dado percurso pré-definido, havendo possibilidade de cenários de exploração de POIs, sugeridos a partir de sugestões in loco, similares a Locais incluídos no trajecto, que se enquadravam no perfil dos Utilizadores. O âmbito geográfico de teste deste projecto será a zona ribeirinha do porto, por ser um ex-líbris da cidade e, simultaneamente, uma zona com muitos desafios ao nível geográfico (com a inclinação) e ao nível do grande número de Eventos e Locais a visitar.

Square-wave voltametric method for determination of molinate concentration in a biological process using a hanging mercury drop electrode

A square-wave voltammetric (SWV) method using a hanging mercury drop electrode (HMDE) has been developed for determination of the herbicide molinate in a biodegradation process. The method is based on controlled adsorptive accumulation of molinate for 10 s at a potential of -0.8 V versus AgCl/Ag. An anodic peak, due to oxidation of the adsorbed pesticide, was observed in the cyclic voltammogram at ca. -0.320 V versus AgCl/Ag; a very small cathodic peak was also detected. The SWV calibration plot was established to be linear in the range 5.0x10-6 to 9.0x10-6 mol L-1; this corresponded to a detection limit of 3.5x10-8 mol L-1. This electroanalytical method was used to monitor the decrease of molinate concentration in river waters along a biodegradation process using a bacterial mixed culture. The results achieved with this voltammetric method were compared with those obtained by use of a chromatographic method (HPLC–UV) and no significant statistical differences were observed.

Electroanalytical study of the pesticide ethiofencarb

A detailed study of voltammetric behavior of ethiofencarb (ETF) is reported using glassy carbon electrode (GCE) and hanging mercury drop electrode (HMDE). With GCE, it is possible to verify that the oxidative mechanism is irreversible, independent of pH, and the maximum intensity current was observed at +1.20 V vs. AgCl/Ag at pH 1.9. A linear calibration line was obtained from 1.0x10-4 to 8.0x10-4 mol L-1 with SWV method. To complete the electrochemical knowledge of ETF pesticide, the reduction was also explored with HMDE. A well-defined peak was observed at –1.00V vs. AgCl/Ag in a large range of pH with higher signal at pH 7.0. Linearity was obtained in 4.2x10-6 and 9.4x10-6 mol L-1 ETF concentration range. An immediate alkaline hydrolysis of ETF was executed, producing a phenolic compound (2-ethylthiomethylphenol) (EMP), and the electrochemical activity of the product was examined. It was deduced that it is oxidized on GCE at +0.75V vs. AgCl/Ag with a maximum peak intensity current at pH 3.2, but the compound had no reduction activity on HMDE. Using the decrease of potential peak, a flow injection analysis (FIA) system was developed connected to an amperometric detector, enabling the determination of EMP over concentration range of 1.0x10-7 and 1.0x10-5 mol L-1 at a sampling rate of 60 h-1. The results provided by FIA methodology were performed by comparison with results from high-performance liquid chromatography (HPLC) technique and demonstrated good agreement with relative deviations lower than 4%. Recovery trials were performed and the obtained values were between 98 and 104%.

A distributed system for learning programming on-line

Several Web-based on-line judges or on-line programming trainers have been developed in order to allow students to train their programming skills. However, their pedagogical functionalities in the learning of programming have not been clearly defined. EduJudge is a project which aims to integrate the “UVA On-line Judge”, an existing on-line programming trainer with an important number of problems and users, into an effective educational environment consisting of the e-learning platform Moodle and the competitive learning tool QUESTOURnament. The result is the EduJudge system which allows teachers to apply different pedagogical approaches using a proven e-learning platform, makes problems easy to search through an effective search engine, and provides an automated evaluation of the solutions submitted to these problems. The final objective is to provide new learning strategies to motivate students and present programming as an easy and attractive challenge. EduJudge has been tried and tested in three algorithms and programming courses in three different Engineering degrees. The students’ motivation and satisfaction levels were analysed alongside the effects of the EduJudge system on students’ academic outcomes. Results indicate that both students and teachers found that among other multiple benefits the EduJudge system facilitates the learning process. Furthermore, the experi- ment also showed an improvement in students’ academic outcomes. It must be noted that the students’ level of satisfaction did not depend on their computer skills or their gender.

Characterizing the timing behaviour of power-line communication by means of simulation

Although power-line communication (PLC) is not a new technology, its use to support communication with timing requirements is still the focus of ongoing research. Recently, a new infrastructure was presented, intended for communication using power lines from a central location to geographically dispersed nodes using inexpensive devices. This new infrastructure uses a two-level hierarchical power-line system, together with an IP-based network. Within this infrastructure, in order to provide end-toend communication through the two levels of the powerline system, it is necessary to fully understand the behaviour of the underlying network layers. The masterslave behaviour of the PLC MAC, together with the inherent dynamic topology of power-line networks are important issues that must be fully characterised. Therefore, in this paper we present a simulation model which is being used to study and characterise the behaviour of power-line communication.

A power line communication stack for metering, SCADA and large-scale domotic applications

This paper describes the communication stack of the REMPLI system: a structure using power-lines and IPbased networks for communication, for data acquisition and control of energy distribution and consumption. It is furthermore prepared to use alternative communication media like GSM or analog modem connections. The REMPLI system provides communication service for existing applications, namely automated meter reading, energy billing and domotic applications. The communication stack, consisting of physical, network, transport, and application layer is described as well as the communication services provided by the system. We show how the peculiarities of the power-line communication influence the design of the communication stack, by introducing requirements to efficiently use the limited bandwidth, optimize traffic and implement fair use of the communication medium for the extensive communication partners.

Scheduling a cutting and treatment stainless steel sheet line with self-management capabilities

With advancement in computer science and information technology, computing systems are becoming increasingly more complex with an increasing number of heterogeneous components. They are thus becoming more difficult to monitor, manage, and maintain. This process has been well known as labor intensive and error prone. In addition, traditional approaches for system management are difficult to keep up with the rapidly changing environments. There is a need for automatic and efficient approaches to monitor and manage complex computing systems. In this paper, we propose an innovative framework for scheduling system management by combining Autonomic Computing (AC) paradigm, Multi-Agent Systems (MAS) and Nature Inspired Optimization Techniques (NIT). Additionally, we consider the resolution of realistic problems. The scheduling of a Cutting and Treatment Stainless Steel Sheet Line will be evaluated. Results show that proposed approach has advantages when compared with other scheduling systems

On-line self-healing of circuits implemented on reconfigurable FPGAs

To boost logic density and reduce per unit power consumption SRAM-based FPGAs manufacturers adopted nanometric technologies. However, this technology is highly vulnerable to radiation-induced faults, which affect values stored in memory cells, and to manufacturing imperfections. Fault tolerant implementations, based on Triple Modular Redundancy (TMR) infrastructures, help to keep the correct operation of the circuit. However, TMR is not sufficient to guarantee the safe operation of a circuit. Other issues like module placement, the effects of multi- bit upsets (MBU) or fault accumulation, have also to be addressed. In case of a fault occurrence the correct operation of the affected module must be restored and/or the current state of the circuit coherently re-established. A solution that enables the autonomous restoration of the functional definition of the affected module, avoiding fault accumulation, re-establishing the correct circuit state in real-time, while keeping the normal operation of the circuit, is presented in this paper.

On-line defragmentation for run-time partially reconfigurable FPGAs

Dynamically reconfigurable systems have benefited from a new class of FPGAs recently introduced into the market, which allow partial and dynamic reconfiguration at run-time, enabling multiple independent functions from different applications to share the same device, swapping resources as needed. When the sequence of tasks to be performed is not predictable, resource allocation decisions have to be made on-line, fragmenting the FPGA logic space. A rearrangement may be necessary to get enough contiguous space to efficiently implement incoming functions, to avoid spreading their components and, as a result, degrading their performance. This paper presents a novel active replication mechanism for configurable logic blocks (CLBs), able to implement on-line rearrangements, defragmenting the available FPGA resources without disturbing those functions that are currently running.

Experimental assessment of pressure drop in air stripping columns

One important step in the design of air stripping operations for the removal of VOC is the choice of operating conditions, which are based in the phase ratio. This parameter sets on directly the stripping factor and the efficiency of the operation. Its value has an upper limit determined by the flooding regime, which is previewed using empirical correlations, namely the one developed by Eckert. This type of approach is not suitable for the development of algorithms. Using a pilot scale column and a convenient solution, the pressure drop was determined in different operating conditions and the experimental values were compared with the estimations. This particular research will be incorporated in a global model for simulating the dynamics of air stripping using a multi variable distributed parameter system.

A comunicação on-line das ONGs e a angariação de fundos

Dissertação de Mestrado apresentado ao Instituto de Contabilidade e Administração do Porto para a obtenção do grau de Mestre em Marketing Digital, sob orientação da Mestre Inês Veiga Pereira “Esta versão contém as críticas e sugestões dos elementos do júri”

Strategic Drivers for Implementing Sustainability Programs in Portuguese Organizations– Let’s Listen to Aristotle: From Triple to Quadruple Bottom Line

This article describes a study that investigated the main strategic drivers that influence the implementation of sustainability/social responsibility programs. An online survey was administered to managers of Portuguese organizations with certified management systems. The findings suggest that the implementation of such programs is mainly correlated to: 1.) the approach to understanding and working toward the satisfaction of the community’s needs (in the broad sense of social responsibility); 2.) how systematically sustainability within the organization is identified and managed (e.g., pollution prevention, improved environmental performance, and compliance with the applicable environmental laws); and 3.) the degree to which the organization tries to understand the needs of the employees and works toward satisfying them. In addition to the survey, five interviews with top managers of the surveyed organizations provided some useful insights. There was no consensus on the meaning of sustainability and social responsibility: some described it as an instrumental approach for obtaining better organizational results, while others regarded it as the right thing to do (i.e., it is values driven). In all cases, however, the managers supported a kind of umbrella construct under which different size corporations use different models (for example, the Dow Jones Sustainability Index (DJSI), Global Reporting Initiative (GRI), ISO 14001 environmental management systems), although some managers reported that they simply do not know what to do. All of those surveyed agreed that the lack of a systematic approach could represent a major threat to their organization, making them willing to pay more attention and take more action on the issue of sustainability. An additional suggestion made by managers was to change from a triple bottom line (economic dimension, environmental dimension, social equity dimension) to a quadruple bottom line by adding another dimension: personal and family happiness. This fourth dimension was recognized by the Greek philosopher/thinker Aristotle (384-322 BCE) who thought of happiness as the highest good (virtue) and ultimate goal and purpose of life, achieved through living well, in harmony. Such harmony suggests a balance and a lack of excess—in other words a sustainable existence.