Adaptive tackling of the swinging problem for a 2 DOF crane – payload system

The control of a crane carrying its payload by an elastic string corresponds to a task in which precise, indirect control of a subsystem dynamically coupled to a directly controllable subsystem is needed. This task is interesting since the coupled degree of freedom has little damping and it is apt to keep swinging accordingly. The traditional approaches apply the input shaping technology to assist the human operator responsible for the manipulation task. In the present paper a novel adaptive approach applying fixed point transformations based iterations having local basin of attraction is proposed to simultaneously tackle the problems originating from the imprecise dynamic model available for the system to be controlled and the swinging problem, too. The most important phenomenological properties of this approach are also discussed. The control considers the 4th time-derivative of the trajectory of the payload. The operation of the proposed control is illustrated via simulation results.

Desatando os nós da solidão com laços de afeto: Intervenção psicossocial em contexto domiciliário

Apesar de haver diferenças de indivíduo para indivíduo, todas as pessoas se encontram num processo de envelhecimento, que se pretende que seja ativo e saudável. Porém, à medida que nos aproximamos da velhice, e por inúmeros fatores, a probabilidade da pessoa se sentir só, de ter sentimentos como a solidão, de estar isolada ou socialmente excluída, aumenta. Este relatório surge de um projeto desenhado e desenvolvido com pessoas que se sentiam sozinhas, sendo pessoas idosas ou com deficiência, e que, por esse motivo, foram encaminhadas para apoio domiciliário. Pretendeu-se assim colmatar algumas das necessidades quotidianas dessas pessoas, sendo relevante entender se esse apoio contribuiu para melhorar a qualidade de vida, evitar ou diminuir os momentos e sentimentos de solidão, através da (re)ativação de redes de apoio. O projeto “Desatando os nós da solidão com laços de afeto” foi, na medida das suas possibilidades, desenhado e desenvolvido com os participantes. Este projeto ramificou-se em três subprojetos, correspondendo cada um, de forma mais específica, às necessidades e aos problemas que cada pessoa sentia, tentando contribuir para a melhoria da qualidade de vida, recorrendo às potencialidades de cada um e aos recursos existentes na comunidade. É um projeto que terá continuidade, pois envolveu voluntários e técnicos da instituição e pessoas das redes de apoio mais próximas dos participantes, mas que já proporcionou algumas mudanças, sendo esse um ponto de partida para alcançar a utopia orientadora do projeto.

Protein-responsive polymers for point-of-care detection of cardiac biomarker

This work describes a novel use for the polymeric film, poly(o-aminophenol) (PAP) that was made responsive to a specific protein. This was achieved through templated electropolymerization of aminophenol (AP) in the presence of protein. The procedure involved adsorbing protein on the electrode surface and thereafter electroploymerizing the aminophenol. Proteins embedded at the outer surface of the polymeric film were digested by proteinase K and then washed away thereby creating vacant sites. The capacity of the template film to specifically rebind protein was tested with myoglobin (Myo), a cardiac biomarker for ischemia. The films acted as biomimetic artificial antibodies and were produced on a gold (Au) screen printed electrode (SPE), as a step towards disposable sensors to enable point-of-care applications. Raman spectroscopy was used to follow the surface modification of the Au-SPE. The ability of the material to rebind Myo was measured by electrochemical techniques, namely electrochemical impedance spectroscopy (EIS) and square wave voltammetry (SWV). The devices displayed linear responses to Myo in EIS and SWV assays down to 4.0 and 3.5 μg/mL, respectively, with detection limits of 1.5 and 0.8 μg/mL. Good selectivity was observed in the presence of troponin T (TnT) and creatine kinase (CKMB) in SWV assays, and accurate results were obtained in applications to spiked serum. The sensor described in this work is a potential tool for screening Myo in point-of-care due to the simplicity of fabrication, disposability, short time response, low cost, good sensitivity and selectivity.

Novel biosensing device for point-of-care applications with plastic antibodies grown on Au-Screen Printed Electrodes

A gold screen printed electrode (Au-SPE) was modified by merging Molecular Imprinting and Self-Assembly Monolayer techniques for fast screening cardiac biomarkers in point-of-care (POC). For this purpose, Myoglobin (Myo) was selected as target analyte and its plastic antibody imprinted over a glutaraldehyde (Glu)/cysteamine (Cys) layer on the gold-surface. The imprinting effect was produced by growing a reticulated polymer of acrylamide (AAM) and N,N′-methylenebisacrylamide (NNMBA) around the Myo template, covalently attached to the biosensing surface. Electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV) studies were carried out in all chemical modification steps to confirm the surface changes in the Au-SPE. The analytical features of the resulting biosensor were studied by different electrochemical techniques, including EIS, square wave voltammetry (SWV) and potentiometry. The limits of detection ranged from 0.13 to 8 μg/mL. Only potentiometry assays showed limits of detection including the cut-off Myo levels. Quantitative information was also produced for Myo concentrations ≥0.2 μg/mL. The linear response of the biosensing device showed an anionic slope of ~70 mV per decade molar concentration up to 0.3 μg/mL. The interference of coexisting species was tested and good selectivity was observed. The biosensor was successfully applied to biological fluids.