Towards the wide implementation of standards IEC 61968/70 (CIM) and IEC 61850 in the distribution system (CIGRÉ C6-105_2010)

Currently, power systems (PS) already accommodate a substantial penetration of distributed generation (DG) and operate in competitive environments. In the future, as the result of the liberalisation and political regulations, PS will have to deal with large-scale integration of DG and other distributed energy resources (DER), such as storage and provide market agents to ensure a flexible and secure operation. This cannot be done with the traditional PS operational tools used today like the quite restricted information systems Supervisory Control and Data Acquisition (SCADA) [1]. The trend to use the local generation in the active operation of the power system requires new solutions for data management system. The relevant standards have been developed separately in the last few years so there is a need to unify them in order to receive a common and interoperable solution. For the distribution operation the CIM models described in the IEC 61968/70 are especially relevant. In Europe dispersed and renewable energy resources (D&RER) are mostly operated without remote control mechanisms and feed the maximal amount of available power into the grid. To improve the network operation performance the idea of virtual power plants (VPP) will become a reality. In the future power generation of D&RER will be scheduled with a high accuracy. In order to realize VPP decentralized energy management, communication facilities are needed that have standardized interfaces and protocols. IEC 61850 is suitable to serve as a general standard for all communication tasks in power systems [2]. The paper deals with international activities and experiences in the implementation of a new data management and communication concept in the distribution system. The difficulties in the coordination of the inconsistent developed in parallel communication and data management standards - are first addressed in the paper. The upcoming unification work taking into account the growing role of D&RER in the PS is shown. It is possible to overcome the lag in current practical experiences using new tools for creating and maintenance the CIM data and simulation of the IEC 61850 protocol – the prototype of which is presented in the paper –. The origin and the accuracy of the data requirements depend on the data use (e.g. operation or planning) so some remarks concerning the definition of the digital interface incorporated in the merging unit idea from the power utility point of view are presented in the paper too. To summarize some required future work has been identified.

The Past, Polish politics of memory, and stereotyping: an intercultural perspective

The main idea of the article is to consider the interdependence between Politics of Memory (as a type of narrating the Past) and Stereotyping. The author suggests that, in a time of information revolution, we are still constructing images of others on the basis of simplification, overestimation of association between features, and illusory correlations, instead of basing them on knowledge and personal contact. The Politics of Memory, national remembrance, and the historical consciousness play a significant role in these processes, because – as the author argues – they transform historically based 'symbolic analogies' into 'illusory correlations' between national identity and the behavior of its members. To support his theoretical investigation, the author presents results of his draft experiment and two case studies: (a) a social construction of images of neighbors based on Polish narrations about the Past; and (b) various processes of stereotyping based on the Remembrance of the Holocaust. All these considerations lead him to state that the Politics of Memory should be recognized as an influential source of commonly shared stereotypes on other cultures and nations.

Auto-regulação na gestão de conflitos em retalho

Mestrado em Engenharia Informática

Overcoming the objectification of western classical music with the concept of music as a process

Dissertation to obtain the degree of Master in Music - Artistic Interpretation

Fixed point transformations in the adaptive control of fractional-order MIMO systems

Though the formal mathematical idea of introducing noninteger order derivatives can be traced from the 17th century in a letter by L’Hospital in which he asked Leibniz what the meaning of D n y if n = 1/2 would be in 1695 [1], it was better outlined only in the 19th century [2, 3, 4]. Due to the lack of clear physical interpretation their first applications in physics appeared only later, in the 20th century, in connection with visco-elastic phenomena [5, 6]. The topic later obtained quite general attention [7, 8, 9], and also found new applications in material science [10], analysis of earth-quake signals [11], control of robots [12], and in the description of diffusion [13], etc.

Market of resources for virtual enterprise integration

Most definitions of virtual enterprise (VE) incorporate the idea of extended and collaborative outsourcing to suppliers and subcontractors in order to achieve a competitive response to market demands (Webster, Sugden, & Tayles, 2004). As suggested by several authors (Browne & Zhang, 1999; Byrne, 1993; Camarinha-Matos & Afsarmanesh, 1999; Cunha, Putnik, & Ávila, 2000; Davidow & Malone, 1992; Preiss, Goldman, & Nagel, 1996), a VE consists of a network of independent enterprises (resources providers) with reconfiguration capability in useful time, permanently aligned with the market requirements, created to take profit from a specific market opportunity, and where each participant contributes with its best practices and core competencies to the success and competitiveness of the structure as a whole. Even during the operation phase of the VE, the configuration can change, to assure business alignment with the market demands, traduced by the identification of reconfiguration opportunities and continuous readjustment or reconfiguration of the VE network, to meet unexpected situations or to keep permanent competitiveness and maximum performance (Cunha & Putnik, 2002, 2005a, 2005b).

Sistema didáctico de baixo custo com FPGA de alta densidade

O uso das Field-Programmable Gate Array tem crescido de forma exponencial. Com isto dito, é importante que os engenheiros electrotécnicos estejam familiarizados com este tipo de tecnologia. Foi com o intuído de passar estas valências para os alunos do ISEP, que surgiu a ideia de criar um sistema didáctico, que permitisse ao alunos aprender a trabalhar com estes dispositivos. O seguinte trabalho iniciou-se com base num estudo das características destes dispositivos e das suas potencialidades, seguido de uma avaliação do que o mercado tem para oferecer. Posteriormente, com base em toda a informação reunida, foi definida a arquitectura do sistema, que levou selecção de dispositivos a incluir no mesmo, e culminando na concepção do esquema eléctrico do sistema e da placa de circuito impresso correspondente ao protótipo do mesmo. As principais directivas para este projecto foram o uso de uma FPGA de alta densidade e a concepção da ferramenta com o custo de projecto o mais reduzido possível.

A importância das consultoras no processo de internacionalização das micro, pequenas e médias empresas em Portugal

Relatório de Estágio Apresentado ao Instituto de Contabilidade e Administração do Porto para a obtenção do grau de Mestre em Empreendedorismo e Internacionalização, sob orientação da Mestre Inês Veiga Pereira

O papel das organizações no crescimento, desenvolvimento e inovação do empreendedorismo em CaboVerde

A sociedade cabo-verdiana defronta-se hoje com diversos desafios à sua capacidade de assegurar um crescimento sustentável e garantir o bem-estar da população. Neste sentido, o empreendedorismo desempenha um papel crucial para o desenvolvimento do país que vem contribuindo ao longo dos anos com o aumento de inúmeros postos de trabalho. A opção pela realização de um Estágio Curricular, em detrimento das opções de realização de Dissertação ou Projeto, deveu-se ao facto de considerar esta opção como uma oportunidade de colocar em prática tudo o que aprendeu ao longo destes anos e por considerar ser um complemento importante à minha Formação Académica. O Estágio desenrolou-se na Empresa BIC – Business Incubation Center, e teve uma duração de 600 horas (aproximadamente 3 meses). A Empresa labora essencialmente na área do Empreendedorismo através de Elaboração de Planos de Negócios e Capacidade de Gestão. O objetivo deste relatório passa por transmitir uma ideia da forma como se vive o empreendedorismo em Cabo Verde e reportar o importante papel que diversas instituições têm vindo a ter na implementação do empreendedorismo em parcerias com universidades através da transformação de ideias em negócios de sucesso. Os principais resultados obtidos deste processo de estágio, estão relacionados com o contacto diário com empreendedores de várias áreas de negócio e estar sempre rodeado de pessoas qualificadas levando a que o estagiário tenha adquirido muitas competências, maturidade, experiência e responsabilidade.