Experimental study on polyester based concretes filled with glass fibre reinforced plastic recyclates – a contribution to composite materials sustainability

The development and applications of thermoset polymeric composites, namely fibre reinforced plastics (FRP), have shifted in the last decades more and more into the mass market [1]. Despite of all advantages associated to FRP based products, the increasing production and consume also lead to an increasing amount of FRP wastes, either end-of-lifecycle products, or scrap and by-products generated by the manufacturing process itself. Whereas thermoplastic FRPs can be easily recycled, by remelting and remoulding, recyclability of thermosetting FRPs constitutes a more difficult task due to cross-linked nature of resin matrix. To date, most of the thermoset based FRP waste is being incinerated or landfilled, leading to negative environmental impacts and supplementary added costs to FRP producers and suppliers. This actual framework is putting increasing pressure on the industry to address the options available for FRP waste management, being an important driver for applied research undertaken cost efficient recycling methods. [1-2]. In spite of this, research on recycling solutions for thermoset composites is still at an elementary stage. Thermal and/or chemical recycling processes, with partial fibre recovering, have been investigated mostly for carbon fibre reinforced plastics (CFRP) due to inherent value of carbon fibre reinforcement; whereas for glass fibre reinforced plastics (GFRP), mechanical recycling, by means of milling and grinding processes, has been considered a more viable recycling method [1-2]. Though, at the moment, few solutions in the reuse of mechanically-recycled GFRP composites into valueadded products are being explored. Aiming filling this gap, in this study, a new waste management solution for thermoset GFRP based products was assessed. The mechanical recycling approach, with reduction of GFRP waste to powdered and fibrous materials was applied, and the potential added value of obtained recyclates was experimentally investigated as raw material for polyester based mortars. The use of a cementless concrete as host material for GFRP recyclates, instead of a conventional Portland cement based concrete, presents an important asset in avoiding the eventual incompatibility problems arisen from alkalis silica reaction between glass fibres and cementious binder matrix. Additionally, due to hermetic nature of resin binder, polymer based concretes present greater ability for incorporating recycled waste products [3]. Under this scope, different GFRP waste admixed polymer mortar (PM) formulations were analyzed varying the size grading and content of GFRP powder and fibre mix waste. Added value of potential recycling solution was assessed by means of flexural and compressive loading capacities of modified mortars with regard to waste-free polymer mortars.

GreenFix®: avaliação da morfologia em tecido mamário

Na última década têm desenvolvido fixadores para substituição do formol que é tóxico para o homem. O principal objectivo foi avaliar microscopicamente a histomorfologia e as características tintoriais de tecido mamário fixado em GreenFix®, durante 24 e 72 horas, comparativamente ao fixado em formol, através da coloração de Hematoxilina-Eosina. Uma análise global da histomorfologia revelou existir uma diferença estatisticamente significativa entre a fixação pelo GreenFix® e pelo formol (p=0,050), tendo-se registado uma melhoria da coloração e detalhe nuclear nos tecidos fixados com GreenFix® durante 24 (p=0,007) ou 72 horas(p=0,024). O GreenFix® é um potencial substituto do formol na rotina histológica.

Estudo da influência das condições de armazenamento nas propriedades e composição do biodiesel

O objectivo deste trabalho era a determinação da influência das condições de armazenamento do biodiesel nas suas propriedades e composição. Para isso foi produzido biodiesel a partir de óleo alimentar usado e armazenado em diferentes condições. O biodiesel foi colocado em frascos de vidro e dividido em três grupos diferentes de temperatura. O primeiro foi colocado a uma temperatura de 6ºC (frigorifico) com frascos fechados e expostos ao ar e água. O segundo grupo foi colocado a uma temperatura de 40ºC (banho termostático) com frascos fechados, abertos ao ar e abertos ao ar e água. O terceiro e ultimo grupo foi colocado à temperatura ambiente (18,6ando de seguida uma tendência decrescente. O aumento inicial corresponde à formação de hidroperóxidos, já o declínio provavelmente corresponderá à sua degradação e formação de compostos como aldeídos. Os aldeídos por sua vez oxidam e dão origem a ácidos, justificando assim o aumento do índice de acidez. Este índice pode aumentar também devido à hidrólise dos ésteres causada pela presença de água, dando origem a álcoois e ácidos. Em contrapartida para as amostras armazenadas a temperaturas mais baixas os parâmetros mantiveram-se praticamente constantes ao longo do tempo. O índice de iodo não permitiu concluir claramente que houve uma diminuição nas ligações duplas como seria espectável. Ao analisar os cromatogramas obtidos na determinação dos ésteres das amostras armazenadas em contacto com ar e água, a 40ºC verifica-se a formação de ácidos gordos a partir dos 81 dias de armazenamento. Com os resultados obtidos verificou-se que para as amostras colocadas a 40ºC e em contacto com ar e água a taxa de oxidação é mais acelerada, fazendo com que o biodiesel perca as características e propriedades iniciais, já no caso das amostras armazenadas a 6ºC e em frascos fechados verifica-se que os parâmetros estudados praticamente não sofrem alterações, mantendo quase inalteradas as propriedades e composição do biodiesel ao fim das 16 semanas de estudo. Assim é possível concluir que para se conseguir manter as características e propriedades do biodiesel durante um armazenamento prolongado é necessário garantir um ambiente fresco de preferência inerte e depósitos completamentos secos, de forma a evitar as condições que provocam oxidação.

Sequencing cutting patterns with colored interval graphs

The problem addressed here originates in the industry of flat glass cutting and wood panel sawing, where smaller items are cut from larger items accordingly to predefined cutting patterns. In this type of industry the smaller pieces that are cut from the patterns are piled around the machine in stacks according to the size of the pieces, which are moved to the warehouse only when all items of the same size have been cut. If the cutting machine can process only one pattern at a time, and the workspace is limited, it is desirable to set the sequence in which the cutting patterns are processed in a way to minimize the maximum number of open stacks around the machine. This problem is known in literature as the minimization of open stacks (MOSP). To find the best sequence of the cutting patterns, we propose an integer programming model, based on interval graphs, that searches for an appropriate edge completion of the given graph of the problem, while defining a suitable coloring of its vertices.

Drilling delamination outcomes on glass and sisal reinforced plastics

Nowadays, fibre reinforced plastics are used in a wide variety of applications. Apart from the most known reinforcement fibres, like glass or carbon, natural fibres can be seen as an economical alternative. However, some mistrust is yet limiting the use of such materials, being one of the main reasons the inconsistency normally found in their mechanical properties. It should be noticed that these materials are more used for their low density than for their high stiffness. In this work, two different types of reinforced plates were compared: glass reinforced epoxy plate and sisal reinforced epoxy plate. For material characterization purposes, tensile and flexural tests were carried out. Main properties of both materials, like elastic modulus, tensile strength or flexural modulus, are presented and compared with reference values. Afterwards, plates were drilled under two different feed rates: low and high, with two diverse tools: twist and brad type drill, while cutting speed was kept constant. Thrust forces during drilling were monitored. Then, delamination area around the hole was assessed by using digital images that were processed using a computational platform previously developed. Finally, drilled plates were mechanically tested for bearing and open-hole resistance. Results were compared and correlated with the measured delamination. Conclusions contribute to the understanding of natural fibres reinforced plastics as a substitute to glass fibres reinforced plastics, helping on cost reductions without compromising reliability, as well as the consequence of delamination on mechanical resistance of this type of composites.