Concepção e implementação de um website de uma associação sindical

Dissertação apresentada ao Instituto Superior de Contabilidade para a obtenção do Grau de Mestre em Assessoria de Administração

Eastwards / westwards: which direction for gender studies in the 21st century?

Eastwards / Westwards: Which Direction for Gender Studies in the XXIst Century? is a collection of essays which focus on themes and methods that characterize current research into gender in Asian countries in general. In this collection, ideas derived from Gender Studies elsewhere in the world have been subjected to scrutiny for their utility in helping to describe and understand regional phenomena. But the concepts of Local and Global – with their discoursive productions – have not functioned as a binary opposition: localism and globalism are mutually constitutive and researchers have interrogated those spaces of interaction between the ‘self’ and the ‘other’, bearing in mind their own embeddedness in social and cultural structures and their own historical memory. Contributors to this collection provided a critical transnational perspective on some of the complex effects of the dynamics of cultural globalization, by exploring the relation between gender and development, language, historiography, education and culture. We have also given attention to the ideological and rhetorical processes through which gender identity is constructed, by comparing textual grids and patterns of expectation. Likewise, we have discussed the role of ethnography, anthropology, historiography, sociology, fiction, popular culture and colonial and post-colonial sources in (re)inventing old/new male/female identities, their conversion into concepts and circulation through time and space. This multicultural and trans-disciplinary selection of essays is totally written in English, fully edited and revised, therefore, it has a good potential for an immediate international circulation. This project may trace new paths and issues for discussion on what concerns the life, practices and narratives by and about women in Asia, as well as elsewhere in the present day global experience. Academic readership: Researchers, scholars, educators, graduate and post-graduate students, doctoral students and general non-fiction readers, with a special interest in Gender Studies, Asia, Colonial and Post-Colonial Literature, Anthropology, Cultural Studies, History, Historiography, Politics, Race, Feminism, Language, Linguistics, Power, Political and Feminist Agendas, Popular Culture, Education, Women’s Writing, Religion, Multiculturalism, Globalisation, Migration. Chapter summary: 1. “Social Gender Stereotypes and their Implication in Hindi”, Anjali Pande, Jawaharlal Nehru University, New Delhi, India. This essay looks at the subtle ways in which gender identities are constructed and reinforced in India through social norms of language use. Language itself becomes a medium for perpetuating gender stereotypes, forcing its speakers to confirm to socially defined gender roles. Using examples from a classroom discussion about a film, this essay will highlight the underlying rigid male-female stereotypes in Indian society with their more obvious expressions in language. For the urban woman in India globalisation meant increased economic equality and exposure to changed lifestyles. On an individual level it also meant redefining gender relations and changing the hierarchy in man-­woman relationships. With the economic independence there is a heightened sense of liberation in all spheres of social life, a confidence to fuzz the rigid boundaries of gender roles. With the new films and media celebrating this liberated woman, who is ready to assert her sexual needs, who is ready to explode those long held notions of morality, one would expect that the changes are not just superficial. But as it soon became obvious in the course of a classroom discussion about relationships and stereotypes related to age, the surface changes can not become part of the common vocabulary, for the obvious reason that there is still a vast gap between the screen image of this new woman and the ground reality. Social considerations define the limits of this assertiveness of women, whereas men are happy to be liberal within the larger frame of social sanctions. The educated urban woman in India speaks in favour of change and the educated urban male supports her, but one just needs to scratch the surface to see the time tested formulae of gender roles firmly in place. The way the urban woman happily balances this emerging promise of independence with her gendered social identity, makes it necessary to rethink some aspects of looking at gender in a gradually changing, traditional society like India. 2. “The Linguistic Dimension of Gender Equality”, Alissa Tolstokorova, Kiev Centre for Gender Information and Education, Ukraine. The subject-matter of this essay is gender justice in language which, as I argue, may be achieved through the development of a gender-related approach to linguistic human rights. The last decades of the 20th century, globally marked by a “gender shift” in attitudes to language policy, gave impetus to the social movement for promoting linguistic gender equality. It was initiated in Western Europe and nowadays is moving eastwards, as ideas of gender democracy progress into developing countries. But, while in western societies gender discrimination through language, or linguistic sexism, was an issue of concern for over three decades, in developing countries efforts to promote gender justice in language are only in their infancy. My argument is that to promote gender justice in language internationally it is necessary to acknowledge the rights of women and men to equal representation of their gender in language and speech and, therefore, raise a question of linguistic rights of the sexes. My understanding is that the adoption of the Universal Declaration of Linguistic Rights in 1996 provided this opportunity to address the problem of gender justice in language as a human rights issue, specifically as a gender dimension of linguistic human rights. 3. “The Rebirth of an Old Language: Issues of Gender Equality in Kazakhstan”, Maria Helena Guimarães, Polytechnic Institute of Porto, Portugal. The existing language situation in Kazakhstan, while peaceful, is not without some tension. We propose to analyze here some questions we consider relevant in the frame of cultural globalization and gender equality, such as: free from Russian imperialism, could Kazakhstan become an easy prey of Turkey’s “imperialist dream”? Could these traditionally Muslim people be soon facing the end of religious tolerance and gender equality, becoming this new old language an easy instrument for the infiltration in the country of fundamentalism (it has already crossed the boarders of Uzbekistan), leading to a gradual deterioration of its rich multicultural relations? The present structure of the language is still very fragile: there are three main dialects and many academics defend the re-introduction of the Latin alphabet, thus enlarging the possibility of cultural “contamination” by making the transmission of fundamentalist ideas still easier through neighbour countries like Azerbaijan, Uzbekistan and Turkmenistan (their languages belong to the same sub-group of Common Turkic), where the Latin alphabet is already in use, and where the ground for such ideas shown itself very fruitful. 4. “Construction of Womanhood in the Bengali Language of Bangladesh”, Raasheed Mahmood; University of New South Wales, Sydney. The present essay attempts to explore the role of gender-based language differences and of certain markers that reveal the status accorded to women in Bangladesh. Discrimination against women, in its various forms, is endemic in communities and countries around the world, cutting across class, race, age, and religious and national boundaries. One cannot understand the problems of gender discrimination solely by referring to the relationship of power or authority between men and women. Rather one needs to consider the problem by relating it to the specific social formation in which the image of masculinity and femininity is constructed and reconstructed. Following such line of reasoning this essay will examine the nature of gender bias in the Bengali language of Bangladesh, holding the conviction that as a product of social reality language reflects the socio-cultural behaviour of the community who speaks it. This essay will also attempt to shed some light on the processes through which gender based language differences produce actual consequences for women, who become exposed to low self-esteem, depression and systematic exclusion from public discourse. 5. “Marriage in China as an expression of a changing society”, Elisabetta Rosado David, University of Porto, Portugal, and Università Ca’Foscari, Venezia, Italy. In 29 April 2001, the new Marriage Law was promulgated in China. The first law on marriage was proclaimed in 1950 with the objective of freeing women from the feudal matrimonial system. With the second law, in 1981, values and conditions that had been distorted by the Cultural Revolution were recovered. Twenty years later, a new reform was started, intending to update marriage in the view of the social and cultural changes that occurred with Deng Xiaoping’s “open policy”. But the legal reform is only the starting point for this case-study. The rituals that are followed in the wedding ceremony are often hard to understand and very difficult to standardize, especially because China is a vast country, densely populated and characterized by several ethnic minorities. Two key words emerge from this issue: syncretism and continuity. On this basis, we can understand tradition in a better way, and analyse whether or not marriage, as every social manifestation, has evolved in harmony with Chinese culture. 6. “The Other Woman in the Portuguese Colonial Empire: The Case of Portuguese India”, Maria de Deus Manso, University of Évora, Portugal. This essay researches the social, cultural and symbolic history of local women in the Portuguese Indian colonial enclaves. The normative Portuguese overseas history has not paid any attention to the “indigenous” female populations in colonial Portuguese territories, albeit the large social importance of these social segments largely used in matrimonial and even catholic missionary strategies. The first attempt to open fresh windows in the history of this new field was the publication of Charles Boxer’s referential study about Women in lberian Overseas Expansion, edited in Portugal only after the Revolution of 1975. After this research we can only quote some other fragmentary efforts. In fact, research about the social, cultural, religious, political and symbolic situation of women in the Portuguese colonial territories, from the XVI to the XX century, is still a minor historiographic field. In this essay we discuss this problem and we study colonial representations of women in the Portuguese Indian enclaves, mainly in the territory of Goa, using case studies methodologies. 7. “Heading East this Time: Critical Readings on Gender in Southeast Asia”, Clara Sarmento, Polytechnic Institute of Porto, Portugal. This essay intends to discuss some critical readings of fictional and theoretical texts on gender condition in Southeast Asian countries. Nowadays, many texts about women in Southeast Asia apply concepts of power in unusual areas. Traditional forms of gender hegemony have been replaced by other powerful, if somewhat more covert, forms. We will discuss some universal values concerning conventional female roles as well as the strategies used to recognize women in political fields traditionally characterized by male dominance. Female empowerment will mean different things at different times in history, as a result of culture, local geography and individual circumstances. Empowerment needs to be perceived as an individual attitude, but it also has to be facilitated at the macro­level by society and the State. Gender is very much at the heart of all these dynamics, strongly related to specificities of historical, cultural, ethnic and class situatedness, requiring an interdisciplinary transnational approach.

Construção de um robô trepador com locomoção através de rodas e adesão através de meios magnéticos

Mestrado em Engenharia Electrotécnica e de Computadores

Avaliação da integridade estrutural de uma prótese cimentada por emissão acústica

Mestrado em Engenharia Electrotécnica e de Computadores

Structural, physical, and chemical modifications induced by microwave heating on native agar-like galactans

Native agars from Gracilaria vermiculophylla produced in sustainable aquaculture systems (IMTA) were extracted under conventional (TWE) and microwave (MAE) heating. The optimal extracts from both processes were compared in terms of their properties. The agars’ structure was further investigated through Fourier transform infrared and NMR spectroscopy. Both samples showed a regular structure with an identical backbone, β-D-galactose (G) and 3,6-anhydro-α-L-galactose (LA) units; a considerable degree of methylation was found at C6 of the G units and, to a lesser extent, at C2 of the LA residues. The methylation degree in the G units was lower for MAEopt agar; the sulfate content was also reduced. MAE led to higher agar recoveries with drastic extraction time and solvent volume reductions. Two times lower values of [η] and Mv obtained for the MAEopt sample indicate substantial depolymerization of the polysaccharide backbone; this was reflected in its gelling properties; yet it was clearly appropriate for commercial application in soft-texture food products.

Medição automática do diâmetro da aorta torácica em imagens de tomografia computorizada

O calibre da artéria aorta torácica é avaliado em situações de suspeita de patologia ou em pacientes com pre-disposição para desenvolverem doenças vasculares. A medição das suas dimensões, em duas direcções diametralmente opostas e, assim, fulcral na avaliação desta estrutura. Para tal, o exame de primeira linha definido é a Angiografia por Tomografia Computorizada (Angio-TC), injectando-se um produto de contraste na veia radial que irá opacificar os vasos, permitindo a sua distinção das estruturas adjacentes. O presente trabalho, inserido na disciplina de Dissertação/ Projecto/ Estágio Profissional do Mestrado em Engenharia de Computação e Instrumentação Médica e com a cooperação da empresa Efficientia, foi sugerido pela equipa de Angio-TC do Centro Hospitalar de Vila Nova de Gaia (CHVNG) e tem por objectivo o desenvolvimento de uma aplicação para a medição e registo automático do diâmetro da aorta torácica em nove pontos anatómicos pre-definidos em imagens de Tomografia Computorizada (TC). A aplicação foi desenvolvida no ambiente integrado de processamento e análise de imagem, Fiji, sendo a metodologia composta pelas etapas de segmentação, desenho da linha central, determinação dos planos de cortes, segmentação e medição da aorta nos planos de corte. Os resultados obtidos pela metodologia proposta são concordantes com os obtidos por especialistas para o conjunto de teste utilizado neste trabalho.

Sistema de treino para pilotos de parapente

Mestrado em Engenharia Electrotécnica – Sistemas Eléctricos de Energia

Uncertainty assessment approach for composite structures based on global sensitivity indices

The problem of uncertainty propagation in composite laminate structures is studied. An approach based on the optimal design of composite structures to achieve a target reliability level is proposed. Using the Uniform Design Method (UDM), a set of design points is generated over a design domain centred at mean values of random variables, aimed at studying the space variability. The most critical Tsai number, the structural reliability index and the sensitivities are obtained for each UDM design point, using the maximum load obtained from optimal design search. Using the UDM design points as input/output patterns, an Artificial Neural Network (ANN) is developed based on supervised evolutionary learning. Finally, using the developed ANN a Monte Carlo simulation procedure is implemented and the variability of the structural response based on global sensitivity analysis (GSA) is studied. The GSA is based on the first order Sobol indices and relative sensitivities. An appropriate GSA algorithm aiming to obtain Sobol indices is proposed. The most important sources of uncertainty are identified.

Uncertainty analysis based on sensitivity applied to angle-ply composite structures

This article describes a finite element-based formulation for the statistical analysis of the response of stochastic structural composite systems whose material properties are described by random fields. A first-order technique is used to obtain the second-order statistics for the structural response considering means and variances of the displacement and stress fields of plate or shell composite structures. Propagation of uncertainties depends on sensitivities taken as measurement of variation effects. The adjoint variable method is used to obtain the sensitivity matrix. This method is appropriated for composite structures due to the large number of random input parameters. Dominant effects on the stochastic characteristics are studied analyzing the influence of different random parameters. In particular, a study of the anisotropy influence on uncertainties propagation of angle-ply composites is carried out based on the proposed approach.

From local to global importance measures of uncertainty propagation in composite structures

The influence of uncertainties of input parameters on output response of composite structures is investigated in this paper. In particular, the effects of deviations in mechanical properties, ply angles, ply thickness and on applied loads are studied. The uncertainty propagation and the importance measure of input parameters are analysed using three different approaches: a first-order local method, a Global Sensitivity Analysis (GSA) supported by a variance-based method and an extension of local variance to estimate the global variance over the domain of inputs. Sample results are shown for a shell composite laminated structure built with different composite systems including multi-materials. The importance measures of input parameters on structural response based on numerical results are established and discussed as a function of the anisotropy of composite materials. Needs for global variance methods are discussed by comparing the results obtained from different proposed methodologies. The objective of this paper is to contribute for the use of GSA techniques together with low expensive local importance measures.

Uncertainty propagation in inverse reliability-based design of composite structures

An approach for the analysis of uncertainty propagation in reliability-based design optimization of composite laminate structures is presented. Using the Uniform Design Method (UDM), a set of design points is generated over a domain centered on the mean reference values of the random variables. A methodology based on inverse optimal design of composite structures to achieve a specified reliability level is proposed, and the corresponding maximum load is outlined as a function of ply angle. Using the generated UDM design points as input/output patterns, an Artificial Neural Network (ANN) is developed based on an evolutionary learning process. Then, a Monte Carlo simulation using ANN development is performed to simulate the behavior of the critical Tsai number, structural reliability index, and their relative sensitivities as a function of the ply angle of laminates. The results are generated for uniformly distributed random variables on a domain centered on mean values. The statistical analysis of the results enables the study of the variability of the reliability index and its sensitivity relative to the ply angle. Numerical examples showing the utility of the approach for robust design of angle-ply laminates are presented.

Operational modal monitoring of ancient structures using wireless technology

Operational Modal Analysis is currently applied in structural dynamic monitoring studies using conventional wired based sensors and data acquisition platforms. This approach, however, becomes inadequate in cases where the tests are performed in ancient structures with esthetic concerns or in others, where the use of wires greatly impacts the monitoring system cost and creates difficulties in the maintenance and deployment of data acquisition platforms. In these cases, the use of sensor platforms based on wireless and MEMS would clearly benefit these applications. This work presents a first attempt to apply this wireless technology to the structural monitoring of historical masonry constructions in the context of operational modal analysis. Commercial WSN platforms were used to study one laboratory specimen and one of the structural elements of a XV century building in Portugal. Results showed that in comparison to the conventional wired sensors, wireless platforms have poor performance in respect to the acceleration time series recorded and the detection of modal shapes. However, for frequency detection issues, reliable results were obtained, especially when random excitation was used as noise source.

Effect of plug-filling, Testing velocity and temperature on the tensile strength of strap repairs on aluminium structures

In this work, an experimental study was performed on the influence of plug-filling, loading rate and temperature on the tensile strength of single-strap (SS) and double-strap (DS) repairs on aluminium structures. Whilst the main purpose of this work was to evaluate the feasibility of plug-filling for the strength improvement of these repairs, a parallel study was carried out to assess the sensitivity of the adhesive to external features that can affect the repairs performance, such as the rate of loading and environmental temperature. The experimental programme included repairs with different values of overlap length (L O = 10, 20 and 30 mm), and with and without plug-filling, whose results were interpreted in light of experimental evidence of the fracture modes and typical stress distributions for bonded repairs. The influence of the testing speed on the repairs strength was also addressed (considering 0.5, 5 and 25 mm/min). Accounting for the temperature effects, tests were carried out at room temperature (≈23°C), 50 and 80°C. This permitted a comparative evaluation of the adhesive tested below and above the glass transition temperature (T g), established by the manufacturer as 67°C. The combined influence of these two parameters on the repairs strength was also analysed. According to the results obtained from this work, design guidelines for repairing aluminium structures were

Comparative analysis of drills for composite laminates

The characteristics of carbon fiber-reinforced plastics allow a very broad range of uses. Drilling is often necessary to assemble different components, but this can lead to various forms of damage, such as delamination which is the most severe. However, a reduced thrust force can decrease the risk of delamination. In this work, two variables of the drilling process were compared: tool material and geometry, as well as the effect of feed rate and cutting speed. The parameters that were analyzed include: thrust force, delamination extension and mechanical strength through open-hole tensile test, bearing test, and flexural test on drilled plates. The present work shows that a proper combination of all the factors involved in drilling operations, like tool material, tool geometry and cutting parameters, such as feed rate or cutting speed, can lead to the reduction of delamination damage and, consequently, to the enhancement of the mechanical properties of laminated parts in complex structures, evaluated by open-hole, bearing, or flexural tests.

Optimization study of hybrid spot-welded/bonded single-lap joints

Joining of components with structural adhesives is currently one of the most widespread techniques for advanced structures (e.g., aerospace or aeronautical). Adhesive bonding does not involve drilling operations and it distributes the load over a larger area than mechanical joints. However, peak stresses tend to develop near the overlap edges because of differential straining of the adherends and load asymmetry. As a result, premature failures can be expected, especially for brittle adhesives. Moreover, bonded joints are very sensitive to the surface treatment of the material, service temperature, humidity and ageing. To surpass these limitations, the combination of adhesive bonding with spot-welding is a choice to be considered, adding a few advantages like superior static strength and stiffness, higher peeling and fatigue strength and easier fabrication, as fixtures during the adhesive curing are not needed. The experimental and numerical study presented here evaluates hybrid spot-welded/bonded single-lap joints in comparison with the purely spot-welded and bonded equivalents. A parametric study on the overlap length (LO) allowed achieving different strength advantages, up to 58% compared to spot-welded joints and 24% over bonded joints. The Finite Element Method (FEM) and Cohesive Zone Models (CZM) for damage growth were also tested in Abaqus® to evaluate this technique for strength prediction, showing accurate estimations for all kinds of joints.