Avaliação da posição ortostática em plataforma de forças de dois indivíduos com acidente vascular encefálico antes e após uma intervenção baseado no conceito Bobath

Introdução: O acidente vascular encefálico (AVE) é uma importante e frequente condição de saúde que se repercute na funcionalidade do indivíduo. No sentido de reabilitar a função perdida, é comum o recurso a intervenções de fisioterapia baseado o conceito de Bobath. Como tal, importa verificar, as modificações no âmbito do controlo postural, através da migração do centro de pressão na base de suporte, face à aplicação de uma intervenção segundo abordagem baseada no conceito de Bobath em dois indivíduos com AVE. Métodos e participantes: Foram recrutados dois indivíduos com diagnóstico de AVE num hospital da zona do grande Porto. Dados referentes ao equilíbrio estático na condição de medição “olhos abertos ou fechados” e “calçado ou descalço” foram obtidos através de plataforma de forças, antes e após uma intervenção baseado no conceito de Bobath durante 13 semanas (M0 e M1). Nestes dois momentos foram ainda avaliados a mobilidade, função cognitiva, participação, equilíbrio através do teste Timed Up & Go (TUG) e Timed Up & Go Modificado (TUGM), e das escalas Mini Mental State Examination (MMSE), Postural Assessment for Stroke Scale (PASS), Escala de Berg (EB) e Índice de Barthel Modificado (IBM). Resultados: Os participantes obtiveram em ambos os momentos pontuação máxima no MMSE. Ambos os indivíduos atingiram o valor máximo no IBM em M1 (Mo: A: 78; B: 65). Ambos os indivíduos aumentaram o score entre M0 e M1, relativamente ao PASS (A: M0:21; M1:33; B: M0: 26; M1:34) e EB (A: M0:48; M1:54; B: M0: 30; M1:50). O tempo de realização do TUG e do TUGM diminuíram entre momentos em ambos os indivíduos (respectivamente: A: 15''13'' a 13''27''; B: 24''13'' a 13''88'' e A: 19''08''' a 13''27''; B: 29''60''' a 17''64'''). A área de deslocação do centro de pressão (CP) variou entre momentos em todas as condições de avaliação, sendo menor na condição “olhos abertos e descalço” em ambos os participantes (“olhos abertos e calçado”: A: M0= 1,364, M1=2,796; B: M0=1,892, M1=2,979; “olhos abertos e descalço”: A: M0= 0,758, M1=0,727; B: M0=3,064, M1=1,952; “olhos fechados e calçado”: A: M0= 2,360, M1=2,998; B: M0=2,232, M1= 4,392; “olhos fechados e descalço”: A: M0= 1,347, M1=2,388; B: M0=1,652, M1= 1,016). O desvio padrão das deslocações anteroposteriores variou entre momentos, sendo tendencialmente maior em M1 e na condição “descalço e olhos abertos”(“olhos abertos e calçado”: A: M0= 0,201, M1=0,500; B: M0=0,252, M1=0,310; “olhos abertos e descalço”: A: M0= 0,118, M1=0,165; B: M0=0,282, M1=0,276; “olhos fechados e calçado”: A: M0= 0,308, M1=0,398; B: M0=0,274, M1= 0,471; “olhos fechados e descalço”: A: M0= 0,158 , M1=0,373; B: M0=0,230, M1= 0,172), o desvio padrão das deslocações médio-lateral seguem a mesma tendência (“olhos abertos e calçado”: A: M0= 0,370 , M1=0,473; B: M0=0,454, M1=0,517; “olhos abertos e descalço”: A: M0= 0,354, M1=0,236 ; B: M0=0,584, M1=0,381; “olhos fechados e calçado”: A: M0= 0,425, M1=0,463; B: M0=0,462, M1= 0,583; “olhos fechados e descalço”: A: M0= 0,475, M1=0,416; B: M0=0,389, M1= 0,342). A velocidade de oscilação na direcção antero – posterior variou entre momentos, sendo tendencialmente menor em M1, em ambos os participantes e em todas as condições de avaliação: “olhos abertos e calçado”: A: M0= 0,886 , M1=0,532; B: M0=2,507, M1=01,072; “olhos abertos e descalço”: A: M0= 2,562, M1=3,815 ; B: M0=4,367, M1=0,262; “olhos fechados e calçado”: A: M0= 2,689, M1=1,757; B: M0=2,821, M1= 0,769; “olhos fechados e descalço”: A: M0= 2,984, M1=2,525; B: M0=4,100, M1= 0,265), a velocidade de oscilação na direcção médio – lateral seguem a mesma tendência para as condições de “olhos abertos e calçado”: A: M0= 6,524 , M1=6,218; B: M0=0,467, M1=0,404; “olhos fechados e calçado”: A: M0= 6,387, M1=1,927; B: M0=0,351, M1= 0,505; mas a velocidade de oscilação aumenta para as condições de “olhos abertos e descalço”: A: M0= 3,108, M1=7,806 ; B: M0=1,150, M1=8,054; “olhos fechados e descalço”: A: M0= 3,444, M1=3,839; B: M0=1,434, M1= 7,891). Conclusão: Entre os dois momentos os indivíduos melhoraram a sua mobilidade, equilíbrio, participação e actividades, potencialmente devido à intervenção baseado no conceito de Bobath.

Custo histórico versus justo valor

Oriêntador: Mestre Carlos Pedro

Controllability results for impulsive mixed type functional integro-differential evolution equations with nonlocal conditions

In this paper, we establish the controllability for a class of abstract impulsive mixed-type functional integro-differential equations with finite delay in a Banach space. Some sufficient conditions for controllability are obtained by using the Mönch fixed point theorem via measures of noncompactness and semigroup theory. Particularly, we do not assume the compactness of the evolution system. An example is given to illustrate the effectiveness of our results.

The influence of the boundary conditions on low-velocity impact composite damage

The objective of this work was to study the influence of the boundary conditions on low-velocity impact behaviour of carbon-epoxy composite plates. Experimental work and numerical analysis were performed on [04,904]s laminates. The influence of different boundary conditions on the impacted plates was analysed considering rectangular and square plates. The X-radiography was used as a non-destructive technique to evaluate the internal damage caused by impact loading. A three-dimensional numerical analysis was also performed considering progressive damage modelling. The model includes three-dimensional solid elements and interface finite elements including a cohesive mixed-mode damage model, which allows simulating delamination between different oriented layers. It was verified that plate’s boundary conditions have influence on the delaminated area. Good agreement between experimental and numerical analysis for shape, orientation and size of the delamination was obtained.

Evaluation of tools and cutting conditions on carbon fibre reinforced laminates

The distinctive characteristics of carbon fibre reinforced plastics, like low weight or high specific strength, had broadened their use to new fields. Due to the need of assembly to structures, machining operations like drilling are frequent. In result of composites inhomogeneity, this operation can lead to different damages that reduce mechanical strength of the parts in the connection area. From these damages, delamination is the most severe. A proper choice of tool and cutting parameters can reduce delamination substantially. In this work the results obtained with five different tool geometries are compared. Conclusions show that the choice of an adequate drill can reduce thrust forces, thus delamination damage.

Numerical solution of a PDE system with non-linear steady state conditions that translates the air stripping pollutants removal

This work deals with the numerical simulation of air stripping process for the pre-treatment of groundwater used in human consumption. The model established in steady state presents an exponential solution that is used, together with the Tau Method, to get a spectral approach of the solution of the system of partial differential equations associated to the model in transient state.

Spectral solution for the air stripping pollutants removal dynamic model with non linear steady state conditions

This work deals with the numerical simulation of air stripping process for the pre-treatment of groundwater used in human consumption. The model established in steady state presents an exponential solution that is used, together with the Tau Method, to get a spectral approach of the solution of the system of partial differential equations associated to the model in transient state.

Impact of the Meteorology Conditions on the Particulate Matter Dispersion from an Industrial Complex into Urban and Suburban Areas

The aim of this work was to assess the influence of meteorological conditions on the dispersion of particulate matter from an industrial zone into urban and suburban areas. The particulate matter concentration was related to the most important meteorological variables such as wind direction, velocity and frequency. A coal-fired power plant was considered to be the main emission source with two stacks of 225 m height. A middle point between the two stacks was taken as the centre of two concentric circles with 6 and 20 km radius delimiting the sampling area. About 40 sampling collectors were placed within this area. Meteorological data was obtained from a portable meteorological station placed at approximately 1.7 km to SE from the stacks. Additional data was obtained from the electrical company that runs the coal power plant. These data covers the years from 2006 to the present. A detailed statistical analysis was performed to identify the most frequent meteorological conditions concerning mainly wind speed and direction. This analysis revealed that the most frequent wind blows from Northwest and North and the strongest winds blow from Northwest. Particulate matter deposition was obtained in two sampling campaigns carried out in summer and in spring. For the first campaign the monthly average flux deposition was 1.90 g/m2 and for the second campaign this value was 0.79 g/m2. Wind dispersion occurred predominantly from North to South, away from the nearest residential area, located at about 6 km to Northwest from the stacks. Nevertheless, the higher deposition fluxes occurred in the NW/N and NE/E quadrants. This study was conducted considering only the contribution of particulate matter from coal combustion, however, others sources may be present as well, such as road traffic. Additional chemical analyses and microanalysis are needed to identify the source linkage to flux deposition levels.

Optimization of HS-SPME analytical conditions using factorial design for trihalomethanes determination in swimming pool water samples

Trihalomethanes (THMs) are widely referred and studied as disinfection by-products (DBPs). The THMs that are most commonly detected are chloroform (TCM), bromodichloromethane (BDCM), chlorodibromomethane (CDBM), and bromoform (TBM). Several studies regarding the determination of THMs in swimming pool water and air samples have been published. This paper reviews the most recent work in this field, with a special focus on water and air sampling, sample preparation and analytical determination methods. An experimental study has been developed in order to optimize the headspace solid-phasemicroextraction (HS-SPME) conditions of TCM, BDCM, CDBM and TBM from water samples using a 23 factorial design. An extraction temperature of 45 °C, for 25min, and a desorption time of 5 min were found to be the best conditions. Analysis was performed by gas chromatography with an electron capture detector (GC-ECD). The method was successfully applied to a set of 27 swimming pool water samples collected in the Oporto area (Portugal). TCM was the only THM detected with levels between 4.5 and 406.5 μg L−1. Four of the samples exceeded the guideline value for total THMs in swimming pool water (100 μgL−1) indicated by the Portuguese Health Authority.

Multi-elemental analysis of ready-to-eat “baby leaf” vegetables using microwave digestion and high-resolution continuum source atomic absorption spectrometry

The mineral content (phosphorous (P), potassium (K), sodium (Na), calcium (Ca), magnesium (Mg), iron (Fe), manganese (Mn), zinc (Zn) and copper (Cu)) of eight ready-to-eat baby leaf vegetables was determined. The samples were subjected to microwave-assisted digestion and the minerals were quantified by High-Resolution Continuum Source Atomic Absorption Spectrometry (HR-CS-AAS) with flame and electrothermal atomisation. The methods were optimised and validated producing low LOQs, good repeatability and linearity, and recoveries, ranging from 91% to 110% for the minerals analysed. Phosphorous was determined by a standard colorimetric method. The accuracy of the method was checked by analysing a certified reference material; results were in agreement with the quantified value. The samples had a high content of potassium and calcium, but the principal mineral was iron. The mineral content was stable during storage and baby leaf vegetables could represent a good source of minerals in a balanced diet. A linear discriminant analysis was performed to compare the mineral profile obtained and showed, as expected, that the mineral content was similar between samples from the same family. The Linear Discriminant Analysis was able to discriminate different samples based on their mineral profile.

Siderophore Production by Bacillus megaterium: Effect of Growth Phase and Cultural Conditions

Siderophore production by Bacillus megaterium was detected, in an iron-deficient culture medium, during the exponential growth phase, prior to the sporulation, in the presence of glucose; these results suggested that the onset of siderophore production did not require glucose depletion and was not related with the sporulation. The siderophore production by B. megaterium was affected by the carbon source used. The growth on glycerol promoted the very high siderophore production (1,182 μmol g−1 dry weight biomass); the opposite effect was observed in the presence of mannose (251 μmol g−1 dry weight biomass). The growth in the presence of fructose, galactose, glucose, lactose, maltose or sucrose, originated similar concentrations of siderophore (546–842 μmol g−1 dry weight biomass). Aeration had a positive effect on the production of siderophore. Incubation of B. megaterium under static conditions delayed and reduced the growth and the production of siderophore, compared with the incubation in stirred conditions.

A physical packing sequence algorithm for the container loading problem with static mechanical equilibrium conditions

The container loading problem (CLP) is a combinatorial optimization problem for the spatial arrangement of cargo inside containers so as to maximize the usage of space. The algorithms for this problem are of limited practical applicability if real-world constraints are not considered, one of the most important of which is deemed to be stability. This paper addresses static stability, as opposed to dynamic stability, looking at the stability of the cargo during container loading. This paper proposes two algorithms. The first is a static stability algorithm based on static mechanical equilibrium conditions that can be used as a stability evaluation function embedded in CLP algorithms (e.g. constructive heuristics, metaheuristics). The second proposed algorithm is a physical packing sequence algorithm that, given a container loading arrangement, generates the actual sequence by which each box is placed inside the container, considering static stability and loading operation efficiency constraints.

Numerical analysis of the initial conditions in fractional systems

Fractional dynamics is a growing topic in theoretical and experimental scientific research. A classical problem is the initialization required by fractional operators. While the problem is clear from the mathematical point of view, it constitutes a challenge in applied sciences. This paper addresses the problem of initialization and its effect upon dynamical system simulation when adopting numerical approximations. The results are compatible with system dynamics and clarify the formulation of adequate values for the initial conditions in numerical simulations.

Teor mineral e capacidade antioxidante em chás e infusões

Mestrado em Engenharia Química – Ramo Optimização Energética na Indústria Química