Using remote labs in education: two little ducks in remote experimentation

A book about remote labs and engineering education begs to begin with the question, “Why do engineering programs include lab work?” Although this may seem like a given and not worth discussing, whenever we’re faced with innovative ideas, it’s important to “put everything on the table” in order to reassess its value to our program or goals. What is it about lab work that is of value to students? Are there elements of traditional labs that we could let go of? Are there elements that we don’t want to lose? These questions can help us to clarify how and why labs are integrated into an engineering education program.

Adapting remote labs to learning scenarios: case studies using VISIR and RemotElectLab

Remote laboratories are an emergent technological and pedagogical tool at all education levels, and their widespread use is an important part of their own improvement and evolution. This paper describes several issues encountered on laboratorial classes, on higher education courses, when using remote laboratories based on PXI systems, either using the VISIR system or an alternate in-house solution. Three main issues are presented and explained, all reported by teachers, that gave support to students' use of remote laboratories. The first issue deals with the need to allow students to select the actual place where an ammeter is to be inserted on electric circuits, even incorrectly, therefore emulating real-world difficulties. The second one deals with problems with timing when several measurements are required at short intervals, as in the discharge cycle of a capacitor. In addition, the last issue deals with the use of a multimeter in dc mode when reading ac values, a use that collides with the lab settings. All scenarios are presented and discussed, including the solution found for each case. The conclusion derived from the described work is that the remote laboratories area is an expanding field, where practical use leads to improvement and evolution of the available solutions, requiring a strict cooperation and information-sharing between all actors, i.e., developers, teachers, and students.

IX International conference on Remote Engineering and Virtual instrumentation REV 2012

THE ninth edition of the International Conference on Remote Engineering and Virtual Instrumentation (REV) [1] was held at the Faculty of Engineering of the University of Deusto, Bilbao (Spain), from the 4th to the 6th of July, 2012. A world-class research community in the subject of remote and virtual laboratories joined the event.

A mobile robot platform for open learning based on serious games and remote laboratories

Within the pedagogical community, Serious Games have arisen as a viable alternative to traditional course-based learning materials. Until now, they have been based strictly on software solutions. Meanwhile, research into Remote Laboratories has shown that they are a viable, low-cost solution for experimentation in an engineering context, providing uninterrupted access, low-maintenance requirements, and a heightened sense of reality when compared to simulations. This paper will propose a solution where both approaches are combined to deliver a Remote Laboratory-based Serious Game for use in engineering and school education. The platform for this system is the WebLab-Deusto Framework, already well-tested within the remote laboratory context, and based on open standards. The laboratory allows users to control a mobile robot in a labyrinth environment and take part in an interactive game where they must locate and correctly answer several questions, the subject of which can be adapted to educators' needs. It also integrates the Google Blockly graphical programming language, allowing students to learn basic programming and logic principles without needing to understand complex syntax.

Using remote labs to serve different teacher's needs a case study with VISIR and RemotElectLab

Remote Laboratories are an emergent technological and pedagogical tool at all education levels, and their widespread use is an important part of their own improvement and evolution. This paper describes several issues encountered on laboratorial classes, on higher education courses, when using remote laboratories based on PXI systems, either using the VISIR system or an alternate in-house solution. Three main issues are presented and explained, all reported by teachers that gave support to students use of remote laboratories. The first issue deals with the need to allow students to select the actual place where an ammeter is to be inserted on electric circuits, even incorrectly, therefore emulating real world difficulties. The second one deals with problems with timing when several measurements are required at short intervals, as in the discharge cycle of a capacitor. And the last issue deals with the use of a multimeter in DC mode when reading AC values, a use that collides with the lab settings. All scenarios are presented and discussed including the solution found for each case. The conclusion derived from the described work is that the remote laboratories area is an expanding field, where practical use leads to improvement and evolution of the available solutions, requiring a strict cooperation and information sharing between all actors, i.e. developers, teachers and students.

VISIR deployment in undergraduate engineering practices

Practical sessions are the backbone of qualification in engineering education. It leads to a better understanding and allows mastering scientific concepts and theories. The lack of the availability of practical sessions at many universities and institutions owing to the cost and the unavailability of instructors the most of the time caused a significant decline in experimentation in engineering education over the last decades. Recently, with the progress of computer-based learning, remote laboratories have been proven to be the best alternative to the traditional ones, regarding to its low cost and ubiquity. Some universities have already started to deploy remote labs in their practical sessions. This contribution compiles diverse experiences based on the deployment of the remote laboratory, Virtual Instrument Systems in Reality (VISIR), on the practices of undergraduate engineering grades at various universities within the VISIR community. It aims to show the impact of its usage on engineering education concerning the assessments of students and teachers as well.

Addressing software impact in the design of remote laboratories

Remote Laboratories or WebLabs constitute a first-order didactic resource in engineering faculties. However, in many cases, they lack a proper software design, both in the client and server side, which degrades their quality and academic usefulness. This paper presents the main characteristics of a Remote Laboratory, analyzes the software technologies to implement the client and server sides in a WebLab, and correlates these technologies with the characteristics to facilitate the selection of a technology to implement a WebLab. The results obtained suggest the adoption of a Service Oriented Laboratory Architecture-based approach for the design of future Remote Laboratories so that client-agnostic Remote Laboratories and Remote Laboratory composition are enabled. The experience with the real Remote Laboratory, WebLab-Deusto, is also presented.

VISIR: experiences and challenges

It is of crucial importance the integration of practical sessions in engineering curricula owing to their significant role in understanding engineering concepts and scientific phenomena. However, the lack of practical sessions due to the high costs of the equipment and the unavailability of instructors has caused a significant declination in experimentation in engineering education. Remote laboratories have tackled this issues providing online reusable and shared workbenches unconstrained by neither geographical nor time considerations. Thereby, they have extremely proliferated among universities and integrated into engineering curricula over the last decade. This contribution compiles diverse experiences based on the deployment of the remote laboratory, Virtual Instrument Systems in Reality (VISIR), on the practices of undergraduate engineering grades at various universities within the VISIR community. It aims to show the impact of its usage on engineering education concerning the assessments of students and teachers as well. In addition, the paper address the next challenges and future works carried out at several universities within the VISIR community.

Academic effectiveness of VISIR remote lab in analog electronics

The effectiveness of VISIR is compared to other experimentation activities under the point of view presented by the professor Soysal in 2000. Advantages and limitations are discussed in terms of equipment availability, infrastructure cost, and contribution to various elements of experimental learning.

Institutional factors governing the deployment of remote experiments: lessons from the rexnet project

Remote labs offer many unique advantages to students as they provide opportunities to access experiments and learning scenarios that would be otherwise unavailable. At the same time, however, these opportunities introduce real challenges to the institutions hosting the remote labs. This paper draws on the experiences of the REXNET project consortium to expose a number of these issues as a means of furthering the debate on the value of remote labs and the best practices in deploying them. The paper presents a brief outline of the various types of remote lab scenarios that might be deployed. It then describes the key human and technological actors that have an interest in or are intrinsic to a remote lab instance, with a description of the role of each actor and their interest. Some relationships between these various actors are then discussed with some factors that might influence those relationships. Finally some general issues are briefly described.

Web marketing: desenvolvimento de uma presença online para uma unidade hoteleira – Projeto Oporto Invictus Hostel

O hotel, para muitos autores, tem como função oferecer abrigo para quem está distante da sua casa e atender às suas necessidades básicas. A hotelaria tem como função básica alojar as pessoas que estão longe da sua residência e que precisam de um quarto com uma cama para dormir e uma casa de banho (Duarte, 1996). Para Beni (2003), um hotel, além de ter a função básica de alojar, tem uma característica que nenhum outro estabelecimento comercial possui, que é o facto de o consumidor se deslocar até ao hotel para poder utilizar os serviços disponíveis. Outra característica muito especifica da atividade hoteleira, é o facto de o atendimento ser o mais importante na hora da prestação do serviço. O Hostel é uma designação muito usada atualmente como sinónimo de albergue. É um tipo de unidade hoteleira que se caracteriza pelos preços convidativos e pela possibilidade de socialização dos hóspedes, onde cada hóspede pode arrendar uma cama ou beliche, num dormitório partilhado, com casa de banho, lavandaria e, por vezes, cozinha, também em regime partilhado. Os Hostels são geralmente económicos praticando preços intitulados low-­‐cost. Definir uma estratégia para a Internet é hoje um imperativo para qualquer organização que pretenda utilizar este canal de comunicação para promover a sua atividade. As unidades hoteleiras também não são exceção; a necessidade de comunicar com os públicos alvo no sentido de aumentarem a captação de turistas exige uma presença na Internet que consiga simultaneamente informar e motivar à escolha pelos serviços prestados. A Internet evidencia um incontornável potencial informativo e comunicativo em questões de rapidez de circulação: número de pessoas que atinge e áreas geográficas que abarca; e devido às suas características de imaterialidade, instantaneidade e multimédia, democratiza o acesso à informação e a determinados tipos de bens, facilita a comunicação entre pessoas e instituições e universaliza as oportunidades, eliminando as barreiras espaciais, geográficas e temporais (Balsa, 2007). Rapidamente as unidades hoteleiras se aperceberam das vantagens e potencialidades da Internet: rápida, imediata, económica, integrada no dia-­‐a-­‐dia de trabalho e lazer e acessível a um cada vez maior número de pessoas. A nível geral, mas com especial incidência no caso das unidades hoteleiras, a Internet apresenta inúmeras vantagens ao nível da estruturação da informação em bases de dados e da sua apresentação dinâmica, tirando partido da inclusão de objetos multimédia em páginas HTML. Os objetos multimédia podem incluir áudio, vídeo,animações em tecnologia Flash e mesmo animações 3D tornando a visita a um sítio Web com este tipo de conteúdos, uma experiência muito gratificante. Por sua vez, a interatividade, característica do próprio funcionamento das páginas Web, facilita a interação entre a unidade hoteleira e o visitante. A interatividade permite ou facilita uma relação ativa entre o utilizador e o hotel. O utilizador passa de espectador passivo a interveniente ativo no processo de consulta da informação. Na web, os avanços tecnológicos têm sido constantes. Em 1980, Alvin Toffler’s no seu bestseller ‘The Third Wave’ previu um novo tipo de consumidor a quem chamou de ‘prosumer’ e que seria um misto de DIY (do-­it-­yourself) produtor e consumidor em mercados offline (Toffler, 1980). Foi sem dúvida de uma grande visão, mas sem os recentes avanços na web e nas tecnologias digitais, a maioria dos utilizadores não poderia ter dado o salto de espectador passivo para ator que participa ativamente na construção da web (Shuen, 2008). O aparecimento das redes sociais que permitem criar comunidades com interesses afins, o desenvolvimento de plataformas como o Youtube.com para a partilha de vídeos, a vulgarização de plataformas como o flickr.com para a partilha de imagens constituíram marcos determinantes para aquilo a que se designa por WEB 2.0 (tecnologia do século XXI). Enquanto no tempo da WEB 1.0 (tecnologia dos anos 90) os sites eram essencialmente estáticos e a interatividade não era levada aos limites, agora com a WEB 2.0 é possível construir modelos de negócio com conteúdos mais ricos simulando, com muito maior realismo, em ambientes virtuais, o que se passa em ambientes reais. Os sítios Web das unidades hoteleiras estão a evoluir rapidamente para um modelo que contemple as potencialidades da WEB 2.0 Tendo em consideração a importância das unidades hoteleiras no panorama do turismo, a relevância da Internet como meio de comunicação entre as instituições e os cidadãos e a necessidade das unidades hoteleiras disporem de uma estratégia de comunicação digital para difundir as suas valências e atividades, entendemos justificar-­se fazer uma revisão da literatura onde: procuraremos compreender a importância do turismo na sociedade atual assim como, o impacto das novas tecnologias da informação em atividades relacionadas com o turismo e ainda, procuraremos perceber quais os canais de comunicação digital que estão ao dispor dos profissionais de turismo, nomeadamente os gestores de unidades hoteleiras, para promover os seus serviços. O objetivo principal deste trabalho consiste em mostrar como foi desenvolvido uma estratégia de comunicação digital para promover online uma unidade hoteleira low cost, no caso presente o Oporto Invictus Hostel. Trata­‐se de um projeto integrado em que não só se criaram as diferentes peças de comunicação como se definiu e aplicou uma estratégia promocional com vista à divulgação do Hostel. O projeto apresentado evidencia como é possível, com recursos limitados, criar um sistema integrado de comunicação digital online que promova uma pequena unidade hoteleira, de forma a dar-­‐lhe visibilidade tanto a nível nacional como internacional. O projeto está dividido em cinco partes. Numa primeira parte é feita a apresentação do briefing que resultou de uma primeira reunião com o cliente. Numa segunda parte apresenta­‐se a fase de planeamento relativa ao desenvolvimento do projeto. Numa terceira parte descreve-­se o processo de implementação do projeto. Na quarta fase abordam-se os testes funcionais e na quinta e última fase faz-­se referencia a aspetos relacionados com a conclusão do projeto.

DEWI - Wirelessly into the Future

Euromicro Conference on Digital System Design (DSD2015), EPDSD - 3rd European Projects in Digital System Design, Funchal, Portugal.