Geostatistical Mapping of Outfall Plume Dispersion Data gathered with an autonomous underwater vehicle

The main purpose of this study was to examine the applicability of geostatistical modeling to obtain valuable information for assessing the environmental impact of sewage outfall discharges. The data set used was obtained in a monitoring campaign to S. Jacinto outfall, located off the Portuguese west coast near Aveiro region, using an AUV. The Matheron’s classical estimator was used the compute the experimental semivariogram which was fitted to three theoretical models: spherical, exponential and gaussian. The cross-validation procedure suggested the best semivariogram model and ordinary kriging was used to obtain the predictions of salinity at unknown locations. The generated map shows clearly the plume dispersion in the studied area, indicating that the effluent does not reach the near by beaches. Our study suggests that an optimal design for the AUV sampling trajectory from a geostatistical prediction point of view, can help to compute more precise predictions and hence to quantify more accurately dilution. Moreover, since accurate measurements of plume’s dilution are rare, these studies might be very helpful in the future for validation of dispersion models.

Modelo de previsão meteorológica baseado em sistemas de inferência difusa

Mestrado em Engenharia Electrotécnica e de Computadores

Efeitos tridimensionais no escoamento em torno de cilindros confinados

Mestrado em Engenharia Química

Processamento de imagem para determinação de distribuições granulométricas de gotas numa suspensão

Mestrado em Engenharia Electrotécnica e de Computadores

Previsão de vento baseado em técnicas de Data Mining

Mestrado em Engenharia Electrotécnica – Sistemas Eléctricos de Energia

Sistema de recomendação e personalização de televisão

Com a expansão da Televisão Digital e a convergência entre os meios de difusão convencionais e a televisão sobre IP, o número de canais disponíveis tem aumentado de forma gradual colocando o espectador numa situação de difícil escolha quanto ao programa a visionar. Sobrecarregados com uma grande quantidade de programas e informação associada, muitos espectadores desistem sistematicamente de ver um programa e tendem a efectuar zapping entre diversos canais ou a assistir sempre aos mesmos programas ou canais. Diante deste problema de sobrecarga de informação, os sistemas de recomendação apresentam-se como uma solução. Nesta tese pretende estudar-se algumas das soluções existentes dos sistemas de recomendação de televisão e desenvolver uma aplicação que permita a recomendação de um conjunto de programas que representem potencial interesse ao espectador. São abordados os principais conceitos da área dos algoritmos de recomendação e apresentados alguns dos sistemas de recomendação de programas de televisão desenvolvidos até à data. Para realizar as recomendações foram desenvolvidos dois algoritmos baseados respectivamente em técnicas de filtragem colaborativa e de filtragem de conteúdo. Estes algoritmos permitem através do cálculo da similaridade entre itens ou utilizadores realizar a predição da classificação que um utilizador atribuiria a um determinado item (programa de televisão, filme, etc.). Desta forma é possível avaliar o nível de potencial interesse que o utilizador terá em relação ao respectivo item. Os conjuntos de dados que descrevem as características dos programas (título, género, actores, etc.) são armazenados de acordo com a norma TV-Anytime. Esta norma de descrição de conteúdo multimédia apresenta a vantagem de ser especificamente vocacionada para conteúdo audiovisual e está disponível livremente. O conjunto de recomendações obtidas é apresentado ao utilizador através da interacção com uma aplicação Web que permite a integração de todos os componentes do sistema. Para validação do trabalho foi considerado um dataset de teste designado de htrec2011-movielens-2k e cujo conteúdo corresponde a um conjunto de filmes classificados por diversos utilizadores num ambiente real. Este conjunto de filmes possui, para além da classificações atribuídas pelos utilizadores, um conjunto de dados que descrevem o género, directores, realizadores e país de origem. Para validação final do trabalho foram realizados diversos testes dos quais o mais relevante correspondeu à avaliação da distância entre predições e valores reais e cujo objectivo é classificar a capacidade dos algoritmos desenvolvidos preverem com precisão as classificações que os utilizadores atribuiriam aos itens analisados.

The periodic table: contest and exhibition

The systemization and organization of ideas and concepts is an integral part of science. In chemistry, the organization of the periodic table of the chemical elements in the 1860s was one of the greatest scientific breakthroughs ever made and in fact during the 20th century it became a universally recognized scientific icon (1). The periodic table is the fundamental classificatory scheme of the elements and summarizes the realm of chemistry (2). Simply knowing the position of an element in the periodic table tells us about its properties and is usually enough to predict how the element will behave in a wide variety of different situations or reactions (1). Based on this potential mine of information, it is possible to make reliable predictions of the properties of the compounds that each element forms. Nowadays, the concept of the periodic table is starting to interact with other sciences and reports of periodic tables of amino acids (3), genetic codes (4), protein structures (5), and biology (6) can be found in the specialized literature. Symbiosis between science and art, for example, “The Periodic Table of The Elephants” (7), can also be seen. To appeal to a better understanding of the periodic table, the Instituto Superior de Engenharia do Instituto Politécnico do Porto and the Centro de Química da Universidade do Porto promoted a contest and exhibit with the goal of stimulating a wide and heterogeneous audience, ranging from young children and their parents to graduate students from several disciplines, to explore the nature of this icon. Imaginative educational activities such as contests (8–10), games (11, 12), and puzzles (13–15) provided a way to communicate with the general public with the goal of attracting students to science. This also constituted an interesting, informative, and entertaining alternative to non-interactive lectures. Simultaneously, artistic creativity was combined with scientific knowledge.

Study of optical and structural properties of Cu2ZnSnS4 thin films

Cu2ZnSnS4 is a promising semiconductor to be used as absorber in thin film solar cells. In this work, we investigated optical and structural properties of Cu2ZnSnS4 thin films grown by sulphurization of metallic precursors deposited on soda lime glass substrates. The crystalline phases were studied by X-ray diffraction measurements showing the presence of only the Cu2ZnSnS4 phase. The studied films were copper poor and zinc rich as shown by inductively coupled plasma mass spectroscopy. Scanning electron microscopy revealed a good crystallinity and compactness. An absorption coefficient varying between 3 and 4×104cm−1 was measured in the energy range between 1.75 and 3.5 eV. The band gap energy was estimated in 1.51 eV. Photoluminescence spectroscopy showed an asymmetric broad band emission. The dependence of this emission on the excitation power and temperature was investigated and compared to the predictions of the donor-acceptor-type transitions and radiative recombinations in the model of potential fluctuations. Experimental evidence was found to ascribe the observed emission to radiative transitions involving tail states created by potential fluctuations.

Modelling adhesive joints with cohesive zone models: effect of the cohesive law shape of the adhesive layer

Adhesively-bonded joints are extensively used in several fields of engineering. Cohesive Zone Models (CZM) have been used for the strength prediction of adhesive joints, as an add-in to Finite Element (FE) analyses that allows simulation of damage growth, by consideration of energetic principles. A useful feature of CZM is that different shapes can be developed for the cohesive laws, depending on the nature of the material or interface to be simulated, allowing an accurate strength prediction. This work studies the influence of the CZM shape (triangular, exponential or trapezoidal) used to model a thin adhesive layer in single-lap adhesive joints, for an estimation of its influence on the strength prediction under different material conditions. By performing this study, guidelines are provided on the possibility to use a CZM shape that may not be the most suited for a particular adhesive, but that may be more straightforward to use/implement and have less convergence problems (e.g. triangular shaped CZM), thus attaining the solution faster. The overall results showed that joints bonded with ductile adhesives are highly influenced by the CZM shape, and that the trapezoidal shape fits best the experimental data. Moreover, the smaller is the overlap length (LO), the greater is the influence of the CZM shape. On the other hand, the influence of the CZM shape can be neglected when using brittle adhesives, without compromising too much the accuracy of the strength predictions.

Influence of the cohesive law parameters on the strength prediction of adhesively-bonded joints

Adhesive joints are largely employed nowadays as a fast and effective joining process. The respective techniques for strength prediction have also improved over the years. Cohesive Zone Models (CZM’s) coupled to Finite Element Method (FEM) analyses surpass the limitations of stress and fracture criteria and allow modelling damage. CZM’s require the energy release rates in tension (Gn) and shear (Gs) and respective fracture energies in tension (Gnc) and shear (Gsc). Additionally, the cohesive strengths (tn0 for tension and ts0 for shear) must also be defined. In this work, the influence of the CZM parameters of a triangular CZM used to model a thin adhesive layer is studied, to estimate their effect on the predictions. Some conclusions were drawn for the accuracy of the simulation results by variations of each one of these parameters.

Using a cohesive damage model to predict the tensile behaviour of CFRP single-strap repairs

This work addresses both experimental and numerical analyses regarding the tensile behaviour of CFRP single-strap repairs. Two fundamental geometrical parameters were studied: overlap length and patch thickness. The numerical model used ABAQUS® software and a developed cohesive mixed-mode damage model adequate for ductile adhesives, and implemented within interface finite elements. Stress analyses and strength predictions were carried out. Experimental and numerical comparisons were performed on failure modes, failure load and equivalent stiffness of the repair. Good correlation was found between experimental and numerical results, showing that the proposed model can be successfully applied to bonded joints or repairs.

Buckling strength of adhesively-bonded single and double-strap repairs on carbon-epoxy structures

This work reports on an experimental and finite element method (FEM) parametric study of adhesively-bonded single and double-strap repairs on carbon-epoxy structures under buckling unrestrained compression. The influence of the overlap length and patch thickness was evaluated. This loading gains a particular significance from the additional characteristic mechanisms of structures under compression, such as fibres microbuckling, for buckling restrained structures, or global buckling of the assembly, if no transverse restriction exists. The FEM analysis is based on the use of cohesive elements including mixed-mode criteria to simulate a cohesive fracture of the adhesive layer. Trapezoidal laws in pure modes I and II were used to account for the ductility of most structural adhesives. These laws were estimated for the adhesive used from double cantilever beam (DCB) and end-notched flexure (ENF) tests, respectively, using an inverse technique. The pure mode III cohesive law was equalled to the pure mode II one. Compression failure in the laminates was predicted using a stress-based criterion. The accurate FEM predictions open a good prospect for the reduction of the extensive experimentation in the design of carbon-epoxy repairs. Design principles were also established for these repairs under buckling.

Support System for Rational Use of Electric Energy

This paper presents the system developed to promote the rational use of electric energy among consumers and, thus, increase the energy efficiency. The goal is to provide energy consumers with an application that displays the energy consumption/production profiles, sets up consuming ceilings, defines automatic alerts and alarms, compares anonymously consumers with identical energy usage profiles by region and predicts, in the case of non-residential installations, the expected consumption/production values. The resulting distributed system is organized in two main blocks: front-end and back-end. The front-end includes user interface applications for Android mobile devices and Web browsers. The back-end provides data storage and processing functionalities and is installed in a cloud computing platform - the Google App Engine - which provides a standard Web service interface. This option ensures interoperability, scalability and robustness to the system.

Effect of temperature on the shear strength of aluminium single lap bonded joints for high temperature applications

An experimental and numerical investigation into the shear strength behaviour of adhesive single lap joints (SLJs) was carried out in order to understand the effect of temperature on the joint strength. The adherend material used for the experimental tests was an aluminium alloy in the form of thin sheets, and the adhesive used was a high-strength high temperature epoxy. Tensile tests as a function of temperature were performed and numerical predictions based on the use of a bilinear cohesive damage model were obtained. It is shown that at temperatures below Tg, the lap shear strength of SLJs increased, while at temperatures above Tg, a drastic drop in the lap shear strength was observed. Comparison between the experimental and numerical maximum loads representing the strength of the joints shows a reasonably good agreement.

The use of the boundary element method in the analysis of single lap joints

The most common techniques for stress analysis/strength prediction of adhesive joints involve analytical or numerical methods such as the Finite Element Method (FEM). However, the Boundary Element Method (BEM) is an alternative numerical technique that has been successfully applied for the solution of a wide variety of engineering problems. This work evaluates the applicability of the boundary elem ent code BEASY as a design tool to analyze adhesive joints. The linearity of peak shear and peel stresses with the applied displacement is studied and compared between BEASY and the analytical model of Frostig et al., considering a bonded single-lap joint under tensile loading. The BEM results are also compared with FEM in terms of stress distributions. To evaluate the mesh convergence of BEASY, the influence of the mesh refinement on peak shear and peel stress distributions is assessed. Joint stress predictions are carried out numerically in BEASY and ABAQUS®, and analytically by the models of Volkersen, Goland, and Reissner and Frostig et al. The failure loads for each model are compared with experimental results. The preparation, processing, and mesh creation times are compared for all models. BEASY results presented a good agreement with the conventional methods.